To Carry Out Improvement Works Regarding Open Gym Material At Shaheed Hemant Karkare Udyan Hadapsar.-ITEM NO : 1 Horizontal Bar Providing & fixing Horizontal Bar of height 2.1 mtr. from G.L. with G.I. Pipes of ‘C’ Class quality. The frame of the Horizontal bar shall be of 25 mm NB pipe. The vertical support pipe of 75 mm NB pipe. The total play area for the equipment shall be 3 m wide.The foundation pipes are embedded in C.C. stock of size 0.45 x 0.45 x 0.3 m below ground level and painting is done by attractive color spraying after proper surface treatment, Shot blasting and initial coat of yellow primer surface is applied before top coat. The top coat is done using the best quality brand paint or duly powder coated of minimum 60 micron thickness. All open ends of pipe been closed by GI / HDPE caps for user safety against entrapment etc all. Rate inclusive of labour, material, , transport, etc complete all. Work done should be as per engineer incharge ( SSR Item No : 2 ) (PMC Garden ) Unique No (19623) Rate List Year (2024-2025) ITEM NO : 2 Parallel Bar Providing & fixing parallel Bar of height 1.3 mtr. From G.L. with G.I. Pipes of ‘C’ Class quality. The horozontal parallel bar shall be of 40 mm NB pipe and vertical supports of 75mm pipe. The total play area for the equipment shall be 0.9 x 0.5 m. The foundation pipes are embedded in C.C. stock of size 0.45 x 0.45 x 0.3 mbelow ground level and painting is done by attractive color spraying after proper surface treatment, Shot blasting and initial coat of yellow primer surface is applied before top coat. The top coat is done using the best quality brand paint or duly powder coated of minimum 60 micron thickness. All open ends of pipe been closed by GI / HDPE caps for user safety against entrapment etc all. Rate inclusive of labour, material, , transport, etc complete all. Work done should be as per engineer incharge ( SSR Item No : 3 ) (PMC Garden ) Unique No (19624) Rate List Year (2024-2025) ITEM NO : 3 Leg Press Providing and fixing Leg Press made from “B” Class G.I. pipe. The center pipe is of 100mm NB made from “C” Class G.I. pipe, and the bottom support of M.S. Round plate of 250 mm diameter & 10mm thickness is welded at bottom. The remaining outer frame is of 40mm NB made from “C” class G.I. pipe. The foundation used for fixing is consist of three equal items i.e. 80mm NB made from “C” class G.I. pipe, M.S. Round plate of 250mm dia & 10mm thickness, 25 mm X 25 mm X 3mm M.S.angle. To join the centre pipe & outer frame seamless pipe of 130 mm dia & 3mm thickness is used. The seats are fitted on the outer frame is made up of FRP material of size 330 mm X 330 mm of thickness 3 mm & M.S. Plate of thickness 5mm and Size 250 mm X 200 mm is used to support it. The footrests is made from FRP/C.I./Aluminum casting material, its sizes are 130 mm X 300 mm & 5 mm thickness. The frame of footrests consists of 25 NB made from “C” class G.I. pipe. Closing caps made from top quality FRP material which is of 2 mm thickness. The inner bushes are made from seamless pipe, its diameter is60mm& 8mm thickness. The pins used in are made up of 25 mm diameter hardened bright bar. The bearings used are of “6205” permanent lubricated sealed bearing of reputed make like SKF, FAG. The handles used are of Rubber grip. The Nut Bolts used for assembly are made from S.S. material. The bushes (stopper) used to avoid the collusion made from Poly Urethin Plastic material of 50 mm diameter. The serclip used for assembly are of 25mmdiameter. foundation pipes are embedded in C.C. stock of size 0.45 x 0.45 x 0.3m below ground level and painting is done by attractive color spraying after proper surface treatment, Shot blasting and initial coat of yellow primer surface is applied before top coat. The top coat is done using the best quality brand paint or duly powder coated of minimum 60 micron thickness. All open ends