Day To Day Maintenance Repair Works Roofs And Wpt In Residential And Technical Area At R And De E Dighi Pune 15; 1 Taking down chowkhat or frames with shutter (without taking off shutters from the frames) n exc 1.5 sqm each make gooddisturbed sarfaces complete all as specified and directed. 2 Ditto- but exceeding 1.5 Sqm but not exceeding 4 Sqmeach make good disturbed surfaces complete all as specified and directed. 3 Taking down shutters of any decription fixed in any position area exc 1 sqm but nexc 2sqm each complete all as specified and directed. 4 Taking down shutters of any decription and refixing the same in any position area exc 1 sqm but nexc 2sqm each complete all as specified and directed. 5 S&Ffactory made pressed steel frames made out from 1.25mm thick steel sheetfor doors of size 125x60 mmwith one or more rebates including necessary fixing lugs holdfast, hinges, lock strike plate, etc.and including treated with tar or coal tar black paint on steel surfaces in contact / embeded in concrete or masonary work including filling hollow portion of frame with PCC 1:3:6 type C-1 complete all as specified and directed. 6 S&Ffactory made pressed steel frames made out from 1.25mm thick steel sheetfor doors of size 105x60 mmwith one or more rebates including necessary fixing lugs holdfast, hinges, lock strike plate, etc.and including treated with tar or coal tar black paint on steel surfaces in contact / embeded in concrete or masonary work including filling hollow portion of frame with PCC 1:3:6 type C-1 complete all as specified and directed. 7 S&F 35 mm thick flush shutters solid core construction with block board core and plywood face panels and one face is covered with decorative face veneer with lipping / frame to match commercial type complete all as specified and directed. 8 S&F Factory Made Solid PVC Moulded Door Shutter witth particle board core, 28 to 30mm thick (style), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face complete all as specified and directed. 9 Supply and fixing for 35 mm thick glazed and skeleton shutters of 2nd class hardwood open rebated and prepared to receive glass, gauge etc, (without sash bars) edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc. size of member of shutter as specified in SSR Pt-I section 8 clause 8.24(a) complete all as specified and directed. Note: Glazing and Wire cloth shall be measured and paid separately 10 S&F PVC door frame of size50x47 made out of 5mm wood grain printed PVC sheet, reinforced with M.S square tube complete all as specified and directed. 11 S&F factory made solid panel PVC shutter 30mm thick (Style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC C channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for styles and plain colour PVC sheet for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail panelling of plain colour PVC sheet to be fitted in MS frame welded/sealed to the style & rails with sutailble PVC sheet beading and jointed together with solvent cement complete all as specified and directed. 12 M&L for preparation of new wooden surfaces and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed. 13 S&F Aluminium handles fabricated type 100 mm complete all as specified and directed. 14 S&F Aluminium handles fabricated type 150 mm complete all as specified and directed. 15 S&F Mild steel cold rolled, Butt hings 100 mm medium weight complete all as specified and directed. 16 S&F Aluminium, anodised barrel tower bolt 150 mm complete all as specified and directed. 17 S&F 250mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed. 18 S&F in repairs 100 mm butt hinges, medium weight, cold rolled mild steel complete all as specified and directed. 19 S&F in repairs 150 mm long aluminium, anodised, or matt finished barrel tower bolts of extruded section complete all as specified and directed. 20 S&F in repairs 150 mm size extruded aluminium alloy bow handles, fabricated type with plate, matt or anodised finish complete all as specified and directed. 21 S&F in repairs floor door stopper 140mm of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed. 22 S&F in repairs Aluminium alloy, anodised sliding door bolt with hasp, staple (Bolt type) and fixing clips of sheet, cast or extruded section or cast aluminium alloy and fixed250 mm complete all as specified and directed. 23 S&F in repairs Aluminium anodised Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and fixed complete all as specified and directed. 24 Taking down existing aluminium door shutter and S&F Double action floor spring hydraulically regulated made upaluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed. 25 S&F in repairs 25mm bore stainless steel 304 grade curtain rods with suitable fancy type brackets and fixed in position using stainless steel screws complete all as specified and directed. 