Tender For Special Repair To Building No. P-57 And P-134 At Afac Coimbatore.; 1 Excavating in trenches not exceeding 1.5m wide and deep getting out for foundation not exceeding 10 Sqm on plan and not exceeding 1.5m deep and getting out in hard/dense soil, complete all as specified & directed. 2 Returning filling in including spreading levelling and well ramming in layers not exceeding 25 cm in hard soil, complete all as specified & directed. 3 Removing excavated material not exc 50m and depositing where directed at a level not exceeding 1.5 m above the starting point, complete all as specified & directed. 4 Removal of concrete and plaster debris to a distance 5 Km and depositing where directed at a level n exc 1.50 m above the starting point complete all as specified and asdirected. 5 Providing and injecting chemical emulsion for Post Constructional Antitermite Treatment along external wallalong apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron, complete all as specified & directed.Note : The treatment shall be at plinth protection area around the building 6 Material & Labour for cement concrete in foundation filling and mass concrete typeD-2 1:4:8 (40mm graded stone aggregate), complete all as specified & directed. 7 Material & Labour for cement concrete type C-1 1:3:6 (20mm graded aggregate)in coping, benching concrete in manholes including necessary Use and waste of Form work etc complete all as specified & directed. 8 Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement including forms, mounds etc, complete all as specified & directed. 9 Material and labour cement concrete type B1 1:2:4 (20 mm graded aggregate) as in roof kerbs or mud stops, rounded or chamfered on edges all as specified and directed. 10 Material & Labour for PCC 1:2:4 type B-1 using 12.5 mm graded stone aggregate as in padding concrete inmixed with liquid water proofing compound as specified by manufacturer instruction on concrete surfaces of roof and making the surfacesfinished fair and even as in required slope for draining out the rain water all as specified and directed.Note - Water Proofing Compoundshall be measured and paid for separately 11 Material & Labour for pre cast cement concrete block masonry type C1 1:3:6 (20 mm graded agrregate)solid blocks exc 10cm in width having minimum compressive strength of 50 kg/sq cm as per IS 2185 (Part I) 2005 and set in cement mortar 1:4 complete all as specified 12 Material & Labour for Cement concrete 1:7:12using brick aggregate of size 40 to 60mm as in sunken portion, all as specified & directed. 13 Supply only liquid water proofing compound (conplast-X 42 11 C fosroc chemical (India) Ltd or Equivalent on STP / Bostik India Pvt Ltd ) 14 Material & Labour for cement concrete type B-1 1:2:4 (20mm graded aggregate) as in coping including necessary form work in first floor and ground floor, exposed surface of concrete shall be finished even and smooth without using extra cement, complete all as specified & directed. 15 Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc, and making good, cutting not exceeding 10 cm girth, complete all as specified & directed. 16 Material & Labour for Forming jambs, etc. to openings (to foregoing item), including cutting, toothing and properly bonding into old work, also facing, jointing and pointing to match existing work, complete in cement mortar 1:6 complete all as specified & directed. 17 Material & Labour for Cutting holes inbrick walls in cement mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 (using 20mm graded stone aggregate) complete all as specified & directed. 18 Cutting exising manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel(1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 (using 20mm graded stone aggregate) smooth finished and reforming benching as required of 150mm dia pipe, complete all as specified & directed. 19 Material & Labour for precast reinforced concrete type B-1 1:2:4 (20mm graded aggregate) set in cement mortar 1:4 as in cover slabs, complete all as specified & directed. 20 Material & Labour for TMT bars 5mm dia and over and upto and including 10 mm diacut to length bent to shape required including cranking bending and binding with MS wire not less than 0.90mm dia, complete all as specified & directed. 21 Material & Labour for bars 12mm dia for handles confirming to Fe 290 Gde E-165, complete all as specified & directed. 22 Taking down chowkhats or frame not exceeding 1.5 Sqm with shuttter(without taking off shutter from the frames), all as specified & directed. 23 Taking down chowkhats or frameexceeding 1.5 sqm and not exceeding 4 Sqm with shuttter(without taking off shutter from the frames), all as specified & directed. 24 Taking downofshutters onlybut exceeding 1 sq. m and not exceeding 2 Sqm each, all as specified & directed. 