Tender For Day To Day Maintenance Including Certain Other Misc Works, Joinery And Internal Wiring To Md And Otm Accn At Coochbehar Mil Stn Under Ge (S) Binnaguri.; 1 Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories) complete all as specified. 2 Taking down chowkats or frames with shutters (with out taking off shutters from the frames) area not exc 1.5 Sqm each and macking good distrubed surface and finished as per existing srufaces complete all as specified. 3 Taking down aluminium door/ window shutters any size and refixing in the same opening after repair/replacement of defective accessories/any part like handle, hinges, tower bolt, beading, rubber packing, lock, any aluminium shutter part, screws, door stopper, glass etc. upto the complete all as specified.Notes:(i) Glass shall be measured and paid separately under relevant item as supply only.(ii) The quoted rates shall be inclusive cost of handle, hinges, tower bolt, beading, rubber packing, lock, any aluminium shutter part, screws, door stopper and nothing extra shall be admissible on this account. 4 Dismantling of plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified 5 Dismantling timber scantlings 40 sqcm and over in section, in any position unframed work complete all as specified. 6 Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/ slabs/ blankets, any thickness, including cover fillets complete all as specified. 7 Taking up or down 15 mm bore steel tubing and connections, including cleaning for refixing etc complete and makinggood disturbed surfaces of walls/ceilings etc complete all as specified. 8 Taking up or down 20 mm bore steel tubing and connections, including cleaning for refixing etc complete and makinggood disturbed surfaces of walls/ceilings etc complete all as specified. 9 Taking down chowkat with shutter exc 1.5 sqm and n.exc. 4.00 sqm each (without taking off shutters from the frame) and making good distrubed surfaces with PCC (1:2:4) type B1 for holdfast, rendring in CM (1:4) and match as per existing surfaces finisheses complete all as specified. 10 Taking down of wooden door shutter of any description area exceeding 1 sqm and n.exc. 2 sqm each complete all as specified. 11 Dismantling floor hearth or wall tiling including cement mortar bedding (incl backing) removing serviceable tiles to store and rubbish off the premises complete all as specified. 12 Demolition of cement concrete (un-reinforced) in ground floor and paving not exc. 15 cm thick (Below or above ground level) complete all as specified. 13 Demolition of cement concrete (Unreinforced) Concrete of any description and in any position not otherwise specifically provided complete all as specified. 14 Taking down tarfelt with cement plaster from roof surfaces and lowering and removing the same to a distance exc. 50m and n. exc. 100m incl roughening of old concrete suirface of roof by wire brushing and cleaning the surface to remove all loose dust etc complete all as specified. 15 Taking down cement or cement lime plaster on stone / brick wall, ceiling including raking out joints, hacking for key, scrubbing down with water etc, complete all as specified. 16 S&F 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified. 17 S&F 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified. 18 S&F 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified. 19 S&F 75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified. 20 S&F 110mm bore PVC (SWR) bends any radius complete all as specified. 21 S&F 75mm bore PVC (SWR) bends any radius complete all as specified. 22 S&F 110 mm bore PVC (SWR) branch piece, single (single Y) equal or unequal complete all as specified. 23 S&F 75 mm bore PVC (SWR) branch piece, single (single Y) equal or unequal complete all as specified. 24 S&F 110mm bore PVC (SWR) branch piece, double (double Y) equal or unequal complete all as specified. 25 S&F 75mm bore PVC (SWR) branch piece, double (double Y) equal or unequal complete all as specified. 26 S&F 110mm bore PVC (SWR) junction single, (Single T) equal or unequal complete all as specified. 27 S&F 75mm bore PVC (SWR) junction single, (Single T) equal or unequal complete all as specified. 28 S&F 110mm bore PVC (SWR) vent cowl complete all as specified. 29 S&F in repairs PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified. 30 S&F in repairs 75mm bore PVC (SWR) floor/ nahani/ multi floor trap with CP grating any type including jointing with solvent cement complete all as specified. 31 S&F in repairs 110mm bore PVC (SWR) P’ or S trap complete all as specified. 