26 M&L for two coat of synthetic enamel paint over one coat of red oxide primer on new steel surface of any description not other wise described over 10 cm width or girth complete all as specified and directed. 27 Dismantling floor, hearth or wall tiling including cement mortar bedding , removing unserviceable tiles out side the MD Land without any extra cost complete all as specified and directed. 28 M&L in repair of25mm thick PCC 1:2:4 type B-0( 12.5 mm graded stone aggre) as in sub base of floor complete all as specified and directed. 29 M&L for 15mm thick screed bed below stone slabs or tiles in CM 1:6 complete all as specified and directed. 30 M&L for rendering 10mm thick as backing coat in CM 1:4 complete all as specified and directed. 31 M&L for Double charged Vitrified ceramic tiles as in flooring and skirting of Light shade 9 to 10mm thick (square/ rectangular) polished area of each tiles size exc 0.11 sqm but N exc 0.36 sqm, 9 to 10 mm thick in floors etc., set and jointed in neat cement slurry and pointed in white or colour cement to match complete all as specified and directed. 32 M&L for coloured non skid ceramic tiles as in flooring of size exc 0.09 and n. exc 0.16 sqm of 9 to 10mmthick set and jointed in neat cement slurry and pointed in coloured pigment complete all as specified and directed. 33 M&L for Glazed ceramic tiles in vertical surface of size 600/450mmX 300mm X7 to 8 mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed. 34 M&L for sheet glass ordinary quality 3 mm thick fix inwindow/vent shutter area n exc 0.50SqM in each panecomplete all as specified and directed fixing new ones by hacking out old broken glassfrom metal frame including punching or drilling out old glazing pins/spring clips complete all as specified and directed. 35 M&L 3 mm th Figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane complete all as specified and directed. 36 S&F in stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks or stainless steelwire staples complete all as specified and directed. 37 S&F in repairsstainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks or stainless steelwire staples complete all as specified and directed. 38 S&F continuous (piano) hinges, mild steel, bright finish or electro galvanised with 40 mm width flaps when open complete all as specified and directed. 39 S & F in repair 18mm thickPVC boardof grade 1st quality of both side plain white colour fixed with screws, solvent cement/adhesive to make kitchen cabinet sides top and bottom, shelves inside the cabinet and shutter or drawercomplete all as specified and directed. 40 S&F in repair 18mm thick prelaminated particle board interior grade, conforming to IS-12823, Gde-I prelaminated both side with decorative choice lamination as in cupboard shutters, Kitchen cabinets etc fixed with screw including 3mm thick, I st class HW(TW) beading all around on edging to timber frame work complete all as specified and directed. 41 S&F in repairs 100mm Hasp and staple, safety type aluminium anodised with mild steel hinge pinincluding bolt to hinge plate and fixed with screws complete all as specified and directed. 42 S&F in repairs alluminium anodised powder coated frame, grills of any design for doors, windows, ventilator with one or more rebates including joining cleat for fixing etc complete all as specified and directed. 43 S&F in repairs anodised aluminium powder coated door shutters, aluminium section weighing 0.55 kg/m with and including necessary joiningcleats, glazing clips, rubber neoprene packing, extruded anodised aluminium alloy fabricated type handles of size 150mm 2 Nos in each door, stainless steel hinges anodised aluminium snap beading for fixing glass panes /other filling material in panels, screws etc complete all as specified and directed. Note :- Glass panes / other filling materials in panels shall be masured and paid separately. 44 S&F in repairs aluminium powder coated window and ventilatorwithside hung shutters with sash bars section weight 0.55 kg/RM, necessary jointing cleat glazing, clip, handles CP hinges, tower bolts etc packing, anodised snap beading, screws complete all as specified and directed. 45 S&F in repairs floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring fixed in floor, over all length of cover plate 150mm complete all as specified and directed. 46 S&F in repairs aluminium (extruded section body) door closer hydraulically regulated, designation No 3 universal type suitable for door shutter of 851 to 1000mm in width and fixed complete all as specified and directed. 47 M&L for 5.5mm thick sheet glass, selected quality and glazing with aluminium beading in square n exc 0.5 sqm. in each pane complete all as specified and directed. 