25 Material & Labour for Flush shutters 30mm thick, solid coreconstruction, with particle board coreand plywood face panels, in one face is covered with deco rative face veneer with lipping/frame to match with kiln seasoned and chemicaliy treated including all fittings etc complete all as specified and directed. 26 Material & Labour for Solid PVC Door Frame of size 50mm x 47mm made out of 5mm wood grain printed PVC sheet reinforced with Mild Square Square tube, suppling, fixing in with necessary screws etc & edges will be painted tomatch with printed sheet as per specification & drawing 27 Providing and fixingFactory Made Solid PVC Moulded Door Shutter With Wood free EPS core, 28 to 30mm thick(stiles), with 2, 4, or 6 raised panel design with 2mm thick 3D wood grain Moulded PVC Sheet Polyurethane painted on the front face & 2mm Plain colour PVC Sheet on back face, supplying & fixing in frame at site as per specification & drawing of required size with necessary full body threaded star headed counter sunk Stainless Steel screws, all as specified & directed. 28 Supply and fixing factory made uPVC white colour Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) upto 1.50m height made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 1.75 sqm) comprising of uPVC multichambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardwares and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified and directed.(Note - Glass or wiremesh shall be paid separately) 29 Supply and fix wire netting ofSS/ Fibre wire mesh0.91 mm diasize of mesh 12 mmon wall surfaces to receive plastering for crack repairsfixed with tinned tacks of wire staplesall as specified and directed. 30 Supply & Fixing in repairs 20/25mm dia decorative type SS curtain rails with decorative type fixing brackets, stops, rollers etc. all as specified & directed by Engr in charge. 31 Supply & Fixing stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples or steel screws all as specified & directed. 32 Supply & Fixing in repairs Stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staple, all as specified & directed. 33 Supply & Fixing in repairs for 300 mmlong Aluminium alloy ,anodised sliding door bolt with hasp and stapple, all as specified & directed. 34 Supply & Fixing in repairs 200 mm long aluminium anodised barrel tower bolt, all as specified & directed. 35 Supply & Fixing in repairs 100 mm long aluminium anodised barrel tower bolt, all as specified & directed. 36 Supply & Fixing in repairs100 mm long butt hinges medium weight cold rolled, all as specified & directed. 37 Supply & Fixing in repairs 150 mm long extruded aluminium alloy anodised handle fabricated type, all as specified & directed. 38 Supply & Fixing in repairs 100 mm long extruded aluminium alloy anodised handle fabricated type fixed, all as specified & directed. 39 Supply & Fixingin repairs Floor door stopper of aluminum alloy body and tongue, anodized with hard drawn steel spring and vulcanised rubber piecefixed in floor, over all length of cover plate 140mm all as specified and directed. 40 Supply and fixofHard drawn wire fabric (not exceeding 4kg/sqm) welding to steel reinforcementon wall/ ceiling surfaces as reinforcement in patchesfixed with tinned tacks of wire staples etcall as specified and directed. 41 Materia and labour forRemoving corrosion of steel reinforcement by mechanical means like wire brushing, chipping to remove loose rust and then applying rust removal solution Reebaklens RR of Fosroc / Sika Rust off 100 / equivalent in bostic India Ltd by using brush application, leaving the surface for at least 15 to 30 minutes, then removing loose materials by scrubbing or with brush and applying anti corrosive coating to reinforcement Nitozinc primer of Fosroc/Sika Friazinc R / equivalent in Bostic india Ltd , all as recommended by product manufacturer and applying (Nitobond AR by M/s FOSROC/ Equivalent) chemicals for bonding over old cement / steel surfaces in walls, ceilings, facia, projections and RCC drops complete all as specified and as directed. 42 Material & Labour for preparing, washing, rubbing down and complete removal of existing treatmentfor applyingDampness treatment on walls/ceiling of required shade and applying two coats of waterproffing damp proof over a coat ofself priming damp proof on vertical and horizontal of Internal and external surfaces complete all as specified and directed. Make : Dr Fixit/ Asian smartcare damp proof/ As equivalent)(Note : Apply additional coat of damp proof in case of severe dampness. Application process and Dilution propotions as per manufature instructions) 43 Material & Labour for providing and fixing mirror polishing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts, capsetc., of required size, on the top of floor or the side of waist slab with suitable arrangement complete drilling and filling of holes etc all as specified and directed 