Tender For Additional / Alternator To Building No P-23At Basoli Under Ge Basoli.; 1 Excavation in trenches n exc 1.5 m wide and n.exc 1.5 m in depth for foundation of pole/stay and laying of UG cable/GI pipe etc and getting out in any type of soil complete all as specified and directed. 2 M&L returning, filling and including spreading, levelling, watering and well ramming in layers not exceeding 25 cm complete all as specified anddirected. 3 Removing excavated material nexc 50m and depositing where directed at a level nexc 1.5mtr above the starting point , complete all as specified anddirected. 4 Surface excavation not exc 30cm deep and averaging 15cm deep and gettingout in any type of soil complete all as specified anddirected. 5 M&LReinforced cement concrete M-20 (Nominal mix) using 20mm graded crushed stone aggregates as in slabs, supported on walls, beam and columns in floors and in shelves and the like complete all as specified and directed. 6 Steel Form work to soffits of suspended slabs such as roof slabs, floor slabs etc not exceeding 200mm thick complete all as specified and directed. 7 Steel Form work toedges of concrete flats, treads, break in floors, window cills, concrete railings, openings in concrete walls, floor and roof and not exc. 20cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar workexc. 10cm but n.exc. 20cm wide for fair finished surfaces of concretecomplete all as specified and directed. 8 M&L TMT bars 10mm dia and over,cut to length, bent to shape required, including cranking, bending spirally forhooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. 9 Taking down chowkats or frames with shutter (without taking off shutter from the frames) n. exc 1.50 Sqm each complete all as specified and directed . 10 Taking down chowkats or frames with shutter (without taking off shutter from the frames) exc. 1.50 Sqm n.exc 4 Sqm each complete all as specified and directed. 11 S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65 x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/Sqmm, modules of elasticity 900 N/Sqmm and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). 12 S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65 x 125 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/Sqmm, modules of elasticity 900 N/Sqmm and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). 13 S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/Sqmm, modules of elasticity 900 N/Sqmm and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). 14 S&F Factory made singleextruded WPC (Wood Polymer Composite)solid plain flush door shutter decorative type, of 35 mm size comprising of virgin polymer of K value 58-60 ,calcium carbonate and natural fibre and non toxic additivesminimum compressive strenth 50 N/ sqmm ,modulas of elasticity 850 n/ mm2 and resistance to spred of flame of Class A cateegory with property of being termite /borer proof ,water /moisture proof and fire retardant . WPC to be Laminated with PVC foil of minimum 14 microns thick of approval design pasted with hot melt adhesive on both faces of shutter and fixing with stainless butt hinges of required size with neccessary full body threated star headed counter sunk s.s screw shall ,all as per direction of enginner In charge. 15 S&F Factory made singleextruded WPC (Wood Polymer Composite)solid plain flush door shutter decorative type, of 30 mm size comprising of virgin polymer of K value 58-60 ,calcium carbonate and natural fibre and non toxic additivesminimum compressive strenth 50 N/ sqmm ,modulas of elasticity 850 n/ mm2 and resistance to spred of flame of Class A cateegory with property of being termite /borer proof ,water /moisture proof and fire retardant . WPC to be Laminated with PVC foil of minimum 14 microns thick of approval design pasted with hot melt adhesive on both faces of shutter and fixing with stainless butt hinges of required size with neccessary full body threated star headed counter sunk s.s screw shall ,all as per direction of enginner In charge. 16 S&FFactory made fully glazed/wire gauge (single piece Both side) PVC prelam door shutter 35 mm thick (style) consisting of frame made out of mild steel tubes of size 19mm x 19 mm (19 gauge) for top and bottom rails and 19mm x 19 mm (19 gauge) in styles. Single Pieces plain coloured PVC sheets 5mm thick to be used to cover styles and rails PVC sheet strip of 20 mm width stuck inside with styles solvent cement for stiles & plain coloured PVC sheets for top rail, lock rail and bottom rail on either side side and as gap insert for top rail and bottom rail. Panel will be wire gauges and dtighten tig firmly and fitted as per manufactures instructions including Stainless steel wire cloth, 0.25 mm to 0.36mm nominal dia of wire & average width of aperture 1.40mm to to 2mm and Aluminum XPM in rhombus shape, in one Piece from top rail to bottom rail taking down with existing one all as specified and directed . NOTE: All screws shall be self tapping chromium plated 17 Prelaminated HDHMR board 19 mm thick as in shutters/shelves (exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws (min weight 8 Kg/SQM) complete all asspecified anddirected. 