48 Ditto but 5.5 mm thick glass in panes each exc. 0.5 sqm complete all as specified and directed. 49 M&L for removal of trees/plants complete incl roots any dia in any masonary at any height. including applying root killer chemical as per manufacturer’s instructions and making good disturbed portion with PCC 1:2:4 Type B0 (using 12.5 mm graded stone aggregate)in CM 1:3 and finishing the surface to match with existing surface complete all as specified and directed. 50 De-watering from the existing service water tanks of capacity up to 1000 ltrs kept over roof slab/staging of any height and cleaning internal surfaces of tanks to remove the deposited scales, dirt, mud and other foreign materials, rubbing with water using coir/jute brushes and washing the surfaces with fresh water, cleaning the inner surfaces with mixture of bleaching powder and water and finally washing with fresh water including taking down existing float valve and re-fixing the same in position after cleaningincluding writing TANK CLEANED ON (date) on the outer surface of tank complete all as specified and directed. 51 Taking down 15mm bore steel water tubing and connections complete all as specified and directed. 52 S&F 15 mm bore of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittingsto walls/ ceilings or laid in floors complete all as specified and directed. 53 Taking down 20mm bore steel water tubing and connections complete all as specified and directed. 54 S&F 20 mm bore CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings to walls and ceilings or laid in floors complete all as specified and directed. 55 S&F in repairs 32mm dia PVC waste (Flexible) pipes with polyethylene thread union and check nuts for waste pipe of WHB, 32 mm dia complete all as specified and directed. 56 All as per item herein above but 40mm dia suitable for urinals complete all as specified and directed. 57 S&F in repairs 10 liters capacity PVC low level flushing cisternwith ISI marked body complete all as specified and directed. 58 S&F in repairs 100mm dia CP grating for nahani traps with or without hole for waste pipe complete all as specified and directed. 59 S&F in repairs 15 mm dia PTMT ball valve, high pressure with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe complete all as specified and directed. 60 S&F in repairs 20 mm dia PTMT ball valve, high pressure with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe complete all as specified and directed. 61 S&F in repairs 15 mm bore, 45-60 cm long PTMTconnecting pipe fitted withunions to connect GI pipe to PVC pipe on both ends complete all as specified and directed. 62 S&F in repair OH tank cover black of size /shape for water tanks of storage capacity exc 250 ltr but not exc 500 ltr each (with necessary fixing/ lockingarrangement) to suit the existing provision complete all as specified & directed. 63 S&F in repairs concealed spindle half turn/full turnscrewed both ends of size 15mm bore.complete all as specified and directed. 64 S&F in repairs 15 mm bore stop valve of PTMT any colour high pressure screwed for iron pipe and fixed (minimum weight 15mm-90gms/20mm-112gms) complete all as specified and directed. 65 S&F in repairs plastic water closet seat cover white closed pattern, solid type with flat bottom, and cover and mild steel chromium plated hinging device complete all as specified and directed. 66 S&F in repairs brass chromium plated shower rose of 125 mm size with swivel joint including fixing to steel pipe or union complete all as specified and directed. 67 S&F in repairspillar taps 15 mm, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered `Hot or `Cold with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed. 68 S&F in repairs 15 mm bore pillar taps of PTMT any colour high pressure screwed for iron pipe and fixed (Minimum weight 15mm-110gms) complete all as specified and directed. 69 S&F in repairs 15 mm bore bib taps, fancy type cast copper alloy chromium plated, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed. 70 S&F in repairs 15 mm bore bib tap PTMT any colour high pressure screwed for iron pipe and fixed (Minimum weight 15mm 90gms/ 20mm-125gms) complete all as specified and directed. 71 S&F in repairs 600 mm x450 mm beveiled edge mirror of selected quality glass, mounted on 6 mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and washers complete all as specified and directed. 72 S&F in repairs 600 mm x 2.1 mm beveiled edge mirror of selected quality glass, brass screws and washers complete all as specified and directed. 73 S&F in repairs 330 x 430mm PVC body cabinet Mirror and fixing to the wall with suitable screws etc complete all as specified and directed. 74 S&F in repairs Vitreous china squatting pan , ‘Orissa’ pattern, size 530 mm x 440 mm, white with integral foot rests, embedded and set in PCC 1:5:10 type E-2 and making good to floor including removing rubbish off the premises complete all as specified and directed. 