Tender For Special Repairs To Building P-135 And P-136 At Sma Varunapuri Under Ge (Nw) Vasco, Goa; 1 Dismantling/taking out existing hessian base felt or any other existing water proofing treatment from roof including cement plaster and exposing the top surface or RCC slab including removing the dismantled debris to a distance exc 200m & n exc 250m. 2 Material and labour rendering 10mm thick (average) on concrete surface over roof slabs, in cement mortar 1:4,mixed with liquid water proofing compound, finished even and smooth without using extra cement, to receive roof treatment complete all as specified and as directed (Note :- Water proofing compound shall be measured and paid separately) 3 Supply Liquid Water Proofing Compound complete all as specified and as directed. 4 Providing and applying Fiber reinforced elastomeric liquid applied waterproofing membrane, formulated with PU hybrid polymers and reinforcing acrylic fibers and can bear up to 10 bar hydrostatic pressure by using approved damp prrof paint having Sun Reflectivity Index (SRI) of 106.59 on top of concrete roof in three coats @10.8 liter/ 10 sqm. One coat of self-priming of elastomeric waterproofing liquid (dilution with water in the ratio of 3:1) and second coat of undiluted elastomeric waterproofing liquid, followed by 3rd and final coat of undiluted elastomeric waterproofing liquid (dry film thickness of complete application/system not less than 600 microns) with waterproofing warranty of 12 Years. Prior to all this activity Surface preparation to be done by pressure washer to removing Dust, Algae, Fungus, oil, grease, etc and crack filling by Smartcare Textured crack filler up to 10MM wherever required and bigger cracks should be filled with polymer modified cement . On Tile mosaic surface use Smarcare Terrace Tile primer for better adhesion. The Item rate is inclusive of all material with wastage, labor, Tools, Tackles, Consumable, Scaffolding, Etc. 5 Taking down cement plaster of any description on brick or stone walls including racking out joint hacking for key, scrubbing down with water etc. complete all as specified and as directed. 6 Material and labour rendering 15mm thick on brick wall or concrete surface in cement mortar 1:4 finishedfair andwithout using extra cement complete all as specified. 7 Material and labour rendering 10mm thick on wall in cement mortar 1:6 finished fair and even smooth without using extra cement complete all as specified 8 Material and labour for 5mm thick CM 1:3 plaster on ceiling and even smooth without using extra cement complete all as specified and directed. 9 Material and labour for 3mm thick wall décor putty on wall followed by providing and applying single component, high build, elastomeric, crack- bridging, resistant to CO2 & SO2 and Chloride ion diffusion, UV resistant, breathable acrylic coating with elongation at break exceeding 200% Sikagard- 550 W (IN) applied in two coats (each coat 100 micron DFT) on acrylic based primer at an average total thickness of 200 microns DFT in two coats including acrylic resin based primer of approved make as per the recommendation of the manufacturers.The rate quoted for theItem shall deemed to be inclusive of all materials, labors, supervision, tools, tackles, transportation, scaffolding/temporary supports / working platform etc. complete as per specification and as directed. 10 Material and labour for Preparation of newly plastered surface of ceiling and applying two coats of oil bond distemper over a coat of alkali resistant primer including 3mm wall care putty complete all as specified and directed.. 11 Complete removal of existing treatment of ceiling and applying two coats of oil bond distemper over a coat of alkali resistant primer including 3mm wall care putty complete all as specified and directed.. 12 Material and labour for Preparation ofnewly plastered surface and applying two coats of oil bound distemper over a coat of alkali resistant primer on wall surfaces including 3mm wall care putty complete all as specified and directed. 13 Complete removal of existing treatment and applying two coats of oil bound distemper over a coat of alkali resistant primer on wall surfaces including 3mm wall care putty complete all as specified and directed. 14 Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises. complete all as specified and as directed. 15 Rendering 10mm thick cm 1:4 on fair faces of stone masonry wall surfaces, finished even and fair to receive glazed tiles. complete all as specified and as directed. 16 Material and labour for 15 mm thick screed bed or bedding layer of cement mortar 1:6 for laying floor tiles .complete all as specified and as directed. 