Tender For Development Of Seminar Hall And Professor Room At The Existing Radiology Department, Khs/Mgims, Sevagram.; 1 Civil Works 2 Dismantling brick masonry in lime or cement mortar and stacking the materils as directed with all leads, lifts etc.(0.23m thick and 0.115m thick). 3 Providing fly ash Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding etc. Complete 4 Providing and fixing in position Gypsum board false ceiling with 12.5 mm thick Gypsum boards, screwed/fixed to the under structure of suspended G.I. Grid constructed and suspended from the main ceiling consisting of ceiling sections of size 25 x 50 mm maximum center to center distance of 600 milimetre perimeter channel and intermediate channels at maximum center to center distance 1200 milimetre galvanized grid should be fixed to reinforced cement concrete slab. The gypsum board should be fixed to galvanized iron grid with necessary screws. The boards should be taped and filled from underside to give smooth, seamless ceiling. The rate should include necessary additional ceiling sections and intermediate channels. Additional intermediate channels should be fixed to strap hangers for additional support to prevent strapping at every 1200 milimetre item to be completed in all respect including necessary sleeves for ducts finishing of joints cut outs, painting including labour, material, lifts etc. all complete. 5 Providing internal cement plaster 12mm thick in Single coats in cement mortar 1:3 without neeru finish, to concrete, brick surface, in all positions including scaffolding and curing etc.complete. 6 Providing and laying vitrified matt finish tiles having size 590 mmto605mmxto605mm of 8to10mm thickness and confirming IS.15622-2006 (GroupBla) of approved make (Kajariya/Nitco/RAK), shade and pattern for flooring in required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and cleaning etc. complete. 7 Providing and laying vitrified matt finish tiles having size 590 mmto605mmxto605mm of 8to10mm thickness and confirming IS.15622-2006 (GroupBla) of approved make (Kajariya/Nitco/RAK), shade and pattern for skerting/dado in required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and cleaning etc. complete.(Using ISI approved Adhesive only). 8 Providing and laying ceramic tiles having size 30cm.x45cm. /30cm x 60cm confirming to corresponding I.S. for dado and skirting (use only Kajariya/Nitco/RAK) in required position with ready made adhesive mortar of approved quality on plaster of 1:2 cement mortar including joint filling with white/ colour cement slurry cleaning curing etc. complete. 9 Providing and fixing solid core flush door shutter in single leaf 32 mm thick decorative type of exterior grade asperdetailed drawings approved face laminate 1mm thick on both faces or as directed, all necessary beads, mouldings and lipping, wroughtironholdfasts,chromiumplatedfixturesand fastenings, with L drops, chromium plated handles on both sides, and finishing with colour polish etc. complete. 10 Removing cement or lime plaster including disposing of the spoils as directed with all leads, lifts etc. complete. 11 Providing required material 20mm to 25mm thick granite, on a bed of cement mortar 1:4 including cement float, filling joints with neat cement slurry, curing, polishing, rounding edges, cleaning complete.b) Granite 12 Providing and fixing fly proof mesh in stainless stell jali (304 grade) to ventilator/ window using standered aluminium member of size 45x 22 mm for frame work and U channel for support and fixing fly proof mesh on it and all labour charges including all fixture and fastening etc. complete, as directed by engineer incharge. 13 Providing and fixing in position (as per 1868 / 1982) Aluminium sliding window of two tracks with rectangular pipe 95 x 38.10 x 0.90 mm at weight 0.637 Kilogram/Running metre. with window frame bottom track section 92 x 31.75 x 1.30 mm at weight 1.070Kilogram/Running metre.. Top and side track section 92 x 31.75 x 1.30 mm at weight 0.933 Kilogram/Running metre. The shutter should be of bearing bottom 40 x 18 x 1.25 mm at weight 0.417 Kilogram/Running metre. Inter locking section 40 x 18 x 1.10 mm at weight 0.469 Kilogram/Running metre. And handle and top section 40 x 18 x 1.25 mm at weight o.417 Kilogram/Running metre. As per detailed drawings and as directed by Engineerincharge with all necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self-locking catch fitted in vertical section of shutter including 5 mm thick plain glass and aluminium mosquito net shutter with stainless steel jail with all required screws and nuts etc, complete. With powder coating with box.(make Jindal) 14 Providing and fixing in positionanodised aluminium openable window of any size as per detailed drawing and as directed by Engineer in charge with all necessary alluminium sections including necessary fixtures and fastening with 5mm thick clear float glass etc. complete. With powder coating with box. (make Jindal) 15 Providing and laying Cast in situ/Ready Mix cement concrete in M15 of trap/ granite/quartzite/gneiss metal for bed blocks, foundation blocks and such other items including bailing out water, plywood/steel formwork, laying/ pumping, compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed.), with fully automatic microprocessor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand (For trench filling Work). 16 Scrapping warn out old white wash, colourwash, putty,distempe, acrylic emulision paint, snowcem & exterior emulision etc. Including disposal of dust as directed : 17 Providing & applying cement base putty to old/new surface in two coats to recieve paint in all position including all material /labours scaffolding & curing etc complete (Birla wall care/Asian). 18 Providing and applying plastic emulsion paint of approved quality, colour and shade to old and new surfaces in two coats including scaffolding, preparing the surface. (Excluding the primer coat) etc. complete. (Berger/Asian/JSW). 19 Providing & applyingcement primer (Inner primer) coat to wall surface to receive distemper/acrylic emulision paint etc. (Berger/Asian/JSW) 20 Removing cement tiles, or marble or polished shahabad floor or dado without bed concrete including stacking the materials as directed with all leads, lifts etc. complete. 21 Providng and fixing in position anodised extruded aluminum partitions powder coated, partly glazed and partly laminated having frame made out of extruded tubular section of size 40 mm x 60 mm with 12 mm thick three layered flat pressed teak wood particle board bonded with BWP type exterior grade phenol formaldehyde synthetic resin conforming to IS 128231990, laminated on both sides,Novateakor equivalent and 5 mm thick selected quality plain/ float glass panels fixed with aluminum glass clips 12 mm x 12 mm and rubber cushioning beading to glass partitions as per approved drawing etc. compete . 22 Providing and fixing in position, Single shuttered/dubble shutter aluminium extruded openable door of overall size 0.90 m x 2.10 m with aluminium door frame of powder coated section 101.60 x 44.75mm , 3.18 mm thick and shutter comprising of powder coated section having bottom and lock rail of size 150 mm x 44.5 mm x 3.00 mm thick top rails 47.62 x 44.45 mm x 3.00 mm thick , vertical style 47.62 x 44.45 mm, 3.00 mm thick and for shutter plain glass panes 5 mm thick for top panels and 12mm thick both side laminated phenol bonded particle board panels for bottom panels etc. , I.S.I. mark , heavy duty, door closer (Godrej make) , having heavy duty concealed lock, necessary beading, glazing clips, PVC gaskets, 250mm length tower bolts, 150mm diam. pad handle, etc. as per detailed design and drawing or as directed by engineer in charge including all materials, labours, and equipment etc.Complete. 23 Providing and applying two coats of synthetic enamel paint of approved colour to new /old structural steel work and wood work in buildings, including scaffolding if necessary, cleaning and preparing the surface (excluding primer coat) etc. complete. (Asian Appolite)