of pipe been closed by GI / HDPE caps for user safety against entrapment etc all. Rate inclusive of labour, material, , transport, etc complete all. Work done should be as per engineer incharge. ( SSR Item No : 7 ) (PMC Garden ) Unique No (19628) Rate List Year (2024-2025) ITEM NO : 4 Arm & Paddle Bike Providing and fixing Cycle made from “B” class G.I. Pipe. The main frame of Ø40mm made from “C” Class G.I. pipe. For the support of foot pedal M.S. round plate of Ø250 mm & 10mm thickness is used. The handle frame is of Ø32mm made from “C” Class G.I. pipe. The seats is fitted on the frame is made up of high quality FRP material of size 330 mm X 300 mm of thickness 3 mm & M.S. Plate of thickness 5 mm and Size 250 mm X 200 mm is used to Support it. The foundation used for fixing is consists of 25 mm X 25mm M.S. angle of 3 mm thickness. Closing Caps made from top quality FRP material with 2 mm thickness. The pins used are made up of Ø 25mm bright bar. The bearings used are “6205zz” permanent lubricated sealed bearing of reputed make (SKF/FAG). High tensile steel with galvanized nut bolts are used for assembly. The serclips used for assembly are of Ø25 mm. The foundation pipes are embedded in C.C. stock of size 0.45 x 0.45 x 0.3m below ground level and painting is done by attractive color spraying after proper surface treatment, Shot blasting and initial coat of yellow primer surface is applied before top coat. The top coat is done using the best quality brand paint or duly powder coated of minimum 60 micron thickness. All open ends of pipe been closed by GI / HDPE caps for user safety against entrapment etc all. Rate inclusive of labour, material, , transport, etc complete all. Work done should be as per engineer incharge. ( SSR Item No : 8 ) (PMC Garden ) Unique No (19629) Rate List Year (2024-2025) ITEM NO : 5 Single Chest Press DIMENSIONS:- 9000mm (L) x 650mm (W) x 2150mm. (H). SAFEAREA :- 2.0 M X 1.7 M. Chestpress equipment madeup of“B”ClassG.I.pipe of different NB.NB stands for Nominal Bore Sizes i.e. Internal Diameter of pipe in millimeters. Make of G I Pipe will be of Tata, Jindal, Swastik, Zenith or Siddharth. The center pipe is of 100NBmadeup of“B”Class G.I. pipe. The bottom welded with supportof M.S.round plate of Ø250mm &10mm thickness.The connecting pipes are made up from 25NB “B”class G.I.pipe. The handle frame is made up from 25NB & 32NB “B”class G.I.pipe. To build structure bushes are used which are made from MS.seamless pipe of 60mm O.D. and 5mm thickness as well as 60mm diameter solid bar bush isused. The foundation used for fixing is a structure and made from center pipe of G.I. of 80 NB “B” class Welded with M.S. round plate of Ø250 mm&10mmthick. Main pipe supported with 25mm X 25mm M.S. angles of 2mm thickness and 20mm x 40mm MS square pipes of 2mm thickness. Foundation cover Closing Cap is madefrom HDPE / LLDPE Material.The seats and Back rests are fitted on the outer frames are made up of M.S. Sheet of size 330mmX 300mm X 2mm thickness and deep drawn and pressed in tools and dies to have uniform radius of 20 mm with no sharp edges.Closing Caps are made up of high quality HDPE / LLDPE material. Pins used of Diameter 25mm and 17mm are made up from bright material. The bearings used are of “6205zz” & “6203zz” permanent lubricated sealed bearing of reputed brand like SKF, FAG. High tensile steel with galvanized nuts & bolts are used for assembly. The cerclips used for locking is made up of A24mm & A16mm. The foundation pipes are embedded in C.C. stock of size 0.45 x 0.45 x 0.3m below ground level and painting is done by attractive color spraying after proper surface treatment, Shot blasting and initial coat of yellow primer surface is applied before top coat. The top coat is done using the best quality brand paint or duly powder coated of minimum 60 micron thickness. All open ends of pipe been closed by GI / HDPE caps