Tender For Providing Various Development Works At Open Space ,Narali Baug For P.M.C. PhaltanExcavation for foundation in earth, soil of all types, sand gravel and soft murum, in-cluding removing the excavated material up to a distance of 50m. beyond the building area & stacking & spreadingas directed, dewatering, preparing the bed for the foundation and necessary back filling ramming, watering including shoring and strutting etc. complete. (lift upto 1.5m)(21.01) Spec. No. : Bd A. 1 Page No. 259 Excavation for foundation in Hard Murum, including removing the excavated material up to a distance of 50m. beyond the buildingarea & stacking and spreading as directed, dewatering, preparing the bed for the foundation & necessary back filling, ramming, watering including shoringand strutting etc. comp.(lift upto 1.5m)(21.07)Spec. No. : Bd A. 21 Page No. 259 Providing dry/trap/granite/quartzite/gneiss rubble stone solling 15 to 20 cm thick including hand packing and compacting comp. spec. No. : Bd A. 12 Page No. 264 (21.38) Providing & laying in situ CC in M-10 of trap/ granite/ quartzite / gneiss metal for foundation & bedding incl. belling out water farm work compact ing , curring comp. with fully automatic micro processor based PLC with SCADA enabled reversible drum type mixer with fine aggregates (crushed sand VSI garde) spec. No. Bd E. 1 Page No. 287 (24.01) Providing & laying cast in situ/redimix concrete in M-15 of trap metal for bed block foundation block &such other item incl. bailing out water, plywood/steel form work, laying pumping compaction roughneingthem if special finish is provided finishing uneven surface & curing etc. comp. with fully autometic micro processor based PLC with SCADA enabled reversible drum type mixer with natural sand(24.08) Providing & laying in situ cement concrete M-20 of trap/ granite/quartzite/gneiss metal for foundation & bedding like raft strip foundation grillage & footings of RCC column & steel stanchions etc. incl. bailling outwater formwork, coverblocks compaction curring roughening the surface if special finish is to be provided (excluding reinforcement & structural steel)with fully automatic micro processor based PLC with SCADA enabled reversibledrum type concrete mixer with fine aggregates(crushed sand VSI garde) (25.01) spec No. Bd F. 3 Page No. 298 & B-7 Page No. 38 Providing and casting in situ cement concrete M-20 of trap / granite/ quartizite gneiss metal for RCC columns as per detailed design drawing as directed including centering form work, cover blocks, compaction androughening the surface is special finish is to be provided and curring comp.(excluding reinforcement) with fully automatic micro processor based PLC with SCADA enabled reversible drum type concrete mixer with natural sand (25.21) Providing and casting in situ cement concrete M-20 of trap / granite/quartizite gneiss metal for RCC beams & lintels as per detailed design drawing as directed including centering form work, cover blocks, compaction androughening the surface is special finish is to be provided and curring complete (excluding reinforcement) with fully automatic micro processor based PLC with SCADA enabled reversible drum type concrete mixer withfine aggregates(crushed sand VSI garde) Spec No. Bd F 6 Page no. 300 & B-7 Page No. 38 (25.41) Providing & fixing in position TMT-FE-500 bar reinforcement of various diameters for RCC file caps footings, foundations, slabs, beams, columns, canopies, stair case, newels and chajjas lintel, pardi, copings fins, arches etc.as per detail designs, drawings and schedule including cutting bending, hooking the bar binding with wire or tack welding and supporting as required complete Spec. No. Bd F 17 Page No. 306 (26.33) Providing second class burnt brick masonary with conventional/IS type bricks in CM 1:6 infoundation and plinth of inner wall / in plinth external wall including bailing out water striking joints on unexposed faces racking out joint on exposed faces and watering complete(27.01) Providing second class burnt brick masonary with conventional/IS type bricks in cement mortar 1:6 in superstructure including striking joints on unexposed faces racking out joint on exposed faces and watering comp.(27.05) Filling in plinth and floors with contractors material / brought from outside and approved by Engineer incharge in layers of 15cm to 20cm including watering and compaction etc. complete.(21.37) Providing sand faced plaster externally in CM using aproved screened sand in call position incl.base coat of 15 mm thk. In cm 1:4using waterproofing compound at 1 Kg/cement bag currin the same for for not less than two days & keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 mm thick in Cm 1:4finishing the surface by taking out grains and curring for the 14 days scaff. etc.comp. spec. No. Bd L. 7 Page no. 369 (32.11) Labour Charges for providing groove in external plaster having width and space as directed by engineer incharge etc. complete (BDL 32.22) Providing Patti/Band 150mm vide on plastered surface 12 to 15 mm thick in cm 1:3 line and level including neat cement finishing scaffolding, curring etc. complete. (BDL 32.25) Providing & applying two coats of water proof cement paint of approved manufacture & of approved colour plastered surfaces incl. scaffolding if necessary,cleaning & preparing the surface, watering for two days etc. comp. Providing & fixing mild steel grill gate with angle iron frame 65*65*10mm with iron bars at 150mm C/C & diagonal flats as per detail drawing including hinges pivot block locking arrangement welding riveting & oil painting three coats of approved shade weight of gate 35kg/sqm Spec. No. Bd. W. 6 Page No. 585(44.10) Providing & fixing heavy duty interlocking concrete rubber mould glossy paving block of 60mm thk.having strength 400kg/sqm of approved quality & shape on a bed of crushed sand of 25-30 mm thk.including stricking joints & cleaning etc.comp. (using 100% crushed sand) Spec. No. Bd M 12 Page No. 385 (33.53) Providing & fixing Precast RCC Bench Providing & laying Polished Tandur Stone flooring 25mm to 30mm thk required width in plain / diamond pattern on a bed of 1:6 C.M. including cement float, filling joints with neat cement slurry, curing, polishing & cleaning etc. comp.(33.05) Providing & fabricating structural steel work in rolled sections like joists, channels, angles tees etc. as per detailed designs & drawing including fixing in position without connecting plates,braces etc. & one coat of anticorrosive paint & over it two coats of oil painting of approved quality & shade comp.(23.01) Providing & fixing colour coated Zinc alume R) AZ150 (min 150gms / sq. mt. total one achside ) profiled sheets for roofing. The feed material is manufactured out of nominal 0.45mm Base Metal Thickness BMT) (0.5mmTCT), Hi-strength steel with min. 550M Pay ield strength, metalli chot dipcoated with Aluminium-Zincalloy (55% aluminium 43.4% zinc 1.6% silicon) with COLOR BOND(R) steel quality super durable polyester paint coat (within organic pigment). The paint shall have at total coating thickness of nominal 35 um, comprising of nominal 25 um exterior coat on top surface and nominal 10um reverse coat on back surface. Profile sheet shall have nom.950-1050 mm effective cover width and nominal 2530mm de eprib swith sub tles quare fluting in the five panat nominal 180-250 mm center-to-center. The end rib shall be designed for anti capillary groove. & returnleg . The feed material should have coil manufacturers product detail smarked are gular interval. Including fastener swith min. fastened with min. 25um Zinc-Tinalloy coated, Hexhead, self-drillings crew etc.complete. (weight of profile 4.52 Kilogram/ One Square Metre)(38.34) Providing & fixing 90x60 cm. granite plate engraving 10cm height letter figures painting with approved colour & shade comp.Spec No.Bd.W 7 page no.586 (44.12)
