Tender For Renovation Quarters No. D-30 To D-50 And C-79 To C-82 In Thecbri Colony; 1 Providing Unskilled manpower for shifting of various old taking out fixtures from bath cum toilet site to specified placein the institute campus as per direction of Engineer-in-charge 2 Providing skilled manpower(Plumber) for taking outvarious old fixtures from bath cum toilet site to specified placein the institute campus as per direction of Engineer-in-charge 3 Dismantling tile work in floors / walls laid in cement mortar including stacking material within 50 metres lead : For thickness of tiles 10 mm to 25 mm 4 Providing Tractor trolly for shifting of malba, debrise, soil, various old testing models and materials from construction site to outside of institute and out site area of nagar nigum Roorkee including loading unloadingcomplete work in all respect as per direction of Engineer-in-charge. 5 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:2:4 (1 cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size) 6 Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels : Granite of any colour and shade : Area of slab over 0.50 sqm (Sample will be approved by Engineer in charge) 7 Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make(Orient / Kajaria / Somany or equal standard), in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. 8 Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make(Orient / Kajaria / Somany or equal standard), in colours White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement: 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete 9 Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge.With cement mortar 1:4 (1 cement : 4 fine sand) 10 Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan of make Hindware / Parryware / Essco by Jaquar or equal standard) with seat and lid, 10 litre low level white P.V.C. flushing cistern( of make Hindware / Parryware / Essco by Jaquar or equal standard), including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required :W.C. pan with ISI marked white solid plastic seat and lid 11 Providing and fixing wash basin( of make Hindware / Parryware / Essco by Jaquar or equal standard) with C.I. brackets, 15 mm C.P. brass pillar taps(Hindware / Kartar / Essco by Jaquar or equal standard), 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require : White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar tap 12 Providing and fixing white vitreous china pedestal (of make Hindware / Parryware / Essco by Jaquar or equal standard) for wash basin completely recessed at the back for the reception of pipes and fittings. 13 Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour : 450 mm long towel rail with total length of 495 mm, 78 mm wide and effective height of 88 mm, weighing not less than 170 gms 14 Providing and fixing G.I. pipes(of make Jindal / Hissar / Tata or equal standard) complete with G.I. fittings(GI elbow / Tee / Socket / Reducer of make New / HBI or equal standard) and clamps, including excavating / cutting and making good the walls: 15 mm dia nominal bore 15 Providing and fixing on wall face unplasticised Rigid PVC rain water pipes(of make Monica Gold / Prince / Astral or equal standard) conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes: 110 mm diameter - 6kg/sqcm 16 Providing and fixing on wall face unplasticised Rigid PVCpipes(of make Monica Gold / Prince / Astral or equal standard) conforming to IS : 13592 Type A, including cutting the floor and jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes: 75 mm diameter metre - 6kg/sqcm 17 Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete : 75 mm 18 Providing and fixing C.P. brass angle valve(of make Hindware / Kartar / Essco by Jaquar or equal standard) for basin mixer and geyser points of approved quality conforming to IS:8931 :15mm nominal bore 19 Providing and fixing G.I. Union( of make HBI / New or equal standard) in existing G.I. pipe line, cutting and threading the pipe and making long screws, including excavation, refilling the earth or cutting of wall and making good the same complete wherever required :15 mm nominal bore 20 Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. 21 Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required :Kitchen sink without drain board:610x510 mm bowl depth 200 mm 22 Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.Semi rigid pipe :32 mm dia 23 Providing and fixing C.P. brass long body bib cock of approved quality (of make Hindware / Kartar / Essco by Jaquar or equal standard) conformingto IS standards and weighing not less than 690 gms.15 mm nominal bore 24 Providing and fixing C.P. brass bib cock of approved quality(of make Hindware / Kartar / Essco by Jaquar or equal standard)conforming to IS:8931 :15 mm nominal bore 25 Distempering with 1st quality acrylic distemper (ready mixed) having VOC (Volatile Organic Compound ) content less than 50 gram/ litre, of approved brand(Asian / Berger / Nerolac or equal standard) and manufacturer including applying additional coats wherever required to achieve even shade and colour :on old work (Two or more coats) 26 Finishing walls with Premium Acrylic Smooth exterior paint(of make Asian / Berger / Nerolac or equal standard) with Silicone additives of required shade : Old work (Two or more coats applied @ 0.83 ltr/10 sqm). 