17 Supply and fix glazed coloured ceramic tiles 450 x 350 x 7mm thickon vertical surfaces such as dado skirting etc withset and jointed in neat cement slurry and pointed in white or coloured cement to match. 18 Supply and fix Non skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exc 0.11 sqm but n exc 0.18 sqm, in floors etc. set as joint free and jointed in neat cement slurry and pointed in white or coloured cement to match. 19 Supply and fix vitrified ceramic tiles8 to 10mm thick (square/rectangular) light shade polished area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match. complete all as specified and as directed. 20 Material and labour machine cut Kota stone slab 20-25 mm as in flooring etc laid over cement screed bed jointed with grey cement slurry mixed with pigment to match the shade the slab including rubbing and polishing complete. 21 Material and labour machine cut Kota stone slab 20-25 mm as in riser of steps, skirting ,dado and window cill etc laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shadeincluding rubbing and polishing complete. 22 Taking down chowkat/frame with shutters n exc 1.5 Sqm (without taking off shutters from the frame)complete all as specified and as directed. 23 Taking down chowkat/frame with shutters exc 1.5 Sqm but n exc 4 Sqm each with shutters (without taking off shutters from the frame)complete all as specified and as directed. 24 Taking down shutter exc 1 Sqm and n.exc 2 sqm each and refixing in same position all as specified and as directed. 25 Cutting holes in brick walls built in cement mortar for inserting hold fast etc depth of embedded portion of hold fasts exc half brick but n exc one brick thick wall and making good to the dismantled portion in cement mortar 1:3 and providing cement concrete 1:2:4 type B1 for concreting of hold fasts. 26 Material and labour 2nd class hard wood for Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints. complete all as specified and as directed. 27 Material and labour 2nd class hardwood 30mm thick Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc, (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc. 28 Supply and fix35mm thick (Factory made) 2nd class hardwoodplain framed, paneled shutter (two or three panel) with lock rail and panel of 9 mm BWP commercial ply or 12mm veneered particle board with commercial veneering onboth faces. The size of rail and stileas per IS 1003 (Part -I) kilnseasoned and chemically pressure treated. 29 Material and labour for preparation of new surface of wood or wood based material over 10 mm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified. 30 Material and labour for preparation of old surface of wood or wood based material over 10 mm width or girth and applying two coats of synthetic enamel paintcomplete all as specified. 31 Supply and fix solid PVC door frame of size 50mm x 47mm made out of 5mm prelaminated PVC sheet reinforced with MS square tube, fixed in position as directed. 32 Supply and fix factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails, MS frame shall be covered with prelaminated colour PVC C channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and both side prelaminated sheet PVC sheets for top rail, lock rain & bottom rail paneling of plain gap insert for top rail & bottom rail paneling of prelaminated PVC sheet 10mm to be fitted in the MS frame welded/sealed to the stiles & rails (stiles and rails feathered at edge) with suitable PVC sheet beading and jointed together with solvent cement supplying & fixing in the frame at site as per specification & drawing. 33 Supply and fix Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows & other Frames/Chowkat of size 65x 125 mm comprising of virgin PVC polymer of K value 58-60(Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives(maximum toxicity index of 12 for 100 gms)fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N(Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made 34 Supply and fix Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60(Suspension Grade), calcium carbonate and naturalfibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge)minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flam of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge.(Note: stainless steel butt hinges and necessary S S screws shall be paid separately) 35 S& F Factory made wire gauzed shutteri.e. panel will be of wire gauze in lieu of PVC sheet panel. The wire gauze shall be wrapped on an additional square 8mm M.S. Solid tube and this tube shall be welded to M.S. tubes. The wire gauge shall be stretched to tighten firmly panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Paneling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing. 36 Supply and fix aluminium powder coated barrel tower bolts of extruded section 150 mm long. complete all as specified and as directed. 