Tender For Provision Of Guard Room Along With Toilet At Dca Colony And Offers Mess Of 116 Engr Regt And Provn Of Hard Standing Near Security Post Barries No 1 Under Ge (West) Bareilly; 1 Surface excavation in soft/loose soil n exc 30 cm deep and averaging 15 cm deep and getting out complete all as specified and directed. 2 Excavation in trenches n.exc 1.5 m wide & n.exc 1.5 m in depth for foundation etc or for shafts, wells, cesspits, manholes, pier holes, etc n.exc 10 Sqm on plan and n.exc 1.5 m in depth and getting out in soft/loosesoil complete all as specified and directed. 3 Excavation in trenches exc 1.5 m & n.exc 3 m in depth for foundation etc or for shafts, wells, cesspits, manholes, pier holes, etc n.exc 10 Sqm on plan and n.exc 3 m in depth and getting out in soft/loosesoil complete all as specified and directed. 4 M&L for cement concrete type D2 1:4:8 (using 40 mm graded stone aggregate) etc in foundations, filling and mass concrete complete all as specified and directed. 5 M&L for reinforced cement concrete (nominal mix) Type B1 1:2:4 (20 mm graded aggregate) foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed. 6 M&L flat form work to sides of concrete foundations, footing bases of columns, raft and raft beams, sides and soffits(if any) of foundation and plinth beams and similar work, veritical or to batter for rough finish surface of concrete complete all as specified and directed. 7 M&L for reinforced cement concrete (nominal mix) Type B1 1:2:4 (20 mm graded aggregate)as incolumns, pillars, pierrs, posts & struts etc complete all as specified and directed. 8 M&L for form work to sides of pillars posts, struts piers, columns & stanchions square rectangular or polygonal rough finished surfaces in shape all complete all as specified and directed. 9 M&L for reinforced cement concrete (nominal mix) Type B1 1:2:4 (20 mm graded aggregate)as in beams cantilevers bressumers, lintels over 1.5m span etc complete all as specified and directed. 10 M&L flat form work to sides and soffits of floors or roof beams haunching, girders bressumers lintel cantilevers shelves including supports, overhangs etc also splays between floors and beams etc complete all as specified and directed. 11 M&L for reinforced cement concrete (nominal mix) Type B1 1:2:4 (20 mm graded aggregate) as in slab supported on walls, beams and columns in floors, roofs, landings balconies canopies, deck slab and in shelves and the like etc etc complete all as specified and directed. 12 M&L for form work to soffits of suspended slab such as roof slabs, floors slabs, landing & similar work not exceeding 200 mm thick (Horizontal or sloping) etc flat rough finished surfacescomplete all as specified and directed. 13 M&L for reinforced cement concrete (nominal mix) Type B1 1:2:4 (20 mm graded aggregate) as in chajjas complete all as specified and directed. 14 M&L for formwork to rough finished surfaces of contrete ofchullah hoods, chajjas, troughs and similar items including edges complete all as specified and directed. 15 M&L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for colomns hocking ends and binding with and including mild steel wire (annealed not less than 0.9 mm dia or securing with clips quality conforming to complete all as specified and directed. 16 M&L for mild steel TMT bars 8mmto 10mm dia as in stirrups, spaces and binder, bent to shape required including cranking, bending spirally for hooping for colomns hocking ends and binding with and including mild steel wire (annealed not less than 0.9 mm dia or securing with clips quality conforming to complete all as specified and directed. 17 M&L for brick work with fly ash old size bricks, straight or curved on plan exc 6m mean radius, built in CM 1:6 complete all as specified and directed. 18 M&L for 20 mm thick damp proof course in cement motar 1:2 to horizontal or vertical surfaces including necessary formwork complete all as specified and directed. 19 M&L for applying evenly a coat of blown type bitumen at the rate of 1.50 kg per square metre and blinding with clean dry sand @ 0.05 cum per sqm complete all as specified and directed. 20 Supply only liquid Water proofing compound complete all as specified and directed. 