75 S&F in repairs, Vitreous China wash down water closet pan, (pedestal pattern), white, with and including plastic water closet seat, white, closed pattern with flat bottom, andcover and mild steel chromium plated or aluminised hinging device, flush pipe for joining etc complete all as specified and directed. 76 S&F in repairs, Vitreous China wash down water closet pan, EWC one piece with flusing cistern CIMBA P one PC EWC with seat cover & fitting (pedestal pattern), white, complete all as specified and directed. 77 S&F in repairs, Vitreous China wash down water closet pan, EWC wall hung EWC with flusing cistern with seat cover & fitting (pedestal pattern), white, complete all as specified and directed. 78 S&F in repair for Vitreous China wash basin, white, flat back, with full pedestal ofincluding necessary brackets, CP couplings, pvc waste pipes etc. complete all as specified and directed. 79 S&F in repair for vitreous China wash basin, white, flat back, size 580x450mm including necessary brackets, CP couplings, pvc waste pipes etc. complete all as specified and directed. 80 S&F in repairs 500 litres capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top), hoisted and fixed in position all as specified in SSR Part-I, connecting up pipes including 15 mm bore ball brass valves, high pressure, with polythene float and fly- nut complete, screwed for iron pipe or brass ferrule complete all as specified and directed. 81 S&F in repairs 1000 litres capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top), hoisted and fixed in position all as specified in SSR Part-I, connecting up pipes including 20 mm bore ball brass valves, high pressure, with polythene float and fly- nut complete, screwed for iron pipe or brass ferrule complete all as specified and directed. 82 S&F in repairs 15mm bore CP brass health faucet of 1.2m long including brass holders, screwed down, screwed for iron pipe or for brass ferrulecomplete all as specified and directed 83 S&F in repairs 15mm bore CP brass two way bib cock, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed 84 S&F in repairs PVC water tank covers suitable for1000 ltrs capacity including conecting clips and fixing screws complete all as specified and directed. 85 S&F in repairs stainless steel sink coupling complete all as specified and directed. 86 S&F in repairs gun metal globe or gate valves with iron wheel head screwed both end for iron pipe and fixed to 20mm bore pipe complete all as specified and directed. 87 Rectifying the defects in plumbing and sanitery fittings such as water taps, stop valves, pillar tap,waste coupling/pipes, foot valve, flush tank, WC seat cover, showers, PVC connection, GI tubing, WHB, WC, Water Tank fixing etc by removing loose fittings and fixture and rectifying defects and refixing the same in position complete all as specified and directed.NOTE: i) The unit rate quoted shall be demed to be included the elements of labour only for rectifying and making the fittings and fixture functional. If replacment of part/items is required to make the fitting functional,the cost for labour and material for the same will be easured and paid for as S&F in repairs under relevent items of this schedule here in after and in such cases this item will not be measured and paid for. (ii) The unit rate quoted by the contractor shall be inclusive of working & attending the complaints as diected by JE(Civil) or Engr in Charge. (iii) The plumber who is on duty must be provided with common mobile cell to faciliate and render good services to the users (iv) Complaints slip to be collected daily from complaints cell/AGE B/R Dighi. (v) Contractor shall provided all the necessary labour tools/Ladder and make necessary transportion arrangements etc required for attending complaints with proper tool bag. 88 Taking down door/ window/ventilator/shutter/cub board and casing and refixing the same in same opening, refixing of hardware items such as aldrop bolt, tower bolt, handles, Hasp& hydroulic staple, butt hinges, spring fingers, door closer, piano, hinges etc by removing broken screws, nail etc and providing new screw/nails, repairs to kitchen shelves, partition, curtain rods, pelmet boxes, steel windows handle slag by screwing/nailing etc tighting of loose members of Aluminium door, windows/ventilator including tighting rubber beeding etc. tightening of ceiling member & sheets, loosing/Tightning sheets window, ventilator, etc, complete all as specified and directed. NOTE: i) The unit rate quoted shall be demed to be included the elements of labour only for rectifying and making the fittings and fixture functional. If replacment of part/itmes is required to make the fitting functional, the