18 M&L For Polycarbonate Acrylic sheet 2.5 mm thick of any colour/shade as in roof covering /clading to wall fixed with self taping screw complete all as specified anddirected.(Sample as approved & Kept in GEs sample room) 19 S & F Cloth Dryer of Stainless Steel as mounted to Roof/Ceiling with Pulley Operated mechanism for Drying Rack/Cloth Dryer/Clothes Hanger as in Balcony/Passage/Bathroom with min 6 Pipes of 8 Feet long each, complete including fastening bolts etc complete all as specified anddirected. (Sample as approved & Kept in GEs sample room) 20 S & F Aluminium (anodised) fixed type powder coated window fabricated from standard aluminium box sections all as specified and directedand comprising of the following :-a) Chowkhat / frame 100 x 44 x 1.5 mm thickb) Top, middle & bottom rail and styles100x44x1.5 mm thick.c) Each Fixed Panel of area not exc 1.20 Sqmd) Panel of 4.8 to 5.0 mm thick heat observing glass pane (Make-Saint Gobain/Modi float glass/ Hindustan Pilkington glass works) fixed with standard aluminium beading and rubber gaskets.e) The Rate should be incl of Fasterner and Taking Down Old window/ RCC Jalli.Note : All fittings are powder coated. 21 S&F 100 mm long Butt hinges, medium weight, cold rolled mild steel, and fixed complete all as specified and directed. 22 S&F For MS 300mm ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed. 23 S&F for Stainless steel barrel tower bolt, 150 mm size complete all as specified and directed. 24 S&F for Stainless steel handle, cast type, 150 mm size complete all as specified and directed. 25 S&FStainless steel,sliding door with hasp and size 300mm long with hasp, staples and fixing clips of sheet extruded section and fixing bolts of extruded section complete all as specified and directed. 26 S&F continous (piano) hinges mild steel, 40mm width of flaps (when open) ,bright finish or electrogalvanised complete all as specified and directed. 27 S&F 100mm long stainless steel fancy typehandle for kitchen cupboad/ cabinet and the like complete all as specified anddirected 28 S&F magnetic catchers for cupboard like complete all as specified anddirected 29 Supply & fixing 100mm hasp and staple aluminium anodised, including bolt to hinge plate and fixed with screws, complete all as specified anddirected. 30 S&F stainless steel 6 pin/hook set for cloth hanging fixed to wall with nails complete all as specified and directed. 31 Providing & fixing Windows/ ventilators fabricated from roll framed sections made of galvanized steel colour coated/ powder coated (Base steel as per IS 513 “D” quality galvanized as per IS 277 with zinc of 120 gms/Sqr. Mtr.) with total coated thickness of 0.60mm incl painting, with Frame section 72mm x 55mm, Mullion section 72mm x 50mm, Shutter Frame 47mm x 20mm, incl 5mm plain/figured float glass and wire mesh,handle, lock and other accessories with powder coated guard bars Grill of size 10mm sq. MS Bars and 6mm x 12mmMS flat fixed using fasteners etc complete all as specified and as directed. Make:ECO – 4000 Series Windows (Double Rebate) NCL Windoors, Tata, JSW or its equivalent. 32 M&L for preparation of new steel surfaces of any description over 10cm width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed . 33 M&L for preparation of old steel surfaces of any description over 10cm width or girth not otherwise described and applying one coat of synthetic enamel paint complete all as specified and directed . 34 Materialand labour for plain cement concretetypeB-1 1:2:4 (20mm graded stone aggregate) as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses,lacing courses, parapets and railings upto 60 cm in height,copings, kneelers, apex stones, bed plates, kerbs ,water troughs and the like including weathering, slightly rounded or chamfered angles andthroating, complete all as specified and directed. 35 M&L for roof treatment with the following specification - Removing existing water proofing treatment , roof padding/PCC and applying water proofing treatment on horizontal or vertical surfaces by applying oil bound bitumen primer @ 0.20 Kg/sqm and providing 3mm thick APP modified water proofing membrane weighing not less than 3 Kg/sqm reinforced with non-woven polyester matt weighing not less than 160 gm/sqm, The overlap shall be minimum 100mm on transverse direction and 75 mm on longitudinal direction and sealing overlap by torch application and bonded and applying a coat of blown grade hot bitumen 85/25 over and below the membrane @ 1.20 Kg/sqm in drying over the membrane finished with solar reflective bituminous aluminium paint/ primer @ 0.10 Kg/sqm over RCC roof slab/ parapet after cleaning the surfaces by removing dust, dirt etc. as per manufacturer’s instructions including 20 mm thick screed in CM 1:4and all as specified and as directed. NOTE :- MOU to be submitted by the contractor beore starting of work with the authorised applicator by the OEM of APP membrane duly recommended by Engineer-in-charge 36 M&L forcement concrete 1:2:4 type B-0 (using 12.5 mm graded crushed stone aggregate), top surface of plain concrete padding shall be finished even & fair w/o using extra cement complete all as specified and directed. 