for user safety against entrapment etc all. Rate inclusive of labour, material, , transport, etc complete all. Work done should be as per engineer incharge SSR Item No : 11 ) (PMC Garden ) Unique No (19632) Rate List Year (2024-2025) ITEM NO : 6 Single Seated Pullar DIMENSIONS:-1900mm (L) x 740mm (W) x 1920mm. (H). SAFEAREA:-1.2 M x 3 M Seated puller equipment made-up of “B” Class G.I. pipe of different NB. NB stands for Nominal Bore Sizes i.e. Internal Diameter of pipe in millimeters. Make of G I Pipe will be of Tata, Jindal, Swastik, Zenith or Siddharth. The center pipe is of 100 NB made from “B” Class G.I. pipe. Bottom support is of M.S. round plate of Ø250mm & 10mm thickness is welded. All linkages are made up of 25NB “B” class G.I. pipe. The handle frame is of 32NB “B” class G.I. pipe. The seat frame is of 32NB “B” class G.I. pipe, To build structure bushes are used which are made from seamless pipe of 60mm O.D. and 5mm thickness as well as 60mm diameter solidbar bush is used. The foundation used for fixingis a structure and made from center pipe of G.I. of 80 NB “B” class. Welded with M.S. round plate of Ø250 mm & 10mm thick. Main pipe supported with 25mm X 25mm M.S. angles of 2mm thickness and 20mm x 40mm MS square pipes of 2mm thickness. Foundation cover Closing Cap is made from HDPE / LLDPE material. Theseats and Back rests are fitted on the outer frames are made up of M.S. Sheet of size 330mmX 300mmX2mm thickness and deep drawn and pressed in tools and dies to have uniform radius of 20 mm with no sharp edges. Pins used of Diameter 25mm and 17mm are made up from bright material. The bearings used are of “6205zz” and “6203zz” permanent lubricated sealed bearing of reputed brand like SKF, FAG. High tensile steel with galvanized nuts & bolts are used for assembly. The cerclips used for assembly are of A16. The foundation pipes are embedded in C.C. stock of size 0.45 x 0.45 x 0.3 below ground level and painting is done by attractive color spraying after proper surface treatment, Shot blasting and initial coat of yellow primer surface is applied before top coat. The top coat is done using the best quality brand paint or duly powder coated of minimum 60 micron thickness. All open ends of pipe been closed by GI / HDPE caps for user safety against entrapment etc all. Rate inclusive of labour, material, , transport, etc complete all. Work done should be as per engineer incharge ( SSR Item No : 16 ) (PMC Garden ) Unique No (19637) Rate List Year (2024-2025) ITEM NO : 7 Thai - Chi Spineer (2 Wheel) DIMENSIONS:-1000mm (Length)x 500mm (Width) x 1450mm (Height). Safe Area :- 1.9 Mtr X 1.9Mtr Thai chi spinner Equipment made up of “B” Class G.I.pipe of different NB. NB stands for Nominal Bore Sizes i.e. Internal Diameter of pipe in millimeters. Make of G I Pipe will be of Tata, Jindal, Swastik, Zenith or Siddharth. The center pipe is of 100 NB made up of “B” Class G.I.pipe. The handle movement round frame is made up from 25 NB “B” class G.I. pipe. The foundation used for fixing is a structure and made from center pipe of G.I. of 100 mm NB “B” class Welded with M.S. round plate Ø250 mm & 10mm thick. Main pipe supported with 25mm X 25mm M.S.angles of 2mm thickness and 20mm x 40mm MS square pipes of 2mm thickness. Closing Caps are made up of high quality HDPE / LLDPEmaterial. The pins used are made up Ø25mm of bright material. •The bearing used is “6201zz” & 6205zz” permanent lubricated sealed bearing of reputed brand SKF, FAG. High tensile S.S. nut bolts are used for assembly. Foundation cover Closing Cap is made from HDPE / LLDPE. The cerclips used for assembly is of A24 and A11. The nylon bush is used for handle knob. Bolt M8 X 16 mm and Nylock nut of M8 made of SS are used on nylon cap mounted on pins to protect bearings and pins from rain and dust. The foundation pipes are embedded in C.C. stock of size 0.45 x 0.45 x 0.3m below ground level