32 S&F factory made solid PVC door frame of size 50x47mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube, in opening as specified and shown on drawing made on section 8 of SSR 2020 Part-II complete all as specified. 33 S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement & fixing in the frame at site as shown on drawing in section 8 of SSR-2020 Part-II complete all as specified. 34 S&F 75mm size stainless steel butt hinges with mild steel hinge pin complete all as specified. 35 S&F 100 mm size aluminium handles cast type anodised complete all as specified. 36 S&F aluminium anodised barrel tower bolt of extruded section 100 mm long complete all as specified. 37 Supply only 4/4.8 mm thicksheet glass, ordinary quality in square exceeding 0.5 Sqm in each pane, complete all as specified 38 S&F in repair double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty complete all as specified. 39 S&F in repair aluminium (die cast) body door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg complete all as specified. 40 M&L for fabrication and fixing of anodised powder coated (minimum thickness of powder coating 50 micron) aluminium door shutter fixed with rubber gasket, stopper, cleats, handles etc complete for aluminium frame of size 101.6 mm x 44.45 mm x2.01 mm and section of bottom and top rail of section 114 mm x 44.45 mm x 2 mm and lock rail shutter frame of 83 mm x 44.45 x 2 mm with and including panels of 5.5 mm thick plain/ forsted float glass, and with anodised aluminum snap beading of size 18.20 mm x 16.66 mm screwed for fixing fully including all neceassary fittings and EPDM rubber packing each shutter shall be provided with two decorative type aluminium disc handle of 150 mm dia per shutter, 1 No heavy duty 200 mm long aluminium tower bolt and 3 Nos 125 mm long stainless steel butt hinges per shutter including taking down old one complete all as specified. 41 Supply and fix 0.50mm thick prepainted galvalume polyester coated (SMP coating) coloured metal roofing sheet trapezoidal profile having tensile strength 550Mpa as in roof covering fixed with self drilling screws with EPDM washer etc complete all as specified. 42 Ditto all as per item No 41.00 above but as in eaves board complete all as specified. 43 M&L for Second class hard-wood in scantlings timber fixed clean sawn complete all as specified. 44 S&F aluminium anodised snap grid false ceiling to support the boards / tiles with aluminium Tee section 35 mm x 25 mm x 1.40 mm cross Tee 23.50 mm x 23.50 mm x 1.40 mm and aluminium angle 25 mm x 25 mm x 1.40 mm as on edge / sides including hanging proper hanging arrangement with 4 mm dia anodized galvanised iron wire and adjuster complete all as specified. 45 S&F 4mm thick (E-Boards) Non asbestos fibre cement building boards fixed or laid/ inserted to timber/GI/Aluminium framework with screws as in ceiling complete all as specified. 46 S&F 15mm bore steel water tubes, medium grade galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors etc (concealed or on surface) complete all as specified.Note:- The quoted rates shall be inclusive cost of cutting chases in walls, etc. and their making good. 47 S&F 20mm bore steel water tubes, medium grade galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors etc (concealed or on surface) complete all as specified.Note:- The quoted rates shall be inclusive cost of cutting chases in walls, etc. and their making good. 48 Refixing of reusable GI pipes of 15/20mm bore after necessary cleaning and renewal of GI fittings as required in new or old position (Walls, ceiling, floors, etc.) all as specified.Note: (i) GI tubing retrieved against relevant item shall be reused.(ii) New GI fittings required shall be supplied by the contractor and quoted rate shall deemed to be inclusive cost of the same. 49 S&F 500 ltrs capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with polythene foam insulation as intermediate layer and closed top) double layer ISI marked (IS: 12701 : 1996), hoisted and fixed in position all as specified in SSR Part I including inlet, outlet and over flow connections etc including dismantling existing tank complete as specified. 50 S&F 1000 ltrs capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with polythene foam insulation as intermediate layer and closed top) double layer ISI marked (IS: 12701 : 1996), hoisted and fixed in position all as specified in SSR Part I including inlet, outlet and over flow connections etc including dismantling existing tank complete as specified. 51 S&F 20 mm bore ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed as required to use reducer and check nut complete as specified. 