37 Supply and fix Aluminium alloy powder coated sliding door bolt 300 mm long with hasp & staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy. 38 Supply and fix stainless steel Butt hinge 100mm size. complete all as specified and as directed. 39 Supply and fix extruded aluminium alloy, fabricated type handle, powder coated 150mm long complete all as specified and as directed. 40 Supply and fix in repair stainless steel wire mesh 0.36mm nominal dia of wire and average width of aperture 1.4mm cut to size and fixed to doors/window shutters and fixed with aluminium wire staples as ordered. 41 Supply and fix mild steel works as in bands, straps, clamps hold fasts and similar small articles conforming to Fe 410-0 or Fe 310-0 42 Supply and fixPowder coated (minimum thickness of powder coated 50 micron)Aluminium anodised frame for door, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete architectural drawings and the directions of Engineer -in-charge.Note: (a) Item shall be paid as per D1 actweight of aluminium section.b) The rate shall be inclusive of the locking arrangement including required builder hardware complete packing with silicon gel around contacting surfaces of aluminium work, and including matching the existing surface area. 43 Supply and fixPowder coated Aluminium (minimum thickness of powder coating 50 micron) for shutters (opening/sliding) for doors, windows and ventilators including providing and fixing hinges/pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (fittings shall be paid for separately) with extruded built up standard tubular sections/appropriate Z sections and other sections of approved making conforming to IS 733 and IS 1285, fixing with dash fasteners of required dis and size, including necessary filling up the gaps at junctions i,e. at top , bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/paneling, CP brass/ stainlesssteel screwall complete as per architectural drawings and the directions of Engineer -in-charge.Note:a) Glazing shall be measured separately.b) Item shall be paid as per D1 act weight of aluminium section.c) The rate quoted shall be inclusive of neoprene beading, glazing clips, screws, etc., as required which shall not be measured for arriving the weight.d) The rate shall be inclusive of the locking arrangement including required builder hardware complete packing with silicon gel around contacting surfaces of aluminium work, and including matching the existing surface area. 44 Supply and fix Aluminium powder coated grill model / design no DG 104 ( 10 mm thick )with DL-102 frame all as specified and as directed. Make: Deco grill or equivalent as approved by GE. 45 Supply and fix Sheetpin headed figured glass ordinary quality ,4 mm thick and glazing with oil putty /wooden / metal beads in squares notexceeding 5 Sq m each all as specified and as directed. 46 All as per Item No 45here in beforebut not exceeding 0.5 sqm each pane all as specified and as directed. 47 Material and labourfor 18 mm thick single side prelaminatedwooden grain solid PVC sheet suitably fixedin shelves, partition and shelves of built in cupboard almirahs book cases, cabinet boxes , racks, pelmet and similar work including all hardware fittings all as specified and as directed. 48 Material and labourfor 18 mm thick both side plain solid PVC sheet suitably fixedin shelves, partition and shelves of built in cupboard almirahs book cases, cabinet boxes , racks, pelmet and similar work including all hardware fittings all as specified and as directed. 49 Supply and fix solid PVC frame (single rebated) of size 60mm x 30mm made out of solid PVC foam with homogenous fine cellular structure having smooth outer integral skin with suitable metal stiffener and fixed with 100 x 8 sheet metal CSK screws complete all as specified and as shown on drawing (Note:- Door frame shall be water proof, termite proof, elegant and should have excellent screws holding strength to fix hinges and hold doors properly for a long life) 50 Supply and fix in repairskitchen sinks with drainage boards made of stainless steel 1mm thick with plugs, washers & wastes, including in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipes over all size 915mm x 460mm bowl size 410mm x 330mm x 160mm 51 Demolition of stone slab and tiles of any description or thickness in floors, aprons etc (laid, bedded and pointed in any mortar) all as specified. 