44 Material & Labour for Roughening/ Brushing surfaces of old concrete roof surfaces by picking, sweeping clean and washing down with water to remove dust, etcand brushing with neat cement slurry @3Kg/Sqm mixed with liquid Water Proofing Compound complete all as specified and as directed.Note - Water Proofing Compoundshall be measured and paid for separately 45 Supply and application of single component, seamless, spray applied, hybrid elastomeric PU based material i.e Nitoproof 725 of Fosroc chemicals (or) sikalastic 590 of Sika India Pvt Ltd (or) equivalent in any approved make as approved by GE over a coat of primer i.e Nitoproof WB primer of Fosroc chemicals (or) diluted sikalastic 590 of Sika India Pvt Ltd (or) equivalent in any approved make as approved by GE, all as recommended by manufacturer ans as specified.Note:-(i) Average minimum DFTof PU based material shall be 1mm and shall be applied by using a Graco pump.(ii) PU based material shall process the following properties solids by volume -65%, tensile strength ASTM D412-1.75Mpa, density 1.3 g/ml, elongation ASTM D-412-350%, Adhesion to substrate concrete-1.9Mpa, resistance to water-10m pressure.(iii) Rate are deemed to be include for cleaning and preparation of surface to receive PU water proofing system including filling of cracks with cementitious repair mortars i.e renderoc CS of Fosrock chemicals (or) equivalent of approved make.(iv) Work shall be got carried out by authorised applicator of the manufacturer and it shall be got approved by the GE before progressing the work.(v) 10 years of guarantee shall be provided and security amount shall be deposited as speicified in tender documents. 46 Material & Labour for Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to Fe.290.Gde-E-165, all as specified & directed. 47 Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations, complete all as specified & directed. 48 Dismantling wall hearth tiling including cement mortar bedding (but not backing) and removing unserviceable material, all as specified & directed. 49 Material & Labour for white/coloured Non skid coloured tiles superior finish grade B-1 quality 7 to 8mm thick(square/ rectangular) area of each tiles exceeding 0.11 sqm but not exc 0.16 sqm in floor with rectified edges ( joint free) etc set and jointed in neat cement slury over cement screed 15 mm thick 1:6, all as specified & directed.Note : Rates IncludingEpoxy based tile Grout/ jointfiller to fill the gaps between tiles with necessary spacers of specified colour shade to match. 50 Material & Labour for White / Coloured glazed ceramic tiles economy finish Gde B-II (b) quality of size 450/600 x 300 x 7 mm thick with rectified edges as in vertical surfaces set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over and incl 10 cm thick backing with cm 1:4 all as specified & directed.Note : Rates IncludingEpoxy based tile Grout/ jointfiller to fill the gaps between tiles with necessary spacers of specified colour shade to match. 51 Material and labour for preparation of floor and wall surfaces as SUNKEN treatment and sealing of all joints, corners, junctions of pipes and Masonry with polymer mixed slurryin two layer of cement slurry at 0.488 kg/ sqm mixed with Acrylic based polymer ARMOUR -CRETE of structural water proofing pvt ltd by ratio 1:2 (one Armour Crete : Two cement) or POLYCRYL of Green boro polychem pvt ltd by ratio 1:2 (one polycryl : Two cement) or Ready to use PIDIFIN 2k of PIDILITE INDUSTRIES or SHALICRETE-500 of capital steel and chemicals pvt ltd and silica sand by ratio 1:2:2 (Shalicrete : Cement : Silica Sand) or NAFUFILL BB2 of MC Bauchemic India Pvt Ltd (ready to use) at 0.126 kg/sqm as per manufacturers instructions. Each layer will be allowed to Air Cure for 4 hours and as directed. 52 Material & Labour for double charged Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.36 sqm but not exceeding 0.42 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to matchwith rectified edges ( joint free) etc set and jointed in neat cement slury over cement screed 15 mm thick 1:6 all as specified & directed.Note : Rates IncludingEpoxy based tile Grout/ jointfiller to fill the gaps between tiles with necessary spacers of specified colour shade to match. 53 Material & Labour for double charged Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.36 sqm but not exceeding 0.42 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to matchwith rectified edges as in vertical surfaces set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over and incl 10 cm thick backing with cm 1:4 all as specified & directed.Note : Rates IncludingEpoxy based tile Grout/ jointfiller to fill the gaps between tiles with necessary spacers of specified colour shade to match. 54 Material & Labour for Cement concrete 40 mm thick, 1:2:4 , type B1 (using 20 mm graded stone aggregate) for sub bases, floors & pavings and plinth protection, all as specified & directed. 