52 S&F in repairs 20 mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod & highdensity plastic ball screwed for iron pipe and fixed as required to use reducer and check nut complete as specified. 53 S&F in repair 20mm bore Gun metal globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified. 54 S&F in repair 15mm bore Gun metal globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified. 55 Disconnecting existing tanks of capacity exc 250 Ltrs and n. exc 500 Ltrs, setting aside (or lowering if required) for repairs with all necessary fitting as required, cleaning, etc. and hoisting if required reconnecting and re-fixing in same position after cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc and writing date of cleaning and next due date of cleaning with synthetic enamel paint complete all as specified. 56 Disconnecting existing tanks of capacity exc 500 Ltrs and n. exc 1000 Ltrs, setting aside (or lowering if required) for repairs with all necessary fitting as required, cleaning, etc. and hoisting if required reconnecting and re-fixing in same position after cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, and writing date of cleaning and next due date of cleaning with synthetic enamel paint complete all as specified. 57 S&F factory made steel windows with side hung shutters openable type including friction/projected type hinges steel handle and peg stay complete without glazing bars including taking down old existing windows and making good distrubed surfaces with PCC (1:2:4) type B1 for holdfast, rendring in CM (1:4) and match as per existing surfaces finisheses complete all as specified. 58 S&F factory made steel windows with side hung shutters openable type including friction/projected type hinges steel handle and peg stay complete with glazing bars including taking down old existing windows and making good distrubed surfaces with PCC (1:2:4) type B1 for holdfast, rendring in CM (1:4) and match as per existing surfaces finisheses complete all as specified. 59 S&F 3mm thick sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sqm in each pane including steel pin and hackingout old broken glass panes complete all as specified. 60 S&F galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete all as specified. 61 M&L for preparation of new or previously untreated steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified. 62 M&L for framed work such as grills, gratings, etcwith ends of bars shouldered and/or riveted,or forged into spikes; framedguard bars; barred iron doors; ladders; framed balusters; walkways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified. 63 S&F pressed steel frames of size 125mm x60 mm x(1.25mm thick) for doors with one or more rebates including supply and fixing necessary lugs, hinges, lock strike plate, etc. including one soap coat of priming complete all as specified.Note:- The sizes/dimensions and type (profile) of frames shall be as shown in I.S. 64 S&F pressed steel frames of size 105 x60 mm x(1.25mm thick)for doors with one or more rebates including supply and fixing necessary lugs, hinges, lock strike plate, etc. including one soap coat of priming complete all as specified.Note:- The sizes/dimensions and type (profile) of frames shall be as shown in I.S. 65 M&L for providing plain cement concrete (1:3:6) type C-1, (using 20 mm graded crushed stone aggregate), as in copings, bed block for filing hollow space of steel chowkhats, fixing of hold fast, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles & throating including necessary form work as required complete all as specified. 66 S&F factory made 35mm thick plain framed, panelled shutter with second class hard wood rails and styles (two panel) with lock rail and panel of 9 mm BWP commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified. 67 M&L for 35mm thick second class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified 68 M&L for preparation of new wooden surfaces of any description not other wise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified. 69 S&F 150 mm size aluminium handles cast type anodised complete all as specified. 70 S&F aluminium anodised barrel tower bolt of extruded section 150 mm long complete all as specified. 71 S&F 300 mm long mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate complete all as specified. 72 S&F 300mm size, mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified. 73 S&F 140mm (Overall length of cover plate) floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified. 