Tender For Providing Allied Works Regarding Tourism At Bhairavnath Temple In Vadnerbhairav Tal Chandwad Dist Nashik-Dismantling of cement concrete pavement by mechanical means using pneumatic tools, breaking to pieces not exceeding 0.02 cubic meter in volume and stock piling at designated locations and disposal of dismantled materials up to a lead of 1000 metres, stacking serviceable and unserviceable materials separately etc. complete. Excavation for roadway in earth, soil of all sorts, sand, gravel or soft murum including dressing section to the required grade, camber and side slopes and conveying the excavated materials with all lifts upto a lead of 50 metre and spreading for embankment or stacking as directed. Conveying materials obtained from road cutting including all lifts, laying in layers of 20 centimeter to 30 centimeter breaking clods, dressing to the required lines, curves, grades and section, watering and compacting to not less than 97% of standard Proctor density for a lead of over 50 meter to 300 meter inclusive from the site of excavation to the site of deposition as directed. Providing dry/ trap/ granite/ quartzite/ gneiss rubble stone soling 15 centimetre to 20 centimetre thick including hand packing and compacting etc. complete. Providing and laying Cast in situ/Ready Mix cement concrete in M-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, Steel centering, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based Programmable Logic Controller without Supervisory Control and Data Acquisition enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand/Crushed sand Vertical Shaft Impactor Grade finely washed etc) Providing and fixing heavy duty inter locking concrete, Rubber mould glossy paving blocks of 80 millimetre thickness of having a strength of 400 kilogram per Square metre of approved quality and shape on a bed of crushed sand of 25 to 30 millimetre thick including skirting joints and cleaning etc. complete. (using 100% crushed sand) Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing to proper grade and camber, applying and brooming requisite type of screening/ binding Materials to fill up the interstices of coarse aggregate, watering and compacting with Vibratory roller. to the required density. By Mechanical Means - Grading I (Using Screening Type A (13.2) millimetre Aggregate) Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification Including spreading in uniform thickness, hand packing to proper grade and camber, applying and brooming requisite type of screening/ binding Materials to fill up the interstices of coarse aggregate, watering and compacting with vibratory roller to the required density. By Mechanical Means - Grading II (Using Screening Type B (11.2 millimeter Aggregate) Providing and laying insitu cement concrete M-30 with tremix treatment for 200 mm thickness for Concrete Road is including laying plastic sheet for 125 micron thickness with groove cutting of 4 millimetre wide and 20 millimetre deep with necessary refilling with polysuphide sealent (Pouring grade) confirming to British Standards : 5212-1989 into sawed groove widened at top for sealent reservoir of specified size and shape as per detailed drawing including fixing Polyethylene foam backer rod of required diameter(excluding reinforcement) with coarsen and fine aggregate Using Vertical Shaft imapactor Quality Artifitial Sand etc.complete Providing and fixing in position Thermo Mechanical Treatment Ferrous material 500, 32 mm dia dowel bars precoated with anticorrosive epoxy paint of required Diametre 60 centimetre Long and at 30.00 centimetre. Centre to Centre and wherever directed including handling, straightening, necessary cutting supported by Thermo Mechanical Treatment Ferrous material 500, chairs with proper alignment by using properly designed assembly of Bulkheads lubricating half length with bituminous paint as directed etc. complete. Providing and fixing in position Thermo Mechanical Treatment Ferrous material 500, tie bars precoated with anticorrosive epoxy paint of 12 milimetre diametre 70 centimetre long and at 30.00 centimetre Centre to Centre and wherever directed including handling, straightening wrapping with paper of approved quality for half length, necessary cutting, handling, straightening, supported by assembly of Thermo Mechanical Treatment Ferrous material 500, chairs with proper alignment etc. complete. Providing and fixing board displaying information, such as Name of work, Tender cost, Name of Contractor, Work completion and liability period etc, having rectangular shape of 1.20 metre x 0.90 metre size made out 18 gauge (1.25 millimetre) thick mild steel sheet painted with one coat of Zinc chromate stoving primer and two coats of enamel paint on front side and grey stove enamel on back side and border/messages / symbols etc. with approved colour shade paint complete, on Mild Steel angle of size 35 X 35 X 3 millimetre frame with properly cross braced Mild Steel angles of size 35millimetre X 35 millimetre X 3 millimetre duly painted including Two Mild Steel angle iron posts of size 65 millimetre X 65 millimetre X 6 millimetre, 3.65 metre long painted with alternate black and white bands of 25 centimeter width including all fixtures etc.and fixing the boards in 1:4:8 concrete block of size 60 centimetre X 60 centimetre X 75 centimetre including, excavation, refilling, transportation, and labour etc complete. Spec. No. As directed by Engineer in Charge