52 Material and labour marble work (Black Granite) 18-20mm thick (table rubbed or polished) as in cooking platforms, window cills, jambs, pillars etc with and including cement mortar 1:4 including pointing in white cement 1:2 using marble dust with admixture of pigment to match with shade of marble 53 Supply and fix in repairs Vitreous china coloured water closet European type with and including jet spraywith P trap complete all as specified and as directed, 54 Supply and fix in repair 600mm x 450mm looking mirror, beveled edge, of selected quality glass, mounted on PTMT frame of overall size including mirror 600mm x600mm of make prayag or equivalent and fixed to wooden plugs with chromium plated brass screws and cup washers. 55 Supply and fix in repair vitreous china WHB, white, flat back, size 550mm x 400mm excluding taps, waste chain, and plug and porcelain stopper but including brackets 56 Supply and fix waste fitting (PTMT) for glazed ware sinks, basins etc half or full threaded with long screwed shanks and fly nuts flange end bedded in red lead cement and other end fixed for 32mm bore 57 Supply and fix in repairBib tap cast copper alloy chromium plated long body fancy type screwed for CPVC piper 15mm bore complete all as specified and as directed. 58 Supply and fix in repairs, pillar taps, fancy type cast copper alloy, with capstan heads chromium plated, screwed down high pressure, with or without lettered Hot or Cold with long screwed shank and fly-nuts, screwed for PVC pipe and fixed (15mm bore) complete all as specified and as directed. 59 Supply and fix in repairs gate valve PTMT, screwed down, high pressure with crutch or butterfly handle, screwed both ends for CPVC pipes 20mm bore. complete all as specified and as directed. 60 Supply and fix in repairs 15mm bore CP Angle stop valve cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for union complete all as specified and directed. 61 Supply and fix in repair PVC Valveless syphonic action type low/ high levelflushing cistern, 10 Ltrs capacity including float valve, ball valve, handle including bracket, PVC flush pipe complete all as specified and as directed.. 62 Supply and fix grating dome 125mm dia with waste holes of PTMT Min wt 140 gms 63 Supply and fix in repairPVC connections, 600mm long with brass CP/PTMT nuts suitable for connecting 15mm bore pipes, superior quality .complete all as specified and as directed. 64 Supply and fix in repairCP shower roses 125mm size, with or without swivel joint including fixing to steel pipe, complete all as specified and as directed. 65 Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landing, steps, cills, sunshades, shelves lintels etc and cutting chases for concealed water tubing or concealed conduit wiring etc and making good, cutting not exc 10cm girth in stone concrete block or slab walls. 66 Supply and fix CPVC water tubing outer dia 20mm, SDR-11 grade with all fittings and fixed complete to walls and ceiling or laid in floors. complete all as specified and as directed. 67 Supply and fix CPVC water tubing outer dia 25mm, SDR-11 grade with all fittings and fixed complete to walls and ceiling or laid in floors. complete all as specified and as directed. 68 Taking up or down steel water tubing 15mm bore and connections, including cleaning for re-fixing complete all as specified and as directed. 69 Taking up or down steel water tubing 20mm bore and connections, including cleaning for re-fixing complete all as specified and as directed. 70 Dismantling PVC water tanks Exc 250 & n exc 500 ltr capacity and removing to store complete all asspecified and as directed. 71 Dismantling PVC water tanks n Exc 250capacity and removing to store complete all asspecified and as directed. 72 Supply and fix in repair 200 Ltr capacity PVC loft tank of rectangular type suitable to fix in kitchen complete all asspecified and as directed. 73 Supply and fix 500 Ltr double layer rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position etc complete all as specified 74 Supply and fix 20mm dia brass ball valvehigh pressure with polythene float and fly nut complete screwed for iron pipe or brass ferrule and fixed as directed Engr- in -Charge. 75 Treating and finishing the sunken portion of WC area n exc 1.2 Sqm each by providing 10mm thick rendering in cm 1:3 with and including water proofing compound andelastomeric membrane and applying two coats of bitumen, providing necessary connection items suitable for WC, providing lime concrete and 1mm thick multiples plastifelt over 20mm thick plain cement concrete 1:2:4 type B0 using 12.5 mm graded crushed trap stone aggregate complete all as directed. 76 All as per item No 75 above but for bath/lobby with out any PVC connection Supply and fixing, area exc 1.2 Sqm and n. exc 2 Sqm each. complete all as specified and as directed. 77 Supply and fix in repair towel rail 600mm long of PTMT fixed with and including chromium plated brass screws and plastic cleats. 78 Supply and fix curtain rails 25mm dia Aluminium with brackets stops rollers etc fixed in repairs. complete all as specified and as directed. 