Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | CIVIL WORKS |
| 2 | Clearing grass and removal of rubbish upto a distance of 50 m outside the periphery of the area |
| 3 | Earthwork in excavation by mechanical means (hydraulic excavator) / manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sq.m on plan) including disposal of excavated earth lead upto 50 m and lift upto 1.5m disposed earth to be leveled and neatly dressed including providing barricading, danger lighting guarding as directed in : All types of Ordinary rock including all types of laterite rock, blasting prohibited |
| 4 | Earthwork in excavation by mechanical means (hydraulic excavator)/manual means in foundation pipeline trenches drain (not exceeding 1.5 m in width or 10 sq.m. on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m including getting out the excavated soil and disposal of surplus excavated soil as directed within a lead of 50 m. All kinds of soil |
| 5 | Refilling the pipeline/foundation trenches plinth sides, foundation etc. with available excavated earth in layers not exceeding 20 cm depth consolidating each layer ramming and watering lead upto 50 M and all lifts and disposal of surplus earth as directed by Engineer in Charge. |
| 6 | Carriage of debris from the site of work like excavated earth,demolished stones, rock boulders,vegetation etc, and disposing the same to a distance of 1.00Kms.including all lead and lifts etc. complete by means of tipper truck( contractor to indentify the site of disposal at his own cost and risk). |
| 7 | Brick work using common burnt building bricks in cement mortar 1:3 (1 cement : 3 coarse sand) with bricks of class designation 75 kg/ cm2 (wire cut bricks). In superstructure upto floor five level. |
| 8 | Rubble packing with hard laterite stone under floors including watering ramming and consolidating etc. in pipeline trenches and other foundations complete. |
| 9 | Laterite masonry in neatly dressed stones of size as specified in cement mortar 1: 4 (1 cement : 4 coarse sand) in foundation and basement. |
| 10 | Exposed decorative laterite masonary of stones as specified and laid as directed by architect in cement mortar 1: 4 (1cement: 4 coarse sand ) |
| 11 | Laterite masonry in neatly dressed stones of size as specified in cement mortar 1: 4 (1 cement : 4 coarse sand) above plinth Upto level V. |
| 12 | Providing and laying in position cement concrete 1:2:4 (1 cement : 2 coarse sand: 4 graded granitic or basaltic stone aggregate 40 m nominal size) excluding cost of centering, shuttering and finishing .All works upto plinth level |
| 13 | Providing & laying cement concrete 1:3:6 (1 cement: 3 coarse sand: 6 graded granitic or basaltic stone aggrt. 20 mm. nominal size) excluding cost of centering, shuttering and finishing in:All works upto plinth level |
| 14 | Providing and laying in position (1:11/2:3) Reinforced cement conrete excluding the cost of centering, shuttering, finishing and reinfrocement (1 cement: 1½ coarse sand:3 graded stone agg 20mm nominal size) All works upto plinth level |
| 15 | Providing and laying in position (1:11/2:3) Reinforced cement conrete excluding the cost of centering, shuttering, finishing and reinfrocement (1 cement: 1½ coarse sand:3 graded stone agg 20mm nominal size) ..In walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and structs etc. upto floor five level |
| 16 | Providing and laying in position (1:11/2:3) Reinforced cement conrete excluding the cost of centering, shuttering, finishing and reinfrocement (1 cement: 1½ coarse sand:3 graded stone agg 20mm nominal size) ..In beams, suspended floors, roofs having slope upto 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases upto floor five level |
| 17 | Centering & shuttering including Strutting, Propping & removal of forms for :Foundations, Footings, Bases for columns |
| 18 | Centering & shuttering including Strutting, Propping & removal of forms for :Columns, Piers, Pillars, Aburments, Posts and struts (square rectangle polygon in plan) |
| 19 | Centering & shuttering including Strutting, Propping & removal of forms for :Sides and Soffits of beams, Beam Haunchings, Cantilever, Girders, Bressumers and Lintels plinth beams not exceeding 1m in depth |
| 20 | Centering & shuttering including Strutting, Propping & removal of forms for sloping or battering surface (slabs, beams, louvers, etc) including folded plates i) Where inclination to the horizontal does not exceed 30° requiring shuttering on the underside only + Extra to be added for additional height in centering, shuttering where ever required with adequate bracing, propping etc. including cost of de- shuttering and de-centering at all levels, over a height of 3.5m, for every additional height of 1m or part thereof. (Plan area to be measured) Suspended floors, roofs, landings, beams and balconies (plan area to be measured)Where inclination to the horizontal exceeds 30° requiring shuttering on the underside & upperside if required (Only area of underside shall be measured for payment) |
| 21 | Providing TMT steel reinforcement bars of (SAIL, TATA. VIZAG, JSW Steel Ltd.) )(Confirming to IS 1786 of 1986) for RCC work (conforming to I.S. 1786 of 1986) including bending, binding & placing in position in all the floors along with the factory made precast concrete cover blocks of specified sizes whose compressive strength is not less than that of surrounding concrete in the structural member. |
| 22 | Providing woodwork in frames of doors, windows, clerestory windows trusses & other frames wrought framed and fixed in positon.:Second class Indian teak wood |
| 23 | Providing and fixing 38 mm thick panelled glazed or panelled and glazed shutters for doors, windows and clerestory window including black enamelled iron butt hinges with necessary screws:Second class Indian teak wood |
| 24 | Providing and fixing louvers 50 mm wide in grooves in clerestory window frames excluding the cost of frames.:Second class Indian teak wood 12 mm thick |
| 25 | Providing flat iron hold fast 40 cm including fixing to frame with 10 mm dia bolts, nuts and wooden plugs and embeded in cement concrete block 30 x 10 x 15 cm 1:3:6 mix (1 cement: 3 coarse sand: 6 stone aggregate 20 mm nominal size.: 40 x 3 mm flat iron hold fast, 15 cm long |
| 26 | Providing and fixing M.S. grill of required pattern in wooden frames of Windows etc. with M.S. flats square or round bars with round headed bolts and nuts or by by screws.:Plain grill |
