Tender For Additional / Alternator To Building No P 721 P 724 In A Zone. Additional / Alternator Of Toilet Near Bldg No T 34 35 Bcd Jco Living Toilet In M Zone And Addn Altn Of Toilet Block At Bldg No T 4 Bcd In I Zone At Rms; 1 Demolition of cement concrete (unreinforced) in ground floors and paving n.exc. 15cm thick (below or above ground level) and removal of rubbish from the site complete all as specified and as directed. 2 Taking down chowkhat or frames not exc 1.5 Sqm each (without taking off shutter from the frame) complete all as specifed and as directed. 3 M&L for brick work with sub class B bricks(using old size burnt bricks) straight or curved on plan exc 6 m mean radius in CM (1:6) including demolition of old brick work complete all as specified and as directed. 4 M&L for brick work with sub class B bricks(using old size burnt bricks) straight or curved on plan exc 6 m mean radius in CM (1:6) complete all as specified and directed. 5 M&L for non skid colouredtiles 7 to 8 mm thick area of each tile exceed 0.18 sqm but not exc 0.38 sqm ,as in floor etc. set and jointd in neat cement slurry and pointed in white or coloured cement to match the shade of tiles , laid over and including screed bed or bedding layer of mortar 15 mm thick for laying floor finishes CM (1:4) including dismantling of old floor, hearth or wall tiling including cement mortar bedding complete all as specified and as directed. 6 M&L for Non skid ceramiccoloured tiles of 7 to 8mm thick light colour (Square / rectangular) ,area of each tileexceeding 0.06 sqm but not exceeding 0.11 sqm as in floors laid over and including 15mm thick screed bedfor laying floor finishes in CM (1:6), set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tilesincluding dismantling of old floor, hearth or wall tiling including cement mortar bedding complete all as specified and as directed. 7 M&L for Glazed ceramic colour tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the shade of tiles laid over and including 10mm thick CM (1:4) backing coatincluding dismantling of old floor, hearth or wall tiling including cement mortar bedding complete all as specified and as directed. 8 M&L for non skid colouredtiles 7 to 8 mm thick area of each tile exceed 0.18 sqm but not exc 0.38 sqm ,as in floor etc. set and jointd in neat cement slurry and pointed in white or coloured cement to match the shade of tiles , laid over and including screed bed or bedding layer of mortar 15 mm thick for laying floor finishes CM (1:4)complete all as specified and directed. 9 M&L for Non skid ceramiccoloured tiles of 7 to 8mm thick light colour (Square / rectangular) ,area of each tileexceeding 0.06 sqm but not exceeding 0.11 sqm as in floors laid over and including 15mm thick screed bedfor laying floor finishes in CM (1:6), set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles etc complete all as specified and directed. 10 M&L for Glazed ceramic colour tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the shade of tiles laid over and including 10mm thick CM (1:4) backing coat etc complete all as specified and directed. 11 S & F for4 mm thick of size 600x600mmHSPC (high pressure Steam Cured) pre-primetered self embossed, textured designer boardE-Board Classic to be fixed GI grid/section size 600mmx600mm with main runner 38x24x0.9mm thick ,cross tee 28.6x24x0.9 mm and wall angle 19x19xo.9 mmduly suspended with 2mm dia GI bar hangers 1200mm centre to centre both ways fixed with steel dash fasteners or from purlin from the roof with alignment clip including providing provisions for light fixtures of any size and finally applying two coats of oil bound distemper etc complete all as specified and directed. 12 S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 MPa as in roof covering/cladding to wall, fixed with self tapping screws as including dismantling of old plain or corrugated steel sheeting complete all as specified and as directed 13 S&F pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws including dismantling of old plain or corrugated steel sheeting complete all as specified and as directed 14 S&F mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm, fixed with tinned tacks or galvanized wire staples complete all as specified and as directed 15 S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, suppling & fixing in opening complete all as specified and as directed 16 S&F Factory made solid panel PVC door shutter 30mm thick (stile) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded palin colour PVC `C channel heaving a PVC sheert strip of 20mm width suck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bbottom rail; panelling of plain colour PVC sheet to be fitted in the M.S. frame wedded/ sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, suppling & fixing in the frame at site including nacessary fittings complete all as specified and as directed 17 S & F 100 size stainless steel butt hinges complete all as specified and as directed 18 S & F 150 mm Aluminium handles, cast type, anodised complete all as specified and as directed 19 S & F150 mm Aluminium, anodised, barrel tower bolts of extruded section and fixed complete all as specified and as directed 20 S & F200 mm Aluminium, anodised, barrel tower bolts of extruded section and fixed complete all as specified and as directed 21 M & L rendering 15mm thick in cement mortar (1:4) on brick or concrete work finished the surface even and smooth without using extra cement including taking down old plaster complete all as specified and as directed. 