79 Supply and fixin repair Liquid soap container of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats. (Minimum weight 105gms)complete all as specified and as directed. 80 Supply and fixing repair Health faucet (ABS body) mild steel cp suitable for 15 mm dia pipe with 1.25 m long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect all as specified and as directed 81 Demolition of cement concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level).complete all as specified and as directed. 82 Material and labour for PCC 1:2:4 type B0 using 20 mm graded aggregate ,25mm thick as in leveling sub base and all as specified and directed. 83 Demolition of existing cement concrete (reinforced) of any type and in any position not otherwise specifically provided for 84 Material and labour Precast cement concrete type B-1, 1:2:4 (20mm graded stone aggregate) but in landings, coverslabs (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces and jointed in cement mortar 1:6 85 Material and labour RCC Type B1 1:2:4 (using 20mm graded stone aggregate) as in slab supported on walls, beams, columns in floors, deck slabs and in shelves etc. complete all as specified and as directed. 86 Material and labour RCC (nominal mix concrete ) M20 (using 20mm graded stone aggregate) as in slab supported on walls, beams, columns in floors, deck slabs and in shelves etc complete all as specified and as directed 87 Material and labour TMT steel bars 8mm dia, cut to length, bent to shape required and welded to existing reinforcement of any description and any position of RCC structure after binding with mild steel wire annealed n less than 0.9 mm dia s an additinal bar complete all as directed. 88 Mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips. complete all as specified and as directed. 89 Material and labour Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work n exc 200mm thick, horizontal or sloping, for rough finished surfaces of concrete flat. complete all as specified and as directed. 90 Dismantling wrought iron or mild steel work any description not otherwise provided for complete all as specified 91 Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc conforming to Fe 410-W(Gde-E- 250) 92 Dismantling plain or corrugated sheeting, any guage , thickness, including Naintal or similar pattern roof coverings 93 Supply and fix Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having Tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified 94 Dismantling of CI/PVC pipe 110/75mm dia for wall surface all as specified and as directed 95 Supply and fix PVC (SWR) pipe, 75mm bore, single socketed, in any length with rubber ring joints, fixed to walls 96 Supply and fix PVC (SWR) 110mm bore -ditto- as above. complete all as specified and as directed. 97 Supply and fix PVC (SWR) bends 75mm bore any radius dismantling pieces or tapers complete all as specified and as directed. 98 Supply and fix PVC (SWR) bends 110mm bore any radius dismantling pieces or tapers complete all as specified and as directed. 99 Supply and fix PVC (SWR) branch piece, single, (Single Y) equal or unequal with access door, for 75 mm bore pipes complete all as specified and as directed.. 100 Supply and fix PVC (SWR) branch piece, single, (Single Y) equal or unequal with access door, for 110mm bore pipes. complete all as specified and as directed. 101 Supply and fix PVC (SWR) 110 mm diavent cowl. complete all as specified and as directed. 102 Supply and fix PVC (SWR) 75 mm diavent cowl. complete all as specified and as directed. 103 Supply and fix PVC (SWR) 75mm dia floor traps with grating including jointing to waste pipe, fixed in cement concrete type B1 (1:2:4) complete all as specified and as directed. 104 Supply and fix PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement. complete all as specified and as directed. 105 Excavation in trenches n.exc 1.5m in wide n.exc 1.5m depth, for foundations etc or for shafts, wells, cesspits, manholes getting out in soft/loose soil. complete all as specified and as directed. 106 Material and labour PCC 1:4:8 type D2 (40mm graded aggregate) as in foundation. complete all as specified and as directed. 107 Demolition of brick work or stone/ boulder masonry, built in cement mortar or cement lime mortar complete all as specified and as directed. 108 Material and labour Precast cement concrete block masonry 1:3:6 type C-1, using 20mm graded stone aggregate with solid blocks exc 10cm in width and setting in mort 1:6 complete. 109 Material and labour rendering 10mm thick on fair faces of brick work on concrete surfaces in CM 1:6 to be finished even and smooth (without using extra cement). 110 Material and labour returning filling including spreading leveling watering and well ramming in layers not exc 25cm. complete all as specified and as directed. 