55 Material & Labour for coloured chequeredtiles of size 30 x30cm/ 40X40 cmx25mm thick in floor with grey pigment cement and colourpigments of rectified edges ( joint free) etc set and jointed in neat cement slury over cement screed 15 mm thick 1:6. directed by Engr-in-charge 56 Taking down cement plaster including racking out joint hacking for key scrubbing down with water etc, all as specified & directed. 57 Material & Labour for 25mm tk Granite (of any type) work (table rubbed and polished) injambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite all as sspecified and directed. 58 Material & Labour forGranite (Lapotro finish) tiles 18-20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete all as specified and directed. 59 Material & Labour for12mm thick Granite (Lapotro finish) tiles machine cut, in skirting/ dado laid over cement screed and jointed with grey cement slurry, and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete all as specified and directed. 60 Material and labour 10 mm thick cement plaster in cement mortar 1:6 for wall finished even & smooth without using extra cement. 61 Material and labourTwo coats of Oil bound distemper over a coat of alkali resistantprimer on walls, pillasters, cornices, etc, on newly plastered wallsincludingpreparation of surfaces with 1mm wall care putty all as specified and as directed. 62 Material and labourfor preparing, washing, rubbingdown and stopping of distempered and painted surfaces and applying two coat of oil bound distemperon old decorated walls, pillasters, cornices etc all as directed. 63 Material and labourfor preparing, washing, rubbingdown and stopping of distempered and complete removal of existing treatment and painted surfaces and applyingtwo coat of oil bound distemper over one coat of alkali resistant primer with 1mm wall care putty on old decorated walls, pillasters, cornices etc all as directed. 64 Material and labour 15 mm thick cement plaster in cement mortar 1:4 for wall finished even & smooth without using extra cement, all as specified & directed. 65 Material and labour 5 mm thick cement plaster in cement mortar 1:3 for ceiling finished even & smooth without using extra cement, all as specified & directed. 66 Material & Labour for applying Twocoats ofacrylic emulsion paintof Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives over and including priming coat of exterior primer applied on new plastered surfacesofwalls complete as mentioned in SSR all as specified and as directed. 67 Material & Labour preparing, washing, rubbingdown and complete removal of existing treatmentfor applying Twocoats ofacrylic emulsion paintof Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives over and including priming coat of exterior primer applied on Old decorated surfacesofwalls complete as mentioned in SSR all as specified and as directed. 68 Material and labourfor preparing, washing, rubbingdown and stopping of distempered andpainted surfaces and applying one coat of alkali resistant primer over two coat of oil bound distemperon new decorated Ceiling, pillasters, cornices etc all as specified & directed. 69 Material and labourfor preparing, washing, rubbingdown and stopping of distemperedandpainted surfaces and applying one coat of oil bound distemperon old decorated Ceiling, pillasters, cornices etc all as specified & directed. 70 Material and labourfor preparing, washing, rubbingdown and stopping of distemperedand complete removal of existing treatment andpainted surfaces andapplying two coat of oil bound distemperover one coat of alkali resistant primer on old decorated Ceiling, pillasters, cornices etc all as specified & directed. 71 Hacking out old broken glass and fixing new 4.8 mm thick sheet glass, ordinary quality and glazing with wooden beading not exceeding 0.5 Sqm in each pane all as specified and directed. 72 Material & Labour for 4 mm thick figured glass pin head type and glazing with oil putty in square not exceeding 0.5 Sqm in each pane fixed in repairs including hacking, all as specified and directed. 73 Material & Labour for 4.8 mm thick sheet glass, ordinary quality and glazing with wooden beadingexceeding 0.5 Sqm in each pane all as specified and directed. 74 Material & Labour forPreparation of old painted wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying one coat of Synthetic enamel paint (Ordinary tint), all as specified & directed. 75 Material & Labour for two coats synthetic enamel paint on new steel Surfaces of any description, over 10cm in width or girth,not otherwise described over 10 cm width or girth, all as specified & directed. 76 Material & Labour for Preparation of old steel Surfaces of any description, over 10cm in width or girth,not otherwise described over 10 cm width or girth and applying one coat of Synthetic enamel paint (Ordinary tint), all as specified and directed. 