22 M & L rendering 15mm thick in cement mortar (1:6) on brick or concrete work finished the surface even and smooth without using extra cement including taking down old plaster complete all as specified and as directed. 23 M & L rendering 15mm thick in cement mortar (1:4) on brick or concrete work finished the surface even and smooth without using extra cementcomplete all as specified and as directed. 24 M & L rendering 15mm thick in cement mortar (1:6) on brick or concrete work finished the surface even and smooth without using extra cementcomplete all as specified and as directed. 25 M&L for preparation of new or previously untreated steel surface and applying two coats of synthetic enamel paint over a coat of red oxide primer of surface exc. 10cm width or girth complete all as specified and as directed. 26 M&L forpreparation of new plasteredsurfaces of walls and applying three coats of white wash completeall as specified and directed. 27 Material and labour for preparation of new external surfaces of walls including cornices, plasters etc (Plastered or un plastered surfaces) and applying two coats of cement paint over a coat of primer complete all as per manufacture instructions all as specified and as diredted by Engineer-in-Charge . 28 M&L for 75 mm thick PCC (1:3:6) ,type C-2 , (using 40 mm graded stone aggregate)as in plinth protection laid to slope of (1:12), finished fair and even without using extra cement with and including all necessary formwork to divide that area in panels, finishing exposed edges fair or rounding or chamfering where directed and providing 10 mm wide joints throughout thickness of plinth protection duly filled with mastic filling (one part of hot bitumen 85/25 and three part of fine sand by weight) etc complete all as specified and as directed. 29 Taking up or down steel tubing 15mm bore and connection including fittings and removal to store complete all as specified and as directed. 30 Taking up or down steel tubing 20mm bore and connection including fittings and removal to store complete all as specified and as directed. 31 S&F 15 mm diaUnplasticised PVC pipes of pressure rating 10 kgf/sqcm fixed complete to walls, ceilings or in floors etc., any type of pipe complete all as specified and as directed. 32 S&F 20 mm dia Unplasticised PVC pipes of pressure rating 10 kgf/sqcm fixed complete to walls, ceilings or in floors etc., any type of pipe complete all as specified and as directed. 33 S&F vitreous china half stall urinalwhite, with grating and union for discharge pipe including waste pipe of polythelene of low or high density or PVC 32mm dia and including Urinal spreader of PTMT any colour for fixing with 15 mm dia pipe(Minimum weight 60gms)& 32 mm waste coupling of PTMT (half or full threaded)complete all as specified and as directed. 34 S&F in repairs 10 ltrs capacity PVC valveless syphonic action type flushing cistern low level with inlet ball valve float and handle complete all as specified and as directed. 35 M&L 15mm thick plastering in CM (1:4) on one side of lathing in two separate layers without using extra cement but using water proofing compound @ 3% by wt of cement and surface finished even and smooth including demolition of reed, lathing single or double, including battens and plaster or chicken wire lathing with and including M&L for GI wire netting 0.71 mm dia and 12 mm mesh lathing in to reed in walls incl all laps cutting and waste complete all as specified and as directed.Note:-WPC will be measured and paid separately. 36 M&L for rendering 12 mm thick in CM (1:6) on other side of lathing surface finished even and smooth without using extra cement complete all as specified and as directed. 37 M & L for 40mm thick PCC,(1:2:4) type B-1 (using 20mm graded stone aggregate) as in sub floor, sub base and paving complete all as specified and as directed 38 M&L for rolled mild steel in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc conforming to Fe 410-W (Gde-E 250) quality-A complete all as specified and as directed 39 S&F in repairs rotational moulded polyethylene 1000 Ltrs Capacity water storage tanks double layer (cylindrical vertical with closed top) hoisted and fixed in position ,including ball brass valve, with polythelene float and fly nut complete screwed down for iron pipe of 20 mm dia complete all as specified andas directed. . 