and painting is done by attractive color spraying after proper surface treatment, Shot blasting and initial coat of yellow primer surface is applied before top coat. The top coat is done using the best quality brand paint or duly powder coated of minimum 60 micron thickness. All open ends of pipe been closed by GI / HDPE caps for user safety against entrapment etc all. Rate inclusive of labour, material, , transport, etc complete all. Work done should be as per engineer incharge SSR Item No : 21 ) (PMC Garden ) Unique No (19642) Rate List Year (2024-2025) ITEM NO : 8 Sit Up Board Double PRODUCT DIMENSIONS: - 1950mm (L) x 1350mm (W) x 700mm (H). SAFE WORKOUT AREA: -2500mm L)x 1600mm (W). The Sit up Board double made from “B” Class GI pipe. Make of G I Pipe will be of Tata, Jindal, Swastik, Zenith or Siddharth. The Sit up Board double made from “B” Class GI pipe. Center column made from 100mm NB “B” class G.I. Pipe. The remaining frame of the sit up board is of 50mm NB made from “B” class GI pipe. The powder coating is done with Fiber reinforced Plastic sheet of 3mm thickness is Bounded on 25mm NB (G.I.) “B” class pipe of mainframe. The foundation used for fixing is a structure and made from center pipe of G.I. of 80 NB B” class Welded with M.S. round plate of Ø250 mm &10mm thick. Main pipe supported with 25mm X 25mm M.S. angles of 2mm thickness and 20mm x 40mm M.S. square pipes of 2mm thickness. The foundation pipes are embedded in C.C. stock of size 0.45 x 0.45 x 0.3m below ground level and painting is done by attractive color spraying after proper surface treatment, Shot blasting and initial coat of yellow primer surface is applied before top coat. The top coat is done using the best quality brand paint or duly powder coated of minimum 60 micron thickness. All open ends of pipe been closed by GI / HDPE caps for user safety against entrapment etc all. Rate inclusive of labour, material, , transport, etc complete all. Work done should be as per engineer incharge SSR Item No : 17 ) (PMC Garden ) Unique No (19638) Rate List Year (2024-2025) ITEM NO : 9 Triple Twister Providing and fixing Standing/Seated or Mix Triple Twister made from “B” Class Galvanized Iron (G.I.) Pipe. The Center Pipe is of 100mm NB made from “C” Class G.I. Round Pipe, and the bottom support of M.S. round plate of 250 mm dia & 10mm thickness is welded at bottom. The standing frame of the triple twister is of 40mm NB made from “C” class G.I. pipe. The handle frame (Round type) of triple twister is of 25 NB made from “C” class G.I. pipe. The seamless pipe is used for joining the centre pipe frame & handle frame is made from 130mm dia with 3mm thickness. For the assembly different bushes are used which are made from 60mm with 3mm thickness seamless pipe is used. The foundation used for fixing is consists of three equal items i.e. 100mm NB made from “C” class G.I. pipe, M.S. round plate of 250 mm diameter & 10mm thickness & 25 mm X 25mm X 3mm M.S. angle. The standing plate is fitted on the standing frame is made up of 300mm dia & 10mm thickness M.S. material. Closing caps made from top quality FRP material which is of 2 mm thickness. The rest pipes are used for standing the plates is of 100 NB made from “C” class G.I. pipe is used. The Pins used are made up of 25 mm dia bright bar. The bearings used are of “6205” permanent lubricated sealed bearing of reputed make like SKF, FAG. The bushes (Stopper) used to avoid the collusion made from Poly Urethin Plastic material of 50 mm dia. The nut bolts used for assembly are made from S.S. material. The foundation pipes are embedded in C.C. stock of size 0.45 x 0.45 x 0.3m below ground level and painting is done by attractive color spraying after proper surface treatment, Shot blasting and initial coat of yellow primer surface is applied before top coat. The top coat is done using the best quality brand paint or duly powder