Tender For Special Repair To Bldg No 233/02, 233/04 And 198B Or Toilet At 75 Med Regt And Addn/Altn Of Toilet Block In Sainik Suvidha Parisar And Furniture Yard Under Ge (North) Meerut Cantt; 1 Demolition of cement concrete of ground floor n exc 15 cm in depthin any position nototherwise specifically provided for complete all as specified and directed. 2 Dismantling, floor, hearth or wall tiling including cement mortar bedding but not backing and removing rubbish off the premises complete all as specified and directed. 3 M&L for PCC 1:2:4 type B-1 (using 20mm graded stone agg)25 mm thick for Sub base flooring complete all as specified and directed. 4 M&L non skid coloured ceramic tiles 7 to 8mm thick(Square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or colour cement to match incl 15mm thick screed bed in CM 1:6 complete all as specified and directed. 5 M&L glazed ceramic coloured tiles in vertical surfaces 450 x 350 x 7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 15mm thick backing coat to receive tiles in CM 1:6 complete all as specified and directed. 6 Taking down of chowkhats or frame with shutters (without taking off shutters from the frames) n.exc 1.50 Sqm each complete all as specified and directed. 7 Taking down of chowkhats or frame with shutters (without taking off shutters from the frames) exc 1.50 Sqm & n exc 4 Sqm each complete all as specified and directed. 8 S & F for Factory made double extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/Chowkhat of size 65x100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof,water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. Note :- (i) Rates inclusive of M.S. hold fast/ lugs or SS dash fasteners. (ii)For WPC solid door/window frames,minus 5mm tolerance in dimension i.e.depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be madecomplete all as specified & directed. 9 S & F for Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/Chowkhat of size 45x85 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof,water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. Note :- (i) Rates inclusive of M.S. hold fast/ lugs or SS dash fasteners. (ii)For WPC solid door/window frames,minus 5mm tolerance in dimension i.e.depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be madecomplete all as specified & directed. 10 S & F for 30mm thick Factory made single extruded WPC (Wood Polymer Composite) solid Moulded WPC door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N edge),minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge.(Note: stainless steel butt hinges and necessary S S screws shall be paid separately) 11 S&F for factory made gauzed shutter made out of angle iron 35 mmx 35 mmx 5 mm and 25 mmx 25 mmx 5 mm and 1.5 mm thick, 10 mm square bars grill with stainless steel fly proof wire mesh having stainless steel 0.5mm nominal dia wireand 1.20mm average width of aperture includingtwo coats ofsynthetic enamel paint over a coat of red oxide primer complete all as specfied and directed. 12 S&F steel ventilator with to hung shutter incl hinges steel peg stay complete all as specified and directed. 13 M&L preparation of new or previously untreated steel surface of any description over 10cm width or girth and applying two coat of synthetic enamelover one coat of red oxide primer complete all as specified and directed. 14 S&F Aluminium handles, cast type, anodised of 150 mm size complete all as specified and directed. 15 S&F Aluminium, anodised, barrel tower bolts of extruded section of 150 mm long complete all as specified and directed. 16 S&F SS heavy weight butt hinges 100mm in sizecomplete all as specified and directed. 17 Demolition ofbrick work or stone/boulder masonary built in cement mortar incl all quoins arches pillars etc. complete all as specified and directed. 18 M&L forbrick work with old size fly ash straight or curved on plan exc. 6 m mean radius, built in CM (1:6) complete all as specified and directed. 19 M&L forbrick work with old size sub class B bricks, straight or curved on plan exc. 6 m mean radius, built in CM (1:6) but except bricks complete all as specified and directed. Note :- Old serviceable bricks retrived from demolition shall be re-used under this item. 20 Taking down cement plaster from brick or stone walls incl racking out joints hacking for key, scrubbing down with water etc complete all as specified and directed. 21 M&L rendering 15mm thick on fair faces of brick work or concrete surface in CM 1:6, surface finsihed even and smooth without using extra cement complete all as specified and directed. 22 M&L Rendering 5 mm thickon fair faces ofbrick workor concrete surfaces, finished even and smooth on ceiling in cement mortar (1:3), complete all as specified and directed. 23 M&L rendering 15mm thick on fair faces of brick work or concrete surface in CM 1:4,surface finsihed even and smooth without using extra cement complete all as specified and directed. 24 M&L applying two coats cement base paint on wall including preparing new plastered surface including 2mm wall care putty complete all as specified and directed. 