21 M&L for rendering 12 mm thick in CM 1:6 on fair faces of brick work or concrete surfaces of wall of any description, and finishing the surfaces even and smooth without using extra cement complete all as specified and directed. 22 M&L for rendering 15 mm thick in CM 1:4 using WPC on fair faces of brick work or concrete surfaces of wall of any description, and finishing the surfaces even and smooth without using extra cement complete all as specified and directed.Note:- WPC shall be measured and paid and separately. 23 M&L for rendering 5mm thick on ceiling or concrete surfaces in cement mortar 1:3 newly surface even and smooth without using extra cement and necessary scaffolding complete all as specified and directed. 24 M&L for 15 mm thick rendering in cement mortar 1:3 on roof top using water proofing compound on RCC roof surfaces complete all as specified and directed. 25 M&L for applying two coat of distemper oil emulsion(with airless electric spayer) white or tinted over 1 mm thick wall care putty on newly decorated or undecorated wall surface including preparation ofsurfaces by washing rubbing down and stoping of distempered and painted surfaces complete all as specified. 26 M&L for applying two coat of distemper oil emulsion(with airless electric spayer) white or tinted on 1 mm thick wall care puttynewly decorated or undecorated ceiling, soffits of slab surfaces including preparation ofsurfaces by washing rubbing down and stoping of distempered and painted surfaces complete all as specified and directed. 27 M&L for two coats ofweather proof paint over two coats of exterior primer on 1 mm thick putty complete all as specified and directed. 28 M&L for ceramic tiles light shade 8 to 10 mm thick (square/rectangular) polished, area of each tiles exc 0.18 sqm andnot exceeding 0.38 sqm in floor etc, set and jointed in neat cement slurry and pointed in white or coloured cement including 15mm thick screed bed in cement motar 1:6 complete all as specified and directed. 29 M&L for ceramic tiles light shade 8 to 10 mm thick (square/rectangular) polished, area of each tiles exec 0.16 sqm andnot exceeding 0.36 sqm as in vertical surfaces and screed bed / rendering and provn of rendering 10 mm thickin cement mortar 1:4, as in backing layer complete all as specified and directed. 30 M&L for Glazed (plain /coloured) ceramic tiles wall 300x600x7mm thick on vertical faces of walls including 10mm thick renderingin CM 1:4 set jointed in neat cement slurry and pointed in coloured cement to match complete all as specified and directed. 31 M&L for non- skid ceremic colouredtiles7 to 8 mm thick(Square / rectangular) areaof each tile exceeding0.11 Sqm but not exceeding 0.18 Sqm in floors etc set and jointedin neat cementslurry and pointed in whiteor colouredcement to match and screed bed or bedding layer of mortar 15mm thick in cement mortar 1:6 for laying floor finishes complete all as specified and directed. 32 S&F 18-20 mm thick Granite (of any type) tiles machine cut, bedded and jointed with grey cement slurryand pointed with white cementwith admixture of pigment to match the shade of granite stone including grinding and polishing complete as in riser & steps, cills, wHB platforms and like jointed in cement mortar 1:4including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed . 33 M&L for broken stone or boulders or hard core gauge n.exc 63mm , deposited spread and levelled in layers n exc 15cm thickness and rammed to a true surfaces complete all as specified and directed. 34 M&L for sand filling under Interlocking paver block including watering, consolidation and compaction with plate vibrator complete all as specified and directed. 35 M&L for 100 mm thick PCC 1:4:8 type D 2 (using 40 mm graded stone aggregate) as in sub base under floors complete all as specified and directed. 36 M&L for 50 mm thick PCC 1:2:4type B1 (using 20 mm graded aggregate) as in flooring & finifshed with matalic hardner complete all as specified and as directed. 37 M&L for 75 mm thick PCC 1:3:6 type C 2 (using 40 mm garded aggregate) as in plinth protection complete all as specified and directed. 38 M&L for treating the backfill in contact with foundation at the rate of 7.5 litres of emulsion per square metre of vertical surface (Area of the sub structure in contact with backfill to be measured) complete all as specified and directed. 