74 M&L for glazed ceramic coloured tiles/ digital elevation tiles of size 300 X 450 X 7-8 mm/300 X 600 X 7-8 mm thick as on vertical surfaces of wall such as skirting, dado, riser etc. in Bath, WC and Kitchen set and jointed in neat cement slurry and pointed in with tile grout of approved make to match the surface of tile as approved by Engr-in-Charge complete all as specified. 75 M&L for 10 mm thick rendering/ backing coat in CM (1:4) as in vertical surfaces of skirting, dados etc complete all as specified. 76 M&L for non - skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tile, laid over and including 15 mm thick screed bed or bedding layer of cement mortar in (1:6) for laying floor finishes complete all as specified. 77 M&L for non - skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tile, laid over and including 15 mm thick screed bed or bedding layer of cement mortar in (1:6) for laying floor finishes complete all as specified. 78 M&L for non - skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, on vertical surfaces such as skirtings, dados and risers to steps etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tile, complete all as specified. 79 M&L for 25mm thick (average) PCC (1:2:4) type B-0 (using 12.5mm graded crushed stone aggregate) stone aggregate as in roof padding, levelling course including cleaning of existing surface complete all as specified. 80 M&L for vitrified ceramic tiles 10 mm thick (square/rectangular) light shade, area of each tiles not exceeding 0.36 sqm in floor etc set and jointed in neat cement sluury and pointed in white or coloured cement to match the shade of tile laid over and including over 15mm thick screed bed in CM(1:6) complete all as specifierd and as directed. 81 All as per item No 80.00 but as in skirting 10 cm height complete all as specified. 82 S& in repair vitreous China Urinal, Half stall type, white (including flush pipe and waste pipe) complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe complete all as specified. 83 S&F in repair urinal spreader of CP brass for fixing with 15 mm dia pipe complete all as specified. 84 S&F in repair vitreous china wash down water closet pan (pedestral pattern), white including connection trap and to flushing pipe, anti-syphnoge pipe etc complete including PVC seat cover of same make complete all as specified. 85 S&F in repair vitreous China one piece EWC white including duroplast soft close seat cover complete all as specified. Make: Cera Cat No. A1014110 & 11 or technocommerically equivalent make/model in Jaquar/ Plumber/ Nycer 86 S&F in repairWater Closet (squatt pattern) of vitruous china squatting pan of pattern ORRISA pattern size 580 x 440 mm white with integral foot rests (including flush pipe) including PVC P or S trap and connection to trap and flushing pipe anti syphon pipe etc complete including trap set in and incl concrete complete all as specified. 87 S&F in repair 10 ltr capacity dual type PVC flushing cistern low level white colour including PVC connection, PVC flush pipe of required length complete all as specified. 88 S&F in repair 15mm bore PVC Connection with PTMT nut of length 600 mm complete all as specified. 89 S&F in repair 15mm bore PVC Connection with PTMT nut of length 450 mm complete all as specified. 90 S&F in repairs braided Stainless Steel 450mm long Connection Pipe Hose CP For Wash Basin, Kitchen Sink, Geyser complete all as specified. 91 S&F in repairs Bib taps fancy type, brass chromium plated for 15mm bore pipe, screwed for iron pipes or for brass ferrule complete all as specified. 92 S&F in repairs Health faucet brass chromium plated suitable for 15 mm dia pipe with 1.25 meter long flexible tube and CP wall hook including making conncetions and fixed in position complete all as specified. 93 S&F in repair 15 mm bore fancy type bib taps long body (two in one) brass material, 15 mm bore single handle and wall flange with fancy chromium plated screwed down, screwed for iron pipe or for brass ferrule complete all as specified. Make:- CERA Cat part No. F-1015163 or of Techno commercially equivalent model in other approved make. 94 S&F in repair brass chromium plated shower rose 125 mm size with shower arm 150 mm long with swivel joints for fixing with 15 mm bore GI pipe complete all as specified 95 S&F in repair 15 mm bore angle/ stop cock CP brass with flage complete all as specified. 96 S&F in repairs stop valves fancy type, brass chromium plated with long shank and cup (concealed type) for 15mm bore pipe, screwed both ends including necessary fittings such as sockets for pipe or for union complete all as specified. 