40 S&F CP Health Faucet with 1 mtr metalic Expandable tube & hook complete all as specified and directed. 41 S&F PVC (SWR) floor trap plain with grating including jointing with solvent cement complete all as specified andas directed. . 42 M & L Vitreous china ware wash down water closet pan (EWC), pedestal pattern coloured including plastic WC seat black closd pattern eith flat bottom and cover and mild steel chromium plated of aluminised hinging device, complete fiting complete all as specified andas directed. . 43 M&L for precast cement concrete type B-1 (1:2:4)(Using 20 mm graded stone aggregate) as in cover slabs, manhole cover, chamber cover and drainge cover set in cement mortar 1:6 including necessary formwok complete all as specified and as directed. 44 S&F in repairfor vitreous china squatting pan, Orissa, pattern size 580 x 440 mm white with integral foot rests(excluding flushing cistern and flush pipe)including connection to trap and to flushing pipe, anti-syphonage pipe etc complete including making good to floor ccomplete all as specified and as directed. 45 S&F vitreous china wash basin, size 550 x 400mm white including brackets, and waste coupling & pipe of 32mm dia, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other and fixed complete all as specified and as directed. 46 S&F in repair pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered hot or cold with long screwed shqanks and flynuts, screwed for iron pipe 15mm dia complete all as specified and as directed. 47 S&F in repairs 600mm x 450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and as directed. 48 S&F bib cock CP with wall flange, fancy type 15 mm dia bore complete all as specified and as directed. 49 S&F angular stop cock CP with wall flange, fancy type 15 mm bore dia complete all as specified and as directed. 50 S&F grating down 100mm dia with waste hole of PTMT (Min wt 25 gms) complete all as specified and as directed.. 51 S&F in 600mm long tubular towel rail brass chromium plated 20mm dia, D type 60cm longfixedwith two plugs (Gutties) of 2nd class hard wood embeded in cement mortor 1:3 with MS screws complete all as specified and as directed. 52 M&L for vitreous china squatting pan, Orissa, pattern size 580 x 440 mm white with integral foot rests(excluding flushing cistern and flush pipe)including connection to trap and to flushing pipe, anti-syphonage pipe etc complete including making good to floor complete all as per specified and directed. 53 S&F 110 mm dia PVC P trap complete all as specified and as directed. 54 S&F for PVC (SWR) 110mm dia single socketed in any length with rubber ring joints laid in trenches or in floor complete all as specified and as directed. 55 S&F PVC (SWR) 110mm dia bends in any radius complete all as specified and as directed. 56 M&L for second class hardwood as in scantlings clean sawn timberfixed includingdismantling of old unsv timber scantlings etc complete all as specified and as directed. 57 M&L for brick work with sub class B bricks(using old size burnt bricks) straight or curved on plan exc 6 m mean radius in CM (1:4) complete all as specified and directed. 58 M&L for chequered cement concrete tiles of size not less than 300x300x25mm thick laid over and including 15mm thick screed bedfor laying floor finishes in cement mortar (1:6) etc, set, jointed and pointed in neat cement slurry with grey cement and pigments complete all as specified and directed. 59 S&F in repair soap dish chromium plated stell/stainless steel, approx size 160x160mm x 1mm thick, fixed to walls with plugs & CP brass screws complete all as specified and as directed. 60 M&L for preparation of new wall surface and two coats of cement base paint over a coat of primer on walls complete all as specified and as directed. 61 M&L for preparation of old wall surface and applying one coat of cement base paint on walls complete all as specified and as directed. 62 M&L for applying two coats of oil bound distemper over a coat of primer over a coat of 2mm thick wall care putty(in two layers) on new plastered surfaces of walls including preparation of newsurface complete all as specified and directed. 63 M&L for applying one coat of oil bound distemper on old plastered surfaces of wall complete all as specified and as directed. 64 S&F framed work as in doors or gates of angle or other section with gusset plates, rails,braces,etc.,complete drilled for fixing of steel sheeting or other covering.Doors,etc.to be prepared for hanging or sliding with and hinges or steel hanging door fittings (exclusive of steel ,sheeting or other covering,running rails and guides) and hanging;also fastening and fixing complete.Fe-410 W (Gde E250) quality A complete all as specified and as directed. 