39 M&L for Treating the top surface of filled earth at the rate of 5 litres of emulsion per square metre of surface complete all as specified and directed. 40 M&L for Treating the soil under plinth protection at the rate of 5 litres of emulsion per square metre of surface area complete all as specified and directed. 41 M&L for treating the soil along with external perimeter of building at the rate of 2.25 litre of emulsion per metre of the perimeter wall complete all as specified and directed. 42 M&L for Treating the bottom and sides of excavation at the rate of 5 litres of emulsion per square metre of surface area complete all as specified and directed. 43 S&F for 30 mm thickflush shutter, solid core construction with block board core and ply wood face panels, commercial type on both side complete all as specified and directed. 44 S&F 105x60mmx2mm thick pressed steel, frames for door with one or more rebates including filing andinner surface of the frame shall be treated with a coat of bituminous paint & compaction with PCC 1:3:6 Type C1 necessary fixing lugs, SS hinges,lock strike plate, 02 x MS bar/flat at bottom of the frameetc, including wooden texture finished paint on the frame surface complete all as specified and directed. 45 S&F solid PVC door frame of size 50mm X 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, S & F in opening as per manufacturers instructions complete all as specified and directed. 46 S&F factory made solid panel PVC door shutter 30 mm thick (style)consisting of frame made out of MS tubes for top and bottom rail. MS frame shall be covered with heat moulded plain colour PVC C channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail ; panelling of plain colour PVC sheet to be fitted in the M.S frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, suppling & fixing in the frame as per manufacturers instructions complete all as specified and directed. 47 S&F powder coated aluminium sliding windows frame with movable shutter (sliding on minimum two PVC roller of best quality) for each shutter on three trackswith stainless steel mosquito proofing and glazing shutter and including 5.50 mm thick figured glass & stainless steel wire mesh fixed with neoprene rubber gasket with aluminium beading, clipsa, frame made with aluminium section as appended below-(i) Window frame :92 x38 mm X 1.15 mm thick for three tracks. 68.4x38mm X 1.15 mm thick fortwo tracks.(ii) Top/bottom rail and style / rail of shutter : 15x37.5x1.15 mm thick and over. (iii) Aluminium beading - 0.7mm thick(iv) stainless steel wire cloth 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed in aluminium window or along with F/Y section fixed with aluminium wire staples complete. (v) Aluminium fittings such as aluminium suitable handle with auto interlock cap with suitable size .(vi) Making good of wall surfaces with silicon to match with existing surfaces complete all as specified and directed. 48 S&F for 100mm long stainless steel butt hinges complete all as specified and directed. 49 S&F for 200 mm long aluminum anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed. 50 S&F for 200mm long Extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed. 51 S&F 300 mm long Aluminium alloy, anodised,sliding door bolt with hasp,staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed mild steel complete all as specified and directed. 52 S&F mild steel framed work such as grills grating etc with ends of bars shouldered and/or riveted or forged into spikes framed guard bars, barrel iron doors ladders framed balusters walk ways railing frame work of water tanks, hole fast and similar work confirming to Fe -290 Gde-E-165 complete all as specified and directed. 53 M&L for cement concrete Type B-1 1:2:4 (20mm graded agg) as in coping, window cills, water troughs and the like including weathering slightly rounded or chamfered angles and throating complete all as specified and directed. 54 S&F vitreous china squatting pan of orrissa pattern long pan size580 x 440 mm white with Por S trap size100 mm dia front or back inlet and integral foot rest any pattern (excluding flushing cistern and flush pipe) including provn of lime concrete bedding (1:2:5), minimum 150mm all round and finish just below level of rim of pan complete all as specified and directed. 