37 S&F Framed work such as grills,gratings etc, with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks, framework for roof chajjas including welding works if so required and similar work conforming to Fe.290.Gde-E-165 , complete all as specified and directed. 38 S&F in repair 25mm outer dia stainless steel decorative drapery rod of thickness 20 gauge and for every 01 RM length, with stainless steel brackets near to ends with stainless steel finialsfor 25mm dia drapery rod at both ends. The drapery rod shall be projecting 150 mm outer side from the clear opening of doors/windows. ( Including necessary fittings) complete all as specified and directed. 39 Demolition cement concrete unreinforced in ground floor or paving not exc 15cm thick complete all as specified and directed. 40 Demolition of Concrete (reinforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed. 41 M&L for 100 mm thick PCC type C-2, 1:3:6 (40mm graded crushed stone aggregate) as in sub base complete all as specified and directed . 42 M&L for 25 mm thick PCC type B-0, 1:2:4 (using 12.50mm graded crushed stone aggregate) as in sub base of floor complete all as specified and directed . 43 M&L for 25 mm thick PCC type B-0, 1:2:4 (using 12.50mm graded crushed stone aggregate) as in flooring, finished top surface even and smooth without using extra cement complete all as specified and directed . 44 M&L machine pressed precast concrete coloured interlocking paver block any shape and size confirming to IS-15658-2006 of 60 mm thickness, M-35 grade with grey cement and pigment over and including 50mm thick layer of sand filling complete all as specified and directed. 45 M&L for PCC 1:5:10 type E-2 (using 40 mm graged crushed stone aggregate) as in foundation filling and mass concrete (sunken floors etc) complete all as specified and directed. 46 M&L for (a)Rendering 15mm thick plaster in cement sand mortar (1:4) mixed with water proofing compound (confirm to IS-2645-Specification for integral cement water proofing compound) as approved as per manufacturer instruction, shall be applied both onfloor and side walls. The surface shall be cured and allowed to dry, all the joints of pipe shall be sealed properly as per instruction of agency who is carying out water proofing treatment.(b) Apply a layer ofAPP modifeid membraneover a coat ofoil bound bitumen primer @ 0.30 liter/Sqmon floor as well as on side wall as per manufacturers instruction of make/Manufacurer as in spcified in Zonal Specification Part-II, After the treatment is over ,sunkun portion shall be kept full of water for atleast one week to check that no seepage is seen from the external surfaces completeall as specified and directed. 47 M&L for 10mm thick rendering/screeding on fair faces of brick/concrete surfaces in cement mortar 1:4 and finished even and fair for receiving tiles complete all as specified and directed. 48 Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. 49 M&L Glazed ceramic tiles in vertical surface 350x250mmx7mm/450X300X7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface complete all as specified and directed. 50 M&L for Non - skid DigitalCeramicjoint lesscoloured tiles 7 to 8mm thick (Square/reactangular) area of each tiles exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match Screed bed or bedding layer of mortar 15 mm thick in CM 1:4complete all as specified anddirected . 51 M&L 18 to 20mm thick Granite (of any type)work (table rubbed and polished) in steps ( tread/ riser) in single piece , jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, over 15 mm thick CM 1:4 complete all as specified and directed. 52 M&L for 18-20 mm thick Granite (of any type) tiles machine cut, in skirting/ dado laid over cement screed and jointed with grey cement slurry, and pointed with white cement with admixture of pigment to match the shade of granite stone including 10 mm thick rendering 1:4, grinding and polishing complete all as specified and directed. 53 Rounding/mouldingto edges of stone slabs, marble stone, granite stone slabs one edge, such as in steps, cooding platform and other similar situations etc complete all as specified and directed. 54 M&L for rendering 10mm thick in cement mortar 1:6, on fair faces of brick work or concrete surfaces , finished even and smooth without using extra cement, preparation of new plasteredsurfaces of walls and applying 1mm thick wall care putty andtwo coat oil emulsion distemperon walls complete all as specified and directed . 