| 27 | Providing and fixing bright finished brass butt hinges with necessary screws etc complete: 125 x 70 x 4 mm (ordinary type) |
| 28 | Providing and fixing bright finished brass tower bolts (barrel type) with screws etc. complete: 200 x 10 mm |
| 29 | Providing and fixing bright finished brass handles with necessary screws etc complete: 125mm |
| 30 | Providing and fixing bright finished brass door latch with necessary screws etc complete:250 x 16 x 5 mm |
| 31 | Providing & fixing bright finished brass 100 mm. mortice latch & lock & a pair of levers, handles with necessary screws etc. complete (Indian make of approved quality). |
| 32 | Providing and fixing 150 mm. bright finished brass floor door stopper with rubber cushion screws etc. to suit shutter thickness complete. |
| 33 | Providing and fixing brass hydraulic door closer of make Everest universal 68 or equivalent with necessary screws and fittings complete. |
| 34 | Providing and fixing factory made panelled door shutter fabricated out of second class teak wood with styles top and middle rail, lock and bottom rail with Navopan or equivalent weather resistant melamine faced prelaminated twin particle board - bonded with BWP/BWR exterior grade synthetic resin as per IS - 3087 (1985)type I including anodised aluminium butt hinges with necessary screws etc. complete.: 12 mm thick panel (iii) 30 mm thick |
| 35 | Providing and fixing flush door shutter of solid core melamine face three layered, prelaminated wood based particle board exterior grade having shade of choice on both sides (PTX) or having shade of choice on one side and balancing lamination on the other side (PLX) as per IS 3087 (1985) type I on the edge of Novopan or equivalent bonded with BWR/BWP synthetic resin with second class teak wood, lipping of section of size 12 mm x 30 mm flange and 18 mm x 10 mm web (18 mm deep) fixed into 18 x 10 mm groves of shutter with water resistant adhesive and fully threaded G.I. screws 50 mm not more than 450 mm centre to centre including anodized aluminium butt hinges with necessary screws etc. complete.:Natural teak on both faces:2) 30mm thick |
| 36 | FRP (Fiber Reinforced Polymer) Frames with Wood FinishManufacture, Supply and Installation (with anchor fastener) of EPEE or equivalent Goan make FRP (Fiber Reinforced Polymer) Frame of cross section as per options below with right angle joint and FRP (Fiber Reinforced Polymer) laminate made from 450 grams per sq.mts (gsm) chop strand glass fiber (matt) and unsaturated polyester resin with viscosity range of 400/450 centipoises per second (cps). The core of frame would be filled with seasoned wood as infill material. The slot of frame for door resting will be of suitable width so as to take specified thickness door. The frame will be water proof as well as mild acid/ alkali resistant manufactured in an ISO 9001- 2015 certified company.Accessories:i) S. S. Hinges 4” - 3 Nos ii) S. S. Latch - 1 No iii) Tower Bolt 5” - 2 Nos iv) Handle 5” - 2 Nos Shutter Thickness: a) 30mm |
| 37 | Providing and fixing anodized aluminium shutters in accordance with the specification annexed with Goa schedule of Rates (2004) Vol & II including all taxes, transportation, scaffolding and handling etc. complete as per direction of the Engineer-in-charge: windows with two sliding shutters using 18 mm series shutters section.:Figured glass |
| 38 | Providing and fixing anodized aluminium shutters in accordance with the specification annexed with Goa schedule of Rates (2004) Vol & II including all taxes, transportation, scaffolding and handling etc. complete as per direction of the Engineer-in-charge: Adjustable louvered windows.:Plain glass |
| 39 | Steel work in built up tubular (round, square or rectangular hollow tubes etc.) (Square Hollow Section (SHS) IS4923 /Rectangular Hollow Section (RHS) IS4923/ Circular Hollow Section (CHS) IS1161 closed Structural Steel of (SAIL, TATA. VIZAG, JSW ,APOLLO Steel Ltd.) make (Min Yeild Stress 310 Mpa)) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. |
| 40 | Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, plates etc.with hairline finish, including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer, ( for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). |
| 41 | Kotah stone slab flooring over 20 mm (average) thick base laid over & jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing & complete with base of cement mortar 1:4 (1 cement : 4 coarse sand): 20 mm thick. |
| 42 | Kotah stone slab flooring over 25 mm thick in risers of steps, skirtings, dado & pillars laid on 12mm (average) thick cement mortor 1:3 (1 cement : 3 coarse sand) & jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing & polishing complete. |
| 43 | Providing and laying jet black mirror polish granite flooring and dado over 20mm thick base of cement mortar 1:4 laid over and jointed with cement slurry including rubbling complete Granitic slab (jet blck with mirror polish) 20 mm thick add q0% wastage 1.00 |
| 44 | Providing 25 mm thick cuddapah slabs machine cut and polished on either side in partitions including making necessary grooves in the wall and fixing with cement mortar, complete as directed by the engineer-in-charge |
| 45 | Providing and and laying vitrified floor tiles in different sizes of Johnson, Somany, Kajaria (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make in colours and shades as specified laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand) including grouting the joints with white cement and matching pigment etc., complete:600x 600 mm Light Shades |
| 46 | Providing and laying factory made Shot blasted cement concrete interlocking paver block of minimum M35/M40 grade made by heavy duty block making machine with strong vibratory compaction and of aprpoved size and design / shape laid in 50 mm thick compacted bed of coarse sand, filling the joints with coarse sand, etc. all complete as per the direction of Engineer.- in I, Wave, Rectangular, Square etc. shapes. The products should comply to IS 15658:2006 and manfucatured by ISO9001: 2008 certified plant. The shot blasting should be done using 0.4-0.5mm dia steel shots with a speed of 3200 rpm.:60 mm thick in all colours except grey (M35 grade) |