55 S&FPVC low level flushing cistern 10 litres, valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets, flushing pipe complete all as specified and directed. 56 S&F fancy type chromium plated brass angle valve type suitable for 15mm bore pipe complete all as specified and directed. 57 S&F 15 mm dia bib tap fancy type chromium plated with flange quarter turn incl all necessary fittings complete all as specified and directed. 58 S&F 450mm long PVC connection 15mm bore with PTMT nuts complete all as specified and directed. 59 S&F 20 mm bore CPVC water tubing with all fittings medium grade and fixed complete to wall and ceiling or laid in floors incl taking down of existing pipe line of any description complete all as specified and directed. 60 S&F 25 mm bore CPVC water tubing with all fittings medium grade and fixed complete to wall and ceiling or laid in floorsincl taking down of existing pipe line of any description complete all as specified and directed. 61 S&F 100mmx100mm stainless steel grating fixed complete all as specified and directed. 62 S&F fancy type stainless steel towel rail size 600mm long including a pair of brass bracket complete all as specified and directed. 63 S&F vitreous chinaware coloured wash hand basin with padestal of size 55X40X82cm complete including CP Waste coupling ,waste pipe ,complete fixing arrangementand cutting for and pinning in walls & making good complete all as specifed and directed. 64 S&F fancy type brass chromium plated soap dish of 160x160x90 mm complete all as specified and directed. 65 S&F designed looking mirror area exc 0.54 sqm to 0.75 sqm of selected quality 6mm thick glass, mounted on fixed to wall with CPplugs with chromium plated brass screws and cup washers, complete all as specified and directed. 66 S&F of PVC corner set of three of size (12X12 ,9X9 and6 X6 ) with railling and complete all as specified and directed. 67 S&F fancy type 15 mm bore brass chromium plated pillar tap for WHB screwed down for iron pipe and fixed to WHB complete all as specified and directed. 68 S&F low density polyethene pipes (LDPE) 32mm of pressure rating 6 Kg/cm2 fixed to walls complete all as specified and directed. 69 S&F stainles steel Curtain Rod 25 mm dia of approved quality with two number decorative design as approved brackets fixed in brick/concrete wall and same finished knobs on each end of curtain rod complete all as specified and directed. 70 S&F 1000 ltrs capacity rotational moulded polythylene triple layered water storage tanks white in colour (cylindrical vertical with closed top) hoisted and fixed in position and any description all as specified in SSR Part I complete all as specified and directed. 71 S&F 15mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball screwed for iron pipe and fixed (Minimum weight 210 gms complete all as specified and directed. 72 S&F 20mm dia Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed 73 S&F Mild steel OHT cage, bands, straps, supports or stay, for rain water, ventilating pipes including bolts if reqd, hooks (stay) heavy for large gates hook and pintle large hasps and staple, chains hand made sliding bolts clamps, hold fasts wall ties etc etc hooks for hanging fans plain angle cleats for securing purlins to wood truss or rafter, knee piece inserts, two way and three way straps, plate washer and similar small articles confirming to Fe-290 Gde - E-165 all as spd and directed. 74 S&F PVC (SWR) 110 mm diasoil waste or rainwater drainage pipes single socketed in any length with rubber ring joint laid in floor or fixed on wall all as specified or as directed. 75 S&FPVC (SWR) 110 mmbore bends all as specified or as directed. 76 S&F PVC (SWR) multi floor trap with grating including jointing with solvent cement floor trap 75 mm dia outlet plain including jointing to waste pipe fixed in cement concrete (1:2:4), type B-1 complete all as specified and as directed. 77 S&F spun iron soil, waste and vent pipe, 75mm bore, in any length with or without ear with cement joint fixed to walls complete all as specified 78 S&F 100mm bore PVC bends (any radius) diminishing pieces or tapers (larger bore mesured) with oval access door 79 S&F 75 mm bore PVC bends (any radius) diminishing pieces or tapers (larger bore mesured) with oval access door 80 S&F 75 mm bore PVC cowl complete all as specified. 