Tender For Special Repair To Type Iii Qtr Block No P 23 At Cqa Ee Residential Complex Aundh Camp Pune Under Ge Mh And Rh Khadki; 1 Removing old water proofing treatment and cleaning the surface of slab and cleaning with wire brush, removing dust, foreign materials and removing the rubbish off the site to a distance n.exc 100mall as specified anddirected. 2 M&L PCC 1:2:4 type B-0 (using 12.5 mm graded crushed stone aggregate ) on roof top for maintaining of slope coving, benching all as specified anddirected. 3 M&L rendering 10 mm thick on concrete surfaces of roof in cement plaster in 1:3 mixed with WPC @ 3% by weight of cement, finished surfaces even and smooth to receive water proofing treatmentwithout using extra cement all as specified and directed.Note :- WPCshall be measured and paid seperately. 4 M&L for cleaning the plaster /concrete surfaces with wire brushes and applying water proofing treatment, one coat of bituminious primer @ 0.25 kg per sqm and providing 3 mm APP modified water proofing Membrane weight 3.5 to 4.0 kg /sqm by torch applicationmethod including painting entire roof surfaces with one coats of bitumastic aluminous paint all as specified anddirected. 5 Taking up or down steel tubing 20 mm dia and connection including cleaning for refixing for following bore of pipe all as specified anddirected. 6 Taking up or down steel tubing 15 mm dia and connection including cleaning for refixing and removing to store for following bore of pipe all as specified anddirected. 7 M&L for tubes medium grade 20 mm dia, galvanized iron with all fittings fixed complete to wall, ceiling or laid in floors etc. for following dia of pipe all as specified anddirected. 8 Refixing of old steel tubing and connection of 20 mm dia in new or old position (walls, ceiling ,floor all as specified anddirected. 9 M&L tubes medium grade 15 mm dia, galvanized iron with all fittings fixed complete to wall, ceiling or laid in floors for following dia of pipe all as specified anddirected. 10 Refixing of old steel tubing and connection of 15 mm dia in new or old position (walls, ceiling, floor all as specified anddirected. 11 M&L for cutting chases, pinning in brick walls, making good to facing where required and pointing in cementmortar (1:3) and making good, cutting n.exc 10cm girth all as specified anddirected. 12 S&F in repairs, gun metal globe or gate valves 20 mm dia, with iron wheel head, screwed both ends for iron pipes all as specified anddirected. 13 Dismantling water tank of any description or capacity 500 ltrs all as specified as directed. 14 S&F Rotational moulded polyethylene water storage tanks ( cylindercal veritcal with closed top) hoisted and fixed in position 500 ltrs capacityall as specified anddirected. 15 S&F in repairs ball brass valve 20 mm dia high pressure with poly-thine float and fly nut for following bore of pipe all as specified anddirected. 16 Taking down chowkats and frame area n.exc 1.5 Sqm including shutter with out taking off shuttersfrom frame all as specified anddirected. 17 Taking down chowkats and frame area exc 1.5 Sqm and n.exc 4.0 sqmincluding shutter without taking off shutters from frame and removing from site all as specified anddirected. 18 S&F Powder coated Anodised aluminium frame for doors, windows, ventilators with one or more rebates including jointing cleat for fixing all as specified anddirected. 19 S&F powder coated Anodised aluminium window and ventilator shutters, sliding type without sash bars, aluminium sections weighing 0.55 kg/m including necessary jointing cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings all as specified anddirected. 20 S&F powder coated Anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws all as specified anddirected. 21 S&F in repairs framed work such as grills, gratings with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; frame work of water tanks and similar work conforming to Fe 410-0 or Fe 310-0 all as specified anddirected. 22 S&F 5.50mm thick Sheet glass, ordinary quality in square area not exc 0.5 sq.m in each pane all as specified anddirected. 23 S&F 5mm thick Sheet glass, obscured or frostedsquare in area exc 0.5 sq.m in each pane all as specified anddirected. 24 S&F Pressed steel door frame of size 105 x 60mm for doors with one or more rebate including necessary fixing lugs,hinges, lock strike plate all as specified anddirected. 