| 47 | Providing and laying factory made Shot blasted cement concrete interlocking paver block of minimum M35/M40 grade made by heavy duty block making machine with strong vibratory compaction and of aprpoved size and design / shape laid in 50 mm thick compacted bed of coarse sand, filling the joints with coarse sand, etc. all complete as per the direction of Engineer.- in I, Wave, Rectangular, Square etc. shapes. The products should comply to IS 15658:2006 and manfucatured by ISO9001: 2008 certified plant. The shot blasting should be done using 0.4-0.5mm dia steel shots with a speed of 3200 rpm.:60 mm thick in Grey colour (M35 grade) |
| 48 | Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by theEngineer : Flamed finish granite stone slab.Elite Brown |
| 49 | Providing and fixing 18 mm thick gang saw cut,mirror polished, premoulded and prepolished,counters, window sills, facias and similar locations of required size, approved shade,colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand),joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Granite of any colour and shade, area of slab over 0.50 sqm:Cherry red |
| 50 | Providing and fixing colour coated galvulium roofing sheets of 0.5mm thickness including all the accessories (TATA make) but excluding the cost of purlins, rafters, trusses, flashings etc. complete as per the directions of the Engineer in charge. |
| 51 | Add for providing & fixing Flashings -[Corners, Ridges, valleys, gable end & Trims] (Girth upto 610mm) including all the accessories complete as per the directions of the Engineer in charge. |
| 52 | Providing and fixing Prince or equivalent make PVC SWR half round eaves gutter with bolts, nuts and flat iron brackets 40 x 3 mm size complete.-180 mm nominal size |
| 53 | Extra for providing and fixing prince or equivalent make PVC SWR joint bracket with 2 clamps for socketed half round eaves gutters.:180 mm nominal size |
| 54 | Extra for providing and fixing prince or equivalent make PVC SWR 90 deg. Elbow with/without outlet with 2 clamps for socketed half round eaves gutters.:180 mm nominal size |
| 55 | Extra for providing and fixing prince or equivalent make PVC SWR short stop ends for socketed half round eaves gutters.:180 mm nominal size |
| 56 | Providing water proofing treatment over the new R.C.C. roofs terrace toilet by spreading cement slurry over the R.C.C. slab and laying of 10cms. Average laterite stone ballast coba with the necessary gradient for easy flow of rain water and the coba in covered with damp proof of Hindustan water proofing co. Or equivalent jointless water proofing plaster of mix 1:3 ( 1 cement : 3 find sand), finished smooth with wooden trowel with false marking of 30 cms square. The vertical surface of the adjoining walls are to be treated upto a height of 30cms including rounding of junction (the rate includes for complete items including labour and materials and including cost of initial treatment of roof slab as follows. The injunction of damp proof or equivalent compound with cement solution will be given as and when found necessary for filling honey comb, cracks etc. in the R.C.C. slabs). NOTE: cement consumption 25 kg/sq.m. |
| 57 | Providing & Fixing of Metal Tile Ceiling System comprising of Tile of 600mm wide and 600mm long manufactured of 0.6mm thick Aluminium Clip-in perforated 2.5mm dia 5.5mm c/c. The Tile shall be manufactured on advanced equipment, which includes several levelling stages in the manufacturing process. Tile ends shall be raised with pips and stops to ensure positive engagement into the spring to enable for de-mounting of individual panels. The Tile sides shall be sufficiently high to ensure a minimum deflection across the length of Tile. All Tiles shall be bevelled edged. The Tile shall be polyester based, powder coated in White Colour. Tile shall be clipped into clip in profile of 0.5mm thick G.I. The clip in profile shall be supported from slab by means of rigid suspension of 4mm G.I. Rod, Hold on Clamp with Clip. Acoustic Felt: Non-woven felt made of glass-reinforced fibreglued over the perforation for sound absorption. |
| 58 | 12mm cement plaster 1:4 (1 cement : 4 fine sand) |
| 59 | 18mm cement plaster in two coats under layer 12mm thick cement plaster 1:5 ( 1 cement : 5 coarse sand) and top layer 6mm thick with cement plaster 1: 3 (1 cement : 3 coarse sand) finished with sponge. |
| 60 | 20mm cement plaster 1: 3 (1 cement : 3 fine sand) |
| 61 | 6mm cement plaster to ceiling 1: 3 (1 cement : 3 fine sand) |
| 62 | Neat Cement punning |
| 63 | 6mm cement plaster to ceiling 1: 3 (1 cement : 3 fine sand) Extra for plastering spherical ceiling |
| 64 | 20mm cement plaster 1: 3 (1 cement : 3 fine sand) Extra for providing and mixing water proofing material proportion recommended by the manufacturers. |
| 65 | 6mm cement plaster to ceiling 1: 3 (1 cement : 3 fine sand) Extra for plastering done on mouldings, cornices, or arch it raves including neat finish to line and level.In one coat |
| 66 | 12mm thick moulded cement mortar bands in cement mortar 1:4 (1 cement : 4 fine sand) cm per meter |
| 67 | Painting one/ two more coats with ordinary ready mixed paint of approved brand & manufacture in all shades except white or green on old work to give an even shade. |
| 68 | Painting two or more coats (excluding priming coat) with superior quality ready mixed paint for steel work of approved brand & manufacture in all shades on new work to give an even shade. |
| 69 | Painting (two or more coats) with synthetic enamel paint of approved brand and manufacture in all shade or new work over and under coat of suitable shade with ordinary paint of approved brand and manufacture to give an even shade |
| 70 | Wall painting (two or more coats) with plastic emulsion paint of approved brand and manufacture on new work to give an even shade. |
| 71 | Wall painting (one or more coats) with plastic emulsion paint of approved brand and manufacture on old work to give an even shade. |
| 72 | Painting three or more coats with acryllic exterior paint of approved brand and manufacture(such as weather shield,APEX) including applying one coat of cement primer and one coat of surface treatment etc. complete. |
| 73 | Painting one or more coats of acryllic exterior paint of approved brand and manufacture(Such as Dulex/ Asian Paints/ Sherwin Willians) on old work including cleaning the surface with water etc. complete. |
| 74 | Providing and applying white cement based putty of average thickness 1.00mm of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 75 | Demolishing laterite stone masonry in cement mortar including stacking of serviceable material & disposal of unserviceable material within 50 mts. lead. |