25 M&L preparation of new ceiling surface and applying three coat of white wash complete all as specified and directed. 26 M&L preparation of newly plastered surface of wall and applying two coat of oil emulsion distemper over a coat of approved wall care putty complete all as specified and directed. 27 Cutting chases ,pinning in brick work girth exc 10cm but n exc 20 cm and making good to facing where required and poiningin cement mortar 1:3 to ends of edges of landing, sun shades, chajjas, shelves etc complete all as specified and directed. 28 Taking up or down steel tubing and connection 15 mm bore pipe and removing from site complete all as specified and directed. 29 All as per Sl Item No 28 above but 20 mm bore pipe complete all as specified and directed. 30 Supplying and laying of CPVC 20mm outer dia pipes SDR 11 & Plain CPVC SDR 11, with all fittings and fixed on walls/ceiling or laying in floors complete all as specified and directed. 31 Supplying and laying of CPVC 25mm outer dia pipes SDR 11 & Plain CPVC SDR 11, with all fittings and fixed on walls/ceiling or laying in floors complete all as specified and directed. 32 Dismantling OH water tank of capacity exc 250 ltr but not exceeding 500 ltr and removing from site complete all as specified and directed. 33 S&F 1000 litre rotational moulded triple layer polyethlene water storage tanks white colour (cylindrical vertical with closed top) including nipple nuts, washers for fixing inlet, outlet/ washout pipes and air vent pipes and suitable size of MS tasla with locking system hoisted and fixed in position all as specified in SSR Part I complete all as specified and directed. 34 S&F 20 mm dia ball brass valves, high pressure with polythene float and fly nut complete, screwed for iron pipe or for brass ferrule complete all as specified and directed. 35 S&F in repair Gun metal globe or gate valves with Iron wheel head screwed both ends for iron pipe 20 mm dia.fixed in repair) complete all as specified and directed. 36 S&F in repairGun metal globe or gate valves with Iron wheel head screwed both ends for iron pipe 25 mm dia.fixed in repair) complete all as specified and directed. 37 S&F in repair 15 mm dia bib tap fancy type chromium plated with with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.Make:- Cera Cat Part No-F-1014152, Pearl Cat Part No- ARI-003, Hindware Cat Part No-F330011 38 S&F in repairs 15mm dia Stop valves/angle cock cast copper alloy chromium plated screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.Make:- Cera Cat Part No F-2002361, Pearl Cat Part No ARI-004, Hindware Cat Part No- F-330043 39 Supply & fix PVC connections of 450mm long suitable for 15mm dia iron pipe including PTMT nuts complete all as specified & directed. 40 S&F in repair CP brass soap dish complete all as specified and directed. 41 S &FGrating doom 100mm dia of PTMT (Minimum weight 25gms) complete all as specified and directed. 42 S&F vitreous china wash down water closet pan(pedestal patern), white including fixing bolts and connection to drain pipe or out going pipe but exclduing flushing cistern and flush pipe complete all as specified and directed. 43 S&F in repair vitreous china squatting pan of orrissa pattern long pan size580 x 440 mm white with Por S trap size100 mm dia front or back inlet and integral foot rest any pattern (excluding flushing cistern and flush pipe) including provn of lime concrete bedding (1:2:5), minimum 150mm all round and finish just below level of rim of pan complete all as specified and directed. 44 S&F in repair 10 litre capacityPVC valveless, Syphonic action type, fluhing cistern low level,white with inlet ball valve, float and handle including brackets and PVC flush pipe etc complete all as specified and directed. 45 S&FWash basins, Vitreous China (flat back or angle back type) incl pedestal size 550x400mm, including fixing acessories like brackets, rig bolts, 32 mm dia waste coupling and cutting for and pinning in ends of brackets or erecting stand but excluding of fixing of supply and waste pipe complete all as specifed and directed. 46 S & F Vitreous China bowl urinal flat back, size of 465 x 355 x 265 mm white (minimum), with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) complete all as specified and directed. 47 S&F in repair factory made 600 x 450 mm beveled edge mirror 5.5mm thick of selected quality glass and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed. 48 Supply and fixingPVC pipes of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc., any type of pipe 32mm bore suitable for wash hand basins/sinks complete all as specified & directed. 49 S&F in repair ,PVC(SWR) floor trap, 75mm bore, plain with grating including jointing with solvent cement complete all as specified and directed. 50 S&F in repair ,PVC(SWR) gully trap, 125/110mm bore, plain with grating including jointing with solvent cement complete all as specified and directed. 51 Supply and fixin repairs 75mm bore PVC(SWR) Pipes single socketed in any length with rubber ring joints, fixed to walls and floor etc.as in wastecomplete all as specified & directed. 