97 S&F in repairs beveled edge mirror of size 600 x 450 mm, mounted on 6 mm thick AC plain building board or PVC board and fixed to wall on wooden plugs with chromium plated brass screws and cup washers complete all as specified. 98 S&F in repair stainless steel curtain rod of 25 mm dia and thickness not less than 0.75 mm fixed with curtain rod holder and finials etc. complete all as specified. 99 M&L for 10mm thick screed bed or bedding layer in cement mortar (1:4) mixed with WPC in order to maintain proper slope over existing roof surfaces for applying roof treatment work finished even and smooth without using extra cement complete all as specified.Note: Water proofing compound shall be measured and paid perarately under relevant item of schedule A. 100 M&L for PCC (1:2:4) type B1 (20mm graded crushed stone aggregate) as in roof kerbs, slightly rounded or chamfered on edges, mixed with water proofing compound 200 ml per beg of cement or as per manufacturer instructions finished even and smooth on exposed concrete surface without using extra cement all complete as specified and directed. Note: Water proofing compound shall be measured and paid perarately under relevant item of schedule A. 101 Material and labour for water proofing treatment with following application over roofs surface complete all as specified : -(i) Applying bituminous primer at the rate of 0.4 Litres/Sqm on prepared surfaces of roof. Surface shall be kept free, till the primer is impregnated and the solvent oil in the primer get evaporated.(ii) Applying one coat of blown type bitumen of grade 85/25 as binding material at the rate of 1.2 Kg/Sqm.(iii) Laying 3mm thick APP polymeric water proofing membrane of weight not less than 3.0 Kg/Sqm, black finish reinforced with non woven polyster matt, with a thermo fusible finish, torching overlaps with a propane or a butane gas torch, with a overlap of 75mm at sides and 100mm at the ends and sealing including applying a coat of cold emulsion bituminous primer all as per manufacturers instruction including preparation of surface.(iv) Top of membrane shall be provide with solar reflective bituminous aluminum paint @ 0.1 Kg/Sqm as prescribed by manufacture of membrane.Note :- (a) The water proofing treatment shall be carried out by the manufacturer or his authorised applicators in terms of clause 11.43 of MES Sch Part-I (2009).(b) After completion of roof treatment work ponding test for 48 hrs shall be carried out by the contractor and cost for the same shall be . 102 Supply only liquid water proofing compound conforming to IS: 2645 - 1975 specification complete all as specified. 103 S&F for corner glass shelf 225x 225mm with CP steel frame complete all as specified, complete all as specified. 104 S&F factory made uPVC white colour Sliding window three track made of extruded profiles with wall thickness of 2.3mm (+-0.2mm).Window profile with hollow section with multi chamber. Frame (88mmx52mm), sliding sash (42mmx67mm). Sliding meah Sash (24.5mmx57mm) sliding interlock (One vertical length in each shutter) (45.5mmx28mm), glazing bead (24.5x16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc, making arrangement for fixing of hardware, EPDM gasket, 1.2+ -0.2mm thick galvanised steel frame (30mmx18mm) 2no, sliding sash (30mmx18mm), sliding mesh sash (26mmx10mm) Profile to be inserted in required profile, frame will be fixed to the wall with 8mmx100mm long fastenerers, Hardware (Touch lock of zine alloyed (white poweder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.4mm and required accessories including 4.8mm thick sheet glass including taking down old windows. (Note: The unit rate quoted by contractot includes cost of glass, wire cloth and all other connected accessories. Net Opening will be measured for payment purpose)(A)Area not exceeding 2 Sqm Each 105 S&F in repairs 300mm size, mild steel ordinary rat tail rod pattern springs including roller and roller plate complete 106 S&F in repairs aluminium anodised barrel tower bolt of extruded section 150 mm long complete all as specified. 107 S&F in repairs 150 mm size aluminium handles cast type anodised complete all as specified. 108 S&F in repairs 300 mm long mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate complete all as specified. 109 S&F in repair brass chromium plated tubular towel rail, 20mm dia and 0.80mm thick, D type, 60cm long between flanges complete all as specified. 110 S&F in repairs Toilet Paper Holder chromium plated, including all necessary fittings, connections etc complete all as specified. Make – Jaquar Cat Part No CAN 1151N or of Techno equivalent model in other approved make. 111 S&F in repair fancy type swan neck pillar taps, brass with capston heads, chromium plated, screwed down high pressure, with or without lettered hot or cold with long screwed shanks and fly-nuts, screwed for iron pipe 15mm bore complete all as specified. 