55 Preparation of old decorated brick/concrete/plastered/ unplastered surfaces of walls, Pillars, cornices etcby booming down with steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts, trading oil and greasy spots, rubbing with sand paper and applying one coat of oil bound distemper onwalls, pillars,cornices surface including making good uneven surface/holes and smoothening of surface with birla wall care putty coloured in same shade where ever required etc. complete all as specified and directed. 56 S&F of 15mm dia bore steel water GI tubes medium grade with all fittings and fixed cocealed to walls, ceilings or laid in floors complete with and including taking up or down 15mm bore steel water tubing and connections including cutting/chiesling of brick/concrete surface and making good as per existing complete all as specified and directed 57 Refixing onlyof 15mm dia bore steel water GI tubes medium grade with all new fittings and fixed cocealed to walls, ceilings or laid in floors complete with and including taking up or down 15mm bore steel water tubing and connections including cutting/chiesling of brick/concrete surface and making good as per existing complete all as specified and directed 58 S&F of 20mm dia bore steel water GI tubes medium grade with all fittings and fixed cocealed to walls, ceilings or laid in floors complete with and including taking up or down 20mm bore steel water tubing and connections including cutting/chiesling of brick/concrete surface and making good as per existingcomplete all as specified and directed 59 Refixing onlyof 20mm dia bore steel water GI tubes medium grade with all new fittings and fixed cocealed to walls, ceilings or laid in floors complete with and including taking up or down 15mm bore steel water tubing and connections including cutting/chiesling of brick/concrete surface and making good as per existing complete all as specified and directed 60 S&F of 40mm dia bore steel water GI tubes heavy grade as laid in sunken floorcomplete all as specified and directed 61 Demolition of brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed 62 M&L Brick work with sub class B bricks straight or curved on plan exc 6m mean radius with old size bricks built in cement mortar 1:6complete all as specified and directed 63 All as per item No above, but except brick complete all as specified and directed 64 M&L Brick work with sub class B bricks straight or curved on plan exc 6m mean radius with old size bricks built in cement mortar 1:4complete all as specified and directed 65 M&L brickwork with subclass B bricks, straight or curved on plan to any radius in half brick thick walls built in CM 1:4 complete all as specified and directed 66 S&F in repair 110 mm bore PVC (SWR) Pipes single socketed in any length with rubber ring joints, laid in trenches/floor complete all as specified and directed. 67 S&F in repair 75 mm bore PVC (SWR) Pipes single socketed in any length with rubber ring joints, laid in trenches/floor complete all as specified and directed. 68 S&F in repair 110 mm bore PVC (SWR) Pipes single socketed in any length with rubber ring joints, fixed to wall complete all as specified and directed. 69 S&F in repair 75 mm bore PVC (SWR) Pipes single socketed in any length with rubber ring joints, fixed to wall complete all as specified and directed. 70 S&FPVC (SWR) Bends in any radius 75 mm bore in repair complete all as specified and directed. 71 S&FPVC (SWR) Bends in any radius 110 mm bore in repair complete all as specified and directed. 72 S&FPVC (SWR) Bends with access door in any radius 75 mm bore in repair complete all as specified and directed. 73 S&F in repairs for 75mm bore PVC (SWR) floor trap plain with grating including jointing with solvent cement complete all as specified and directed. 74 S&F in repairs for 75mm bore PVC (SWR) P- trapincluding jointing with solvent cement complete all as specified and directed. 75 S&F in repairs PVC (SWR) junction single (single T) equal or unequal with access door, 75mm complete all as specified and directed. 76 S&F in repairs PVC (SWR) junction single (single T) equal or unequal, 75mm complete all as specified and directed. 77 S&F in repairs PVC (SWR) junction single (single T) equal or unequal, 110mm complete all as specified and directed. 78 S&F PVC (SWR) reducer 110mm bore complete all as specified and directed. 79 S&F PVC (SWR) Vent cowl 75 mm bore in repair..complete all as specified and directed. 80 S&F in repair/newPVC connection 15mm size with PTMT nuts of length 450mm complete all as specified and directed. 81 S&F in repair/newPVC connection 15mm size with PTMT nuts of length 600mm complete all as specified and directed. 82 M&L for Rotational moulded polyethylenewater storage tank 3 layer white colour water tank, non- toxic effect, algea formation protection (made from Virgin grade of polyetylene material which is duly stablized with anti-oxidentPlastic) of capacity 1000 litres, (cylindrical vertical tanks with closed top,specific wt shall be 25 gm/ltr), the internal and external surfaces of tanks are smooth, clean and free from any hidden internal defects, hoisted and fixed in position including S & F necessary GI fittings, inlet/outlet washout, overflow pieces long nipples, checknuts & washer, 20 mm dia PTMT valves high pressure of PTMT with epoxy coated Aluminum rod & high-density plastic balland 20 mm brass stop cock etc including taking down existing tank complete all as specified and directed. 