52 Supply and fix in repais 110mm borePVC (SWR) Pipes single socketed in any length with rubber ring joints, fixed to walls and floor etc.as in waste and rain water pipes complete all as specified & directed. 53 S & F stack clamps made out of 50mm by 5 mm flat iron and 16 mm dia round iron stays including bolts and nuts and securing ends of stays to wall or roof suitable for 75/110 mm bore pipe complete all as specified and directed. 54 Supply and fix PVC (SWR) bends 75mm bore, any radius complete all as specified & directed. 55 Supply and fix PVC (SWR) bends 110 mm bore, any radius complete all as specified & directed. 56 S&F110mm PVC (SWR) vent cowl complete all as specified and directed. 57 S&F 110 PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and directed. 58 S&F 110mm PVC (SWR) Strap complete all as specified and directed. 59 Material & labour for sunken slab treatment comprising ofthe following :-(a) Taking out/ down old existing sunken slab treatment and cleaning the old RCC surfaces of sunken slab including removal of the rubbish from the site of work to a distance n.exc. 250m complete all as specified and directed.(b) Material & labour for 25mm thick PCC 1:2:4 type B-0 (using 12.5mm graded stone aggregate) over cleaned sunken slab surfaces.(c) Material & labour for applying bituminous priming coat/tack coat overPCC surfaces @ 0.30 Kg per square metre of surfaces. (d) Material & labour for applying bitumen grade 85/25 over priming coat @ 1.20 Kg per Square metre. (e) Material & labour for 25mm thickplastering in CM 1:4using water proofing compound (WPC) @ 200 ml per bag of cement.on wallof sunken floor (f) Material & labour for suitable thickness of PCC 1:5:10 type E-2 (using 40mm graded broken brick aggregate) for filling in the sunken portion of slab up to its floor level.(g)Supply & fix of 32mm dia GI pipe medium grade, 450mm long (for draining out the water)complete all as specified and as directed. 60 M & L for cutting of bushes small trees (Peepal small plants etc) trunks shrubs of any dia and girth from roof projection, chajjas , wall junction parapet etc at any height by necessary demoliton of brick work etc if requried and making good distrubed surfaces to match with existing finihes with and incl material and labore in CM 1:4 mixed with WPC /PCC 1:3:6 type B0 /Bk work in CM 1:4 as required at site and as directed by Engr-in-Charge 61 Supply only liquid water proofing compound complete all as specified and directed. 62 M&L for 75mm thick cement concrete (1:3:6) type C1, using 20mm graded stone aggregate as in plinth protection, finishing cement concrete surfaces even and smooth without using extra cement, Joints of plinth protection shall be filled with bitumen mastic (1:3)complete all as specified and as directed. 63 M&L for chequered cement concrete colourtiles glossy finish size 300mm cmx300mmx25 mm thick, with colour pigment, set, jointed and pointed in neat cement slurry over and including 15mm thick screed bed in cm (1:6) complete all as specified and directed. 64 M&L for pcc 1:3:6 type C1 using 20mm graded stone aggragate as in bed bricks, coping etc including weathering slightly rounded or chamfered angles and throating making groves for fixing of man hole cover including necessary form work complete all as specified and directed. 65 Demolition of Stone slabs and tiles of any description or thickness in floors, apronslaid and pointed in any mortor etc. 66 M&L for 16-18mm thick black granite stone slab machine cut in cooking platform, jams, pillars, windows cills and the like laid over and including 15mm thick screed bed or backing coat in cement mortar (1:4) and jointedwith grey cement slurry and pointed with white cement and with admixture or pigment to match the shade of granite stone including grinding and polishing complete all as specified & directed. 67 M&L for 16-18mm thick black granite stone slab machine cut in skirting/dado, cooking platform, jams, pillars, windows cills and the like laid over and including 10mm thick screed bed or backing coat in cement mortar (1:4) and jointedwith grey cement slurry and pointed with white cement and with admixture or pigment to match the shade of granite stone including grinding and polishing complete all as specified & directed. 68 Supply and fixing factory made ventilator with frame incl stainless steel fly proof wire mesh having 0.56 mm nominal dia of wire and average width of aperture 1.18 mm & 5.5 mm thick glass (As approved by GE) panes fixed (partially glazed & partially wire mesh) made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 (+) (-) 0.2 mm and single glazing bead/ double glazing bead of appropriate dimension uPVC white colour sliding glazed ventilator comprising uPVC multi chambered frame with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 (+) (-) 0.2 mm thick galvanized mild steel section made from roll forming porcess of required length (shape & size according to uPVC profile) including appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardwares and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. Rate inclusive of (Single/ double glass panes, wire mesh and silicon sealent and shall not be paid separately) Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. 