Construction Of Machinery Shed (499.59 Sq.M.)- 1 Shed Work 2 Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area & stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5 m.) By Mechanical Means ( S.S.R. OF 2022-23I.No. 21.02 P.No. 115) 3 Excavation for foundation in hard murum including removing the excavated material upto distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.50 m) By Mechanical Means ( S.S.R. I.No. 21.06 P.No. 115 ) 4 Providing and laying Cast in situ/Ready Mix cement concrete in M-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete.With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) (S. e-S.S.R. I.No. 24.01 P.No. 131 5 Providing and laying in situ/Ready Mix cement concreteM-20 of trap/ granite/quartzite/gneiss metal for R.C.C.work in foundations like raft,strip foundations, grillage and footings of R.C.C.columns and steel stanchions etc.including bailing out water, formwork, laying/pumping cover blocks,compaction and curing roughening the surface if special finish is to be provided(Excluding reinforcement and structural steel) etc. complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete.With natural sand/V.S.I. quality Artificial Sand ( S- S.S.R. I.No. 25.11, P.No. 133) 6 Providing and laying Cast in situ /Ready Mix cement concrete M20 of trap /granite/quartzite/gneiss metal for R.C.C.columns as per detailed designs and drawing or as directed including centering,formwork,cover blocks ,laying/ pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curingetc.complete,(Excluding reinforcement and structural steel).with fully automatic microprocess or based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Panmixer )etc.complete.With natural sand /V.S.I. quality ArtificialSand ( S- S.S.R. I.No. 25.31, P.No. 134) 7 Providing and laying Cast in situ /Ready Mix cement concrete M20 of trap/granite/quartzite/gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including centering,formwork,cover blocks,laying/pumping, compaction and roughening the surface if special finish is to be provided and curing etc.complete. (Excluding reinforcement and structural steel).with fully automatic microprocessor based PLC with SCAD Aenabled reversible Drum Type mixer/ concreteBatch mix plant (Panmixer) etc .complete. With naturalsand /V.S.I. quality Artificial Sand( S- S.S.R. I.No. 25.50, P.No. 135) 8 Providing and laying Cast insitu /Ready Mix cement concrete M20 of trap/granite/ quartzite/gneiss metal for R.C.C. slab sand landings as per detailed designs and drawings including centering,formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finishis to be provided and curing etc. complete, (Excluding reinforcement and structural steel). with fully automatic microprocessor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Panmixer) etc. complete. With natural sand /V.S.I. quality Artificial Sand ( S.S.R. I.No. 25.70, P.No. 135) 9 Providing and fixing in position TMT-FE-500 bar reinforcement of various diameters for R.C.C .pile caps, footings, foundations, slabs,beams, columns ,canopies, staircase, newels,chajjas, lintels, pardis, copings, fins,arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete( S.S.R. I.No.26.33, P.No. 139) 10 Filling in plinth and floors with contractors material/ brought from out side and approved by Engineer incharge in layers of 15 cm to 20 cm including watering and compaction etc. Complete (Spec.No.Bd.A.11 page No.263)(S.S.R.I.No. 21.37, P.No. 117 ) 11 Providing masonry with conventional / Indian Standard type bricks in cement mortar 1:6 in foundation and plinth of inner walls / in plinth of external walls including bailing out water manually, striking joints on unexposed faces, raking out joints on exposed faces and watering complete. (Spec.No.Bd.G.1 page No.313) (S.S.R.I.No. 27.01, P.No.144) 12 Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 mm thick in cement mortar 1:4 using waterproofing compound at 1 kg per cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 mm thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etc.complete. Spec. :Bd.L.7 Page No. 369 (S.S.R. I. No. 32.11 P. 153 ) 13 Providing and laying in situ cement concrete M20 with tremix treatment for 100 mm thickness for flooring with groove cutting of 4mm wide and 20mm deep with necessaryrefilling with bitumen etc. complete.