111 Removing excavated material n exc 50 m and depositing where directed at level n exc 1.5m above the starting point complete all as specified and as directed By Engineer-in-charge. 112 Material and labour 75mm thickPCC 1:4:8 type D-2 using 40mm graded stone aggregate as sub base/floor complete all as specified and as directed. 113 Material and labour sand(crushed stone) filling including spreading, leveling, watering and consolidation in layer. complete all as specified and as directed. 114 Material and labour 60mm thick machine pressed precast concrete interlocking paver blocks (coloured)of any shape and size , M-35 gde laid over sand layer with grey cement and pigment complete all as specified and as directed. 115 Material and labour 75 mm thick cement concrete 1:3:6 type C2 using 40mm graded stone aggregate, finishing the surface even and fair as in plinth protections. 116 Material and labour for preparation of new steelsurfaces if any description l over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified. 117 Taking down U/S aluminium point wiring (light, fan, socket or power ) complete including fittings and fixtures such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc removing materials for taking credit (credit for above items should be made as per conditions separately)and making good the disturbed complete all as specified and directed . 118 Taking down U/Ssubmain wiring Aluminium/ copper of any size/core/type including earth continuity conductor on teak wood or conduit and removing the materials/debris from site and making good the disturbed surfaces of wall etc to match with the original existing finish all as directed. 119 Taking down unserviceable existing TPN DB/ LT Panel / Meter Box withMCCBof any capacity and size and removing from site and making good the disturbed surface of wall etc complete all as specified and as directed. 120 Taking down unserviceable existingDB SPN 8/10/12 way of any capacity and size and removing from site and making good the disturbed surface of wall etc complete all as specified and as directed. 121 M/L Point wiring complete with 1100volt grade PVC insulated unsheathed multistranded 1.5 sqmm copper conductor cable confirming to IS 694 FRLS drawn through and including rigid PVC concealed conduit wiring (medium grade)fixed on wall/ceiling including provision of 1.5 sqmm PVC unsheathed copper conductor as earth conductor and connected to earth dolly, including concealedModular metal flush boxes of suitable size for mountingof modular switches, sockets, regulators etc with frame, cover plate sheet white modular cover of adequate size for housing switches, sockets, fan regulator etc concealed on wallcomplete all as specified and directed. 122 a)One light pointcontrolled by one switch 123 b)One fan/ exhaust fan point controlled by one switch and regulator 124 c) One 3 pin socket, 5 Amps on the same board, with cables 1.5 sq. mm size 125 d) One 3 pin socket outlet, 5 Amps, independent, with cables 1.5 sq. mm size 126 e) One light pointcontrolled by two 2-way switches, with cables 1.5 sqmm. 127 f) One call bell controlled by one push button on the same board with other switches or independent with cables 1.5 sqmm 128 M/L for point wiring complete with FRLS 1100 Volts grade, two runs of PVC insulated unsheathed multistranded 2.5 sqmm coppercable including rigid PVC concealed conduit wiring (medium grade) with one run of 2.5 sqmm PVC insulated and unsheathed multistranded copper conductor cable as earth continuity wire connected to common earth dolly, including concealed modular metal flush boxes of suitable size for mountingof modular switches, sockets, regulators etc with frame, cover plate sheet white modular cover of adequate size for housing switches, sockets, fan regulator etc concealed on wallcomplete all as specified and directed. 129 Material and labour Switch modular type single pole 6/5 Amps one way all as specified and directed. 130 Material and labour switch modular SP two way 230 V complete all as specified and directed by Engineer in charge. 131 Material and labour modular Switch socket combination 2 in 1, 5A 3 Pin and 5A 2 pin combined flush type, 230 V ,complete all as specified and directed by Engineer in charge. 132 Material and labour modular Switch socket combination 2 in 1, 3 pin, 5A /15A combined, 230 V ,complete all as specified and directed by Engineer in charge. 133 Supply and fix Bell push 6 Amp, modular type,230 volts, 50 HZ ,AC supply, all as specified and directed. 134 Supply and fix Ding dongBell, AC, 230 volts, single pole 50 HZ AC supply all as specified and directed. 135 Supply and fix ceiling rose three terminal 230 volt 50 HZ AC supply all as specified and directed. 