69 Dismantling wrought iron or mild steel work of any description not otherwise provided for 70 M&L Framed work such as grills, angle grating etc. with ends of bars shouldered and or riveted or forged into spikes, framed guard bars, railings and similar work confirming to Fe-410-O or Fe-310-O, complete all as specified. 71 Supply & fix 150mm size aluminium alloy handles cast type anodizedfixed with ss screw complete all as specified. 72 M&L preparation of new or untreated steel surface of any descriptionover 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. 73 S&F aluminium slidingbolt 300 long bolt type with bright bolt not less than 12 mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate all as specified & directed 74 S&F heavy weight butt hinges 100mm in sizecomplete all as specified and directed. 75 S&F aluminium anodised barrel tower bolt with bright bolt 200 mm long.all as specified & directed 76 M&L for stone slab 50mm thick stone dressed true and square, in one length not less than 60cm and n. exc 120cm inchajjas, sunshades,Plinth Protection etc., punched dressed on exposed faces and self faced on the embedded unexposed beds and joints; exposed edges rounded or chamfered as directed, set, jointed and pointed in cement mortar 1:4 complete all as specified and directed. 77 M & Lfor applying 15 mm thick rendering CM 1:4 on brick / concrete surfaces of external walls finished even and fiar, using water proofing compound @ 3% by weight of cement or as per manufacturer instructions, complete all as specified and directed :Note:- Water proofing compound shall be measured and paid sepratly 78 Preparation of old surface of existing treatment by mechanical means complete all as specified and directed 79 M&L for applying 2.00mm thick wall care putty making smooth surface complete all as specified and directed. 80 M&L for Two coat of OBD using spray machine for painting complete over one coat of primer all as specified and directed 81 M&L for preparation of old/new decorated/undecorated surface of exterior/Interior wall/Ceiling of projection/chajja bycomplete removing existing treatment with mechanical sander (rpm 1500-2700)along with internal dust extraction system for clean environment certified by reputed paint manufacturers and including cutting/ uprooting trees/ wild grass complete then washing the surface with Bleaching powder solution for treatment of fungal and applying 1 mm thick white cement basewall care putty to obtain smooth finishescomplete all as specified and as directed at site by Engineer-in-Charge & incl applying Twocoats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces of wall/ceiling of projection/chajja. ,of approved make all as specified and prescribed by manufacture of paint and as directed at site by Engineer-in-Charge.Note:- (i) The work must be got executed through authorised applicator of manufacture after concluding an MoU with manufacture for company back guarantee for a minimum period of 04 years by the contractor. The authorised applicator of manufacture shall be got approved from GE before commencement of work. (ii) All the material to be incorporated on the work shall be brought by contractor to MES store yard which will be subsequently issued by deportment for incorporation in the work to ensure the quantity to be consumed all as per recommendation of manufacture.(iii) After carrying out preparation of surface the same shall be got approved from GE before application of primer and paint for each building.(iv) The colour/shade will be all as approved by GE.(v) The cost of scaffolding wherever required are deemed to be included in the rates quoted by the contractor complete all as specified and directed. The work shall be executed at a height from ground floor up to 15m (max).(vi) The old surface must be prepared in a manner so that there should not be any impression of dent and it should be made even all as per manufacture instruction to the satisfaction of Engineer-in-Charge before application of exterior paint. The cost of materials, labour & T&P required for preparation of surface are deemed to be included in the rates quoted.(vii) The application of acrylic paint/ weather coat shall be with fully automatic airless spray machine with a flow speed of min 1 litre per minutes having pressure of 3300 PSI by allowing 6 to 8 hrs to dry the surface before painting of subsequent coat. However, where it is not possible to apply acrylic paint by using the spray machine the work will be carried out manually by using roller. 