(S.S.R. I. No. 33.30 P. 158 ) 14 Providing and fixing in position powder coated aluminium louvered windows / ventilator of various sizes with powder coating as per detailed drawing and specifications including aluminium frames 80 x 38 mm x 1.22 mm box type, 5 mm thick sheet glass louvers, of approved quality etc. complete.(S.S.R. I.No.39.68 P. No. 188) 15 Providing and fixing corrugated galvanised iron sheets of 0.63mm thick (24 B.W.G.) for roofing without wind tiles including fastening with galvanised iron screws and bolts,lead and bitumen washers as per drawing etc.complete.(Weight of 5.5 kg/sq.m.).(S.S.R. I.No. 38.05 P. No. 171) 16 Providing and fabricating structural steel work in rolled sections like joists, channels, angles, tees etc. as per detailed design and drawings or as directed including cutting, fabricating, hoisting, erecting, fixing in position making riveted / bolted /welded connections without connecting plates, braces etc. and including one coat of anticorrosive paint and over it two coats of oil painting of approved quality and shade etc. complete.(S.S.R. I.No. 23.02 P. No. 129) 17 Providing and fixing rolling shutter fabricated from steel laths of minimum thickness 0.9mm with lock plate of 3.15mm thickness reinforced with 35x35x5 mm angle section fitted with sliding bolts and handles for both sides, deep M.S.channel section of depth and thickness not less than 65mm and 3.15mm respectively with hold fast arrangements, M.S.Bracket plate 300x300x3.15mm (S.S.R. I.No. 39.25P. No. 164) 18 Shed Electricity 19 Supplying,erecting&terminatingXLPEarmouredcable3 core6sq.mm.copperconductorcontinuous5.48sq.mm. (12SWG)G.I.earthwirecompleteerectedwithglands& lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU 20 Makingtrenchofsuitablewidthanddepthinhardmurum/ tar roadfor layingprovided LTcable upto andincluding 16 sq. mm complete as per specification no. CW-EXNCTR 21 Makingtrenchofsuitablewidthanddepthinsoftsoilfor layingprovidedLTcableuptoandincluding16sq.mm complete as per specification no. CW-EXN-CTR 22 Supplying & erecting mains PVC unarmoured cable 1100Volt gradeISImark3core/2.5sqmmstranded/solidcopper completeerectedonwallwithdulypaintedG.I.Saddle@ 23 Supplying & erecting weatherproof powder coated distribution board 4 way with 2 x 6/10 Amp S. P. M. C. B. with industrialtwopinplugsocket10Aand3pinplugtop10A with top cover necessary connection etc complete with approved make. 24 ProvidingpointwiringforstreetlightwithPVCunarmoured cable1100VoltgradeISImark3core1.5sqmmstranded/ solid copper erected on wall with G. I. Saddle duly painted @ 0,25 m C/C rigidly grouted in the wall with the help of platedscrew including 4” x 4” M. S. box 2 way with epoxy painting & 25 Supplying & erecting 10-12W, 230V integral type LED Lamp suitable for B-22/E-27 base. 26 Supplying and erecting LED street light fitting suitable for20 to25W,withPF>0.95classIP65andabovehousingof pressurediecastaluminiumalloyandheatsinkextruded aluminium complete as per specification No FG-ODF/FLS 27 SupplyinganderectingstreetlightWallbracketmadefrom 40 mm. dia ‘B’ class G.I. pipe 1.2 m in total length complete as per specification no. FG-BKT/WB 28 Providing earthingwith galvanizediron earthplate size60 x 60x 0.6cmcompletewithallmaterials,testing&recording the results as per specification no. EA-EP 29 Providing pipe type earthing with 40mm. dia. G.l. pipe or 20 mm dia. G.l. Rod complete with all materials as per specification no. EA-EP 30 Supplying, erecting & marking DPMCB 6A to 32A,C- series (for motor/power) in provided distribution board as per specification no. SW-SWR/MCB 31 Supplying,erecting&markingSPMCB6Ato 32A,B- series (for lighting) in provided distribution board as per specification no. SW-SWR/MCB 32 SupplyinganderectingGIsheet1.6mm(16 SWG)tobe usedforfabricationofboxespanelboardsetc.including cutting,bending,drilling,welding,rivetingetc.andpainting with one coat of red lead paint and 2 coats of enamel paint. 