65 S&F Pressed steel frames of size 125 X 60mm (Thickness of MS Sheet 1.25mm) for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate,with and including filling hollow of frame with PCC (1:3:6) type C-0 (using 12.5 mm graded stone aggregate) complete all as specified and directed. 66 S&F factory made30mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed. 67 S&F Aluminium alloy anodised sliding door bolt with hasp and staple (bolt type fixing clips of sheet cast or extruxded section(300 mm long) complete all as specified and directed. 68 M&L for preparation of new untreated wooden surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink wood primer complete all as specified and as directed. 69 S&F Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing complete all as specified and as directed. 70 S&F for anodised aluminium powder coated any colour window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/mincluding necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws complete all as specified and as directed. 71 M&L for RCC,M-20 design mix as in lintels over 1.5m span complete all as specified and as directed. 72 Use and waste of form work to sides of lintel etc with rough finished surfaces of concrete flat complete all as specified and as directed. 73 M&L for mild steelTMT bars 10 mm dia and over, cut to length, bent to shape required including cranking required and binding with and including mild steel wire(annealed) not less than 0.9mm dia or securing with clips quality confirming to Fe-410 Gde E-250for stretched wire complete all as specified and as directed. 74 M&Lfor mild steel TMT bars 6 mm to 8 mm dia cut to length, bent to shape reqd incl cranking, bending and binding with MS wire n.exc 0.90 mm dia (annealed) for stirrups/binders complete all as specified and as directed. 75 S&F 20 mm dia 3-layer PP-R Polypropylene random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded p o l y p r o p y l e n e random fittings fixed complete to walls, ceilings or in floors complete all as specified and as directed. 76 Material and labour for (concelaed Type) point wiring including necessary chases cutting of wall for one light/fan/call bell point with 1.5 sqmmPVC insulated (FR-LSH) PVC sheathed multistranded copper conductor cable 1100 volts gradecontrolled by one way switchincluding 1.5 sqmm PVC (FR-LSH) insulated unsheathed copper cable multistrand conductor 1100 volts grade for continuity earth wire connected to common earth dolly drawn through and including PVC conduit with all accessoriesand sunk GI box for mounting of fittings like switch, socket and fan regulator etc and making good the distrubed surfaces as per the existing complete all as specified and as directed by the Engr-in-Charge 77 Onelight pointcontrolled by one, one way switch . 78 One Ceiling fan/ exhaust fan point controlled by one, one wayswitch. 79 One 3 pin socket outlet 5 Amps on the Independent board. 80 All as per item No- 76.00 here-in-before but with 2.5 Sq mm for 3 pin 15 Amps socket point controlled by one switch on independent board and 2.5 Sq mm copper conductor green in colour as earth continuity conductor connected to common earth dolly complete all as specified and as directed. 81 S&F Switch Piano, flush type single pole, one way 5 Amps complete all as specified and as directed. 82 S&F Switch Socket combination, 2 in 1, 5 pin 6A flush type complete all as specified and as directed. 83 S&F Switch Socket combination, 2 in 1, 5 pin 6A/16A flush type complete all as specified and as directed. 84 M&L for Point wiring in repairs for Onelight/fan pointcontrolled by one, one way switch complete with two runs of 1.5 sqmm single core PVC insulated FR-LSH cable1100 volts grade with multi-stranded copper conductors, drawn throughand including PVC double locked Casing & caping/PVC Conduit pipe including provision of 1.5 sqmm, FR-LSH, PVC insulated copper cable as earth continuity conductor connected to common earth dolly, including PVC rectagular box for mounting switches / sockets / regulators etc. as required at site complete all as specified and as directed. 85 All as per item No 81.00 here-in-before but with 2.5 Sqmm for 3 pin 15 Amps switch socket point on independent board along with one run of 2.5 Sqmm copper conductor green in colour as earth continuity conductor connected to earth dolly complete all as specified and as directed. 86 M&L for sub main wiring with two runs of 4.0 Sq mm and one run of 4.0 Sq mm for earth wire with multi standard copper conductors FRLSH quality, 1100 volts grade, drawn throughand including non metalic rigid PVC conduit with all conduit accessories (including concealing and making good to the disturbed surfaces of walls, ceiling,floors etc. including making good the disturbed surfaces and paint touch up to match with the existing surface) complete all as specified and as directed. NOTE:- two runs of 4.0 Sq mm + one run of 4.0 Sq mm and one run of PVC Conduit and its accessories of suitable size shall be measured as one unit length.