82 M& L preparing plastered un plasteredold surfaces on ceiling and applying two coats of white wash on ceiling surface 83 M& L preparing plastered un plasterednew surfaces on ceiling and applying three coats of white wash on ceiling surface 84 Demolition of reinforced concreteof any description and any poisition not otherwise specifically provide ( reinforcement cut to faciliatate demolition) 85 M&L Form work to sides and soffits of beams lintels etc finishedrough 86 M & L precast reinforced cement concrete 1:2:4 type B1 (using 20mm graded stone aggegrate) as in Chullah hood chajja and manhole cover, kitchen shelves etc set in cement mortar 1:4.including all neccesary formwork & finishing exposed concrete surface all as specified and directed 87 S&F mild steel TMT bars No 500D 10mm dia and over, cut to length bent to shape requiredincluding cranking, bending spirally for hooping for columns, hooking ends and binding with and including MSwire (annealed) not less than 0.9mm dia or securing clips complete all as specified and directed. 88 ditto as perSI item no 36but 6 to 8 mm dia complete all as specified and directed. 89 S&F triple layerwhite color 500 Ltrs Rotational moulded polyethylene (PVC) water storage tanks cylindrical vertical with closed top including nipple nuts and washers for fixing inlet, outlet/washout pipes and air vent pipes complete all as specified. 90 S&F PVC Bath cabinet with mirror 18x22x4.25. Make: commander or equivalent complete all as specified and directed. 91 S&F in repairs, chromium plated towel rack of size 24 complete all as specified and directed. Make - Jaquar or equivalent (Cat No-1181) or equivalent as approved by GE. 92 S&F as in repair vitreous china wash downwater closet pan (pedestal pattern), white (flushing cistern and flush pipe) fixed with including‘P’ or ‘S’ trap and seat cover including making good the disturbed surfaces and to match with existing surface complete all as specified and directed. 93 S & F for CP Health Faucet brass body with wall hook and one meter SS braided rubber hose pipe Cat Part No.CERA F8030301. 94 Toilet paper holder of brass chromium plated conforming to the samples kept in the office of Engineer-in-Charge. 95 S&F 15 mm dia brass chromium plated central hole wash basin mixture, fancy type with or without lettered Hot or Cold ,with long screwed shanks and fly nut capstanhead screwed for 15mm dia pipe fixed in repair. 96 S&fIin repairs Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long 97 S&Ffancy type glass corner fancy type of size 250mm x 250mm of 6 to 7mm thick toughned glass with CP railing fixed with fancy type screws complete all as specified and directed. 98 S&F (in repair)chromium plated towel rail 20mm dia D type 600 mm long as a approved quality.complete all as specified and directed. 99 Supply and fixingPVC pipes of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc., any type of pipe 32mm bore suitable for wash hand basins/sinks complete all as specified & directed 100 Supply & fix PVC connections of 450mm long suitable for 15mm dia iron pipe including PTMT nuts complete all as specified & directed. 101 S&F in repair CP brass soap dish complete all as specified 102 S &FGrating doom 100mm dia of PTMT (Minimum weight 25gms) 103 S&F in Floor 140mmover all length with flap door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor all as specified 104 Material and labour for Water proofing treatment to sunken floors of kitchen, toilets, laboratories, bath ancWCs etc shall be as under :-(a) Application of Two component Acrylic modified cementitious coating(i) The surfaces to be applied shall be completely dry and free from containments such as dirt, dust, oil, surface treatments and old coatings. Concrete substrates must be mechanically prepared using abrasive blast cleaning or milling to remove cement laitance, existing coatings and achieve a gripping profile that is clean, dry and free from laitance and any other form of surface contamination.The installation instructions in manufacturers published literature should be strictly complied with, including but not limited to the following(ii) Chipping out any visible cracks in V-Groove pattern as applicable. Special attention on this part.Cleaning of cracks & then filling those cracks with SIKA latex SBR 100 putty/ Dr Fixit 302 SBR latex / Perma latex SBR / FOSROC Nitabond SBR latex / Asian Paints latex as required. Final cleaning of surface with power grinder, wire brush, hair brush & vacuum pressure if required.(iii) Dampen all surfaces immediately ahead of application of Acrylic modified Cementitious coating of SikaTop Seal - 107 / Brush Bond FOSROC/ Dr Fixit/ STP/CICO.(iv) Whilst the surface is still damp from saturation (S.S.D), apply one coat of Acrylic modified Cementitious coating of Sika Top Seal - 107 / Brush Bond FOSROC/ Dr Fixit/ STP/CICO of viscosity as per manufacturers instructions.|(v) Apply Glass Fabric Sheet of Sika Fab 1 / FOSROC/ Dr Fixit/ STP whilst the first coat is wet. (vi) Once touch dry, apply second coat of Acrylic modified Cementitious coating of Sika Top Seal - 107 / Brush Bond FOSROC/ Dr Fixit/ STP/CICO of viscosity as per manufacturers instructions on the entire area. (vii) Second coat shall be applied after 6-8 Hrs of application of previous coat and in the direction right angle to the previous coat. (viii)Material & labour for suitable thickness of PCC 1:5:10 type E-2 (using 40mm graded broken brick aggregate) for filling in the sunken portion of slab up to its floor level.