112 S&F in repairs wash hand basin vitreous China, white, flat back (550x400mm) including cutting for and pinning ends of brackets and waste coupling of Bass CPfor basin etc with long screwed shanks and fly nuts, full threaded flage embedded in white cement incl PVC waste pipe required length complete all as specified 113 S&F in repairs Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified 114 S&F in repairs Brass CP mixer for mixing hot & cold water screwed down for iron pipe 15mm bore and fixed complete all as specified 115 M&L for preparing of old oil bound distempered surfaces of wall including cornices, pilasters, and other wall features etc by washing, rubbing down and stopping and applying two coat of oil bound distempering (oil emulsion) on the same including chak whiting on plastered surfaces, prepara-tory to distempering complete all as specified. 116 M&L for preparation of the surface and applying 1.00mm thick (average thickness) wall care putty on wall complete all as specified . 117 M&L for preparing old decorated plastered or un plastered surfaces of ceiling including cornices, pilasters, and other wall features etc. by brooming down or steel wire brushing, scrapping down smoke soot, moulds mass and efflorescent salts and trading oil and greasy spots etc and applyingone coat of white washing on the same all complete as specified. 118 M&L for preparation old decorated wooden painted surfaces and applying one coats of synthetic enamel paint on wooden surfaces of any description, not otherwise, described, over 10cm width or girth complete all as specified. 119 M&L for preparation of old painted surfaces ofany description, not otherwise described, over 10 cm width or girth and applying one coat of synthetic enamel painting on steel surfacescomplete all as specified. 120 M&L for preparation of old wall surfaces any type by wire brushing, brooming, dusting & finally washing with water to clear the cracks absolutely free from any kind of existing finishes & foreign materials, making good minor surface imperfections such as holes, dents cracks etc in cement mortar 1:3 and applying two coats of exterior acrylic emulsion paint all as per manufacturers specification and as specified. 121 M&L for preparation of old wall surfaces any type by wire brushing, brooming, dusting & finally washing with water to clear the cracks absolutely free from any kind of existing finishes & foreign materials, making good minor surface imperfections such as holes, dents cracks etc in cement mortar 1:3 and applying one coat of exterior acrylic emulsion paint all as per manufacturers specification and as specified. 122 M&L for 15mm thick rendering in CM 1:4 on faces ofstone brickwork or concrete surfacewalls finished even and smooth without using extra cement complete al as specified. 123 M&L for preparation of new decorative plastered surfaces of wall and applying two coat of exterior acrylic emulsion paintover a one coat of alkali resistant primer complete all as specified. 124 Taking down the old UNSV copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, etc for taking credit ( credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc complete all as specified. 125 M&L for point wiring complete with 1.5 Sqmm multistranded copper conductor single core PVC insulated unsheathed FR-LS cable 1100 volts grade (ISI marked) with proper colour coding drawn through and including non-metallic rigid PVC medium grade conduit not less that 20mm dia and conduit accessories (ISI marked) concealed in wall/fixed to roof, ceiling etc including provision of 1.5 Sqmm PVC insulated multistranded unsheathed copper conductor cable FR-LS (ISI marked) as earth continuity conductor connected to common earth dolly, fabricated sundn terminal box made out of GI sheet steel not less than 1.22 mm thick for boxes upto a size of 200 x 300mm and above this size not less than 1.63 mm thick duly painted with aluminum inside and anticorrosive paint outside, concealed in walls, with 3mm thick bakelite/plastic laminated sheet top cover fixed with cadmium plated iron screws for housing switches, socket outlets, fan regulators etc duly earthed including cutting chases of existing wall for conduits and sinking for boxes and making good to the disturbed surface of wall/floor and matching with existing specifications.Connections of cable with MCBs or bus bar shall be done through proper size