(Main DB to Sub DBs) 87 M&L for sub main wiring with four runs of 10.0 Sq mm and one run of 10.0 Sq mm for earth wire with multi standard copper conductors FRLSH quality, 1100 volts grade, drawn throughand including non metalic rigid PVC conduit with all conduit accessories (including concealing and making good to the disturbed surfaces of walls, ceiling,floors etc. including making good the disturbed surfaces and paint touch up to match with the existing surface) complete all as specified and as directed. NOTE:- four runs of 10.0 Sq mm one run earth wire 10.0 Sq mmPVC Conduit and its accessories of suitable size shall be measured as one unit length.(for conveyer belt) 88 M&L for sub main wiring with two runs of 2.5 Sq mm and one run of 2.5 Sq mm for earth wire with multi standard copper conductors FRLSH quality, 1100 volts grade, drawn throughand including non metalic rigid PVC conduit with all conduit accessories (including concealing and making good to the disturbed surfaces of walls, ceiling,floors etc. including making good the disturbed surfaces and paint touch up to match with the existing surface) complete all as specified and as directed. NOTE:- two runs of 2.5 Sq mm + one run of 2.5 Sq mm and one run of PVC Conduit and its accessories of suitable size shall be measured as one unit length.( for flood light) 89 M&L for sub main wiring with two runs of 1.5Sq mm and one run of 1.5 Sq mm for earth wire with multi standard copper conductors FRLSH quality, 1100 volts grade, drawn throughand including non metalic rigid PVC conduit with all conduit accessories (including concealing and making good to the disturbed surfaces of walls, ceiling,floors etc. including making good the disturbed surfaces and paint touch up to match with the existing surface) complete all as specified and as directed. NOTE:- two runs of 4.0 Sq mm + one run of 1.5 Sq mm and one run of PVC Conduit and its accessories of suitable size shall be measured as one unit length.(for wallmounting fan) 90 M&L for replacement 20W LED, 4, Wall mounted LED batten, extruded aluminium heat sink provided for efficient heat dissipation & integrated electronic driver.etc with all accessories internally pre-wired and fixing the same and connecting upwith flexible copper cable from ceiling rose to the light fitting complete all as specified and as directed. 91 All as per item No 87 above but 10 watt LED 2, wall mounted with polycarbonate housing/batten. 92 S&F ceiling rose 3 terminal PVC/Polycarbonate isolated body complete all as specified and directed. 93 Supply , fixing and testing in replacement of LED Bldg Security light fitting of capacity 25 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete including 1.2 mtr GI bracket of 25mm bore light grade bent to shape and fixed on wall with metal fastners 2 Nos 10mm dia incl drilling of holes as reqd and connecting up with flexible copper cable of size 0.75 sqmm 3 core from ceiling rose to the light fitting and complete all as specified and directed by Engr-in-Charge 94 Supply, Fixing and testing of vertical type wall mounted storage water heater of Capacity 25 Ltrs BEE 5 Star rated or minimum Standing Loss of 0.511 kWh , 240V, 50Hz with Maximum power consumption of 2KW , dry powder fero glass line coating technologyfor inner tank with incoloy heating elementwith minimum4 years warranty , ABS outer body , 2 units of PVC connection pipe with length of 450mm length for hot and cold water supply with complete Accessories complete all asspecified and as directed. 95 Supply and laying tubes Medium grade galvanised GI tubing with all fittings, fixed complete to walls/poles/laid in floors/trenchs/road crossing of size 15 mm dia bore complete all as specified and as directed. 96 S&F Stop valves, cast copper alloy, fancy type, chromium plated screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed all as per specified and as directed. : Make : Jindal/Prakash surya/TATA 97 S&F15mm boreBib tap fancy type chromium plated with long shank complete all as specified and as directedMake: Jindal/Prakash surya/TATA 98 M&L for making opening in wall ofsuitable size for fixing exhaust fan 450 mm sweep and other connected works includng making good the disturbed surfaces by plastering and painting to match the existing surface on wall of any masonary complete all as specified and as directed. 99 S&F in repairs VTPN DPX 4 way,double door 415 Volts, 50 Hz, IP 43 IK 09 sheet steel, powder painted, with02 neutral link & 02 earth bar and cable ties for cable managementsuitablefor fixing ofMCCB asincomer and MCB SP/TP as outgoing MCB DBs incl taking down of old UNSV DBs and making good the disturbed surfaces to match with existing specification , complete all as specified and as directed..Note : MCBs will be measured and paid separately. 