cost for labour and material for the same will be easured and paid for as S&F in repairs under releventitems of this schedule here in after and in such cases this item will not be measured and paid for. (ii)The unit rate quoted by the contractor shall be inclusive of working & attending the complaints as directed by JE(Civil) or Engr in Charge. (iii) The Carpenter who is on duty must be provided with common mobile cell to faciliate and render good services to the users (iv) Complaints slip to be collected daily from complaints cell/AGE B/R Dighi. (v)Contractor shall provided all labour/ tools/ Ladder, with necessary transportion arrangements etc required for attending complaints with proper tool bag. 89 S&F in repair PVC floor trap/nahani trap incl stainless steel gratings, 75 mm dia outlet, including jointing to waste pipe fixed in cement concrete type B1(1:2:4) complete all as specified and directed. 90 M&L for Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth complete all as specified and directed. 91 Supply and fix in repairs Vitreous China urinal bowl type, withdischarge pipe (excluding flushing cistern, flush pipe and waste pipe) (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; with brackets, flush pipe and Union for discharge pipe complete all as specified and directed. 92 Supply and fix in repairs Vitreous China bowl urinal full stall type, withdischarge pipe (excluding flushing cistern, flush pipe and waste pipe) (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; with brackets, flush pipe, and Union for discharge pipe complete all as specified and directed. 93 Supply and fix in repairs 15mm bore chromium plated urinal spreader complete all as specified and directed. 94 Demolition of concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed. 95 M&L for 75mm thick plain cement concrete 1:3:6 type C2 using 40mm graded stone aggregate in plinth protections/ path including necessary form work complete all as specified and directed. 96 Cleaning the Accessable/Inaccessable roof tops/Terraces etc including removing of Silt/Sand accumulated, small plants and leaves, mud etc. blocking the rain water pipes including removing the rubbish from roof tops, out side the MoD land.(Residential & Technical bldgs of R&DE(E)) complete all as specified and directed.(a) Area exc 50Sqm to n.exc 200Sqm 97 (b) Area exc 200Sqm to n.exc 500Sqm 98 (c) Area exc 500Sqm to n.exc 1000Sqm 99 M&L for rendering 15 mm thick in cement mortar 1:3 with using water proofing compound @ 3% by weight of cement, surface finished even and smooth without using extra cement complete all as specified and directed.Note: WPC shall be measured and paid separately. 100 M&L applying coat of industrial bitumen85/25 at the rate of 1.20 kg/sqm including cleaning the existing plaster/concrete surfaces of sunken portion complete all as specified and directed. 101 M&L for PCC 1:5:10 type E2 as in filling under floor complete all as specified and directed. 102 M&L for brushing neat cement slurry with 3.0 kg of cement per sq. meter complete all as specified and directed. 103 Taking downcement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed. 104 M&L for Rendering 10mm thick on fair faces of brick work or concrete surfaces in CM 1:4 and making the surface even and fair without using extra cement complete all as specified and directed. 105 M&L for Rendering 20mm thick on fair faces of stonework or concrete surfaces in CM 1:4 and making the surface even and smooth without using extra cement complete all as specified and directed. 106 M&L for preparation of newly cement plastered wall surface andapplying two coat of oil bound distemper over chalk whiting, on plastered surfaces, preparatory to distempering and a coat of primer complete all as specified and directed. 107 M&L for preparation of old distempered surfaces of wall and applying one coat of oil bound distemper etc complete all as specified and directed. 108 M&L for preparation of old distempered surfaces of wall and applying two coat of oil bound distemper complete all as specified and directed. 109 M&L for preparation of old distempered surfaces ofceiling surfaces applying one coat of oil bound distemper etc complete all as specified and directed. 110 Complete removal of existing treatment including Washing, rubbing down and stopping etc distembered wall surfaces and M&L for two coats of distemper oil emulsion over a coat of primer includingwall care putty to make surface even and smooth,preparatory to distempering, priming plastered and other surfaces on existing plastered surface complete all as specified and directed. 111 M&L for preparation of old painted surfaces of wood and wood based surfaces of anydescription over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. 