| 76 | Dismantling steelwork in built up sections in angles, tees, flats and channels including all gusset plates bolts, nuts, cutting dismembering and staking within 50 mts. Lead |
| 77 | Dismantling G.I. sheets roofing including ridges, hips valleys and gutters etc. and stacking the material within 50 meters lead. |
| 78 | Providing and fixing weepholes with rigid PVC make laid in position with a required slope and level while layingpipes of approved the concrete of retaining wall,wing wall and earth retainig structure complete as directed by the Engineer in charge:110 mm dia |
| 79 | Supplying and stacking of good earth at site including royalty and carriage upto 1 km. (earth measured in stacks will be reduced by 20% for payment). |
| 80 | Spreading of sludge, dung manure or/and good earth in required thickness (cost of sludge, dung manure or/and good earth to be paid separately). |
| 81 | 1) Grassing with “doob” grass including watering and maintenance of the lawn for 30 days or more till the grass forms of thick lawn free from weeds and fit for moving, including supplying good earth if needed. (Cost of “doob” grass not included )2) In rows 15 cm apart in either direction. |
| 82 | Digging holes in ordinary soil and refilling the same with the excavated earth mixed with manure or sludge in ratio of 2: 1 by volume (2 parts or stacked volume of earth after reduction by 20% and 1 part of stacked volume of manure after reduction by 40%) flooding with water, dressing including removal of rubbish & surplus earth if any with all leads & lifts (cost of manure or sludge of extra good earth if needed to be paid for separately)Holes 1.2m dia and 1.2m deep |
| 83 | Providing and fixing M.S. flat iron tree guard 60cm dia & 2 m high above ground level, formed of 4 nos. 25 x 6mm and 8 nos. 25 x 3mm vertical M.S. flat iron rings in two halves, bolted together with 8mm dia and 30 mm long bolts including painting two coats with paint of approved brand and manufacture over a coat of priming, complete in all respects. |
| 84 | Proving and fixing white vitreous china water closet squating (European type w.c. pan) with seat and lid, C.P. brass hinges and rubber buffers 10 lts. High level P.V.C.. flushing cistern (of approved make ) with fittings, rack bolts 32 mm diameter P.V.C. telescopic flush pipe with fit tings and clamps 25mm P.V.C.. over flow pipe with specials & mosquito proof coupling of approved municipal design and nylon. chain and pull complete, cutting and making good the walls ad floors where required.:W.C. pan with white plastic seat and lid. |
| 85 | Providing and fixing vitreous china wash basin with R Sor C.I.brackets painted white,15mm C.P. brass pillar taps C.P. brass chain with rubber plug 32 mm C.P. brass waste of pattern, 32 mm diameter M.I. or C.P. brass trap and union complete, including cutting and making good the walls where required.:Flat back wash basin size 550 x 400mm with a single 15 mm C.P. brass pillar taps. |
| 86 | Providing & fixing (4’) 100 mm sand cast iron grating for gully floor or nahni trap. |
| 87 | Providing and fixing 600 x 450 mm bevelled edge mirror of superior glass (of approved quality) complete with 6 mm thick asbestos sheet ground fixed to wooden cleats with C. P. brass screws and washers. |
| 88 | Providing and fixing toilet paper holder :C.P. brass |
| 89 | Providing & fixing liquid soap container with C.P. brass lid and brackets fixed to wooden cleats with C. P. brass screws a)Glass container |
| 90 | Providing and fixing white vitreous china type water closet squatting pan (european type w.c. pan) with flush valve Nelson/ similar) fully chromium plated with stop cock wall flanges flush pipe or elbow and vaccu.m breaker coupling etc. including cutting making good the walls and floors where required. |
| 91 | Providing and fixing brass bib cock (heavy) of approved quality :15 mm nominal bore |
| 92 | Providing and fixing brass stop cock (heavy) of approved quality : a)15 mm nominal bore |
| 93 | Providing and fixing brass stop cock (heavy) of approved quality :b)20 mm nominal bore |
| 94 | Providing and fixing brass stop cock (heavy) of approved quality : c)25 mm nominal bore . |
| 95 | Providing and fixing brass stop cock (heavy) of approved quality :d)32 mm nominal bore |
| 96 | Providing and fixing brass full way valve (heavy) duty with wheel of approved quality :a)15 mm nominal bore |
| 97 | Providing and fixing brass full way valve (heavy) duty with wheel of approved quality :b)20 mm nominal bore |
| 98 | Providing and fixing ball valve (brass) of approved quality :a) High pressure with P.V.C. floats: 25mm nominal bore |
| 99 | Providing and fixing non-return valve of approved quality :a)25 mm nominal bore |
| 100 | Providing and fixing non-return valve of approved quality : b)32 mm nominal bore |
| 101 | Providing and placing on terrace roof of floor two (1st flor roof single piece rotational moulded polythene water storage tank having I S I mark and conforming to I S 12701; 1996. c) 1000 lit. capacity |
| 102 | Providing and fixing square-mouth S.W. gully trap grade ‘A’ complete with c.i. grating brick masonry chamber and water tight C.I. cover with frame of 300 x 300 mm size (inside the weight of cover to be not less than 4.53 kg). And frame to be not less than 2.72 kg as per standard design : a)100 x 100 mm size P type |
| 103 | Constructing brick masonry manhole or inspection chamber with second class bricks in cement mortar 1:5 (1 cement :5 fine sand) R.C.C. top slab with 1:2:4 mix (1 cement: 2 coarse sand;4 graded stone aggregate 20mm nominal size foundation concrete 1:2:4 mix (1 cement ;2 coarse sand :4 graded stone agrregate 40mm nominal size) inside plastering 12 mm thick with cement mortar 1:3 (1 cement :3 coarse sand) finished with a floating coat of neat cemetn and making channels in cement concrete 1:2:4 mix (1 cement :2 coarse sand :4 graded stone aggregate 20 mm nominal size) neatly finished complete as per standard design.: d)Inside size 60 x 60cm and 60cm deep including C.I. cover with frame (light duty) 455x610mm internal diameter total weight of cover and frame to be not less than 38 kg. (weight of cover 23 kg). |
| 104 | Constructing soak pit 1.20m x 1.20m x1.20m filled with laterite stone aggregate 125 to 180 mm including S.W. drain pipe 100 mm diameter and 1.2m. long complete as per standard design. |
| 105 | Providing and fixing rigid PVC S.W.R. (soil, waste & rain water) drainage pipes of approved including lubricant etc. complete (single/double) socketed: a)110 mm dia |