83 S&F in repair 20 mm size gun metal globe or gate valves with iron wheel head, screwed both endsfor iron pipe and fixedcast copper chromium plated fancy type alloy ISI marked with crutch or butter fly handles screwed down screwed for iron pipe of 20mm bore. complete all as specified and directed. 84 S&F in repair 15mm bore chromium platedcast copper alloy bib taps fancy type long body with crutch or butterfly handlescrewed down screwed for iron pipe or for brass ferrule all complete all as specified and directed. 85 S&F in repair 15mm bore angle valve with wall flange , cast copper alloy, chromium plated fancy type screwedfor 15 mm iron pipe, complete all as specified and directed. 86 S&F in repair 15mm bore angle valve with long shank and cup (concealed type) cast copper alloy, chromium plated fancy type screwedfor 15 mm iron pipe, complete all as specified and directed. 87 S&F Central Hole Basin Mixer without Popup Waste System with 450mm Long Braided Hoses Also available, complete all as specified and directed. 88 S&F for 750mm x 1800mm x 5mm thick frame less beveled plain mirror for dressing , bathroom,living room and entrancefixed with chromium plated brass screws and cup washers on wall complete all as specified and directed . 89 S&F in repair under counter basin white colour with fixing accessories set, size: 560 x 470x190, Oval shape, including CPWaste Coupling and PVC waste pipe complete all as specified and directed. 90 S&F in repair, Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe )with CI ‘P’ or ‘S’ trap including plastic seat cover , white, closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging device and jet spray complete all as specified and directed 91 S & F for vitreous China squatting pan, ‘Orissa’pattern, size 580 x 440 mm white, with integral foot rests including provision of lime concrete bedding (excluding flushing cistern and flush pipe complete all as specified anddirected. 92 S&F Vitreous China urinals,(back or corner wall type) half stall, urinal divider complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; and urinal spreader with Self closing angle cock pressmatic for urinal with wall flange and 200 mm connecting pipe with brackets, flush pipe, grating and Union for discharge pipe. waste coupling and waste pipe of 32 mm dia (Exclusive of fixing supply pipe to self closing angle cock, trap and waste pipe Complete all as specified and directed. 93 S&F in repair PVC valveless,syphonic action type, flushing cistern, low level, white with inlet, ball valve, float and handle including brackets, PVC 32 mm L bend of capacity 10.0 litres and making good to dismantled/damaged floor/surfaces, fixing in repair, complete all as specified anddirected 94 S&F in repair Fancy type health faucet with 8mm dia 1mtr long flexible tube(back flow preventer),chromium plated of 15mm bore, complete all as specified and directed. 95 S&F in repair Stainless steel fancy type soap dish complete all as specified and directed. 96 S&F in repair chromium plated shower roses with or without swivel joints 125mm size including fixing to steel pipe or union complete all as specified and directed. 97 S & F in repairPVC shelves of PTMT fixed with and including chromium plated brass screws and plastic cleats. complete all as specified anddirected. 98 S&F in repair brass chromium plated tubular towel rails 20mm dia D type 60cm long betweenflanges complete all as specified and directed. 99 Taking down cement plaster on brick or concrete surface including racking out joints hacking for key scrubbing down with water etc. complete all as specified and directed. 100 Taking down ,dismantling of broken/loose portion of chajja ,facia upto 450 mm wide and making good the surfaces with cement mortar 1:3 or PCC 1:1.5:3 including necessary formwork /scffolding and matching with existing surface of facia (excluding white wash /colour wash or cement base paint )chajja upto 2nd floor .complete all as specified and directed. 101 M&L for Rendering 5mm thick in cement mortar 1:3 on ceiling fair faces of brick work or conrete surfaces finishing the surface even and smooth without using extra cement complete all as specified and directed 102 M&L Rendering 15mm thick cement plaster on fair faces of brick work or concrete surfaces in cement mortar (1:4) in two layers (5mm finishing layer over 10mm base layer) finished even and smooth without using extra cement with WPC over finishing layer complete all as specified and directed (Note WPC shall be measured and paid seperately) 103 M&L Cement concrete type C-1, 1:3:6 (using 20mm graded aggregate) as in plinth protection and paving 75mm thick laid in slope finished even and fair incl making joints at every 2.5 m and at corner filled with bitumen 85/25 and sand in ratio 1:2 by weight and complete all as specified and directed. 