coated of minimum 60 micron thickness. All open ends of pipe been closed by GI / HDPE caps for user safety against entrapment etc all. Rate inclusive of labour, material, , transport, etc complete all. Work done should be as per engineer incharge ( SSR Item No : 6 ) (PMC Garden ) Unique No (19627) Rate List Year (2024-2025) ITEM NO : 10 Rower Providing and fixing rower made from “B” Class G.I. Pipe. The Main frame is of 80mm X 40mm & 40mm X 40mm CRC Pipe with 2 mm thickness. The handle frame is of 25 NB made from C” class G.I. pipe. The Foundation used for Fixing consists of three equal items i.e. 40mm NB made from “C” Class G.I. pipe, C channel of 75mm X 40mm X 5mm & 25mm X 25mm X 3mm M.S. angle. To join the movement frame to main frame seamless pipe of 50mm dia & 3mm thickness is used. The seats which are fitted on the main frame is made up of high quality FRP material of size 330mm X 330mm of thickness 3 mm & M.S. plate of size 250mm X 200mm X 5mm is used to support it. Closing caps are made from top quality FRP material which is of 2 mm thickness. The pins used are made up of 17mm diameter hardened bright bar. The bearings used are of “6203” permanent lubricated sealed bearing of reputed make foundation pipes are embedded in C.C. stock of size 0.45 x 0.45 x 0.3m below ground level and painting is done by attractive color spraying after proper surface treatment, Shot blasting and initial coat of yellow primer surface is applied before top coat. The top coat is done using the best quality brand paint or duly powder coated of minimum 60 micron thickness. All open ends of pipe been closed by GI / HDPE caps for user safety against entrapment etc all. Rate inclusive of labour, material, , transport, etc complete all. Work done should be as per engineer incharge. The handles used are of Rubber grip. The nut bolts used for assembly are made from S.S. material. The bushes (Stopper) used to avoid the collusion made from Poly Urethane Plastic material of 50 mm dia. The serclips used for assembly is of 17 mm dia. The foundation pipes are embedded in C.C. stock of size 0.45 x 0.45 x 0.3m below ground level and painting is done by attractive color spraying after proper surface treatment, Shot blasting and initial coat of yellow primer surface is applied before top coat. The top coat is done using the best quality brand paint or duly powder coated of minimum 60 micron thickness. All open ends of pipe been closed by GI / HDPE caps for user safety against entrapment etc all. Rate inclusive of labour, material, , transport, etc complete all. Work done should be as per engineer incharge SSR Item No : 9 ) (PMC Garden ) Unique No (19630) Rate List Year (2024-2025) ITEM NO : 11 Sky Walker DIMENSIONS :- 1650mm (L) x 700mm (W) x 1650mm.(H) SAFEAREA :- 2.7 m x 1.6 m. Sky Walker Equipment made from “B” class G.I. Pipe of different NB. NB stands for Nominal Bore Sizes i.e. Internal Diameter of pipe in millimeters. Make of G I Pipe will be of Tata, Jindal, Swastik, Zenith or Siddharth. The main frame pipe is of 80mm NB made from “B” Class G.I. Material which is bend at the radius of 250mm. The legmovement frame is of 50 x 50 mm x 3mm thick MS square pipe. Sleeves are made up of 100 mm OD M.S. pipe with thickness 5mm. This results in easy replacement of bearings, pins and handle. The handle frame is of 25mm NB made from “B” Class G.I. pipe. The foundation used for fixingis a structure and made from center pipe of G.I. of 80 NB “B” class. Welded with M.S. round plate of Ø250 mm &10mm thick. Main pipe supported with 25mm X 25mm M.S. angles of 2mm thickness and 20mm x 40mm MS square pipes of 2mm thickness. Two foundations are provided for rigid support. The foot rests made from HDPE LLDPE material of size 130 X 310 X 5mm. Closing Caps are made up of high quality HDPE / LLDPE material. The pins used are made up of Ø 25mm bright material. Pins are fixed at the