81 S&F stainlesssteel glossy finish hat peg set of five tier with necessary fitting complete all as specified and directed. 82 S&F for computerised reflective letter / bldg number on ACP sheet (size 45mm x 45mm) and fixing with 04 nos of screw, rawal plug etc on wall in front of building complete all as specified and directed. 83 Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm thick in soil complete all as specified and directed. 84 Removing excavated material exc. 250 m but n exc. 500 m and depositing where directed n. exc 1.50 M above the starting point in soil complete all as specified and directed. 85 M&L for providing interlocking tiles path over 25 mm sand layer over 75 mm thcik PCC , type C2 (using 40 mm graded stone aggregate) as in floors complete all as specified and directed. 86 M&L for PCC kerb stone outer coloured surface machine pressed factory made of size 350 mm long , 300mm wide, 150mm thick and 350 mm in deepusing as in PCC (1:2:4) type B1 (using 20 mm graded stone agg) including form work weathering, slightly rounded or chamfered angles and throating all as specifed and directed 87 M&L for plain cement concrete 1:3:6 type C2 (Nominal Mix) using 40 mm graded stone aggregate in foundation filling and mass concrete complete all as specified and directed 88 M&L for plain cement concrete 1:2:4 type B1 (Nominal Mix) using 20 mm gaded stone aggregate as in surface channel & drain complete all as specified and directed 89 M&L for brick work with sub class b bricks class designation 75, old size, straight or curved on plan exceeding 6 m mean radius built in Cement Mortar 1:4 complete all as specified and directed. 90 M&L for rendering 15 mm in Cement Mortar 1:4 on fair faces of brick work or concrete surfaces finished even and smooth using extra cement complete all as specified and directed. 91 Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc complete all as specified and directed. 92 Add or deduct for each 25 mm girth or part thereof over or under 30 cm inner girth in cement concrete complete all as specified and directed. 93 Removing excavated material (soil) not exceeding 50 m and depositing where directed at a level n. exc 1.50 m above the starting point completeall as specified and as directed. 94 Surface dressing n.exc. 15 cm deep in soft/ loose soil including clearing away all grass vegetation, saplings, shrubs, brushwood, undergrowth roots, and trees complete all as specified and directed. 95 M&L precast cement concrete block masonry with solid blocks of plain cement concrete 1:2:4 type B1 (using 20mm graded crushed stone aggregate) exc 10 cm in width and setting in mortar 1:6 complete all as specified and directed. 96 M&L for Hardcore of broken stone or boulders of gauge n.exc 63mm deposited spread and levelled in layers n.exc 15cm thick watered and rammed to a true surface complete all as specified and directed. 97 M&L for PCC, 1:1.5:3 (using 20 mm graded stone aggregates) in foundations, flling, base of hard standing and mass concrete etc. complete all as specified and directed. 98 M&L for forming Contraction (Dummy) joints 30mm deep x 10mm wide, filled with sealing compound Gared B complete all as specified and directed. 99 M&L for forming 12mm thick expansion joints filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound, Grade B, thickness of concrete slab 200mm complete all as specified and directed. 100 M&L for point wiring with single core FRLS 1100 volt grade cable with multi stranded copper conductor of size 1.5 Sq mm (Nominal area) drawn through and including non metallic rigid PVC conduit medium duty ISI markednot less than 20mm dia, with all conduit accessories, screws (concealed conduit wiring in walls and casing capping on ceiling or roof) including metal box suitable for modular fittings and covered withmodular plateand cover of suitable size with new brass screwsfor mounting switch sockets and regulators and drawing continuous earth wire with and including PVC sheathed 1100 Volts grade cable with strandedcopper conductor of size 1.5 Sq mm (Nominal area) and connected to main earth dolly complete all as specified for the following:-(a) One light / fan/ exhaust fan point controlled by one switch. 101 All as per item No. 100 here in before but for one 5 pin 5 Amp switch socket out let point on an independent board. 