(g)Supply & fix of 32mm dia GI pipe medium grade, 450mm long (for draining out the water) complete all as specified and directed. 105 Taking down old existing water proofing treatment from the top of RCC/ arch slab, including taking down existing PCC padding or plaster and hacking the top of RCC slab, cleaning with water and disposal of rubbish off the premises complete all as specified & directed. 106 Material & Labour for PCC 1:2:4 type B-O(using 12.5 mm graded stone aggregates)all asspecified and directed. 107 Material and Labour for 10mm thick cement paster in CM 1:4 mixed with WPC @200 mlby weight of 50 kg cement bag finised even and smooth without using extra cement on roof surface when concreate is green and wall (WPC will be measured and paid seperately as supply only rate). 108 Supply only liquid water proofing compound 109 Material & labour for cleaning ofconcrete or plastered surface of roof and applying priming coat using with bituminous primer @ 0.30Kg per Sqm followed evenly by a tack coat @ 1.20 Kg per Sqm using 85/25 grade industrial hot blown bitumen, over it laid with 3mm thick APP modified polymeric water proofing membrane minimum weight 3.6 kg per Sqm reinforced with non-woven polyester fabric (weight not less than 160gm per sqm) unrolled & bonded to substrate with side and end laps 75mm and 100mm as per manufactures instructions and applying over it of tack coat using 85/25 grade industrial hot blown bitumen @ 1.20Kg per Sqm and finally finish the top by providing 40mm thick brick tiles kiln burnt, laid over & including 15mm thick screed bed in cement mortar 1:6,joints of the tiles grouted and flush pointed with cement sand mortar 1:3 mixed with 5% crude oil by weight of cement, complete all as specified and directed. (Note:- Dismantling of existing water tank on roof disconnected and after cleaning same position re-connecting shall be deemed included in quoted rate of item). 110 M & L repair to overhang portion of chajja, facia, dropwall etc. for continuous work by providing PCC(1:2:4) Type B-0 and finished with CM(1:3) after taking down of damaged portion of RCC work by maintaining same level and finished the surface to match with the existing surface by providing same finish. (Height of work to be considered upto 7m from FFL of Ground Floor.) (Note : Wherever reinforcement is required to be provided will be paid separately under relevant item and contractor have to inform the department one day in advance afterbinding of reinforcement for measurement otherwise no payment will be considered on this account) 111 M& L for repairing existing RCC structure work by gunting to damaged edge bottom of beam , chajja, slab 40 to 60mm thick and part of RCC member in CM 1:3 & depositing material/ mortar with spray gun under a pressure of 20 to 30 N/CM2 including skefolding and welding wire mess 2 mm diaand size of wiremesh50mm X 50 mm including cutting welding and placeing position as directed by Engr in-charge. 112 Material and labour for damproofing to wall with two component Acrylic polymer cementitious water proof elastomeric coating four grade mix to form uniform slurry and apply with paint brush as first coat then laying a layer of fibre glass mesh cloth as first coat is still green with overlap of joints of fibre mesh not less than 100 mm, then finally apply second layer mix by brush to entire surface of container covering 0.6 - 0.75 Sqm /Kg at 1 mm thickness in two coat depending on the level of substrate and curing it for minimum 3 days.Note: Quoted rate shall be deemed to be inclusive of materials all labours, tools and plants, scaffolding and working upto height 6 metre etc. Make: Pidilite Industries Ltd/ Fosroc India Ltd/ IWL India Ltd, BASF/T-Guard ANTC of Make - Trermax, complete all as specified and directed. 113 Supply & fix invitreous china urinal half stall type with including providing & fixing of plugs bedding against wall in cement mortar 1:2 pointing around urinal back in cement mortar complete all as specified. 114 M&L Concrete bed to drain pipes 150mm, including packing under, and haunching against the sides of pipes after they are laid and tested; in PCC(1:4:8) Type D-2. 115 M&L Slat-glazed stoneware drain pipes 150 mm dia laid in trenches and jointed as specfified 116 M&L Rendring 10mm thick on fair faces of brick work or concrete surfaces in CM 1:4 complete all as specified and directed. 117 M&L PCC(1:3:6) type C1 as in benching to man hole complete all as specified and directed. 118 Septic tanks , exc in ordinary soil, fdn in PCC 1:2:4, brick work in CM 1:4, RCC slab covers including RCC precast manhole cover having 6mm plate embedded all around/fibre reinforced cover with angle iron frame vent shaft and sludge chambers etc complete for 25 users complete all as specified & shown in TD Drg No CEBZ/TD/217 Sheet 1/7 to 7/7. 119 Soakage well exc, in ordinary soil, fdn in PCC1:3:6, wells of Hony combed and solid in M-25 concrete, including intercepting chamber, screen chamber brick work in CM, RCC cover slab in M-25 RR masonry/ filling with brick bats, complete of size 1.8m dia x 3.00m deep complete all as specified & shown in TD Drg No CEBZ/TD/309 Sheet No 1/4 to 4/4. 