25 S&F Pressed steel door frame of size 125 x 60mm for doors with one or more rebate including necessary fixing lugs,hinges, lock strike plate all as specicified & directed 26 M&L 12 mm thick Veneered decorative plywood, grade 1(with BWR resin) with decorative face veneers on both faces; fixed with screws to timber frame work all as specicified & directed 27 S&F Continuous (piano) hinges, mild steel, bright finish or electro galvanised all as specified & directed 28 M&L in repairs Second class hard-wood clean sawn timber framed and fixed in scantlings all as specicified & directed 29 M&Lflush shutters 30 mm thick solid core constructions with block board core, ply wood face panels commercial type on both side all as specicified & directed 30 S&F 30 mm thick 2nd class H.W glazed or skeleton shutter open rebateddivided into square with plain chamfered or rounded mitred and rebatedwith out sash bar and prepared to receive gauze or glaze, size of members as per clause 8.20 (a) of SSR pt-I all as specified & directed 31 S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, supplying & fixing in opening as per specification & drawing all as specified & directed 32 S&F Factory Made Solid PVC Moulded Door Shutters 28 to 30 mm thick (style:), with 2,4 or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front Face & 2mm Plan colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing all as specified and directed 33 S&F stainless steel wire cloth 0.56 mm nominal dia of wire and average width of aperature 1.18mm including fixing with wooden/steel batten all as specicified & directed 34 M&LAluminium anodisedbarrel tower bolts of stove enamelled black with bright bolt and fixed 150mm long all as specified and directed. 35 S&F butt hinges heavy weight cold rolled mild steel 100 mm and fixed all as specicified & directed. 36 S&F Aluminium alloy sliding door bolt 300 mm long, plate type, stove enamelled black with bright bolt not less than 12 mm dia with and includingmildsteelmin of 6 bolts and nuts, 4 on bolt plate and 2 on staple plate fixed/welded to door shutter/frame all as specicified & directed 37 M&L for Aluminium handles pressed oval typehandles stove enamelled black for doors 150 mm long all as specified and directed. 38 Taking down cement plaster in any description includingracking out joints hacking for key and scrubbing down with water all as specicified & directed. 39 Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles and rubbish off the premises all as specicified & directed. 40 M&L for rendering 10mm thick, on fair faces of brick work or concrete surfaces of walls in CM 1:6 finished surfaces even and smooth w/o using extra cement all as specified and directed. 41 M&L rendering 10mm thick, on fair faces of brick work or concrete surfaces of ceiling in CM 1:4,finished surfaces even and smooth w/o using extra cement all as specified and directed. 42 M&L rendering 15mm thick, on fair faces of stone/block masonry surfaces or surfaces of walls in CM 1:4 including WPC all as specified and directed. 43 Supply only water proofing compound 44 M&L for providing and carry out water proofing treatment to toilets, sunken floors of slabs, wet areas etc, after proper surface preparation, carry out cementious injection grouting at leakage points using cobex 100 plasticised expansive grount admixture, application of polymer modified vatta at slab and wall junction using nitobond SBR latex- screed modifier cum bonding agent and application of two coats of brush bond RFX - two- Part acrylic polymer modified cementious elastometic waterproof and protective coating and ponding for 2 to 3 days including all tools and tackles as per manufactures specification all as specified and directed. 45 M&LPCC 1:4:8 type D2 (uisng 40mm graded crushed stone aggregate) as in foundation filling and mass concrete, for sunkun floor all as specified and directed. 46 M&L coloured Non Skid Joint free ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exc 0.11 but not exc 0.18 sqm, in floors, etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of the tiles laid over cement screed 15mm thick in CM 1:6 all as specified and directed. 47 M&L coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exc 0.18 but not exc 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of the tiles laid over cement screed 15mm thick in CM 1:6 all as specified and directed. 48 As per item No. 47 but in skirting over 10 mm thick plastering in cm 1:4 all as specified and directed. 49 M&L coloured Glazed ceramic tiles in vertical surface of size 300mmx450mm x 6 to 7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of the tiles laid over cement screed 10mm thick in CM 1:4 all as specified and directed. 