| 106 | Providing and fixing rigid PVC bend of required degree (of approved make) for S.W.R. drainage pipes of approved including lubricating etc complete bend with door :a)100 mm dia |
| 107 | Providing and fixing single tee of rigid PVC (approved make) for S.W.R. pipes including lubricating etc. complete, without door: a)110 mm dia |
| 108 | Providing and fixing single “Y” of rigid PVC (approved make ) for S.W.R. pipes including lubricating etc complete, without door :a)110 mm dia |
| 109 | Providing and fixing nahani trap of rigid PVC (approved make ) for S.W.R. pipes including lubricating etc complete, without door 110 dia a)110mm dia |
| 110 | Providing and fixing R.P.V.C. vent cowl: a)110 mm dia |
| 111 | Providing and fixing NICKEL chrome plated copper alloy Fancy BIB Cock Short Body Jaquar make or equivalent. Confirming to IS 8931;1993 a)15mm nominal bore |
| 112 | Providing and fixing NICKEL chrome plated copper alloy Fancy long body bib cock with wall flance Jaquar make or equivalent. Confirming to IS 8931;1993 a)15mm nominal bore |
| 113 | Providing and fixing NICKEL chrome plated copper alloy Fancy concealed stop cock with slinding flance 15 mm Jaquar make or equivalent. Confirming to IS 8931;1993 a)15mm nominal bore |
| 114 | Providing and fixing NICKEL chrome plated copper alloy Fancy BOTTLE TRAP ECONOMY TYPE 32MM Jaquar make or equivalent. Confirming to IS 8931;1993 |
| 115 | Providing and fixing chlorinated ployvinyl chloride (CPVC) pipes confirming to IS:15778, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipes with clamps at 1 mt. spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of the Engineer-in-charge. Internal work exposed on wall (Medium duty SDR 13.5pipe). a)15 mm outer dia CPVC pipe |
| 116 | Providing and fixing chlorinated ployvinyl chloride (CPVC) pipes confirming to IS:15778, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipes with clamps at 1 mt. spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of the Engineer-in-charge. Internal work exposed on wall (Medium duty SDR 13.5pipe).b) 20 mm outer dia CPVC pipe |
| 117 | Providing and fixing chlorinated ployvinyl chloride (CPVC) pipes confirming to IS:15778, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipes with clamps at 1 mt. spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of the Engineer-in-charge. Concealed work (medium duty SDR 13.5 pipe) including cutting chases and making good the walls etc.a)15 mm outer dia CPVC pipe |
| 118 | Providing and fixing chlorinated ployvinyl chloride (CPVC) pipes confirming to IS:15778, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipes with clamps at 1 mt. spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of the Engineer-in-charge. Concealed work (medium duty SDR 13.5 pipe) including cutting chases and making good the walls etc.b)20 mm outer dia CPVC pipe |
| 119 | Providing and fixing chlorinated ployvinyl chloride (CPVC) pipes confirming to IS:15778, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipes with clamps at 1 mt. spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of the Engineer-in-charge. Concealed work (medium duty SDR 13.5 pipe) including cutting chases and making good the walls etc.c)25 mm dia nominal outer dia pipes. |
| 120 | Providing and fixing chlorinated polyvinyl chloride (CPVC) pipes confirming to IS: 15778 having thermal stability for hot and cold water supply includng all CPVC plain and brass threaded fittings CPVC solvent cement, trenching, refilling and testing of joints complete as per firectionof the Engineer in charge.(External work (heavy duty SDR 11 pipe) c)25 mm nominal outer dia pipes. |
| 121 | Providing and fixing chlorinated polyvinyl chloride (CPVC) pipes confirming to IS: 15778 having thermal stability for hot and cold water supply includng all CPVC plain and brass threaded fittings CPVC solvent cement, trenching, refilling and testing of joints complete as per firectionof the Engineer in charge.(External work (heavy duty SDR 11 pipe) d)32 mm nominal outer dia pipes. |
| 122 | Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS 13983 including cutting of stone and making good the walls wherever required. Kitchen sink without drain board. with coupling & all accessories complete with choke stop strainer, Plain type having flat borders for correct sandwithing between the plaform top and bottom slabs complete. a)Overall size 610mmx510mm (24\"x20\") bowl size 545mmx445mmx200mm (211/2\"x 17 1/2\"x 8\") depth 200 mm. Glossy. 1.0mm thk, |
| 123 | Providing and fixing Hand Shower (Health Faucet) with 8mm dia, ABS/brass body with double lock 1.00m long Flexible tube (Brass plated stainles steel flexible hose) and wall hook of approved quality confirming to IS standards. |
| 124 | Providing and fixing NICKEL chrome plated copper alloy Fancy Two Way Bib Cock with single knob and wall flange conforming to IS 8931:1993 15mm nominal bore. |
| 125 | Providing and fixing ASTM UPVC pipe, conforming to ASTM 2467 with ISO 14001, including all UPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step UPVC solvent cement and testing of joints complete as per direction of Engineer. Internal work - Exposed on wall. I)SCH-80(blue)/(white) a)20mm outer dia. |
| 126 | Providing and fixing ASTM UPVC pipe, conforming to ASTM 2467 with ISO 14001, including all UPVC plain & brass threaded fittings, including jointing of pipes & fittings with one step UPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer. External work. I) SCH-40(blue)/(white) a)20mm outer dia. |
| 127 | Providing and fixing NICKEL chrome plated copper alloy Fancy Bib Cock with extended lever handle and wall flange Confirming to IS 8931; 1993 a)15mm nominal bore |
| 128 | Providing anti – termite treatment to buildings conforming to I.S.S. 6113 part II 1971 (revised) including adopting precautions for health hazards and safety measures as required therein with the cost of all materials, chemicals, plants, equipments required for the treatment and furnishing a guarantee for a minimum period of 10 years from the date of completion including eradicating any infestation of termite free of cost during the guaranty period complete. (Thepayment will be made on plinth of the building). a)Pre-construction |