104 Preparation of new plastered surfaces of walls, chajjas, fascia, face of columns, beams etc. andapplyingtwo coat of weather proof exterior emulsion paint (APEX) of Alkali & fungal resistance,dirt resistance qualities in same shade and color as approved over a coat of primer using smart periodical techniques etc (up to 2nd storey with necessary scaffolding) complete all as specified and directed. 105 Complete removal of existing treatment including washing, rubbing down with sand paper and stopping ofpainted surfaces including preparation of old plastered surfaces of walls, chajjas, fascia, face of columns, beams etc. andapplyingtwo coat of weather proof exterior emulsion (APEX) of Alkali & fungal resistance,dirt resistance qualities, after making good uneven surface/holes with Birla wall care putty coloured in same shade where ever required using smart periodical techniques etc (up to 2nd storey with necessary scaffolding) complete all as specified and directed. 106 M&L forpreperation of new plastered surfaceand applying three coats of white wash on ceilingcomplete all as specified and directed 107 M&L forpreperation of old plastered surfaceand applying two coats of white wash on ceilingcomplete all as specified and directed 108 Supply only integral Water Proofing Compound. complete all as specified and directed 109 M&L for Pre cast cement concrete B-1, 1:2:4 (using 20 mm graded crushed stone aggregate) as in landings, cover slabs, (for manholes etc.) chullah hoods, chajjas, water trough, mangers, shelves and similar articles with plain faces.complete all as specified and directed. 110 Dismantling of PVC (SWR)/ CI/ Concrete Pipes, drain pipes any type,drain pipes including concrete bed, internal dia of pipe 200 mm, and taking out from trenches, if required,Complete all as specified and directed 111 M&L for concrete bed to drain pipes laid in trenches incl packing under and haunching against the sides of pipes after they are laid and tested in cement concrete 1:3:6 type C-2 (using 40mm graded crushed stone aggregates) for 200mm bore of pipe complete all as specified and directed 112 M&L for Reinforced concrete pipes 200mm, class NP3, laid and jointed complete with collarsbed complete incl testing all as specified (Concrete to be measured and paid for separately) complete all as specified and directed 113 M & LCutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required complete all as specified and directed 114 S&F of 25mm dia bore steel water GI tubes medium grade with all fittings and fixed cocealed to walls, ceilings or laid in trenches including taking down existing pipecomplete all as specified and directed. 115 Suppy and fix gate valve 25mm dia gun metal gate valve conforming to IS with iron wheel head screwed both ends for iron pipecomplete all as specified anddirected. 116 Supply and layingfor XLPE insulated, armoured, heavy duty electric cable with aluminum conductor, 1100 Volts grade,of size 50 Sqmm, 3.5 corecomplete all as specified and directed by Engr-in-Charge .Note : Earth work including excavation, returning filling , removing, sand cushioning, GI pipe,brick covering for mechanical protection of cable etc will be measured and paid for separately under respective items of schedule. 117 Supply & laying of approved quality sand under cable upto 15cm before laying the cable and 8cm over the cable after laying, punned down to overall thickness of 18cm in trenches for cable cushioning complete all as specified and directed.(Punned thickness shall be measured) 118 Material and labourforwell burnt, old size Sub ClassBbrickcovering protectionto the eletric cablelaiddry flat transversallyalongthe lengthof cable with widthequal to lengthof brickcomplete all as specified and directed . 119 Supply and laying in trenches/under roads/under floor/on walls innew position tubing GI Light grade of 50 mm nominal bore of pipe with screwed sockets joints (such as bends, elbow, tees, etc) complete all as specified and directed. 120 Taking down copper/aluminum point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc. complete all as per specified and directed. 121 Point wiring with 1.5 Sqmm FRLS, PVC insulated andunsheathed multi stranded flexible copper conductor cable inand incl rigid PVC conduitconcealed medium grade with pressed mild steel terminal boxes(sheet not less than 1.6 mm thick) duly painted with a coat of red oxide primerwith suitable thickness plastic laminated sheet cover 3mm thickofadequate size for one light or one fancontrolledby one switch incl 1.5 Sqmm FRLS, PVC insulated andunsheathed multi stranded flexible copper conductor cable as earth wire(green colour) to common earth dolly complete all as specified and directed by Engr-in-charge.Note: a) Rate for cutting chases for conduits and sinking for boxes and making good to wall, floors deemed to be included in each point etc (b) On RCC roof ceiling PVC conduit shall be provided on surfaces for any necessary point with proper fixing clips and no extra cost shall be paid for the job etccomplete all as per specified and directed. (c) colour coding is to be maintained. (Ph-Red, N-Block, Half-yellow, Earth-Green). 