77 Supply & Fixing in repairs 25 mm dia Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron/cpvc pipe and fixed, all as specified & directed. 78 Supply & Fixing in repairs 50 mm dia Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron/cpvc pipe and fixed, all as specified & directed. 79 Disconneting & Dismantling existing tanks of capacity500 ltrs setting aside (or lowering if required) for Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes,repairs, etc. and hoisting if required reconnecting and re-fixingin position, all as specified & directed. 80 Dismantling and disconnecting existingwater tanks of capacity500 ltrsand removing all as specified and directed. 81 Supply, Hoisting and fixing 750 Ltr capacity PVC water tanks rotational moulded polyethylene water storage tank cylinderical vertical with same capacity with closed top hoistedand fixed in position all as specified in SSR part Iincluding complete set of ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron/cpvc pipe and fixed ofsize 25 mm diaincluding Float valve,tank adaptor, union etc, all as specified & directed. 82 Supply and fix in repairs vitreous chinawash down water closet panpedestal patternwhite with flushing cistern including all accessoreis i.e seat cover andHealth faucet jets of ABS body, all as specified & directed.Note : All as per CWSN Norms 83 Supply & Fixing in repairs Vitrious china wash basin white flat back size 550X400mm including, waste coupling , pipe and cutting for and pinning in ends of brackets or erecting stand brackets, all as specified & directed. 84 Supply & Fixing in repairs Vitreous China Urinal, Half stall type, white including, waste coupling , pipe and cutting for and pinning in ends of brackets or erecting stand brackets, all as specified & directed. 85 Supply & Fixing in repairs 15mm Chromium plated Push tap any colour high pressure of PTMT screwed for iron pipe and fixed,suitable for urinals, (Minimum weight 15mm-50gms), all as specified & directed. 86 Supply and fix wall mounted Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long all as specified & directed. 87 Supply & Fixing in repairs stainless steel gratings Grating doom 125 mm dia with waste hole. (Minimum weight 40gms) all as specified and direceted 88 Supply & Fixing in repairs Brass Hat and coat hooks, solid body, 175mm to 250 mm, all as specified & directed. 89 Supply & Fixing 900 mm x 450 mm frame less bevelled edge mirror of selected quality glass fixedwith chromium plated brass screw and cup washer, all as specified & directed. 90 Supply & Fixing 15mm bib taps chromium plated round handle, screwed down, screwed for iron pipe and fixed in repair, all as specified & directed. 91 Supply & Fixing15mm pillar taps chromium plated round handle, screwed down, screwed for iron pipe and fixed in repair, all as specified & directed. 92 Supply & Fixing 15mm stop valves, chromium plated, screwed down, high pressure, with crutch or round handle screwed bolts ends for iron pipe or for unions and fixed in repair, all as specified & directed. 93 Supply & Fixing in repars 15 mm dia fancy type Brass CP swan neck taps screwed down for iron/cpvc pipeand fixed all as specified and directed. 94 Supply & Fixing in repairs tubular brass chromium plated Towel rail 20 mm dia D type 60 cm long between flanges, all as specified & directed. 95 Supply & Fixing PVC connection 15mm size with PTMT nuts of length 450mm, all as specified & directed. 96 Material & Labour for 40mm bore dia High density polyethylene pipes (HDPE) of pressure rating 6 kgf/cm2 fixed complete to walls, ceilings or in floors as drain out pipe etc, all as specified & directed. 97 Supply & Fixing 75 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints, fixed in wall/ floor with necessary clamping where required, all as specified & directed. 98 Supply & Fixing 110 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints, fixed in wall/ floor with necessary clamping where required, all as specified & directed. 99 S & F (SWR) floor trap, plain with grating including jointing with solvent cement 75 mm dia inclduing fixing to existing pipe properly with solvent all as specified and directed 100 Supply & Fixing PVC bends for 75 mm bore pipe, complete all as specified & directed. 101 Supply & Fixing PVC bends with access door for 75 mm bore pipe, complete all as specified & directed. 102 Supply & Fixing PVC bends with access doorfor 110 mm bore pipe, complete all as specified & directed. 103 Supply & Fixing PVC bends for 110 mm bore pipe, complete all as specified & directed. 104 Supply & Fixing PVC (SWR) vent cowl 110 mm dia, complete all as specified & directed. 105 Taking down 15 mm bore steel tubing and connection etc. complete all as specified & directed. 