100 S&F in repairs MCCB 4 Pole, 415 V, Adjustable type, 100 Amps with breaking capacity 16 KA complete all as specified and as directed. 101 S&F MCB Distribution board double door type SPN 4 way, sheet steel, powder painted, with bus bar neutral link & earth bar etc. and fixing MCBs of various rating capacity complete all as specified and as directed. 102 S&F MCB Distribution board double door type SPN 8 way, sheet steel, powder painted, with bus bar neutral link & earth bar etc. and fixing MCBs of various rating capacity complete all as specified and as directed. 103 S&F MCB SPN 40 Amps, 230 volts, 50 Hz suitable for fixing in MCB DB C seriescomplete all as specified and as directed. 104 S&F MCB SP 5-32 Amps, 230 volts, 50 Hz suitable for fixing in MCB DB C seriescomplete all as specified and as directed. 105 S&F MCB TPN 63Amps, 230 volts, 50 Hz suitable for fixing in MCB DB C series complete all as specified and as directed. 106 Supply and fix exhaust fan, steel bodyAC single Phase. 230V of size 450mmsweep with blades, and frame andlouvers complete all as specified and as directed. 107 Supply and fixing Wall mounted fan 400 mm sweep PP Blade and thermal overload protection for long lasting motor power consumation 58 Watt fan motor speed 1330 RPM Air dilivery 85 (CMM) with accessories complete all as specified and as directed by Engr-in-Charge. 108 Supply and fixing LED flood light 70 watt 230 VAC outdoor type with thermal management inmultiple optics and equipped with IP66 protection, with impact and corrosion resistantcomplete with driver and lamp complete all as specified and as directed. 109 Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m depth and getting out in soft/ loose soil complete all as specified and as directed. 110 Returning filling in trenches including spreading leveling watering and well ramming in layers not exceeding 25 cm thick complete all as specified and as directed. 111 Removing of excavated material not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point all complete all as specified ans as directed. 112 M&L for spread fine river sand in trenches complete all as specified ans as directed. NOTE: Punned down thickness shall be measured and paid. 113 Supply & laying tubes light grade galvanised, with all fittings, fixed complete to walls, poles, ceilings or laid in floors/ trenches/ road crossing for protection of cables of size 40 mm dia bore including taking down corroded GI tubing complete all as specified and as directed. 114 M&L for laying brick sub class B old size burnt bricks for cable protection of size 230mmx115mmx75mm complete all as specified and as directed 115 M&L for laying of LT UG cable, XLPE insulated, galvanised steel strip or wire armoured, heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area of25 sq mm, 4 core complete all as specified and as directed. NOTE :- (i) Excavation and earth work, sand cushioning, cable protection cover, pipe etc. shall be measured and paid seperately under relevant items. 116 M&L for laying of LT UG cable, XLPE insulated, galvanised steel strip or wire armoured, heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area of 10 sq mm, 2 core complete all as specified and as directed. NOTE :- (i) Excavation and earth work, sand cushioning, cable protection cover, pipe etc. shall be measured and paid seperately under relevant items. 117 Material & labour for cutting/ digging of existing Hard surface of cement concreet/Bituminous road of size not less than 45 cm in width and 20 cm deep for laying of LT cable& making good to the disturbed surfaces by providing PCC or same material after laying of pipe line and returning filling of soil complete all as specified and as directed. 118 M&L for earthing complete with galvanized steel earth plate electrode of size 600x600x6mm thick buried directly in ground (earth pit not less than 2.25m deep below the normal ground level) with top edge of the earth plate not less than 1.5 mtr below normal ground level connected to galvanised earth lead wire 4 mm dia as earth lead connectd by means of bolts, nuts, washers and check nuts all as shown in electrical plate No 3 of MES SSR Part-I, including testing on completion complete all as specified and as directed. NOTE:- (i)The unit rate shall also included for earth work in hard/ dense soil, PCC (1:3:6) type C1 chamber, CI cover 10 m thick, funnel with GI watering pipe 20mm dia Medium grade, GI protection pipe light grade 15mm dia and wire mesh complete in addition to item No 1 (a) to (e) of preamble (notes) under sub heading earthing, specified on Sl Page No 441 of MES SSRPart-II. (ii)Earthing lead and GI protection pipe beyond 7.5m will be measured and paid separately.
