Tender For Repair To Joinery And Allied Works At Map Accommodations Of Sevoke Road Mil Stn Under Ge Sevoke Road.; 1 Dismantling floor hearth or wall tiling and stone slabs including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises etc complete all as directed 2 Taking down chowkhats or frame with shutters (without taking off shutters from the frame) not exceeding 1.50 Sqm each, complete all as directed. 3 Taking down chowkhats or framewith shutters (without taking off shutters from frames) exceeding 1.5 sqmtrbut not exceeding 4 sq m each, complete all as directed. 4 Taking down shutters of any descriptionexceeding 1 sqmtrbut not exceeding 2 sq m each complete all as directed. 5 Dismantling of timber boarding, any description, fixed in any position with nails complete all as directed. 6 Taking down cement plaster or lime plaster on walls /ceiling of any description from concrete or brick wall etc including raking out joints, hacking for key, scrubbing down with water and disposing off the retrieved debris as directedincluding necessary scaffoldings etc complete all as specified and directed 7 Materials and labour for PCC 1:3:6 type C1 (using 20mm graded stone aggregate) as in block for hold fast, filling in frames, copings or similar work and finished the surface with existing and including form workcomplete all as specified and directed. . 8 Supply & fixing rolled mild steel Fe 290 Gde-E-165 joist, channel, angle or tee sections fixed independently, without connecting plates etc (cut to ordinary lengths i.e. within 20mm of the length indicated) complete all as specified and as directed. 9 Supply & fixing rolled mild steel Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment (Fe 290 Gde-E 165)complete all as specified and as directed. 10 Supply & fixing mild steel framed work such as grills, gratings, etc with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanksand similar work conforming to Fe 290 Gde-E-165 complete all as specified and directed. 11 Materials and labour for non skid ceramic colouredtiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles with and including 20mm thick screed bed or bedding layer of cement morter (1:6) for laying of floor finishes complete all as specified and directed. 12 Materials and labour for coloured 450x350x7-8 mm thick glazed ceramic tileson vertical surfaces such as skirting,dado and risers to steps etc, set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match, over and including 10mm thickbacking coat in cement mortar (1:3) , complete all as specified and directed. 13 Materials and labour for 20mm thick granite slabs of any type (table rubbed and polished) on cooking platforms and like, set and jointed in net cement slurry and pointed in white cement (1:2) using marble dust with admixture of pigment to match shade of granite including necessary moulding at edges laid over and including 10mm thick cement mortor screed bed in cement mortor (1:3) complete all as specified and directed. 14 Supply and fixing Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing, complete all as specified and directed. 15 Supply and fixing factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification and drawing, complete all as specified and directed. 16 Supply and fixing factory Made Solid PVC moulded door shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site, with particle board core as per specification & drawing complete all as specified and directed. 17 Supply and fixing 105 x 60 mm pressed steel frames for doors with one or more rebates including necessary fixing lugs, hings lock strike plate etc. complete all as specified and directed. 18 Supply and fixing 125 x 60 mm pressed steel frames for doors with one or more rebates including necessary fixing lugs, hings lock strike plate etc. complete all as specified and directed. 19 Supply and fixing flush door shutters 30mm thicksolid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed. 20 Supply and fixing 35mm thick second class class hard woodglazed and skelton shutter, open rebated and prepared to receive glass gauze etc, divided into squares (with sash bar), edges of framing plain, chamfered or rounded,fitted with cut and mitred beads for securing glass exc., size of members of shutter as specified in SSR part-I, sec 8 clause 8.24(a), supplied and fitted to chowkats, complete all as specified and directed. 21 Materials and labour for 19mm thick plywood grade BWR, type BBfixed with screws to timber frame work as in cabinet/cup board ,fix with brass screws and cups complete all as specified and directed. 22 Extra over rates of 18/19mm thick plywood forexternal teak wood lipping, 6mm thick fixed with nails complete all as specified and directed. 23 Materials and labour for 0.9 mm thick Decorative laminate type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer instructions complete all as specified and directed.Make:- Green ply industries Ltd/ Century/ Archid. 24 Materials and labour for 1 mm thick Decorative laminate type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer instructions. Make:- Green ply industries Ltd/ Century/ Archid. 25 Materials and labour for 1.5 mm thick Decorative laminate type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer instructions. Make:- Green ply industries Ltd/ Century/ Archid. 26 Materials and labour for 2nd class hard wood plain, fillets. square, rectangular or triangular in section, wrought, secured with nails or brads of sectional area exc 3 sqcm and not exc 6 sqcmcomplete all as specified and directed. . 27 Supply and fixing 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification complete all as specified and directed. 28 Supply and fixing Solid PVC wall lining/Board consisting of 5mm thick single side prelaminated PVC sheet and inclusive of solvent cement and fixing at site on PVC frame complete including taking down of old wall lining of any type complete all as specified and directed. 29 Supply and fixing Cubical of size 0.60x0.60x0.675 mtrs (minimum) madeout from 19 mm thick plywood grade BWR including front facia PVC laminated, with wall supported at back, ply on three sides, resting below cooking platform. The cubical shall have three baskets (cutlery, cup saucer and thali) made out of stainless steel of grade 304 fixed with telescopic drawer channels and accessories. The internal surface shall be laminated with white colour complete all as specified and as directed. 30 Supply and fixing Cubical of size 0.60x0.60x0.675 mtrs (minimum) made out from 19 mm thick plywood grade BWR including outer side PVC laminated, with wall supported on three sides, resting below cooking platform. The cubical shall have three baskets (cutlery, cup saucer and thali) made out of stainless steel of grade 304 fixed with telescopic drawer channels and accessories. The internal surface shall be laminated with white colour complete all as specified and as directed. 