outer end with M8 grub screws and Dia. 8mm SS ball. The bearings used are “6205zz” are permanent lubricated sealed bearing of reputed brand like SKF, FAG. High tensile steel with galvanizednuts & bolts are used for assembly. The cerclips used for assembly are of A24 type. TThe foundation pipes are embedded in C.C. stock of size 0.45 x 0.45 x 0.3m below ground level and painting is done by attractive color spraying after proper surface treatment, Shot blasting and initial coat of yellow primer surface is applied before top coat. The top coat is done using the best quality brand paint or duly powder coated of minimum 60 micron thickness. All open ends of pipe been closed by GI HDPE caps for user safety against entrapment etc all. Rate inclusive of labour, material, , transport, etc complete all. Work done should be as per engineer incharge SSR Item No : 18 ) (PMC Garden ) Unique No (19639) Rate List Year (2024-2025) ITEM NO : 12 SHOULDER BUILDER Providing and fixing Shoulder Builder made from “B” Class G.I. pipe. The Center Pipe is of 100mm NB made from “C” Class G.I. pipe, and the bottom support of M.S. Round plate of 250 mm diameter & 10mm thickness is welded at bottom. The handle movement frame is of 25 NB & 20 NB made from “C” Class G.I. pipe. To Join the centre pipe & handle movement frame seamless pipe of 130mm dia & 3mm thickness is used. The foundation used for fixing consists of three equal items i.e. 100mm NB made from “C” class G.I. Pipe, M.S. Round Plate of 250 mm dia & 10mm thickness & 25 mm X 25mm X 3mm M.S. angle. Closing caps made from top quality FRP material which is of 2 mm thickness. The pins used are made up of 25 mm dia bright bar. The bearing used are of “6201” & “6205” permanent lubricated sealed bearing of reputed make like SKF, FAG. The nut bolts used for assembly are made from S.S. material. The serclips used for assembly is of 25 mm diameter. The Poly Urethin plastic bush is used for handling. The foundation pipes are embedded in C.C. stock of size 0.45 x 0.45 x 0.3 m below ground level and painting is done by attractive color spraying after proper surface treatment, Shot blasting and initial coat of yellow primer surface is applied before top coat. The top coat is done using the best quality brand paint or duly powder coated of minimum 60 micron thickness. All open ends of pipe been closed by GI / HDPE caps for user safety against entrapment etc all. Rate inclusive of labour, material, , transport, etc complete all. Work done should be as per engineer incharge ( SSR Item No : 1 ) (PMC Garden ) Unique No (19622) Rate List Year (2024-2025) ITEM NO : 13 Back Extension Providing and fixing Back extension made from “B” class G.I. Pipe. The main frame of Ø90mm made from “C” Class G.I. pipe, and The leg movement frame is of Ø40mm made from “C” Class G.I. pipe. The handle frame is of Ø32mm made from “C” Class G.I. pipe. The seats is fitted on the frame is made up of high quality FRP material of size 330 mm X 300 mm of thickness 3 mm & M.S. Plate of thickness 5 mm and Size 250 mm X 200 mm is used to Support it. The foundation used for fixing is consists of 25 mm X 25mm M.S. angle of 3 mm thickness. The footrests is made from Aluminum casting material, its sizes are 130mm X 310mm X 5mm. For the support Ø32mm made from “C” Class G.I. pipe. The foundation pipes are embedded in C.C. stock of size 0.45 x 0.45 x 0.3m below ground level and painting is done by attractive color spraying after proper surface treatment, Shot blasting and initial coat of yellow primer surface is applied before top coat. The top coat is done using the best quality brand paint or duly powder coated of minimum 60 micron thickness. All open ends of pipe been closed by GI / HDPE caps for user safety against entrapment etc all. Rate inclusive of labour, material, , transport, etc complete all. Work done should be as per engineer incharge ( SSR Item