33 Supplying and erecting marine plywood 18/19 mm thick fixed towall or onprovided panel board withnecessary materials such as screws, wall fasteners, supports, nut bolts etc. complete. 34 Supplyinganderectingtriplepoleandneutraldistribution board(TPNDB)surface/flushmountedsuitableforSPMCB of 12 ways on iron / GI frame (horizontal busbar type) as per specification no. SW-SWR/MCBDB 35 Supplying&erectingG.I.pipe‘A’ class25mmdia.erected forenclosing XLPE armoured cable onwall/pole asper specification no. CB-CE 36 Supplying & erecting G.I. pipe ‘A’ class 40 mmdia. erected forenclosing XLPE armoured cable onwall/pole asper specification no. CB-CE 37 Supplying and laying (including excavation of suitable width & depth up to 90 cm) 75 mm outside dia. double wall corrugated pipes (DWC) of HDPE for enclosingcable below ground/road surface, to required depth complete. 38 Supplying & erecting Single compression type brass cable glands for 3 to4core6sq.mm./2to4core10sq.mm.forXLPE armoured cable as per specification No. CB-GL 39 Point wiring for independent plug in 20 mm ISI markedHMS PVCconduitwith1.5sq.mm(2+1E)FRLSHgrade copper wire, flush type switch, earthing and requiredaccessories as per specification No: WG-PW/SW 40 SupplyinganderectingStreetlightbracketmadefrom25 mm. dia ‗B‘ class G.I. Pipe, 0.6 min length along with pole capof300mmlengthand80mmdiadulyweldedwith provided leads as per specification no. FG-BKT/BPC 41 Supplying&erectingmainswith2x2.5Sq.mmstranded copper PVC insulated wire with 2 x 1.5Sq.mmcopper PVC wire in PVC casing - caping20 mm on wall / ceiling. 42 Supplying&erectingmainwith2x4.00Sq.mmstranded copper PVC insulated wire with 2 x 1.5Sq.mmcopper PVC wire in PVC casing - capingon wall / ceiling. 43 Supplying and erecting 2 pole metal clad changeover switch with HC type fuse and neutral link 240V, 32A on iron / GI frame as per specification no. SW-SWR/MDP .. 44 Supplying&erecting3W,230VintegraltypeLEDLamp suitable for B-22/E-27 base. 45 Supplying and erecting T8 Fluorescent tube day light 1200mm 36 W 46 Supplying&erectingreadytouseRetrofitT8LED18/20 tubelightwithpolycarbonatebody,heatsink,integratedHF electronicdrivercomplete&compatibletoT8/T12LED luminaire by disconnecting starter & ballast if necessary. 47 Supplying and erecting regular/ standard model ceiling fan of 900/1050mm.sweepcompleteerectedinpositionasper specification no. FG-FN/CF 48 Supplying and fixing wiremesh (Jali) cover suitable for fitting / fanorforanypurpose,completewithnecessarymaterials. The jali cover shall be made from good quality G.I. wire mesh 49 Supplyinganderectingdingdong/electronicmusicaltype call bell with heavy duty coil suitable to operate on 230V A.C. supplyerectedonpolisheddoublewoodenblock/sunmicablock of suitable size 50 SupplyinganderectingstreetlightWallbracketmadefrom 25 mm. dia ‘B’ class G.I. pipe 1.2 m in total length complete as per specification no. FG-BKT/WB 51 Supplying & erecting CRCA sheet metal one wayenclosures suitable for DP MCB /TP MCB /FP MCB erected on angle iron/GI frame complete. 52 Supplying erecting and marking four pole isolators only switch version of miniature circuit breakers of 40A in provided distribution board complete. 53 Warehouse Royalty 54 SAND 55 OTHER MINERALS 56 Warehouse Testing 57 BASIC TEST OF AGGREGATE 58 Water Absorption, Specific Gravity,Impact Value, Crushing Value. 59 Sieve Analysis. 60 Abrasion Value. 61 Flakiness Index & Elongation Index. 62 BRICKS Water Absorption (Set of 5 Bricks), Compressive Strength( Set of 5 Bricks), Efflorescence (Set of 5 Bricks). 63 Steel bar testing upto 16 mm (set of 3 bars)(Tensile strength, %, Elongation, Yield Stress,Weight-Per Meter, Bend / Rebend Test, Proof Stress.) 64 CONCRETE 65 Compressive Strength OF C.C. Cube (Set of 3 cubes). 66 Concrete Mix Design (With all Tests on basic materials) M-20 67 ManagementStrategiesandImplementationPlan(MSIP)tomanagetheEnvironmental,Social,Health and Safety (ESHS) risks and ESHS Code of Conduct