31 Supply and fixing mobility pantry pull out units of 12 baskets alloy steel storage system of size 450mm x 560mm x 1850- 2080mm or more complete all as specified and as directed. 32 Supply and fixing Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor, 150 mm size , complete all as specified and directed. 33 Supply and fixing Aluminium anodized barrel tower bolts of extruded section, 200 mm long, complete all as specified and directed. 34 Supply and fixing Aluminium anodized barrel tower bolts of extruded section, 150 mm long, complete all as specified and directed. 35 Supply and fixing Aluminium anodized barrel tower bolts of extruded section, 125 mm long, complete all as specified and directed. 36 Supply and fixing for 300mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, complete all as specified and directed. 37 Supply and fixing stainless steel butt hinges, Medium grade, 100 mm size , complete all as specified and directed. 38 Supply and fixing stainless steel decorative type door handle for cupboard of approved make complete as specified and directed. 39 Supply and fixingaluminium anodisedbow handles of 150mm size, fabricated type of extruded section fixed with screws to shutters, complete all as specified and directed. 40 Supply and fixingaluminium anodisedbow handles of 125mm size, fabricated type of extruded section fixed with screws to shutters, complete all as specified and directed. 41 Supply and fixing in repair continuous (Piano) hinges mild steel bright finish or electro galvanised, width of flaps when open 30mm complete as specified and directed. 42 Supply and fixing aluminium anodised profile handle no protruding type and shall match the surface of cubical, complete all as specified and directed. 43 Supply and fixing CP curtain rails 25 mm dia chromium plated, with and including fixing brackets, stops, rollers etc, complete al as specified and directed. 44 Supply and fixingKitchen cabinet hinges 2 hole full over lay complete as specified and directed. Make: Godrej/ Hettich/ Linc 45 Supply and fixingdoor magnet for cupboard/wardrobecomplete as specified and directed. Make: Godrej/ Hettich/ Linc 46 Supply and fixing ball bearing slide systems/Drawer/Telescopic Channel Set (8 -400 mmcomplete as specified and directed. Make: Godrej/ Hettich/ Linc 47 Supply and fixingin repairs Aluminium (Extruded section body) Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and as directed. 48 Supply and fixing Steel ventilator with top hung shutter including hinges, steel peg stay, incl taking down including providing one shop coat of zinc chrome primer complete all as specified and as directed. 49 Supply and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) frame for doors, windows, ventilators and partitions with one or morerebates including joining cleat for fixing etc. complete all as specified and as directed. 50 Materials and labour for providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providingand fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming toIS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws. complete all as specified and directed 51 Supply and fixing in repair anodised slider 3 track aluminium windows incl frame fixed type without sash bars, with aprropriate aluminium section including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws ,screws handles 2 nos, and 5 mm thick sheet glass plain or tinted including removing old unserviceable steel shutters complete all as specified 52 Supply and fixing Anodised aluminum grill (anodised tansparent or dyed to required shade according to IS : 1868 with minimum anodic coating of grade AC 15) of approved design/pattern., with approved standard section and fixed to the existing window frame with C.P brass/stainless steel screws @ 200 mm centre to centre, including cuttingthe grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and derection of Engineer-in-charge. 53 Materials and labour for rendering 15mm thickin cement morter (1:6) on other than fair faces of brick work or concrete surfaces, finished even and smoothwithout using extra cement, complete all as specified and directed. 54 Materials and labour for rendering 15mm thickin cement morter (1:4) on fair faces of brick work or concrete surfaces, finished even and smoothwithout using extra cement, complete all as specified and directed. 55 Materials and labour for preparation of new plastered surfaces of walls and applying two coats of oil bound distemper of approved colour with roller over one coat of primer over 2 mm thick wall care putty of approved make completeall as specified and directed. 56 Materials and labour for preparation of new plastered surfaces of walls and applyingtwo coats of antifungal exterior emulsion paint(as per manufacturer instructions) over a coat of damo proof primer on wall complete all specified and directed. 57 Materials and labour for preparation old decorated surfaces of ceiling including brooming down or steel wire brushing scraping down smoke shoot, moulds, moss and efflorescent salt sand trading oil and greasy spots and applying one coat of white washcomplete all as specified and directed. 58 Materials and labour for for preparation of old decorated surfaces of walls including brooming down or steel wire brushing scraping down smoke shoot, moulds, moss and efflorescent salt sand trading oil and greasy spots and applying one coat of antifungal exterior emulsion paint(as per manufacturer instructions) complete as specified and directed. 59 Supply and fixing in repairAluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples complete all as specified and directed. 60 Supply and fixing galvanised steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanised steel wire staplescomplete all as specified and directed. 61 Supply and fixing 4 mm thick sheet glass, ordinary quality and glazing with oil putty in squaresnot exceeding 0.50sqm in each pane , complete all as specified and directed. 62 Hackingoutoldbrokenglass (any thickness, size, quality or description)from aluminium door/window shuttersandsupply and fixing new 5 mm thick sheet glass, ordinary quality including necessary fixing arrangement, complete all as specified and directed. 63 Materials and labour for preparing of new steel surfaces of any description , over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified and directed. 64 Materials and labour for preparing of old painted steel surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. 65 Materials and labour for preparation of newuntreated wood and wood base material of any description not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed. 66 Materials and labour for preparation of oldpainted wood and wood base material of any description not otherwise described, over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.