136 Material and labour for submain wiring complete with 1100volt grade PVC insulated unsheathed multistranded cable with 1100volt grade PVC insulated unsheathed multistranded 02 run of 06 sqmm copper conductor cable confirming to IS 694 FRLS drawn through and including rigid PVC Conduit in Ivory/Grey/white colour medium grade etc fixed on wall/ceiling including provision of 01 run of 4.0 sqmm PVC unsheathed copper conductor and Connected to earth dollycomplete all as specified and as directed. Note :- 02 run of 06 sqmm and 01 run of 4.0 sqm including 01 run of PVC CONDUIT will be measured as one length. complete all as specified and directed. 137 Supply and fixMCB DB, single pole and neutral with suitablerated busbar double door, 12 way 230 volt 50 HZ AC Supply complete all as specified and directed. 138 Supply and fix MCB SP 06 to 32 Amp 230 volts,50Hz,BreakingCapacity 10 KA complete all as specified and directed 139 Material and labourfor RCCBDouble pole, 30mA 25 Amps 230V 50Hz ACcomplete all as specified and as directed. 140 Supply, install, testing and commissioning offactory made LT panel wall mounted made out of CRCA sheet of 2 mm thick indoor type double door compartmentalized constructiontotally enclosed weather, dust and vermin proof with front opening hinged door locking arrangement 415 volt 3 phase4 wires AC 50 Hz having aluminium busbarfor phases and the neutral insulated with PVC sleeves,suitable chamber for fixing single phase electric meter -5 Nos complete, and epoxy powdercoat of spray paint over a coat of red oxideprimercomplete all as specified and directed. Meter box/panel shall be fitted semi concealed on wall. 141 INCOMING (Including) 142 (a) MCCB 415 volts 4 pole 36 KA breaking capacity fixed magnetic setting type of 63 Amps - 01 No 143 (b) R -Y-B phase LED indicating lamps - 03 Nos 144 (c)63 Amp TPN main aluminium busbar 145 OUTGOING (Including) 146 (a) MCB SP & N 32 Amps breaking capacity 10 KA C Curve - 05 Nos 147 (b)Space for mounting single phase energy meter - 05 Nos 148 (c)Copper flexible wires of 6 Sqmm sizefor all feeders/meter connection. 149 Supply and fix Integrated inverter LED battern T5tube light fitting type 1x 20 wattindoor type complete with lithium ion battery with charging time 8 to10 hours and backup time up to 4 hours includingall accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and directedMake: Havells Cat part No:- LHEXACP7FN1W020 or equivalent inBajaj/Wipro/Philips 150 Supply and fixinverter LED light fitting mirror type with high out put diffuser 2 feet , 10 watt 220 v AC with driver holder and LED lamp including withlithium ion battery with charging time 8 to10 hours and backup time up to 3 hours with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and directedMake: Havells or equivalent in Bajaj/ Wipro/Philips 151 Supply and fixdeluxe stepped type electronic fan regulator modular type, 2 modularcomplete all as specified and as directed, Make:- Anchor/Havells/Legrand/Scheinder 152 Supply and fix lamp holder, PVC/polycarbonate type with back plate suitable for batten fitting complete all as specified. 153 Material and labour Earthing complete with galvanized steel earth plate electrode of size 60cm x 60cm x 6mm thick, buried directly in ground vertically earth pit not less than 2.25 mtr deep below the ground level with top to edge of the plate not less than 1.5 mtr below ground level connected to galvanized earth wire 4 mm dia by means of blots, nuts, check nut and washer of galvanized steel, includingnecessary earth work and excavation in any strata and PCC 1:3:6 type C2 chamber and RCC cover and light grade GI pipe 15mm dia pipe of requiredlength for protection of GI wire and water funnel and wire mesh with GI pipe medium grade 20mm dia etc complete all as per electrical plate No 3 of SSR part - I and all directed including connections and testing on completion. Note :- If the desired earthing result not achieved the earthing will be redone by the contractor without any extra cost. 154 Supply and fix invertors LED bulb of 9 Watt . Make :- Havells Cat part NO:- LHLDEGEDML80009 , lumen output 900 Lumen , 6500 K base cap B22 or equivalent inBajaj/Wipro/Philips 155 Material and labour for rewinding u/s ceiling/exhaust fan by opening the body cover of c/fan, exhaust fan, any type , any make and cutting the existing winding without damaging the stator removing the coil insulation and rewinding with new wire of suitable gauge with correct number of turns of auxiliary and main winding , varnishing and baking complete and soldering new lead of copper wire three core cables of size 23/0.0076 testing, refixing and commissioning complete including transportation from area of AGE E/M II to workshop and back to Area of AGE E/M II complete all as specified and directed for the following sizes . 