Tender For Comprehensive Maintenance And Periodical To Wt And Squadron At Ina Ezhimala; 2. Contractor should buy the exact items which are given with Catalogue reference. Other makes will be approved only by submitting non availability certificate from company. Contractor need to remove all the dismantled items without delay after the schedule of credit is removed from the RAR. 3. Rate quoted for demolition/dismantling/ taking down is inclusive of removing the same from site and disposing at given locations anywhere inside INA Ezhimala.4. In any painting works, contractor need to clean the area and remove the drop marks from floors, doors, windows, sills, inbuilt furniture items etc.. Otherwise,a recovery of Rs. 10.00 per sqm in internal paintings and Rs 5.00 per sqm for external paintings will be made from contractor.5. Contractor should maintain seperate registers for plumbing and carpenter repairs works. Day to day complaints should be noted in those registers with Sl nos of complaints, location, qty of work, status of complaints and signature of Incharge and stamp of the Office. Format will be given from AGE B/R 1 Office. Contractor should obtain the signature of incharge on the same day of work. These registers to be submitted to JE(Civil) on every weekend without fail. Also submitted alongwith RAR duly signed.Contd......... 2 Notes...(Contd)...6. List of complaints will be given to contractor as and when received from users and Contractor should ensure all the works will be completed within 48hrs.7. Contractor should ensure that plumbing complaints resulting in wastage of water should be attended and rectified within 24 hours. Otherwise, a recovery of 25 % of corresponding item will be made from contractor for every day delay.8. Contractor will make his own arangement to store his items. 9.Some places in this contract where the vehicle will not reach the spot directly, the material will be moved manually in these places.The rate quoted will be considered all inclusive on this account. 10.All trade skilled labour required in this contract shall be present daily in working hours, irrespective of complaint received.11.Complaint for a similiar items may be in scattered/different area , quoted rate will be considered all inslusive on this account. 12. Empty tins / cans of paint shall not be removed from site till completion of work. 3 Material & Labour for applying two coatsof antifungal/weather resistant acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance,dirt resistance exterior paint of required shade(Company Depot Tinted) with silicon additives, coverage @6 to 7Sqm/Ltr (two coats) over old painted including complete removal of existing treatment/preparation of existing surfaces as per site condition and cleaning the surfaces with bior wash to receive new treatment. 4 Material and labour for preparation of old decorated surfaces of walls and applying one coat of acrylic emulsion (interior grade) on wall including necessary scaffoldingsall as specified and as per manufacturers instructions and as directed. 5 Material and labour for preparation of old decorated surfaces and applying one coat of acrylic emulsion (interior grade) on ceiling including necessary scaffoldingsall as specified and as permanufacturers instructions. 6 Material and labour for one coat of synthetic enamel paint on wall of any description match with existing colour including preparation of old surfaces complete all as specified and as directed. 7 Taking down shutter of any description exc 1 Sqm but n exc 2 Sqm each and refixing the same after carrying out repairss including providing new necessary aluminium / MS rods as extra stiffening members for doors and refixing in same position. 8 Supply and fix in repairs 75 mm anodised aluminium barrel tower bolt of extruded section 9 Supply and fix in repairs 100 mm anodised aluminium barrel tower bolt of extruded section 10 Supply and fix in repairs 150mm anodised aluminium barrel tower bolt of extruded section 11 Supply and fix in repairs 100 mm extruded aluminium anodised alloy handles fabricated type 12 Supply and fix in repairs 150mm extruded aluminium anodised alloy handles fabricated type 13 Supply and fix in repairs 75 mm stainless steel butt hinges, cold rolled medium weight all as specified and as directed 14 Supply and fix in repairs 100 mm stainless steel butt hinges, cold rolled medium weight all as specified and as directed 15 Supply and fix in repairs aluminium powder coated Ebco handles, suitable for locking windows / ventilators all as specified and as directed. 16 Supply and fix in repairs 250 mm aluminum alloy anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminum alloy all as specified and as directed. 