copper/brass thimbles. Where concealing of conduit is not feasible ie on surface of roof etc, conduit shall be fixed on surface with necessary saddles at no extra cost all as specified and as directed for the following :-(a) One light point controlled by one way switch 5/6 amps. 126 (b) One ceiling fan/Exhaut fan point controlled by one way switch 5/6 amps. 127 (c)One socket out let 5/6 amps point on the independent board 128 (d)One bell/buzzer point controlled by one bell push button 129 (e) One light point controlled by two two way switch 5/6 amps. 130 All as per item Ser No 125 here-in-above but wiring with 2.5 sq mm single core copper conductor for one socket out let 15/16 amps point on the independent board complete all as specified and directed. 131 M&L point wiring with FRLS PVC insulated unsheathed multistranded copper conductor,conforming to IS-694 of size 1.50 sqmm nominal cross sectional area single core drawn in and including 20/25mm size medium grade PVC doubled lock Casing-Capping and fittings, including, pressed steel concealed terminal switch boxes not less than 1.2mm thick of reqd size factory made duly painted inside and outside with two coats of black bituminous paint over one coat red oxide primer, 3mm thick plastic laminatedsheet top cover (ISI Marked) fitted with chromium plated brass screws & washers complete including 1.50 sqmm nominal cross sectional area PVC insulated unsheathed multistranded copper conductor green as earth wire connected to earth dolly with all accessories complete all as specified and directed. (a) One light point controlled by one way switch 5/6 amps. 132 (b) One ceiling fan/Exhaut fan point controlled by one way switch 5/6 amps. 133 (c)One Socket out let 5/6 amps point on the independent board 134 (d)One bell/buzzer point controlled by one bell push button 135 S&F switch piano flush type 5/6 amps single pole one way complete all as specified and directed. 136 S&Fswitch piano type 2 way 5/6 Amp, 230 Volt, flush button single pole one way complete all as specified and directed by Engineer -in-Charge. 137 S&Fsocket 3 Pin, 5/6 amps, white ivory finish flash type complete all as specified and directed. 138 S&F socket outlet 2 in 1, 5 Pin, 5/15 amp,multipurpose 230 volt flash type complete all as specified and directed by Engr-in-Charge. 139 S&F Switch socket combination 3 pin in replacement ,5A, multipin,flushtype 140 S&FSwitch socket combination 3 pin 16A in replacement,multi pin, flushtype 141 S&F switch piano flush type 15/16 amps single pole one way complete all as specified and directed. 142 S&F bell/buzzer push 5/6 amps flush type white/ivory finish complete all as specified and directed. 143 S&F call bell ding dong typeAC Single pole 220/240 Volts, surface type complete all as specified and directed. 144 S&F in repair switch piano flush type 5/6 amps single pole one way complete all as specified and directed. 145 S&F in repair socket 2 in 1, 5 Pin, 5/6 amps, white ivory finish flash type complete all as specified and directed. 146 S&F in repair socket outlet 2 in 1, 5 Pin, 5/15 amp,multipurpose 230 volt flash type complete all as specified and directed by Engr-in-Charge. 147 S&F modular switch type 5/6 amps single pole one way complete all as specified and directed. 148 S&F Socket, 6A - 2/3 pin combined 2 module, white ivory finish modular type complete all as specified and directed. 149 S&F Socket, 6A/16A- 2/3 pin combined 2 module, white ivory finish modular type complete all as specified and directed. 150 S&F modular switch type 15/16 amps single pole one way complete all as specified and directed. 151 S & F Metal flush box 3 modulecomplete all as specified and directed. 152 S & F Metal flush box 6 modulecomplete all as specified and directed. 153 S & F Metal flush box 8 modulecomplete all as specified and directed. 154 S & FWhite cover plate with frame, 3 module complete all as specified and directed. 155 S & FWhite cover plate with frame, 6 module complete all as specified and directed. 156 S & F White cover plate with frame, 8 module complete all as specified and directed. 157 S&F in repairCeiling rose, surface type with back plate, three terminal /PVC/ polycarbonate, isolated body complete all as specified and directed. 158 S & F in repair lamp holder, isolated body, with back plate suitable for batten/anglefittings complete all as specified and directed. 159 S&F of stepped type modular electronic fan regulator 120 watt 2 module suitablefor 1200/1400 mm sweep energy saving fans,ISI marked complete all as specified and directed. 