156 a) Ceiling Fan Note: Minor Spare parts will be included in the quoted rate 157 b) Exhaust FanNote: Minor Spare parts will be included in the quoted rate 158 Taking down and dismantling of ceiling fan of any make and sweep 1200 mmfrom its installed location servicing the fan by cleaning ,greasing,oiling,painting with One coat of existing colour including replacement of worm out nut bolts with rubber reel , split pins, quarter pin, push bearing, ball bearing, Fan blade, Fan motorand check nutsand installing back to its original position, rate includes Rate include anchor fastener bolt complete all as specified and directed.Note:- painting, nut bolts with rubber reel, split pins/quarter pin, push bearing, ball bearing, shall be measured and paid separately 159 Supply and fix in repairsrubber reel with MS nut Bolt, split/quarter pin for hanging ceiling fan suitable for C/fan complete all as specified and directed . 160 Supply and fix in repairs ball bearing suitable for size of Ceiling fan any type and any make complete all as specified and directed . 161 Supply and fix in repairs capacitor of capacity 2.5mfd, 230 V for ceiling fan including removing old one complete all as specified and directed . 162 Material and labour for Painting of ceiling fan complete, in situ with synthetic enamel paint by spraying including filling cavities with filter, one coat after cleaning at dust etc. 163 Supply and fix in repairs plastic canopy top and bottom with tighten screw suitable for ceiling fan of any sweep/type. 164 Supply and fix down rodmade of MS pipe medium grade 15mm dia of 300/600mm long duly drilled holes both ends & slot with hole in other end suitable for fixing of ceiling fan of any sweep/type and painting to of down rodwith two coat of synthetic enamel paintover one coat of red oxide primer. 165 Taking down and dismantling of Exhaust fan of any make and sweep up to 300 mm from its installed location servicing the exhaust fan by cleaning ,greasing,oiling,painting with one coat of existing colour, ball bearing, anchor fastener bolt, rewindingand installing back to its original position, Rate include anchor fastener bolt and check nuts, complete all as specified and directed.Note:- painting, ball bearing, rewinding, anchor fastener bolt shall be measured and paid separately 166 Supply and fix in repairs ball bearing suitable any make and sweep up to 300 mm exhaust fan any type and any make complete all as specified and directed . 167 Material and labour for Painting of exhaust fan complete, in situ with synthetic enamel paint by spraying including filling cavities with filter, two coat after cleaning at dust etc. 168 Supply and fixheavy duty metal frame of 300 mm sweep exhaust fanall as specified. 169 Supply and fix in repairs capacitor 230 V for Exhaust fan including removing old one complete all as specified and directed . 170 Supply and fix in repairs anchor fastener bolt suitable any make and sweep up to 100 mm for Exhaust fan or Geyser complete all as specified and directed. 171 Removing inlet and outlet water connection , taking down existing Geysers storage type10/15/25/50 Ltr capacity and then checking of thermostat , heating element, 15 Amp Plug Top and socket, PVC connection pipe hot and cold, NRV and safety devices inner control valves, cables etc including cleaning of inner storage tank complete and fixing back testing complete all as directed.Note :- U/S items to be replaced shall be measured and paid separately. 172 Supply and fix in repairsthermostat BI- metal thermal relay suitable for 10/15/25 Ltrs geyser 173 Supply and fix in repairs indicator lamp for geysers (Set of 2) 174 Supply and fix in repairs heating element threaded/ push type1500 watts / 2000 watts for 10/15/25 Ltr geysers of any make 175 Supply and fix in repairs PVCconnection heavy duty 15mm size with PTMT nut of length 450 mm for hot /cold water connection 176 Supply and fix in repairs PVC three core cable 2.5 sqmm sheathed cable copper conductor 177 Supply and fix in repairs 15 Amps plug Top for geysers complete all as specified and directed . 178 Supply and fix repair suitable non return valve for any type of Geyser 179 Supply and fix in repairMultiple safety Device for any type Geyser 180 Spray painting of geysers of 10/15/25 Ltrs capacity with two coats of enamel paint over a coat of red oxide primer after removing the existing painting and cleaning the surface etc including removing from the position and re-fixing the same in original position etc complete all as specified and as directed. 181 Supply and Fix in repairs for louvers of any make up to 300 mm exhaust fan, at any Bldg and at any Floor complete all as specified and as directed by Engr in Charge.