122 All as per srl item No 121 above but controlled by two 2-way switches, with cables 1.5 sq. mm size complete all as specified and directed. 123 All as per item No 121 but for one 3 pin 5 Amp socket outlet on independent board complete all as per specified and directed. 124 All as per item No 121 but for one 3 pin 5 Amp socket outlet on same board complete all as per specified and directed. 125 Point wiring with 2.5 sqmm FRLS, PVC insulated andunsheathed multi strandedflexible copper conductor cable drawn in and including rigid PVC concealed conduit medium grade of suitable size with sunk cast iron/pressed steel terminal boxes(sheet not less than 1.6mm thick) of adequate size with suitable thickness plastic laminated sheet cover 3mm thick for one 3 pin socket outlet 15 Amp on independent board including continuous 2.5 sqmm FRLS, PVC insulated and unsheathed copper conductor cable(multistranded)as earth wire to common earth dolly, complete all as per specified and directed. 126 S & F for switch piano flush type one way 5 amps SP complete all as specified and directed.Make: Havells (REO) or technocommerically equivalent make ofcona/SSK. 127 S & F for switch piano flush type two way 15 amps SP complete all as specified and directed.Make: Havells (REO) or technocommerically equivalent make ofcona/SSK. 128 S & F for switch piano flush type one way 15 amps SP complete all as specified and directed.Make: Havells (REO) or technocommerically equivalent make ofcona/SSK. 129 S & F socket outlet3 pin 5 amps flush type complete all as specified and directed. Make: Havells (REO) or technocommerically equivalent make of cona /SSK. 130 Supplying &Fixing socket out let, 6 pin, 5 and 15 amps multi purpose 2 in 1 flush type, 230 volts, complete all as specified and directed Make: Havells (REO) or technocommerically equivalent make of cona /SSK. 131 S&FLampholder, PVC/Polycarbonate type with bakelite back plate having matching colour to holder suitable for angle/batten fittings complete all as per specified and directed. 132 S&F ceiling rose surface 65x50mm three terminal with bakelite back plate complete all as specified and directed. 133 S & F stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc. as reqd complete all as specified and directed. 134 Supply and fixing LED light fitting mirror type Surface mounting General Purpose LED Battens in Extruded Aluminium housing with suite variety of application areas with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete of Make : Havells, cat part no: LUMILINEPLUSBS10WLED865SPCSSIND/ Crompton, cat part no : TCS-108-10-65-SL-DP-NWH/of make Orient, cat part no: LBLN-10-C-SQ complete all as specified and directed. 135 Supply and fixing LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose of make : Philips, cat part No :BN170C LED20S-6500 PSU L120 / Havells, Cat part no: LUMILINEPLUSNEOBS20WLED865SPCSSIND/ Crompton, cat part no : CCS-100-20-65-HL2-DP-NWH/ Orient, cat part no :LBLN-20-C-SQ-AL complete all as specified and directed 136 S&F of LED Bldg security lights of 35 Watt, 230 V having pressure die cast aluminium housing with system lumens efficacy≥100 lumen/W IP65 protection, IK07 rating, inbuilt electronic driver with PF>0.95 incl Gl bracket of suitable dia bend to shape and fixed to wall by means of clamps or nuts bolts and connecting up with three core twisted flexible copper conductor cable. Make of street light fitting- Bajaj, cat part no :ENXT P 35L WH PO PC SD/Havells, cat part no: ENDURASUNDOWNSL35WLED765PASYBOPC/ Wipro, cat part no:LR08-501-XXX-57-XX/Crompton, cat part no:TRP-400-35-57-SL-LM-NSR including taking out old/unsv securtiy light any type and rating complete all as specified and directed. 137 M & L for providing/cutting the round /square hole on the wall and supply and fixing propeller type AC ventilating fans(Metalic body ) Single phase , 230 volts 300 mm sweep includinggrouting and fixing the ragged bolts in wall for exhaust fan and louver shutter on the exhaust side wall(outer surface of the wall ) and connectingPVC insulated three core 1.5 SQMMcopper cablefrom ceiling rose to exhaust fan motor and writing MES No with black synthetic enemelpaint 2.0 cm high Make of Exhaust fan - Havells ,model no : Ventil Air DS Green /Standard, model no :Refresh air - SPS/Khaitan , model No: Eurocap complete all as specified and directed. 