27 Providing and applying white cement based putty of average thickness 1 mm, of approved brand(Birla / JK or equal standard) and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete 28 Applying one coat of water thinnable cement primer of approved brand(of make Asian / Berger / Nerolac or equal standard) and manufacture on wall surface : Water thinnable cement primer 29 Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete 30 Painting with synthetic enamel paint of approved brand(of make Asian / Berger / Nerolac or equal standard) and manufacture to give an even shade :Two or more coats on new work 31 Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid board(make of Green Ply / Archid / Century or equal standard) one side white color and other side of board laminted with PVC foil of minimum 14 micron thickness of approved design pasted with hot melt adhesive for cup boards, work stations and bathroom/kitchen cabinet etc. of required sizes comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/ borer proof, water/moisture proof and fire retardant and fixing with stainless steel piano hinges/soft close clip on concealed hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In- Charge :18 mm thick Cup boards shutter 32 Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/Ceosetory windows & other Frames/Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded Code Description Unit Rate No. 542 SUB HEAD : 26.0 NEW TECHNOLOGIES AND MATERIALS star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-In- Charge : Frame(make of Green Ply / Archid / Century or equal standard) size 45 x 70 mm 33 Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter(make of Green Ply / Archid / Century or equal standard) of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/ borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In- Charge : 30 mm thick 34 Providing, mixing and applying bonding coat of approved adhesive on chipped portion of RCC as per specifications and direction of Engineer-In-charge complete in all respect. SBR Polymer (@10% of cement weight) modified cementitious bond coat @ 2.2 kg cement per sqm of surface area mixed with specified proportion of approved polymer(Asian / Sika / STP / Dr. Fixit or equal standard) 35 Grading roof for water proofing treatment with Cement mortar 1:4 (1cement : 4 coarse sand) with water proofing compound. 36 Providing and laying APP (Atactic Polypropylene Polymer) modified prefabricated five layer 3 mm thick water proofing membrane(Asian / Sika / STP / Dr. Fixit or equal standard), black finished reinforced with non-woven polyester matt consisting of a coat of bitumen primer for bitumen membrane @ 0.40 litre/sqm by the same membrane manufacture of density at 25°C, 0.87-0.89 kg/ litre and viscocity 70-160 cps. Over the primer coat the layer of membrane shall be laid using Butane Torch and sealing all joints etc, and preparing the surface complete. The vital physical and chemical parameters of the membrane shall be as under : Joint strength in longitudinal and transverse direction at 23°C as 650/ 450N/ 5cm. Tear strength in longitudinal and transverse direction as 300/250N. Softening point of membrane not less than 150°C. Cold flexibility shall be upto -2°C when tested in accordance with ASTM, D - 5147. The laying of membrane shall be got done through the authorised applicator of the manufacturer of membrane :3 mm thick 37 Applying two coat of bituminous aluminium paint (super silver shield of Asian / Sika / STP / Dr. Fixit or equivalent) on the existing APP sheet roof treatment by using appropriate brush manually including cleaning/ dusting of existing APP sheet surface etc. complete in two successive coats applied @ 0.25 litre per sqm. 38 Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete :250x10 mm 39 Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : 125 mm 40 Providing and laying Vitrified tiles in different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS: 15622, of approved brand(Orient / Kajaria / Somany or equal standard) double charged & manufacturer, in all colours and shade, in skirting, riser of steps, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6 mm thickness, including grouting of joints: Size of Tile 600x600 mm 41 Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length :Sal wood 42 Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows, fixing with SS butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge : 35 mm thick shutters of Kiln seasoned selected planks of sheesham wood 43 Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick :Kiln seasoned selected planks of sheesham wood 44 Providing and fixing glazed shutters for doors, windows and clerestory windows using 4 mm thick float glass panes, including ISI marked SSbutt hinges bright finished of required size with necessary screws : Kiln seasoned selected planks of sheesham wood : 30 mm thick 45 Providing and fixing wire gauge shutters using galvanized M.S. wire gauge of average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm, for doors, windows and clerestory windows with hinges and necessary screws : 30 mm thick shutters : with ISI marked SS butt hinges bright finished of required size : Kiln seasoned selected class of sheesham wood 46 Tucking on the existing marble chipps flooring with manual Chisel or by standard power driven percussion type machine including cleaning the exposed existing floorsurface with wire brushes etc. and disposal of debris for all lead and lifts all complete as per direction of Engineer-In-Charge. 47 Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete :150x10 mm 48 Providing and fixing ISI marked oxidised SS sliding door bolts with nuts and screws etc. complete : 250x16 mm 49 Removing existing APP by manually means including disposal with in 50m leadas per direction of Engineer In-charge at site. 50 Removal of uneven loose/projected surface on the substrate (lime/cement concrete) of any grade and disposal of debris / waste to the colony desingnated place as per direction of engineer inchagre 51 Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). 