| 129 | Providing anti – termite treatment to buildings conforming to I.S.S. 6113 part II 1971 (revised) including adopting precautions for health hazards and safety measures as required therein with the cost of all materials, chemicals, plants, equipments required for the treatment and furnishing a guarantee for a minimum period of 10 years from the date of completion including eradicating any infestation of termite free of cost during the guaranty period complete. (Thepayment will be made on plinth of the building).b)Post construction |
| 130 | PVC false ceiling grid type : Providing and fixing PVC False Ceiling consisting of 600mm x 600mm, 5mm(±0.25) thick Plain PVC sheet of 600 kg/Cbm Density Manufactured by an ISO- 9000 certified Company, used as panel insert in a frame work made using anodized aluminum T- section of sizes 1” x1” (25x25mm, 19 gauge or 1mm thick) in square pattern of grid sizes of 2’x2’(600x600mm). The aluminum frame work is supported from the ceiling with the help of \"J\" hook and G.I. wire / 6mm M.S. rods of required sizes to maintain proper level etc. The aluminum framework is supported on side wall with the use of aluminum L-section of size 1”x1” (25x25mm) angles etc. Complete as per direction of Engineer-In-charge, manufacturer’s specification & drawing. |
| 131 | Fabrication and fixing of Aluminium composite panel cladding with thick 3mm/ 0.25mm ACP sheets, aluminium framework, with 50 X 25 X1.2 mm thick sections. Silicon sealants etc. including accessories complete. |
| 132 | Providing and laying laterite flooring 160mm thick with Hard laterite stone as shown in the drawings, layed over bed earth, filling the joints with grass, including as approved by the engineer, etc complete.crushing strength of patradevi/hard laterite stone not less than 70kg/sqcm |
| 133 | Providing and fixing statues (Lion statue 3D view) made up of POP of size 3.45ft x 4ft including all fitting fixtures , Finish should be similar to the photo features references,concepts of historic era\"s including all tools, plants, labour and materials, leads, lifts etc complete. as directed by Engineer-In-Charge. |
| 134 | Fabricating, providing & fixing signages using 304 grade stainless steel 1.5mm thick brushed steel finish plate with eched lettering . SS plate of required size as shown in drawing will be fixed to the wall/ door/wooden partition with SS studs, complete. Refer drawing SCSPL/DIET/SIGN |
| 135 | Supply and installation of dustbin of size 15\" dia.and 30\"ht. NDC or equivalent,brown wood slated finish with pastel blue green lids (refer Image) made up of FRP consisting of Binani matt fibres with GP Resin and Hardener having a minimum of 600 GSM for small size products upto 2400 GSM for large size products for stability and durability.Dustbin must be paint by Duco NC base paint of choice as per RAL code/Duco Catalogue for good quality surface finish.The surface of dustbin must be smooth matt finish. All tools, plants, labour and materials, leads, lifts, etc complete. as directed by Engineer-In-Charge. |
| 136 | Providing and fixing of cast iron & FRP benches made up of cast iron powder coated frames and FRP strips connected to the frames with GI nut bolt and GI clamps etc. Complete fitting length 5 feet standard in size. All tools plants, machinery, lifts, transportation complete. |
| 137 | Supply, installation,testing and commissioning of 50 MM x 40 MM Horizontal Openwell Submersible pump having Cast Iron casing with Cast Iron impeller, AISI 410 shaft. Pump with 5 HP 2880 RPM 415 Volts, 50 Hz Ac 3 phase electric motor. Capacity: 270 / 220 LPM @ 32 / 36 MTR. Total head and Digital Control panel with float switch for 2 x 5 HP Submersible Pumpsets comprising of under volts / over volts protection, reversal phase protection,Dry running protection. |
| 138 | Providing, installing and Commmissioning of Aquaguard eureka forbes or equivalent, Commericial & Industrial Water Treatment Plants Skid mounted type RO Plant of 500 litres/hr capacity. The plant shall house pressure sand filter (PSF) and activated carbon filter (ACF) with the capacity pf 1300 LPH, reverse osmosis system with capacity of 250LPH, antiscalant dosing sysytem, micron cartridge filter, high pressure pump with the capacity of 1300 LPH, UV system and other required accessories excluding the cost of raw and clear storage tank. All plants, equipments, tools, machinery, leads, lifts complete. |
| 139 | Providing, installing and commissioning of water cooler of bluestar make or equivalent with partial stainless steel material of 80 litre capacity. All plants, equipments, tools, machinery, leads, lifts complete. |
| 140 | Preparation and Surface Treatment of formation. (Preparation and surface treatment of formation by removing mud and slurry, watering to the extent needed to maintain the desired moisture content, trimming to the required line, grade, profile and rolling with 8-10 tonne smooth wheeled roller, complete as per clause 310.) |
| 141 | Scarifying existing bituminous surface to a depth of 50 mm by mechanical means (Scarifying the existing bituminous road surface to a depth of 50 mm and disposal of scarified material with in all lifts and lead upto 1000 metres.) |
| 142 | Bituminous Macadam (Providing and laying bituminous macadam with 100-120 TPH hot mix plant producing anaverage output of 75 tonnes per hour using crushed aggregates of specified grading premixed with bituminous binder, transported to site, laid over a previously prepared surface with paver finisher to the required grade, level and alignment and rolled as per MORT& H Specifications, Fifth Edition for Grading I ( 40 mm nominal size ) |
| 143 | Excavation for roadway in soil by mechanical means including cutting and pushing the earth to site of embankement lead 50 metres), including trimming bottom and side slopes in accordance with requirements of lines, grades and cross sections.as per MORTH Specification 301 |
| 144 | Supplying and fixing Pre-cast cement concrete kerb-stones(factory made,the factory should be ISO certified and registered under Dirctorate of Industries, Govt. of India) of M-20 with 20 mm nominal size granitic/basaltic aggregate properly consolidated by mechanical plat-form and vibrators with smooth finish including fixing at site complete as per specification.(a) Size 30 cm L x 50 cm H x 15 cm T |