50 M&L Machine cut KOTA stone slab flooring 20-25 mm thick laid and jointed in neat cement slurry mixed with pigment to match the shade of the slab including cutting and polishinglaid over and including 15 mm thick screed bed in CM 1:6 all as specified and directed. 51 All as per item No 49 above but in riser, step, skirting, dados and pillar laid over 10 mm thick plasteringin cement morter 1:4 all as specified and directed. 52 M&L Granite slab 20 mm thick machine cut bedded and jointed with grey cement and pointed with white cement and adhesive of pigment to match the shade of the slabincluding cutting and polishing laid over cement screed 15 mm thick in CM 1:6 all as specified and directed. 53 Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations all as specified and directed. 54 M&L in repairs kitchen sink with drainage board made of stainless steel 1mm thick with plugs washers and wastes including bedding in cement mortar to drawf wall inclfitting cantilever bracketsand connecting union to pipe overall size 915mmx460mm and bowl size410mm x 330mm x 160mm all as specified and directed. 55 S&F in repairs Looking mirror 600mm x 450 mm beveled edge of selected quality glass fixed with PVC moulded frame, fixed to plugs withchromium plated brass screws with glass shelf all as specified and directed. 56 S&F in repairs steel plate rack of size 90cm x 75cm x 20cm all as specified and directed. 57 S&F in repairs 20mm dia CP curtain rod all as specified and directed 58 S&F in repairsbracket of fancy type curtain rod powder coated 20mm dia including fixing to walls with MS full screws (including fixing of wooden pieces of required size of walls) all as specified and directed. 59 S&F in repairs aluminium anodised Tubular towel rail 20mm dia, D type, 60cm long between flanges all as specified and directed. 60 S&F in repairs stop valves cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe 15 mm dia all asspecified and directed. 61 S&F in repairs bib taps CP Brass with crutch or butterfly handle screwed down screwed for iron pipe or for brass ferrule 15mm dia all as specified and directed. 62 S&F in repairs brass CP shower rose 125mm size with swivel joints including fixing to steel pipe all as specified and directed. 63 M&LPCC 1:3:6 type C1 (using 40 mm graded crushed stone aggregate) 75 mm thick as in Plinth, Path, floorwith fair finished surfaces of concrete withoutusing extra cement all as specified and directed. 64 S&F in repairs viterious china wash hand basin white flat back size 550 x 400 mm excludingtaps waste chain and plug and porcelain stopper but including necessary brackets CP wastes andother fittings all as specified and directed. 65 S&F in repairs pillar taps chromium plated cast copper alloy with capstan heads screwed down high pressure with or without letteredHot OrColdWith long screwed shanks and fly nuts screwed for iron pipes 15mm dia all as specified and directed 66 S&F in repairs PVC waste outlet pipe for kitchen sink all as specified and directed. 67 S&F in repairs PVC waste outlet pipe for 32/40mm dia WHB all as specified and directed. 68 S&F in repairs PVC connection 450 mm length, suitable for 15 mm bore pipe with PTMT nuts all as specified and directed. 69 S&F in repairs PVC connection 600 mm length, suitable for 15 mm bore pipe with PTMT nuts all as specified and directed. 70 S&F in repairs water closet (Squatt Pattern) including provn of lime concrete bedding Orissa pattern size 580 x 440mm white integral foot rests (excluding flush pipe or flushing cisterns) including connection to trap and flushing pipe, anti syphonage pipe and making good to floor to match with existing surfaces all as specified and directed. 71 S&F in repairs PVC High/Low level flushing cistern 10 litres capacity including all fittings i.e float valve, syphon, flush pipe, brackets all as specified and directed. 72 M&L PCC 1:2:4 type B-0 (using 12.5mm graded crushed stone aggregate) as in coping, hold fast toblock filling pressed steel door frame all as specified and directed. 73 M&L painting to wooden surfaces of any description over 10 cm widthor girth including prepration of new or untreated surfaces and applying two coats of synthetic enamel paint over one coat of pink primer all as specified and directed. 74 M&L for preperation of new / old surfaces and Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) all as specified and directed. 75 Preparation of new plastered surfaces of wall and applying two coats of oil bound distemper of approved colour and pattern over a coat of chalk whitening andprimer over 3mm thick wall care putty finished surfaces even and smooth all as specified and directed. 