17 Supply and fix in repairs 300mm aluminum alloy anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminum alloy all as specified and as directed. 18 Supply and fix in repairs mortice lock 100 mm to 150 mm long suitable for existing aluminium doors matching with the existing 19 Supply and fix in repairsaluminum anodized tubular towel rail 20mm dia including brackets complete all as specified and as directed. 20 Supply and fix in repairs floor door stopper 150mm size aluminium alloy body and tongue double legged, anodised fixed to door all as specified and as directed. 21 Supply and fix in repairs aluminium coat hook solid body matching with existing ones. 22 Supply and fix in repairs aluminium expanded metal mesh 0.45 mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminum staples or beading complete.Rate of taking down and refixing of shutters of any description for repairs of mesh will be included in quoted rate. 23 Supply and fix in repairs SS 304 friction stay of 300 mm long suitable for window/ventilator shutters all as specified and as directed. 24 Taking down cement plaster of any description or thickness/chipping of cement concrete in any situation from brick or concrete surface including raking out joints, hacking for key scrubbing down with water to receive new plastercomplete all as specified and as directed. 25 Material and labour for rendering 15mm thick on fair faces of brick work or concrete surfaces in CM 1:4 finished even & smooth without using extra cement mixed with liquid water proofing compoundall as specified and as directed.Note - Liquid water proofing compound measured & paid separately. 26 Supply only Liquid Water proofing compound of approved quality. 27 Material and labour, preparation of newly plastered wall surfaces and applying two coats of acrylic emulsion all round (internal /external) over a coat of primer complete all as specified and as directed. 28 Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc. laid bedded and pointed in any mortar. 29 Material and labour, chequered cement concrete tiles 250x250x25mm / 300x300x25mm thick in floors, with mixture of grey cement and pigments, set, jointed and pointed in neat cement slurry over and including20mm thick screed bed in CM 1:6 all as specified and as directed. 30 Material and labourmachine cut kota stone slab flooring with 20-25mm thick over 20mm thick screed bed in CM 1:4 and jointed with grey cement slurry and pointed with white cement mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed. 31 Material and labour 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over and including 15 mm thick backing coat in CM 1:4 and rubbing and polishing complete all as specified and as directed. 32 Material and labour, coloured Non-skid ceramic tiles (square/rectangular) 7 to 8mm thick in floors, area of each tile exc.0.11 sqm but n.exc 0.18 sqm, set and jointed in neat cement slurry and pointed in white cement mixed with matching pigment over and including 20mm thick screed bed in CM 1:6 or approved tile adhesives all as specified.(work shall be carried out in patches) 33 Material and labour, coloured Non-skid ceramic tiles (square/rectangular) 7 to 8mm thick in floors in patches, area of each tile exc.0.06 sqm but n.exc 0.11 sqm, set and jointed in neat cement slurry and pointed in white cement mixed with matching pigment over and including 20mm thick screed bed in CM 1:6/ approved tile adhesive all as specified.(work shall be carried out in patches) 34 Material and labour for vitrified Ceramic light shade tiles 10mm thick ( square / rectangular ), polished, area of each tiles exceeding 0.36 Sqm, n.exc 1 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles over and including 20mm thick screed bed in CM 1:6/ approved tile adhesive all as specified and as directed. 35 Dismantling floor hearth or wall tiling including cement mortar bedding ( but not backing) removing serviceable tiles to store and rubbish off the premises, complete all as specified and as directed. 36 Material and labour, Glazed ceramic coloured tiles 300X200X6 to 7mm thick in vertical surfaces of stone/brick wall, set and jointed in neat cement slurry and pointed in coloured cement to match over and including 15mm thick backing coat plaster in CM 1:4 all as specified.(work shall be carried out in patches) 37 Material and labourfor vitrified ceramic tiles 10mm thick (square/rectangular), light shade polished, area of each tiles exc 0.36 sqm and not exc. exceeding 1 sqm, in skirting/dado etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match of light shade including 15 mm thick backing coat plaster in CM (1:4) / approved tile adhesive complete as specified and as directed.