120 M & Lfor applying ready mix plaster 15 mm thick rendering CM 1:4 on brick / concrete surfaces of external walls finished even and fiar, using water proofing compound @ 3% by weight of cement or as per manufacturer instructions, complete all as specified and directed :Note:- Water proofing compound shall be measured and paid sepratly 121 Supply and lay pipe galvanized, “Medium class”, including fittings 15 mm (1/2”) dia with all fitting laid in trenches complete all as specified and directed. 122 S&F in repairs gun metal or globe or gate valves 15 mm dia with iron wheel scewed both ends complete all as specified and directed. 123 Cutting existing steel tubing for alterations or additions (Each cut measured) complete all as specified and directed. 124 Taking down carefully any type of battens or conduit point wiringwith conduit (light, fan, socket or power) complete including fittings and fixtures such as switches, sockets, ceiling roses, lamp holders, pendent light fittings, MCBs / isolators, fan regulators, tube light fittings etc removing material from site and making good disturbed surfaces of walls, ceilings etc including two coats of white / colour washing / distempering etc to match the existing complete all as specified and directed. 125 Material and labour for point wiringwith 1.5 Sq.mm nominal cross sectional area, single core, 1100 Volts grade, stranded, FRLS PVC insulated, unsheathed, copper conductor cable in and including PVC concealed conduit of any size/dia complete with all accessories/fittings, brass screws, washer etc, sunk zinc coated pressed steel terminal boxes with 3mm thick plastic laminated sheet top cover concealed in wall with and including continuous earth wire of size 1.5 Sqmm nominal cross sectional area, single core, PVC insulated stranded copper conductor cable, unsheathed and connected to common earth and earth duly complete all as specified and directed for the followings :- 126 One tube light/Bulb/ street light point controlled by one, one way switch 05 / 06 Amps complete all as specified and directed. 127 One fan / Exhaust fan point controlled by one, one way switch 05 / 06 Amps complete all as specified and directed. 128 One 3 pin, 05 / 06 Amps socket outlet point on independent board controlled by one, one way 05 / 06 Amps switch complete all as specified and directed. 129 One 3 pin, 05 / 06 Amps socket outlet point on same board controlled by one, one way 05 / 06 Amps switch complete all as specified and directed. 130 All as per serial item No 121 above but with 2.5 Sqmm nominal cross sectional area copper conductor cable for one 15 / 16 Amps socket outlet point on independent board complete all as specified and directed. 131 Supply and fixswitch piano flush type, 05 / 06 Amps single pole, one way 240 volts complete all as specified & directed. 132 Supply and fix insocket outlet 5 pin, 05 / 06 Amps flush type 240 volts complete all as specified & directed. 133 Supply & fixing of socket outlet 3 pin, 05 / 06 Amps and 3 pin 15 / 16 Amps (2 in 1 Multipurpose) 240 volts complete all as specified & directed. 134 Supply and fix inswitch piano flush type, 15 / 16 Amps single pole, one way 240 volts complete all as specified & directed. 135 Supply & fixing of ceiling rose, 3 phase/PVC/polycarbonate isolated body complete all as specified & directed. 136 Supply & fixing lamp holder (Angular / Straight), insulated body, with back plate all as specified and directed. 137 Supply and fixing LED lamp 2 pin 9/10 watt complete all as specified and directed. 138 Supply and fixing LED light fitting 1x22/25 watt,220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed. 139 Supply and fixing LED light fitting mirror type with high output diffuser 2 feet,10 watt 220V, AC decorative type with driver holder and LED lamp including connecting up withthree core flexible copeer conductor cable of suitable size complete all as specified and directed. 140 Supply and fixing 1x36/40W LED Building security lightenergy saving & environmental friendly long life luminaire with high power LEDs as light source and electronic driver including security light brackets of 32 mm dia GI pipe medium grade upto 1.2 mtr long bend to shape at 100-120 degree including flat iron clamps and Suitable nuts and bolts grouted in wall including all material required for fitting all as specified and directed. 141 Supply and fixing sheet metal enclosure double door, single pole and neutral, AC, 240 volts, 8 way, with 200 Amps rated copper bus bar and IP - 43 protection with metal double door and flush to wall including all cutting on wall and making good including two coats of white/colour washing/distempering etc to match the existing disturbed surfaces complete all as specified and directed. 142 Supply and fixing MCB, SP, AC, 240 volts C curve capacity of 06 to 32 Amps, 10kA and making connections complete all as specified & directed. 143 Supply & fixingDouble pole Isolator 240V, 32A, and making connections complete all as specified & directed. 