76 M&L Complete removal of existing treatment & applying two coats of oil bound distemperof approved colour and pattern over a coat of primer over 2mm thick wall care putty finished surfaces even and smooth all as specified and directed. 77 Preparation of new plastered surfaces on ceiling and applying three coats of white washover 3mm thick wall care putty finished surfaces even and smooth all as specified and directed. 78 M&L for Complete removal of existing treatment on ceiling & applying applying three coats of white washover 3mm thick wall care putty, finished surfaces even and smooth all as specified and directed. 79 Demolition of stone/brick /PCC block masonry built in cement mortar or cement lime mortar all as specified and directed. 80 M&L for Pre-cast cement concrete block masonry type C1, 1:3:6 (using 20mm graded crushed stone aggregate) with solid blocks, exc. 10 cm in width and setting in cement mortar 1:6all as specified and directed. 81 Taking down drain pipes (any size or pattern), including all fittings, T,bends,etc., including cleaning or refixing (measured overall as fixed along the centre line over fitting and accessories) all as specified and directed. 82 S&F 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls all as specified and directed. 83 All as per item No 82 above but fixing only 84 S&F 75mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls all as specified and directed. 85 All as per item No 84 above but fixing only 86 S&F 110mm dia PVC (SWR) bends of any radius 87 S&F 75mm dia PVC (SWR) bends any radius 88 Cutting holes n.exc 150 sq cm in brick wall built in cement morter or cement lime mortar & Making good wall all as specified and directed 89 S&F Grating doom 100mm dia of PTMT (Minimum weight 25gms) with hole /without hole all as specified and directed 90 M&LPVC (SWR) floor trap 75mm, plain with grating including jointing with solvent cement all as specified and directed 91 M&L PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement all as specified and directed 92 Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixtures and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors all as specified and directed. 93 M&L for point wiring complete with 1.5 Sqmmsingle core FRLS PVC insulated unsheathed cable 1100 V grade multi stranded copper conductor drawn through non metallic rigid PVC conduit and accessories concealed in walls/ceilings including 1.5 Sqmm dia multistranded copper cable as earth continuity conductor connected to common earth dolly, including 1.22 mm thick pressed steel terminal boxes to provision of Modular switches to house switch/regulators etc including Modular Plate and Covers for one fan/light /bell point controlled by one switch/bell pushall as specified and directed. 94 All as per item No 93 above for one 3 pin 5 Amps socket on same board control with other switches on same board 95 All as per item No 93 above for one 3 pin 5 Amps socket on independent board 96 All as per item No 93 above but for for one light point controlled by two way switch all as specified and directed. 97 All as per Item No 93 here-in- before but with 2.5 Sqmm PVC insulated multistranded copper conductor with 2.5 sqmm cable as earth continuity conductor for Power Socketon independent board on the existing Concealed conduit all as specified and directed. 98 All as per Item No 93 here-in- before but with 4Sqmm PVC insulated multistranded copper conductor with 4 sqmm cable as earth continuity conductor forPower Socket/AC/Geysers on independent board on the existing Concealed conduit all as specified and directed. 99 S&F modular switch 1 way 6A 1 module all as specified and directed. 100 S&F modular switch 2 way 6A 1module all as specified and directed. 101 S&F modular bell push6A 1module all as specified and directed. 102 S&F modular socket 6A2/3 pin combined 2 module all as specified and directed. 103 S&F modular socket 16A2/3 pin combined 2 module all as specified and directed. 104 S&F modular switch 1way16A 1 module all as specified and directed. 105 S&F Modular fan regulator all as specified and directed. 106 S&Felectric bell Ding Dong, AC 230 volts all as specified and directed. 107 S&F ceiling rose surface bakelite with three terminals all as specified and directed. 108 Supply & fix LEDfitting for Bldg security, 35 Watt,230 V,AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65 / 66 protection complete including conncting with 1.5 sq mm copper condector 3 core flexible cable from fitting connector to ceiling rose and fixon wall with clamps & nut bolts and necessary GI bracket made of 32 mm light grade GI pipe of 1 mtr lenth with necessary bending all as specified and directed . 