106 Taking down 20mm bore steel tubing and connection etc, complete all as specified & directed. 107 Taking down 25mm bore steel tubing and connection etc, complete all as specified & directed. 108 Supply and laying of 15mm bore Tubes, medium grade galvanised mild steel, with all fitting and fixed complete to walls and ceilings or laid complete all as specified and directed 109 Supply and laying of 20mm bore Tubes, medium grade galvanised mild steel, with all fitting and fixed complete to walls and ceilings or laid complete all as specified and directed 110 Supply and laying of 25mm bore Tubes, medium grade galvanised mild steel, with all fitting and fixed complete to walls and ceilings or laid complete all as specified and directed 111 Closing and removing existing branch drain, making good to walling and rendering, cutting out branch channel, and making good benchingsin cement concrete 1:2:4 type B-1 smooth finished as required of 150mm dia pipe, complete all as specified & directed. 112 Supply & Fixing in repairs sinks made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm all as specified and directed 113 Material & Labour for PCC 1:4:8 type D2 (using 40mm graded stone aggregate) as in bed to drain pipes 150mm dia including packing under and haunching against the sides of pipesafter they are laid and tested, complete all as specified & directed. 114 Material & Labour for PVC (SWR) 150 mm dialaid and jointed complete with collars, complete all as specified & directed. 115 Taking down old unserviceable point wiring (light, fan socket or power) complete, including fixture and fittings such as switches,ceiling rose, pendents, regulators,sockets, light fittings etc.removing materials for keeping for taking credit( credit for above items should be made as per conditions separately) and making good disturbed surface of walls floors etc, complete all as specified & directed. 116 Taking down old unserviceable submain wiring of any size including GI/copper earth continuity conductor in PVC conduit on wall/roof and making good to disturbed surfaces, complete all as specified & directed. 117 Taking down Ceiling fan sealing cable end, dismantling blades from fan and keeping in safe custodyfor reuse at site andmaking good disturbed surfaces, complete all as specified and as directed. 118 Refixingonly Ceiling fan with and including carrying out cleaning servicing, oiling and greasing of ceiling fans and connecting up including provision of cable from celling rose/ connector to fan, all as specified and as directed. 119 Material & Labour for painting of Ceiling fan complete, in situ with synthetic enamal paint by spraying incl filling cavities with filler, one coat after cleaning all dust etc, all as specified and as directed. 120 Taking down exhaust fan, sealing cable end, dismantling blades from fan and keeping in safe custodyfor reuse at site andmaking good disturbed surfaces, complete all as specified and as directed. 121 Refixingonly exhaust fan ( In Repair)and connecting up including provision of cable from celling rose/ connectorto fan, all as specified and as directed. 122 Material & Labour for painting ofexhaust fan complete, in situ with synthetic enamal paint by spraying incl filling cavities with filler, one coat after cleaning all dust etc, all as specified and as directed. 123 Disconnecting electric connection and taking down main switch/SPN DB/TPN DBof any size and keep in safe custody for taking credit complete and good/levelling the disturbed surfaces of wall to match with existing surface, complete all as specified & directed. 124 Material & Labour for framed brackets of angles or tees with web and falnges cut into shape, drilled/welded, screws, rivits and plates as per required size at site with hanles etc in mild steel including two coat of paint over a coat of red oxide, complete all as specified & directed. 125 Material & Labour for concealed Point wiringwith 1.5 sqmm single core PVC insulted FRLS cable 1100 volts grade multistrandedcopper conductor drawn through in and including 20mm dia PVC rigid non metallic conduit concealed with all accessories such as internal bend, end caps etc complete concealed in walls and surface in ceiling/roof/etc including 1.5 Sqmm single core PVC insulated FRLS cable 1100 volts grade with multistranded copper conductor cable as earth continuity conductor including fabricated branded modular metal flush box concealed in walls with suitable modular plate with cover with suitable screws for housing switches, socket outlets, fan regulators etc for one light / bell point controlled by one, one way switch, complete all as specified and as directed. Note: Cutting chases will be Measured and paid seperately. 