| 145 | Supplying and fixing of Precast RCC slabs(factory made,the factory should be ISO certified and registered under Dirctorate of Industries, Govt. of India) at site in concrete Grade of M-25 with 20 mm nominal size Granitic or basaltic aggregate, consolidated by means of mechanical platform, vibration etc. with lifting hooks of M.s. 10mm bars and PVC cups including cost of reincforcement, Certificate from manufacturer shall be produced indicating grade of concret and minimum content of steel in the product along with 5 year free replacement warranty in case of breakage complete and as directed by Engineer -in -charge. a)Size 900 x 400 x 150 mm with steel reinforcement not less than 7 kg per unit -30 T capacity |
| 146 | Supplying and fixing of Precast RCC slabs(factory made,the factory should be ISO certified and registered under Dirctorate of Industries, Govt. of India) at site in concrete Grade of M-25 with 20 mm nominal size Granitic or basaltic aggregate, consolidated by means of mechanical platform, vibration etc. with lifting hooks of M.s. 10mm bars and PVC cups including cost of reincforcement, Certificate from manufacturer shall be produced indicating grade of concret and minimum content of steel in the product along with 5 year free replacement warranty in case of breakage complete and as directed by Engineer -in -charge. b)Size 700 x 500 x 75 mm with steel reinforcemnt not less than 3.0 kgs per unit |
| 147 | Supplying and stacking laterite stones of size 150-200 mm(contractor\"s stone) for soling at site |
| 148 | Laying stone soiling including packing with smaller stones and consolidation with road roller including spreading, watering and consolidating of binding material Murrum or earth etc.(payment to be made for quantity of only soling stone used excluding binding material) |
| 149 | Providing and applying tack coat with bitumen grade of 80/100 or bitumen emulsion using pressure distributor on the prepared bituminous/granular surface cleaned with mechanical broom as per MoRT&H specifications clause 503. |
| 150 | Providing and laying bituminious concrete with 40-60 TPH Drum Mix type Hhot mix plant producing an average output of 50 tonnes per hour using crushed aggregates of specified grading, premixed with bituminious binder to mix with filler, transporting the hotmix to work site, with all leads laying with a Mechanical paver finisher to the required grade, level and alignment, using antistripping agent rolling with smooth wheeled, vibratory or tandem rollers to achieve the desired compaction complete as per Mort& Specifications Clause 509 Grade-II (13mm nominal size) @ 6.5% Bitumen of grade 60/70 Antistripping agent @ 0.5% of bitumen content |
| 151 | Providing and laying 30 mm thick Bituminious/Asphaltic concrete with 40-60 batch type HMP producing an average output of 50 tonnes per hour using crushed aggregates of specified gradings Premixed with bituminious binder at 6.5 % by weight of total mix and fillerusing Antistripping agent transpoting the hotmix to work site with all leads and applying a tack coat @f 2.00 kg/10sq.m. with hot bitumen of 80/100 and laying with Mechanical Paver finisher to the required grade, level and alignment, rolling with smooth wheeled, vibratory or tandem rollers to achieve the desired compaction as per MORT&H specifications clause 509 and 503 a) Antistripping agent @ 0.5% of bitumen content |
| 152 | Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm isexclusive of surface applied glass beads as per IRC : 35. The finished surface to be level uniform and free from streaks and holes as per MORTH Specification 803 |
| 153 | ELECTRICAL WORKS |
| 154 | Street Light Panel: Supply, Installation, testing and commissioning of LT panel IP- 67 outdoor type,floor mounted Panels shall be suitable for 415 V, 3 phase, 4 wire, 50Hz Supply system. With 3 phase energy meter and 63A TPN MCB as incommer and 8 nos 16 A TPN MCB as outgoing with microcontoller based programmable digital Almac timer with voltage stabilizer, outdoor body should be powder coated. As shown in SLD. |
| 155 | Supply of 4 core armoured PVC/XLPE insulated, PVC sheathed aluminium conductor cable of 1.1 KV grade with ISI mark conforming to IS:1554(Part I) ,IS:7098(Part I) with latest amendments of following size. A) 4 Core 10 sq.mm |
| 156 | Supply of 3 1/2 core armoured PVC/XLPE insulated, PVC sheathed aluminium conductor cable of 1.1 KV grade with ISI mark conforming to IS:1554(Part I) ,IS:7098(Part I) with latest amendments of following size.a) 3 1/2 Core 35 sq.mm |
| 157 | Supply of 3 core unarmoured PVC/XLPE insulated, PVC sheathed copper conductor cable of 1.1 KV grade with ISI mark conforming to IS:1554(Part I) ,IS:7098(Part I) with latest amendments of following size. A)3 Core 2.5 sq.mm |
| 158 | Supplying and making cable end terminations with brass compression gland and copper lugs for folowing sizes of 4 Core PVC insulated PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade, complete as required.(a) 4 x 10 Sq. mm. |
| 159 | Supplying and making cable end terminations with brass compression gland and aluminium lugs for folowing sizes of 3 1/2 Core PVC insulated PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade, complete as required.(a) 3 1/2 x 35 Sq. mm. |
| 160 | Supplying and making cable end terminations with brass compression gland and copper lugs for folowing sizes of 3 Core PVC insulated PVC sheathed /XLPE aluminium conductor cable of 1.1 KV grade, complete as required.(a) 3 x 1.5/2.5 Sq. mm. |
| 161 | Laying of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV grade of size not exceeding 25 sq.mm direct in ground including excavation in the form of a trench as per Cable Trench Drawing provided by the Engineer-Incharge, sand cushioning with screened sand bed of 20mm thick, protective covering with bricks placed breadth-wise on top of cable all over the run( the brick protection shall cover the cable and project atleast 5 cms over the sides of the cable) and backfilling the excavated earth without stones or hard material and making the surface proper with 15 cm crown on the top complete as required.(b) In rocky strata |
| 162 | Laying of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV grade of size exceeding 25 sq.mm but not exceeding 120 sq.mm direct in ground including excavation in the form of a trench as per Cable Trench Drawing provided by the Engineer-Incharge,sand cushioning with screened sand bed of 20mm thick , protective covering with bricks placed breadth-wise on top of cable all over the run (the brick protection shall cover the cable and project atleast 5 cms over the sides of the cable) and backfilling the excavated earth without stones or hard material and making the surface proper with 15 cm crown on the top complete as required.(b) In rocky strata |