(work shall be carried out in patches). 38 Material and labourmachine cut kota stone slab 20-25 mm thick in riser of steps, skirting-dado and pillar laid , jointed with grey cement slurry and pointed with white cement mixed with pigment to match the shade of the slab over and including 15 mm thick backing coat in CM 1:4 and rubbing and polishing complete all as specified and as directed. 39 Demoltion of cement concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) 40 Material and labour for cement concrete 1:2:4, type B1 (20mm graded stoneaggregate) in roof slabpadding and roof kerbpreparatory to roof treatment, complete all as specified and as directed. 41 Hacking out old broken glass (any thickness, size, quality or description) from wooden / aluminum frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads. 42 Material and labour 4.8 mm thick sheet glass ordinary quality any size in each pane and glazing with aluminium beading complete all as specified and as directed. 43 Material and labour for Precast RCC 1:2:4, type B-1 (using 20 mm graded stone agg) in slabs , landings,and in shelves and the like set in CM 1:6 all as specified and as directed. 44 Material and labour formild steel TMT bars8 mm dia barcut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as specified and as directed. 45 Supply and fix in repairs vitreous china wash basin counter sunk type oval shape, star white including waste coupling chromium plated,fixing brackets, cutting for and pinning in ends of brackets complete all as specified and as directed. 46 Supply and fix in repairs vitreous china, wash down water closet(EWC) starwhitewith seat cover, closed pattern with flat bottom and cover with mild steel (CP) or aluminium hinging device fixed with necessary bolts complete all as specified and as directed. 47 Supply and fix in repairs vitreous China Urinal, half stall type, with and including waste couplingCP of 40 mm and all fixing acessories complete. 48 Supply and fix in repairs vitreous China Urinal partition, with and including all fixing acessories complete. 49 Supply and fix pillar taps 15 mm size, brass chromium plated swan neck type screwed down high pressure screwed for iron pipe & fixed complete 50 Supply and fix in repairs 10 ltrs capacity PVC valveless syphonic action type flushing cistern low level with inlet ball valve, float and handle including brackets. 51 Supply and fix in repairs bib tap 15 mm size, brass chromium plated rust proof complete 52 Supply and fix in repairs15mm dia Angular stop valve, Brass chromium plated 53 Supply and fix in repairs Brass CP wall mixer15 mm dia bore for mixing hot and cold water screwed down for iron pipe and fixed all as specified and directed by Engineer-in-charge complete. 54 Supply and fix in repairs Urinal spreader of brass chromium platedfancy type suitable for 15 mm bore pipe. 55 Supply and fix in repairs PVC connections 15mm size with PTMT nuts of length 450mm. 56 Supply and fix in repairs Stainless steel towel rail 60 CM long. 57 Supply and fix in repairs Chromium platedtowel ring round with round flange 58 Supply and fixin repairs stainless steel soap dish of approved pattern all as specified and as directed. 59 Supply and fix in repairs CP Brass Shower rose with arm complete. 60 Supply and fix in repairs bevelled edge mirror 6 mm thick selected quality glass of any area and fixed to wooden plugs with chromium plated brass screw and cup washers all as specified and as directed. 61 Supplying and laying of 20 mm dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floorsincluding taking up or down old un serviceable pipes complete all as specified and as directed. 62 Supplying and laying of 25 mm dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floorsincluding taking up or down old un serviceable pipes complete all as specified and as directed. 63 Supplying and laying of 32 mm dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floorsincluding taking up or down old un serviceable pipes complete all as specified and as directed. 64 Dismantling drainage/sewage line of 110mm dia pipes, jointed in cement mortar and taking out of trenches, if required. 65 Supply and fix PVC (SWR) pipes of 110mm dia single socketed in any length with rubber ring joints fixed to walls completeall as specified and as directed. 66 Dismantling drainage/sewage line of 75mm dia pipes, jointed in cement mortar and taking out of trenches. 67 Supply and fix PVC (SWR) pipes of 75 mm dia single socketed in any length with rubber ring joints fixed to walls completeall as specified and as directed. 