109 Supply and fixing LED lights fitting 1x 20W, 220V, AC, decorative box type with driver, holder incudingl LED tybe light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose all as specified and directed. 110 Taking down old unserviceable Tube light fitting of any type and S&F wall/ceiling mounted LED tube light fitting, Energy efficient high quality invertor batten having Lithium ion battery of 3.7V, 19 WH for backup upto 2Hrs with high power brightness having BIS certification, LED fitting should be LM 80 certified with system efficacy greater than 100 lumens/watt, including LED tube 20/22 watt having colour temperature 6500 K (4 feets long) , PF> 0.95, THD less 10%, with IP20 protection having open and short circuit protection, having input voltage range 90V to 300V connecting with three core flexible copper wire from connector to ceiling rose/angle holder as per existing site requirement as directed by Engr-in-charge. Make :Jaquar/Halonix/Philips .Note :- The rates are inclusive of cost of ceiling rose -01 nos and square box-02 nos including suitable size of clamps and screws etc. 111 S&F LED Light fitting mirror type with high output diffuser 2 feet, 1 X 10 watt,220 V, ACdecorative type with driver holder and LED lamp, Alluminium housing,including connecting up with three core flexible copper conductor cable of suitable sizeall as specified and directed. 112 Taking down old unserviceable wall bracket light fitting of any type &S&F wall mounted high quality indoor wall bracket light cylinderical/oval shapeaesthetically designedfitting in wooden housing, glass and B22/E27 holder complete includinginverter LED bulb B-22 cap with opal diffuser, IP-20 and inbuilt battery backup (LED INVERTER LIGHT 10W B22 CW IP) 10 watts including necessary eletric connection with PVC insulated multistranded copper cable of size 1.5 sqmm 3 core from ceiling rose to fitting terminalall as specified and directed. 113 Taking down unserviceable submain wiring and M&L for submain wiring in PVC conduit with two runs of 6 sq mm and one runs of 6 sqmm for earth continuity 1100 v grade PVC insulated unsheathed FRLS grade copper conductor cable single core multistranded ISI marked (IS 694) drawn through and including 25 mm dia PVC rigid connduit heavy grade ISI marked (IS 9537 Part III) includung accessories such as bends, supports, etc. all as specified and directed. Note: Two runs of 6 sq mm and one runs of 6 sqmm cable along with conduit shall be measured as one length. 114 S&F in repairsMCB DB SPN 12 way of any size and capacity double door type horizontal with 200A busbar including disconnecting from mains and making good the disturbed surfaces all as specified and directed. 115 S&FMCB SP of capacity 5A - 32A B curve all as specified and directed. 116 S&FMCB, SPN (Double Pole) 40 amps, 240 Volts, 10 KA‘’C” curve all as specified and directed. 117 M&L for earthing complete with 600x600x6mm galvanised steel earth plate electrode buried vertically in ground (earth pit not less than 2.25 metre deep below normal ground level) with top edge of the plate at a depth of not less than 1.5m below ground level, connected to and including G.I. wire of size 4 mm diaby means of bolts, nuts and check nuts and washers of galvanised steel, GI pipe 15 mm dia light grade pipe for protection of GI earth lead wire both to be provided to the extent of 7.5 metres as earthing lead and connecting to the equipment/machinery etc. including charcoal dust and common salt packed all around the earth plate in alternate layer in the earth pit all as per electrical plate No. 3 of SSR Part I-2009 including PCC chamber made up of PCC 1:3:6 type C1 & RCC Chamercover of size 540x540x100 mm made with 1:2:4 Type B1 using 8 mm round MS bar for reinforcement & 8 mm MS bar for handle,20 mm dia medium grade G.I. watering Pipe from top edge of the earth plate upto M.S. funnel with wire mesh provided inside the concrete earth pit for watering arrangement including excavation and earth work in any type of soil and testing on completion all as specified and directed. 118 M&L for taking down existing Exhaust fan steel body, celing cable end, dismantling blades and removing fan and blades to store painting of exhaust fans complete, in situ with synthetic enamel paint by spraying including filling cavities with filler, one coat after cleaning all dust etc after complete repairing of builidng, fixing exhaust fan on existing position all as specified and directed. (for Kitchen) 119 M&L for taking down existing ceilingfan, celing cable end, dismantling blades and removing fan and blades to store painting of ceiling fans complete, in situ with synthetic enamel paint by spraying including filling cavities with filler, one coat after cleaning all dust etc after complete repairing of builidng hanging ceiling fan on existing position all as specified and directed. . 