| 163 | Laying of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV grade of size exceeding 25 sq.mm but not exceeding 400 sq.mm in the existing RCC /HUME / STONEWARE Metal pipe, etc. complete as required |
| 164 | Earthing with GI earth pipe 2 mts long 40 mm dia medium class with ISI mark,of approved brands, including accessories and providing masonry enclosure with CI/RCC cover having locking /lifting arrangement and watering pipe etc. with charcoal or coke and salt) as required as per the Earthing Drawing provided by the Engineer-Incharge.The scope of work includes the following: a) Excavation of pit of size 1.0x1.0x 2.0 mtrs(min) and disposal of excavated soil. b) Class B GI pipe, 40mm diameter as per specifications. c) Charcoal/salt as per specs. d) Refilling the pit of size 1.0x1.0x 2.0 mtrs(min) with soft black soil of minimum resistivity i/c transportation. e)Masonary chamber with proper foundation, cover plate and locking arrangement. f) Testing of earth value with earth megger and certifications of its value. Aluminium tag with embossed earthing value to be attached to the pipe. g) watering arrangement(b) In rocky strata |
| 165 | Providing and fixing 6 SWG dia GI wire on surface or in recess for loop arthing along with existing surface/ recessed conduit/ submain wiring/ cable as required |
| 166 | Providing and fixing 25 mm x 5 mm GI strip on surface or in recess for coneections etc. as required |
| 167 | Supply and erection of 8 Mtrs Octoganal Pappeared H.D.G.I pole made out of 4 m.m. thick plate and heavy provision for cable entry, having weight not less than 97kg. 4 Nos of J type M24x 750mm long foundation bolts of grade EN 8 as specified by GED. Along with suitable arm and LED fixture of inled make specified by GED of 80 W |
| 168 | Supplying and fixing 6 A to 32 A, C series MCB suitable for lighting and other loads of following poles in the existing MCB DB complete with connections testing and commissioning etc as required. (a) SP, Cat A |
| 169 | Laying and fixing with collars light duty non-pressure NP 2 class R.C.C. pipes with cement mortar in proportion 1:2 (1 cement : 2 fine sand) in joints including cost of jointing material etc. complete.a) 300 mm dia pipe |
| 170 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor single core cable in the independent surface/ recessed FRLS PVC conduit of appropriate size as required.(b) 2 x 2.5 sq.mm + 1 x 2.5 sq.mm earthwire (20mm Conduit) |
| 171 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor single core cable in the independent surface/ recessed FRLS PVC conduit of appropriate size as required.(c) 2 x 4 sq.mm + 1 x 4 sq.mm earthwire (20mm Conduit) |
| 172 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface/ recessed PVC conduit with modular switch, modular plates, suitable size modular GI box of specified Category and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.(c) Group C -- with Cat A Modular Accessories |
| 173 | Wiring for group controlled light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface/ recessed PVC conduit and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. |
| 174 | Supplying and fixing suitable size modular GI box with modular plate and cover in front on surface or in recess including providing and fixing 3 pin 5/6 A modular socket outlet and 5/16 A modular switch connection painting etc. as required.(a) Cat A |
| 175 | Supplying and fixing suitable size modular GI box with modular plate and cover in front on surface or in recess including providing and fixing 6 pin 15/16 A and 5/6 A modular socket outlet modular socket outlet and 15/16 A modular switch connection painting etc. as required.a) Cat A |
| 176 | Supplying and fixing modular blanking plate on the existing modular plate switch box excluding modular plate etc. as required (a) Cat A |
| 177 | Supply and erecting of 12 inch (300 mm sweep) exhaust fan, 1400 rpm, complete with all accessories. (a) Cat A |
| 178 | Supplying and fixing stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required (a) Cat A |
| 179 | Supply and erecting fan hook box (100 mm diameter or equivalent square size, 75mm deep) fabricated out of 16 SWG sheet steel with 10 m round bar hook bounded to RCC steel upto 50 mm length protruding on each side of the box, including painting with 2 coats of red oxide, complete as required. |
| 180 | Supply and erecting of 56 inch (1400 mm sweep) ceiling fan, double ball bearing type, complete with all accessories. (a) Cat A |
| 181 | Supplying and erecting LED surface lights of 5 to 8 W, 230V Intergral type with required driver and all the required accessories of Legro, Wipro, crompton, Bajaj, havels make or equivalet approved by Engineer - in - Charge complete as required. |
| 182 | Supply, Erection,Testing & Commissioning of 20 - 24 W LED TubeLight luminaire.with required Driver and other accessories of Legro, Wipro, crompton, Bajaj, havels or equivalent make approved by Engineer - in - Charge complete as required. |
| 183 | Supplying and fixing following way SPN sheet steel MCB distribution board 240 V on surface/ recess complete with tinned copper busbar neutral busbar earth bar dinnbar detachable gland plate interconnections phosphotized and powder painted including earthing etc. as required ( but without MCB/RCCB/Isolator) (c) 12 way single door Cat A |
| 184 | Supplying and fixing 6 A to 32 A, C series MCB suitable for lighting and other loads of following poles in the existing MCB DB complete with connections testing and commissioning etc as required. (e) TPN, Cat A |
| 185 | Supply and erecting meter box suitable for three phase energy meter and incoming SP/DP MCB, fabricated out of 16 SWG sheet steel, powder coated, complete as required and conforming to the requirements of Goa Electricity Deaprtment. |
| 186 | Supply, installation, testing and commissioning of electronic type three phase energy meter (KWh), 4 wire, ISI marked, in polycarbonate or sgheet steel body ( base mounting type) with counter display/LCD display, with ELT, in Class 1.0, 50 Hz, 240 V. AC duly tested by MRT along with Test Certificates, complete as required of following capacity of make L & T only.(b) 10 to 40 A |
| 187 | Supplying and fixing SP blanking plate in the existing MCB DB complete as required Please Enable Macros to View BoQ information |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2026 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