112 M&L for preparation of old painted surfaces of steel & iron of any description over 10cm width or girth and applying one coat of synthetic enamel paint (1st quality) etc complete all as specified and directed. 113 Demolition of cement concrete in Roofs, floors (other than ground floors) of any thickness etc including removing existing water proofing treatment (any number of layers) etc complete all as specified and directed. 114 M&L for providing, cement concrete type B0 1:2:4 (12.5 mm gde Agg) on as level course of roof/ chajja kerbs and making the surface even and smooth complete all as specified and directed. 115 Supplying and applying waterproofing treatment to sound, moisture free concrete surface. System includesproper surface preparation to remove loose dust, dirt, loose mortar, curing compound etc., carry out cementitious injection grouting at leakage points and construction joints using cement slurry modified with Cebex 100-Plasticised expandive grout admixture supplied in 225 gm pouch, treatment of construction joints using polymer modified mortar prepared by using Nitobond SBR Latex, application of polymer modified vatta at floor-wall junction, filling of annular space around rain water outlet using Conbextra GP2 - Non-shrink cementitious grout. any undulated surface and pot holes shall be filled with Epoxy mortar to obtain sound/levelled surface. Application of primer Nitoproof WB Primer on sound mother slab surface. Followed by application of two coats of Nitoproof 600PF -Liquid applied single component pitch free polyurethane coating supplied in 25 kg drum coverage @ 2.3 kg/m2 to achieve 1.5 mm thickness in two coats complete including all tools and tackles as per manufacturer’s specifications. Coating shall be havingcrack bridging of 2 mm, Elongation (ASTMD 412) > 600 %, Tensile Strength (ASTM D412) – 2.5 N/mm2, Recovery from Elongation (ASTM D412) – 95 %, 85% Solid Content, Tear Resistance (ASTM D624) – 15 Kn/m,Shore A Hardness (ASTM D2240) – 60,Water vapour transmission not more than 1g/m2/hr, Water Permeability (DIN 1048) – Nil, Service Temperature – -40°C to 70°C, Flash Point > 70 °CHSE Guidelines: It is recommended to provide adequate general and local exhaust ventilation, provide protection to eye, face, hand and other skin by wearing appropriate gloves, goggles, face shields, respiratory protection etc. as directed in SDS of the product. 116 Supply only integral Waterproofing compound complete all as specified and directed. 117 Supplying and laying seperation & protection layer- Geotextile membrane 150 gsm prior to protection screed complete all as specified and directed. 118 Taking down/refixing of top hood cover from existing rolling shutters after greasing , over oiling of all the components for easy operation re-alignment of guide channels bearing and tension spring, making good locking arrangement including cleaning etc complete all as directedArea n exc20 Sqm complete all as specified and directed. 119 Taking down/refixing of top hood cover from existing rolling shutters after greasing, over oiling of all the components for easy operation r-ealignment of guide channels bearing and tension spring, making good locking arrangement including cleaning etc complete all as directedexc 20 Sqm but n exc 30 Sqm each complete all as specified and directed. 120 Taking down/refixing of top hood cover from existing rolling shutters after greasing , over oiling of all the components for easy operation re-alignment of guide channels bearing and tension spring, making good locking arrangement including cleaning etc complete all as directed Area exc 30 Sqm butn exc 40 Sqm complete all as specified and directed. 121 Taking down/refixing of rolling shutter of any description (With all components) and in any size and removing from site area up to 15.00 Sqm each complete all as specified and directed. 122 Taking down/refixing of rolling shutter of any description (With all components) and in any size and removing from site area exc 15.00 Sqm but n exc 25.00Sqm complete all as specified and directed. 123 Supply and fix in repair Steel rolling shutters, Thickness of latch 1.00mm thick without ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete manual type, errected in position complete all as specified and directed. 124 Supply and fix in repair Steel rolling shutters, Thickness of latch 1.00mm thickwithout ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete: but gear operated type with bevel gear box and crank handle errected in position complete all as specified and directed. 125 S & F in repairs for ball bearings for rolling shutterrs complete all as specified and directed. 126 S&F PVC sheet hollow wall panelling with back side Steel fillet of width 35mm inclusive of fixing on to wall to make PVC frame complete all as specified and directed.