160 S&F LED lights fitting 1x 20W, 220V AC decorative box type with driver,IP 20, class I, wall/ surface mounted, integrated type with extruded aluminium housing integrated high efficiency electronic driver and surge suppressor of 4KV or more, luminaire efficiency not less than 120 lumens/watt, power factor not less than 0.90, CRI 80, THD 10%, operating range - 140 to 270 V, 50 Hz fixed connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete with all accessories internally prewired and including necessary taking down the old unserviceable fitting complete all as specified. 161 S & F LED bldg security light fittings 35 Watt ,230 VAC outdoor type with high pressure die cast aluminium housing, heat resistant, toughned glass cover with IP66 protection and surge suppressor of 7.5 KV or more, luminaire efficiency not less than 120 lumens/watt, power factor not less than 0.90, CRI 80, THD 10%, operating range - 140 to 270 V, 50 Hz fixed connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete with all accessories internally prewired and including necessary taking down the old unserviceable fitting complete all as specified. 162 Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp,IP 20, class I, wall/ surface mounted, luminaire efficiency not less than 100 lumens/watt, power factor not less than 0.90, CRI 80, THD 10%, operating range - 140 to 270 V, 50 Hz including connecting up with three core flexible copper conductor cable of suitable size complete. 163 S&f LED recessed mounted light (600×600)mm35/36 watt suitable for indoor spaceand surge suppressor of 4KV or more, luminaire efficiency not less than 100 lumens/watt, power factor not less than 0.90, CRI 80, THD 10%, operating range - 140 to 270 V, 50 Hz fixed connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete with all accessories internally prewired and including necessary taking down the old unserviceable fitting complete all as specified. 164 S&F in repair Mirror Light 9/10 Watt LED with constant current electronc driver, all accessories including provision of three core PVC cable of copper conductor and making connection and including necessary taking down the old unserviceable fitting complete all as specified.. 165 S&F Sheet metal enclosure for 4 way Distribution Boards (DB’s), double door, Triple pole & neutral with din rail (as per OEM), 415Volt IP-20 protection suitable for fixing MCBS/lsolators with andincluding taking down old one complete all as specified and directed. 166 S&F MCB distribution boards (DBs) with sheet metal enclosure, double door, IP 43 protection, 240 Volts, 8 way, single pole and neutral, with din rail (as per OEM), neutral link, earth link earthing studs, suitable for fixing MCBs, without MCBs fixed flush to wall/other surface andincluding taking down old one complete all as specified and directed. 167 S&F MCB, Single pole & neutral 32 amps, 240 volts, ‘C’ curve, 10 KAall completeincluding taking down the old one andincluding taking down old one complete all as specified and directed. 168 S&F MCB, Single pole, 6 to32 amps, 240 volts, ‘C’ curve, 10 KAall completeincluding taking down the old one complete all as specified and directed by Engr-in-Charge. 169 M & L Sub main wiring casing caping type with two run single core cable PVC insulated cable with6.0Sqmm (Nominal area) multi stranded copper conductor FRLS cable 1100 volts gde incl earth continuity conductor using PVC insulatedcable of stranded copper conductor of size 6.0 Sqmm connected to common earth dolly anddrawing into rigidPVC casing capingof size 32 mm medium gradesize,making good the disturbed surfacescomplete including taking down old submain wiring.(NOTE : Two run of submain wiring cable alongwith one run of earth wire shall be measured as one length. . 170 M &L for Earthing complete with GI earth plate electrode 600x600x6mm thick buried directly in ground (Earth pit not less than 2.25M deep below normal ground level) with top edge of the plate not less than 1.5m below normal GL. Connected to galvanized earth lead wire 4mm dia by means of nut, bolt, check nut and washersincluding necessary excavation and earth work in soft/loose soil, GI protection pipe light grade 15mm bore for protecting the GI wire mesh funnel alternate layer of charcoal dust, and saltPCC pit 1:3:6 type C1 using 20mm graded stone aggregate and 50mm thick RCC 1:2:4 type BO using 20mm graded stone aggregate cover re-inforced with 8 mm dia MS TMT bars 80mm C/C both ways complete all as specified and shown in Electrical plate No.3 SSR part-1 and connected to the earth point and testing complete including taking out the old one complete all as specified and directed by Engr-in-Charge.