144 supply and fixing Exhaust fan PVC with louver and fixing accessories 230 Volt and250 mm sweep complete all as specified and directed. 145 Supply and fix electric water heater storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 star rated complete all accessories such as safety valve, thermostate, NRV, connectio piece etc complete all as specified and directed. 146 M&L for making opening in the wall for fixing exhaust fan up to 250mm / 300mm,including plastering work & making good the surfaces complete all as specified and directed. 147 S&L XLPE insulated armoured heavy duty electric cable with aluminium conductor 1100 volt grade cross sectional area of 10 sqmm 2.0core complete all as specified and as directed. 148 Excavation in trenches not exceeding 1.5 Mtr wide and not exceeding 1.5 Mtr in depth and getting out including foming of bottom surface for laying of cable / pipe etc in soft/loose soil complete all as specified and directed. 149 Returning filling in including spreading levelling, watering and well ramming in layers not exceeding25 cm complete all as specified and directed. 150 Removing surplus soil to a distance not exceeding 50 Mtr and depositing where directed at a level not exc 1.5M above the starting point complete all as specified and directed. 151 M&L for sand cushioning, spreading & levelling, watering and well ramming in layers 8 cm before laying the cable and 15 cm after laying the cable and then punned. After punning the thickness of sand cushioning shall be 18 cm complete all as specified and directed. Note :- Only punned thickness shall be measured for payment. 152 Supplying & laying burnt clay fly ash old size bricks, straight or curved on plan, laid flat with width equal to length of brick, laid dry over under ground cable for protection complete all as specified and directed. 153 GI light grade tubing 40mm dia laid in trenches, road crossing , pasing through pipe or laid in wall/pole complete all as specified and directed. 154 S&F Modular Switch, 1 module, 6A, AC, 240V, one way ISI Marked and as specified. 155 S&F Modular Socket, 2 module, 6A, 2/3 pin combined, AC, 240V, ISI Marked and as specified. 156 S&F Modular Socket, 2 module, 6A / 16A, 2/3 pin combined, AC, 240V, ISI Marked and as specified. 157 S&F Modular Switch, 1 module, 16A, AC, 240V, one way ISI Marked and as specified. 158 Supply & fixingLED tube light fitting T/5 surface mounting poly carbonate 240 volts 20 watts, 6500K complete all as specified & directed. 159 Supply and fixing sheet metal enclosure double door, single pole and neutral, AC, 240 volts, 4 way, with 200 Amps rated copper bus bar and IP - 43 ,IK08 protection with metal double door and flush to wall including all cutting / chases on wall and making good including two coats of white/colour washing/distempering etc to match the existing disturbed surfacesand taking down the old distribution board of any type complete all as directed . 160 S&F in repair MCB SPN 40 Amps, AC, 240V, 10KA, ISI Marked C curve incl thimble etc complete all as specified and directed. 161 Material & labour for earthing complete with galvanised mild steel earth plate electrode 60cmx60cmx6mm thick buried directly in ground (earth pit not less than 2.25mtr deep below ground level) with top edge of the plate not less than 1.5mtr below normal ground level steel earth plate connected with GI wire 04mm dia by means oflug, bolts, nuts, check nuts, washers of galvanised iron or steel GI protection pipe 15mm bore light grade all as shown in elect plate No.3 of SSR part I connecting to main switch board / Main DB’s including excavation, earth work, salt and charcoal dust mixed and packed 150mm thick around GI earth plate, GI pipemedium grade 20mm nominal bore watering pipe GI sheet funnel wire mesh, concrete pit, RCC cover in PCC 1:2:4 type B1 duly reinforced with MS Bars 6mm dia at the rate of 150mm center to center both way with suitable lifting handle and pit / chamber in PCC 1:3:6 type C1 , Angle iron 40x40x5mm frame for pit cover including testing on completioncomplete all as specified and directed. 162 M & L Gun metal gate valve 15 mm with iron wheel head screwed both endscomplete all as specified and directed. 163 Cutting of existing CI pipes and reducing to required length before laying in position for insertion of new tees,branches etc complete all as specified and directed of size 150mm dia bore ;- Note :- Fittings will be measured and paid foe separately under respective items 164 S & F GI tubing, 15 mm medium grade,ISI marked complete with all fittings laid in trenches or laid under floors,fixed on walls on walls with and providing clamps etc complete all as specified & directed. 165 Supply and fix electric instant water heater, storage type glass line coated inner tank and heating element upto 3 KW, capacity 3 Litre, complete with all accessories such as safety valve, thermostate, NRV, connection pipes, hanging assembly etc connecting with 3 Core flexible Cu Conductor cable of appropriate size from power point to the geyser including plug top, writing MES No complete all as specified and directed.