120 M&L for Fan hook, clamps, hold fasts with all necessary materials for hanging fan all as specified and directed. 121 S&F singlepole and neutral enclosure with a two pin and earth plug and socket with 20 Amp DP MCB all as specified and directed. 122 Taking down the existing serviceable KWH meter from site without any damagecleaning it properly and refixing the same in the new panel as directed by Engr-in-charge of the each block after completion of work all as specified and directed. 123 Supply, install testing and commissioning factory made CPRI approved indoor type LT panel board wall mounted, self supporting compartmentalised design of suitable size but not less then 1.2 Mtr X 1 Mtr X 0.3 Mtr, 440 V 3 phase 4 wire system powder coating provided with suitable to make it dust/vermin proof. The panel shall be made with 2 mm thick CRCA sheet for outer shell and inner shell made out of 1.6 mm thick CRCA sheet,double door with front openable with locking arrangement, provision of threaded earthing stud at bottom, inner shell be compartmentalized, front openable single door system lockable. Inner shell completely vermin proof and to accommodate incoming/outgoing MCCBs, MCBs and TPN aluminium bus and extension links. Aluminium bus bar of capacity 200 Amps- 4Nos,including neutral duly insulated with colour coded heat shrinkable sleeve and shall be mounted on suitable size/rating of epoxy resininsulator all housed in suitable bus bar chamber.All control wires shall be with 2.5 sqmm multi stranded copper conductors and shall be properly bunched,tied, ferrulled for proper indentification and crimped with adequate size of lugs andprovision and fixing of Voltmeter,Ammeter with built in selector switch, CTs of suitable ratio, and pilot indication lamps completealong with provision of necessary cable entry/exit boxes for all incoming and out going cables with suitable size of cable glands etc. Computer cut shelf adhesive vinyl danger notice plate having conventional symbol of bone & skull be provided. The panel shall consists of following accessories:-Location :- (P-23 bldg)Incomera) MCCB four pole 16 KA rapturing capacity 63 Amps Ics= 100% of Icu thermal magnetic setting including connection with bus bar- 01 Nos(as incomer)Out going a) MCB SPN 40 Amp 10 KA B curve-4 Nos (out going )for each Qtrb) MCB SPN 10 Amp 10 KA B curve-01 Nos (out going )(for staire light and Bldg/S/Light) c) Voltmeter0 to 500voltsof size (square dialed) 96 X 96 sq mm flush mounted, AC 50 Hz three phase energy accuracy class 1.0 including inbuild selector switch - 01 Nosd) Ammeter 0 to 100 amps of size 96 X 96 sq mm flush mounted, AC 50 Hz three phase energy accuracy class 1.0 including inbuild selector switch and suitable ratio of CTs complete - 01 Nos e) LED type RYB phase indicator lamp with back up HRC fuse- 01 Set f) Suitable space for fixing 4 Nos single phase smart energy meter. 124 Supply, laying and testing cable XLPE Insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 35 sq mm 3.5 coreall as specified and directed. 125 Excavation in trenches not exc 1.5m wide and not exc 1.5m in depth for foundation of poles stays laying of electric cables, pipes etc and getting out in soft/loose soil all as specified and directed. 126 All as per item No 125 above but in hard/dense soil. 127 Removing excavated material of soil to a distance not exceeding 50m and depositing where directed at a level not exc 1.5m above the starting point all as specified and directed 128 Returning, filling in,including spreading, levelling watering and well ramming in layers not exc25cm in soft/loose soil all as specified and directed. 129 M&L for riddled earth forcushioning to under ground electric cable including spreading, levelling and hand punning all as specified and directed.Note - Punned thickness shall only be measured & paid. 130 M&L for road cutting / foot path and making good with PCC 1:3:6 TYPE C-2 ( using 40 mm graded crushed stone aggregate ) of 150 mm all as specified and directed. 131 Supply and laying un-reinforced precast concrete cable cover LV, Type I, flat size 250mm x 150mm x 40mmfor Under ground cable all as specified and directed. 132 Supply and laying GI tubes light grade, galvanized, 40 mm borein repair ,laid in trenches or under floor or fixed with poles/walls for protection of electric cable all as specified and directed.