102 All as per item No. 100 here in before but for one 3 pin socket outlet 5 Amps on the same board 103 All as per item No. 100 here in before but for one 15 Amp 6 Pin switch socket out let independent with2.5 Sqmm FRLS (Nominal Area) PVC unsheathed copper conductor single core multistrandedincl 2.5 sq mm FRLS PVC copper conductor single core used as earth continuity conductoe complete all as specified.complete all as specified. 104 S&F modular switch one way 6 A, 1 Module complete all as specified and directed 105 S&F modular switch one way 16 A, 1 Module complete all as specified and directed 106 S&F modular Socket 6 Amp, 2/3 Pin combined 2 Module complete all as specified and directed. 107 S&F modular Socket 6/16 Amp, 2/3 Pin combined 2 Module complete all as specified and directed 108 S&F modular fan regulator Step up type, 120 Watt, 2 Module complete all as specified and directed. 109 S&F ceiling rose PVC/ Poly carbonate,Isolated body, threeterminal AC 230 volts complete all as specified and directed. 110 M&L for lamp holder, PVC / Poly carbonate, insulated bodymodular type with back plate batten/angle type for batten fittings complete all as specified and directed. 111 S&F LED mirror light fitting of 1 x 10 wattLED batten with aluminium housing with all accessories prewired suitable for wall /surface mounting complete with connection complete all as specified and directed. 112 S&F LED mirror light fitting of 1 x 20 wattLED batten with aluminium housing with all accessories prewired suitable for wall /surface mounting complete with connection complete all as specified and directed. 113 S&F LED lamp 12 Watt, 230 V, AC integrated circuit complete all as specified and directed. 114 S&F LED Bldg Street light fitting 35 - 36W, IP 65 made up of pressure die cast housing with toughned glass and individual high power LEDs with secondary optics, IP65 protection, roadway luminaire with high powerLED as light source 1 x 35/36 Watt, LED 6000K, complete with all accessories internally pre-wired complete all as specified and as directed. 115 S&Fceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and directed. 116 S&F exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300mm complete all as specified and directed. 117 S&F MCB SPN 40 Amp 240 volt complete all as specified and directed. 118 S&F MCB single pole 6 to 32 Amp 240 Volt B curve 10 KA complete all as specified and directed. 119 S&F flush sheet metal enclosure SPN DB 8 way with double door IP-42 protection detachable gland plates, flush mounting for MCB fitted with bus bar, earth bar and neutral links complete complete all as specified and directed. 120 M&L for earthing complete with galvanised steel earth plate 600x600x 6mm thick, buried directly in ground (earth pit not less than 2.25 mtr deep below ground level ) with top edge of the plate not less than 1.5 meters below normal ground level, surrounded with adequate quantity of charcoal dust mixed with salt to a packed thickness of 15 cm all around the plate using 4 mm dia GI wire as earth wire electrode moulded and rivetted to earth plate at one end and connected to main switch/ control switches of buildings at another end, GI earth wire encased inand including 15 mm dia GI light grade pipe from upper end of earth plate upto main switch board of building including 20 dia bore GI pipe light grade as water pipe from earth chamber andincluding excavation and earth work, PCC 1:3:6 typeC1 chamber and MS angle iron frame 40x40x3mm and RCC cover 40mm thick (1:2:4) type B1 using 20mm graded stone aggregate reinforced complete all as specified and directed. 121 Supply and laying & testing UG cable XLPE Insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (Heavy duty) 1100 Volts grade with stranded aluminium conductor of size 10 sqmm, 2 core complete all as specified and directed. 122 M&L for sand cushioning laid in trenches for laying of LT UG cables complete all as specified and directed. 123 M&L for old size bricks; common burnt clay building bricks, sub-class ‘B’ designation 75 complete all as specified and directed. 124 S&F GI tubes light grade of dia 80 mm bore dia with all fitting and fixed complete for protection of LT UG Cables laidto walls or in floors or along with poles etc complete all as specified and directed.