No : 4 ) (PMC Garden ) Unique No (19625) Rate List Year (2024-2025) ITEM NO : 14 Sit Up Board Providing and fixing Sit up Board made from “B” Class G.I. pipe. The main frame is of 25mm NB made from “C” Class G.I. pipe. Perforated sheet of 2mm thickness is welded on main frame. The remaining frame of the sit up board is of 40mm & 50mm NB made from “C” class G.I. pipe. The foundation pipes are embedded in C.C. stock of size 0.45 x 0.45 x 0.3 m below ground level and painting is done by attractive color spraying after proper surface treatment, Shot blasting and initial coat of yellow primer surface is applied before top coat. The top coat is done using the best quality brand paint or duly powder coated of minimum 60 micron thickness. All open ends of pipe been closed by GI / HDPE caps for user safety against entrapment etc all. Rate inclusive of labour, material, , transport, etc complete all. Work done should be as per engineer incharge SSR Item No : 5 ) (PMC Garden ) Unique No (19626) Rate List Year (2024-2025) ITEM NO : 15 Horse Rider DIMENSIONS:-1180mm (Length) x 400mm (Width) x 1400mm. (Height). SAFEAREA:-2.2 Mtr x 1.4 Mtr. Horse rider equipment made from“B”class G.I. Pipe of different NB. NB stands for Nominal Bore Sizes i.e. Internal Diameter of pipe inmillimeters, Make of G I Pipe will be of Tata, Jindal, Swastik, Zenith or Siddharth. The main frame of 100NB made from “B” Class G.I. pipes welded with M.S. round plate of Ø250 mm &10mm thick, Seat provided are made up of MS deep draw quantity of 2mm thickness with no joint with uniform outer edge radius 20mm. The foundation used for fixingis a structure and made from center pipe of G.I. of 80 NB “B” class Welded with M.S. round plate of Ø250 mm &10mm thick. Main pipe supported with 25mm X 25mm M.S. angles of 2mm thickness and 20mm x 40mm MS square pipes of 2mm thickness. The leg movement frame is of 32NB made from “B” G.I.pipe. The handle frame is of 32 NB made from “B” Class G.I. pipe. The footrests are made from 25 NB “B” class G.I. pipe. Pins used of Diameter 17 mm are made up from bright material. The bearings used are “6203zz” permanent lubricated sealed bearing of reputed brand like SKF, FAG. High tensile steel with galvanized nuts &bolts are used for assembly. The circlips used for assembly are of A24mm. The foundation pipes are embedded in C.C. stock of size 0.45 x 0.45 x 0.3m below ground level and painting is done by attractive color spraying after proper surface treatment, Shot blasting and initial coat of yellow primer surface is applied before top coat. The top coat is done using the best quality brand paint or duly powder coated of minimum 60 micron thickness. All open ends of pipe been closed by GI / HDPE caps for user safety against entrapment etc all. Rate inclusive of labour, material, , transport, etc complete all. Work done should be as per engineer incharge SSR Item No : 13 ) (PMC Garden ) Unique No (19634) Rate List Year (2024-2025) ITEM NO : 16 60 mm Shot blasted blocks Providing & laying of 60mm thick non slippery concrete paving blocks as per the IS 15658-2006 with face of block. The block should have exposed aggregate, be shot blasted with colour UV stabilized and made from rich oxides and guarantee by manufacturer. Block to be manufactured in fully automatic ISO certified vibration compaction machine having strength of M-40 & cured in controlled temperature through mist and fixing on site with all grit material and labour included. SSR Item No : 1.03 ) (PMC ROAD ) Unique No (197) Rate List Year (2023-2024) ITEM NO : 17 Providing and applying two coats of flat oil paint of approved colour to the old structural steel work and iron work previously painted in building including scaffolding, if necessary, cleaning and preparing the surface (excluding primer coat) etc. complete. SSR Item No : 35.09 ) (PMC Bhavan ) Unique No (15560) Rate List Year (2024-2025)