138 S & F of sheet metal enclosures distribution boards, double door ,VTPN, 415 volts 4 ways (one incoming three phase & twelve out goings single phase )for MCCB & MCB,s comprising three phase four wire copper strip bus bar of appropriate capacitycomplete all as specified and directed and comprising of the following a) MCCB FOUR POLE 100 AMPS AC415 VOLTS25 KA=01 NO(for incoming )(b) MCB SP 06- 40 amps = 12 Nos (for outgoings) . ( Note :- (i)TheDB shall be VTPN seriesof Make : Schneideror technocommericallyequivalentmake of L&T/ ABB/legrand. (ii) The DB shall be flush fixed and making good the disturbed surface matching with existing specifications shall be part of job at no extra cost.(iii)connection of the MCCBs/ MCBs with cableshall be made through appropriate size pin /bottle type thimble properly crimped.(iv)All the vacant holes of the DB shall be provided with blank plates of appropriate size. (v) Double continuous earth wire shall be provided for each three phase DB from earthing mains dolly. (vi) cutting chasing shall be part of job at no extra cost . 139 M&L for SPN MCB DB 8 way sheet metal enclosures double door 230 V AC, 50 Hz AC with IP 43 and IK 09 rating having fully insulated copper busbar, neautral bar, earth bar and cable ties for cable management including polyuthrene gasket complete fixed flush in wall including cutting chases on wall for taking out old DB and fixing of new DB and making good disturbed surface of wall with cement mortar and finishes to match exisiting surface complete all as specified and directed. 140 S&F MCB SP 6-32 Amps with 10KA breaking capacity of B series in distribution board complete all as per specified and directed. 141 Supply and fixingceiling fans copper wounded complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC)complete all asspecifiedand as directed. 142 Taking down fan, sealing cable end, dismantling blades and removing fan and blades to store in safe custody for repairing/painting and after hanging as per direction complete all as specified and directed. 143 S&F in replacementMCBs single pole and neutral (SPN)/isolator 40 Amps with 10 KA breaking capacity of B series in distribution boards all as specified and directed. 144 S&Fsub main wiring with two run of single core (FRLS) PVC insulated and unsheathed cable with copper conductor (Multi strand) having nominal area4.0 Sqmm drawing into and including PVC non metallic rigid conduit of adequate size and making electric connections including one run (FRLS) PVC insulated single core copper conductor cable 4.0 Sqmm as a earth continuity conductor(green colour) in and including in non metallic rigid PVC conduit, including cutting chases in brick wall, replastering and making good to match the existing specifications complete all as per specified and directed. Note :- (i)Rates are deemed to be included chases of conduit and sinking for boxes cutting and making holes in wall/floor for passing in or through conduit (ii)Two run of4.00 sqmm single core (FRLS) PVC insulated copper conductor cable one run of 4.0 sqmm copper conductor cable (FRLS)as a earth lead and one run of PVC conduit of suitable size will be measured as a one unit. 145 M&L for earthing complete with galvanised steel earth plate eletrode 600mmx600mm and 6mm thick burried directly in ground earth pit not less than 2.25mtr deep below normal ground level with top edges, of the plate not less than 1.5m below normal ground level, connected to the Galvanised Iron earth lead 32mmx6mm (GI Strip) size, by means of bolts, nuts, check buts and washers of galvanised iron and 32mmx6 mm earth lead protected by provision of GI medium grade pipe 40 mm bore including provision of aggregates with 40 mm thick cover of RCC (1:2:4) , reinforced with XPM (weight not less than 4 kg per sqmm) and frame of angle iron 40mmx40mmx3mm and with 6 mm dia MS bar handle made to shape, GI light grade 20mm bore pipe of suitable length for watering perforated at bottom placed on top edged of earth plate, common salt and charcoal filling, funnel, wire mesh and earth work in hard/dense soil, returning filling in distance not exceeding 50 mtr and removal of surplas soil to plate No 3 of SSR 2009 Part-I and connecting to feeder pillers and Transformer all as specified including testing on completion complete all as specified and directed. 146 M&L for Earthing complete with galvanized steel earth plate electrode 600x600x6mm thick buried directly in ground (Earth pit not less than 2.25 Metre deep below ground level) with top edge of the plate not less than 1.5 metre below normal ground level, connected to galvanized earth lead wire 4.0 mm dia by means of bolts, nuts, check nuts and washers of galvanizediron or steel all as shown in electrical plate No.5 of SSR Part-I (2009) including filling of charcoal dust, common salt all around Earth plate upto 150mm, 20mm bore GI medium grade watering pipe, 15 mm bore light grade earth lead protection pipe upto main board, funnel with wiremesh, 40mm thickRCC 1:2:4 type B-1 using 20 mm graded crushed stone aggregate reinforced withsuitable handle and angle iron frameand necessary excavation and earth work in any type of soil etc. complete all asspecifiedand as directed includingtesting on completion. (Note: The rate quoted include cost of min 7.5 metre earthling wire .)