52 Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level : Cold twisted bars 53 Centering and shuttering including strutting, propping etc. and removal of form for : Shelves (Cast in situ) 54 Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels : Raj Nagar Plain white marble/ Udaipur green marble/ Zebra black marble 55 Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 25 mm nominal bore ISI mark 56 Detachment of 500 litre capacity PVC over head tank on the roof with water supply pipe line & fitting and refixing the same place after completion of water proofing treatment(Labour only). 57 Providing and fixing brass stop cock(250 gm weight) of approved quality :15 mm nominal bore 58 Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2coarse sand : 4 stone aggregate 10 mm and down gauge), including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design :In 75x75 mm deep chase 59 Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement, chucknut nipple and making necessary holes for inlet, outlet and overflow pipes but without the base support for tank. 60 Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge : Nominal concrete 1:3:6 or richer mix. 61 Applying priming coat:With ready mixed pink or Grey primer of approved brand (Asian / Berger / Nerolac or equal standard) and manufacture on wood work (hard and soft wood) 62 Providing and fixing C.P. brass shower rose(Kartar / Essco by Jaquar or equivalent) with 15mm : 100 mm diameter 63 Providing and fixing uplasticised PVC connection pipe with brass unions :45 cm length, 15 mm nominal bore 64 Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in Superstructure up to floor V level in cement mortar 1:4 (1 cement : 4 coarse sand) 65 Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in :Cement mortar 1:6 (1 cement : 6 coarse sand) 66 Taking down carefully old electric point wiring, sub main , switch board, Power point all electric fitting & fixture etc from Type II & Type III Quarter and shifting of old materials with CBRI (Central Store )as required and directed by engineer-incharge. 67 Wiring for light Point /fan point /exhaust fan /call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface/recessed steel conduit with modular switch of ISI marked, modular plate suitable G.I Box and earthing the point with 1.5 sq mm FRLS PVC insulated copper conductor single core cable including ceiling rose , blanker etc as required. Group A 68 Wiring for circuit /sub-main wiring along with earthwire with the following size of FRLS PVC Insulated copper conductor single core cable of ISI Marked in surface/ recessed steel conduit as required 69 2 x 2.5 sq mm + 1 x 2.5 sq mm earth wire 70 2 x 4 sq mm + 1 x 4 sq mm earth wire 71 2 x 6 sq mm + 1 x6sq mm earth wire 72 Supplying & Fixing of modular blanking plate on the existing modular plate & switch box excluding modular plate. As required. 73 Supplying& Fixing Suitable size GI boxwith modular plate and cover in front on surface or in recess , including providing & Fixing 3pin 5/6 Amodular socketoutlet and 5/6 AmModular switch of ISI marked , connections etc as required. 74 Supplying& Fixing Suitable size GI boxwith modular plate and cover in front on surface or in recess , including providing & Fixing 6pin 5/6and 15/16 A modular socketoutlet and 15/16A modular switch of ISI marked , connections etc as required. 75 Supplying and fixing 5A to 32A rating, 240V/415V , 10kA,C curve , miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. 76 16A SP MCB, 32A SP MCB Make 77 Supplying and fixing of the ellipse neo 13.5 W hexa LED Bulkhead as required and directed by engineer-incharge.. 78 Supplying and fixing of LED Blub 9Was required and directed by engineer-incharge. 79 Supplying and fixing of LED light batten20W ,6500K lumen 3600 lm as required and directed by engineer-incharge. 80 Supplying & Fixing PVC batten / angle holder including connection etc. as required. 81 Supplying and fixing call bell suitable for single phase, 230V, complete as required. 82 Wiring for twin control light point with 1.5sq.mmFRLS PVC insulated copper conductor single core cable in surface / recessed steel conduit, 2way modular switc, modular plate , suitable GI Box abd earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. 83 Supply, Installation, Testing and commissioning of 1200mm sweep, BEE 5star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation : B,3 nos. blades, 30cm long down rod, 2 nos. canopies, shackle kit, safety rope, coppper winding, power factor not less than 0.9, Service Value (CM/M/W) minimum 6.00, Air delivery minimum 210 Cum/Min , 350 RPM ( tolerance as per IS : 374-2019), THD less than 10% remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise= 75 degree C( max ). insulation resistance more than 2 mega ohm, suitable for230V, 50Hz single phase AC Supply, earthing etc. complete as required. 84 S/F following rating, double pole, 240V isolator in the existing MCB DB complete with connections testing and commissioning etc. as required. 85 63A 86 Supplying and fixing 2 + 6 way, single pole and neutral, sheet steel, MCB distribution board, on surface/ recess, complete with tinned copper bus bar,Neutral bus bar, Earth bar, din bar, interconnections, powder painted including earthing etc. as required (But without MCB/ RCCB/ Isolator) 87 S/F following rating, four pole, 415V isolator in the existing MCB DB complete with connections testing and commissioning etc. as required.