126 Material & Labour for concealed Point wiringwith 1.5 sqmm single core PVC insulted FRLS cable 1100 volts grade multistrandedcopper conductor drawn through in and including 20mm dia PVC rigid non metallic conduit concealed with all accessories such as internal bend, end caps etc complete concealed in walls and surface in ceiling/roof/etc including 1.5 Sqmm single core PVC insulated FRLS cable 1100 volts grade with multistranded copper conductor cable as earth continuity conductor including fabricated branded modular metal flush box concealed in walls with suitable modular plate with cover with suitable screws for housing switches, socket outlets, fan regulators etc for one ceiling/exhaust fan point controlled by one, one way switch, complete all as specified and as directed. Note: Cutting chases will be Measured and paid seperately. 127 Material & Labour for concealed Point wiringwith 1.5 sqmm single core PVC insulted FRLS cable 1100 volts grade multistrandedcopper conductor drawn through in and including 20mm dia PVC rigid non metallic conduit concealed with all accessories such as internal bend, end caps etc complete concealed in walls and surface in ceiling/roof/etc including 1.5 Sqmm single core PVC insulated FRLS cable 1100 volts grade with multistranded copper conductor cable as earth continuity conductor including fabricated branded modular metal flush box concealed in walls with suitable modular plate with cover with suitable screws for housing switches, socket outlets, fan regulators etc for one light point controlled by two 2 way swithch, complete all as specified and as directed. Note: Cutting chases will be Measured and paid seperately. 128 Material & Labour for concealed Point wiringwith 1.5 sqmm single core PVC insulted FRLS cable 1100 volts grade multistrandedcopper conductor drawn through in and including 20mm dia PVC rigid non metallic conduit concealed with all accessories such as internal bend, end caps etc complete concealed in walls and surface in ceiling/roof/etc including 1.5 Sqmm single core PVC insulated FRLS cable 1100 volts grade with multistranded copper conductor cable as earth continuity conductor including fabricated branded modular metal flush box concealed in walls with suitable modular plate with cover with suitable screws for housing switches, socket outlets, fan regulators etc for one05 Amps socket outlet pointon same board, complete all as specified and as directed. Note: Cutting chases will be Measured and paid seperately. 129 Material & Labour for concealed Point wiringwith 1.5 sqmm single core PVC insulted FRLS cable 1100 volts grade multistrandedcopper conductor drawn through in and including 20mm dia PVC rigid non metallic conduit concealed with all accessories such as internal bend, end caps etc complete concealed in walls and surface in ceiling/roof/etc including 1.5 Sqmm single core PVC insulated FRLS cable 1100 volts grade with multistranded copper conductor cable as earth continuity conductor including fabricated branded modular metal flush box concealed in walls with suitable modular plate with cover with suitable screws for housing switches, socket outlets, fan regulators etc foroneswitch socket outlet point 5 Amps on independent board, complete all as specified and as directed. Note: Cutting chases will be Measured and paid seperately. 130 Material & Labour for concealed Point wiringwith 1.5 sqmm single core PVC insulted FRLS cable 1100 volts grade multistrandedcopper conductor drawn through in and including 20mm dia PVC rigid non metallic conduit concealed with all accessories such as internal bend, end caps etc complete concealed in walls and surface in ceiling/roof/etc including 1.5 Sqmm single core PVC insulated FRLS cable 1100 volts grade with multistranded copper conductor cable as earth continuity conductor including fabricated branded modular metal flush box concealed in walls with suitable modular plate with cover with suitable screws for housing switches, socket outlets, fan regulators etc for one 3 pin socket outlet, 15 Amps on independent board, complete all as specified and as directed. Note: Cutting chases will be Measured and paid seperately. 131 Material & Labour for concealed Point wiringwith 4 sqmm single core PVC insulted FRLS cable 1100 volts grade multistrandedcopper conductor drawn through in and including 20mm dia PVC rigid non metallic conduit concealed with all accessories such as internal bend, end caps etc complete concealed in walls and surface in ceiling/roof/etc including 4 Sqmm single core PVC insulated FRLS cable 1100 volts grade with multistranded copper conductor cable as earth continuity conductor including fabricated branded modular metal flush box concealed in walls with suitable modular plate with cover with suitable screws for housing switches, socket outlets, fan regulators etc for one light / bell point controlled by one, one way switch, complete all as specified and as directed. Note: Cutting chases will be Measured and paid seperately. 