68 Supply and fix in repairs plastic water closet seat cover white coloured closed pattern with flat bottom and cover and MSCP or aluminised hinging device 69 Supply and fix in repairs 15mm bore chromium plated pillar tap taps (fancy type), long body cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipes all as specified and as directed. 70 Supply and fix in repairs 15mm dia Bib tap standard of PTMT fancy type any colour high pressure screwed for iron pipe and fixed. (Minimum weight 15mm-90gms/20mm- 125gms). 71 Supply and fix in repairs angular stop valve, cast copper alloy, screwed down, high pressure with crutch or butterfly handle, chromium plated, fancy type, screwed both ends for iron pipe or for union and fixed, suitable for 15 mm bore pipe,complete all as specified and as directed. 72 Supply and fix in repairs 15mm bore chromium plated bib taps (fancy type), long body cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipes all as specified and as directed. 73 Supply and fix in repairs 15mm bore stop valve (concealed type), chromium plated cast copper alloy (long shank, fancy type) screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipesall as specified and as directed. 74 Supply and fix Chromium platedtowel ring fixed with CP cast copper alloyscrew fixed in repairss all as specified and as directed. 75 Supply and fix in repairs cast copper alloy, chromium plated towel rail, 600mm long complete. 76 Supply and fix in repairs cast copper alloy, chromium plated toilet paper holder, complete. 77 Supply and fix in repairs chromium plated health faucets (hand held shower type) with shut off valve (thumb or push button type) to allow controlled and continuous flow of water with adequate length and wall mounted pedestal for hanging the faucet etc complete. 78 Supply and fix rotational moulded PVC water storage tanks 500 ltr capacity (cylindrical vertical with closed top) hoisted and fixed in positionall as specified including taking down old broken/cracked water tank and reconnecting the water pipe line in position. 79 All as per item No 77.00 here-in-before but 1500 Ltr capacity. 80 All as per item No 77.00 here-in-before but 1000 Ltr capacity. 81 All as per item No 77.00 here-in-before but 2000 Ltr capacity. 82 Supply and fix Nipple suitable for HDPE water tank. (Minimum weight 15 mm-38gms/20mm- 45gms /25mm- 65gms) 25 mm 83 Supply and fix in repairs of 40 mm dia Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed all as specified and as directed. 84 All as per item No 82 here-in-before but of 25 mm dia 85 Supply and fix in repairs PVC tank cover suitable for any capacity of tank including brackets and all necessary items all as directed. 86 Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc including writing the date of cleaning on surface of tanks with synthetic enamel paint with font size not less than 70 mm height of following capacity:- 87 500 litres capacity 88 1000 litres capacity 89 2000 litres capacity 90 Disconnecting existing tanks of any capacity, setting aside (or lowering if required) for repairss, cleaning, etc. and hoisting if required reconnecting and re-fixing in position. Cleaning will be measured seperately under above item No 84. 91 500 litres capacity 92 1000 litres capacity 93 2000 litres capacity 94 Supply and fix in repairs 32mm dia PVC flexible waste pipe for urinals/WHB/sink all as specified and as directed. 95 Supply and fix in repairs stainless steel grating of 150mm sizefixed with white cement including matching shade pigment, complete all as specified and as directed. 96 Material and labour plywood 18 mm thick, grade BWP, type BB, having one side decorative teak veneer fixed with screws to timber frame work, in repairsof drawers and parts of fixed built in furniture complete all as specified and directed including taking down of old plywood. 97 Material and labour plywood 12 mm thick, grade BWP, type BB, fixed with screws to timber frame work and repairs to drawers complete all as specified and directed including taking down of old plywood. 98 Material and labour for 0.9 mm thickdecorative laminate type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturers instructions including taking down of old laminate. 99 Supply and fix in repairs 400 to 500 mm long telescopic channel SS 304 fixed on existing cupboard drawers including taking down of old one. 100 Supply and fix in repairs aluminium hasp and staple 75 mm aluminium anodised and fixed with screws. 101 Supply and fix in repairs 40mm dia, cupboard knobs fixed with nut, screw and washer of mild steel, bright finished 102 Supply and fix in repairs Brass chromium plated bottle traps for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed 32 mm bore