132 Supply & Fixing Switch Modular 6A single pole, one way, 1 module complete all as specified and as directed. 133 Supply & Fixing Switch Modular 6A single pole, two way, 1 module complete all as specified and as directed. 134 Supply & Fixing Switch Modular 16A single pole, one way, 1 module complete all as specified and as directed. 135 Supply & Fixing Modular Modular Bell Push 6A 1 Modulecomplete all as specified and as directed. 136 Supply & Fixing Socket, 6A - 2/3 pin combined 2 module complete all as specified and as directed. 137 Supply & Fixing socket Modular 6/16A 2/3 pin combined 2 module complete all as specified and as directed. 138 Supply & Fixing Modular fan regulator step type 120 W, 2 module complete all as specified and as directed. 139 Supply and fixing LED lights fitting 1 x 18/ 20W, 220V,AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete. 140 Supply and fixing LED light fitting mirror type withhigh out put diffuser 2 feet10 watt 220 V ACdecorative type with driver holder and LED lampincluding connecting up with three core flexiblecopper conductor cable of suitable size complete. 141 Supply and fixing LED luminaire roud/squre shape 15 watts 220 V AC surface/recessed type with hight efficiency PMMA diffuser soft glare free light complete with driver, holder & LED lamp suitable for foof ceiling/surfaceincluding connecting up with driver three core flexible copper conductor cable of suitable size complete. 142 Supply and fixing LED luminaire 600 mm x 600 mm 35/36 watts 240 V AC recessed/surface type with high efficiency PMMA diffuser soft glare free lightcomplete with driver holders & LED lamp suitable for any type of ceiling including cionnecting up with driver three core flexible copper conductor of suitable size all as directed. 143 Supply and fixing LED street light fitting 35 watt 230 V AC outdoort type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protectionincluding necessary mountingbracket with nut bolts and mounting on wall or roof etc including taking down unserviceable fitting all as directed. 144 Supply & Fixing Call Bell Ding Dong AC 230 V single polecomplete connecting up withflexible copperconductor cable of suitable size. 145 Supply and fix MCB DB, TPN, 4 ways, Double door, 415 volt, isolated neutral bar with IP54 protection, door earthing arrangement with cement spill protector, mechanical impact strength IK09 complete. Make: L&T/Legrand/ Havells 146 Supply and fix MCB DB, vetical MCCB as a incommerTPN, 8ways, Double door, 415 volt, isolated neutral bar with IP 43protection, door earthing arrangement with cement spill protector, mechanical impact strength IK09 complete. Make: L&T/Legrand/ Havells 147 Supply and fix MCB DB, SPN, 12 ways, double door, 240 volt, Isolated neutral bar with IP54 protection, door earthing arrangement with cement spill protector, mechanical impact strength IK09 complete. Make: L&T/Legrand/ Havells 148 Supply and fix MCB DB, SPN, 4 ways, double door, 240 volt, Isolated neutral bar with IP54 protection, door earthing arrangement with cement spill protector, mechanical impact strength IK09 complete. Make: L&T/Legrand/ Havells 149 Supply and fix MCCB 415 volts 16 KAfour pole suitable for vertical TPN of capacity 125 amps including taking down unserviceable MCCB all directed 150 Supply and fix MCB SP 6 to 32 Amps, 240Volts, 10 KA, B Curve complete. Make: L&T/Legrand/ Havells 151 Supply and fixing SPN 32 Amp rating 240 V, 10 KA C curve miniature circuit breaker (MCB) complete. Make: L&T/Legrand/ Havells 152 Supply and fixing TPN/FP 40 to 63 Amp rating 415 V, 10 KA B curve miniature circuit breaker (MCB) complete. Make: L&T/Legrand/ Havells 153 Supply and fixing DP/TP40 to 63 Amp rating 415 V, 10 KA B curve miniature circuit breaker (MCB) complete. Make: L&T/Legrand/ Havells 154 Supply and fix ceiling rose surface type bakelite 65 x 50mm with three terminals. 155 Supply and laying PVC non metalic conduit including tees, bends, elbows, reducers, and fixing accessaries etc for telephone/TV connection of size 20 mm dia all as directedNote (i) Cutting chaseswill be Measured and paid seperately (ii) TV/Telephone cable provide by user section . 156 Supply and fixingPVC non metalic junction boxes one to fourway for telephone/TV connection of size 20 mm dia all as directed 157 Supply and fix modulartelphone socket RJ 11 one module including taking down unserviceable socket all as directed 158 Supply and fix modularTV coaial socketone module including taking down unserviceable socketall as directed 159 Supply and fix pre wired powerunit with 20 amps mimi MCB and plug top for ACincluding taking down unserviceable socket all as directed 160 Material &Labour for concealed Sub main wiring by making recess in wall/surface complete with 2 runs of 6 Sqmm single core PVC insulated FRLS cable 1100 volts grade multistranded copper conductor cable with 1 run of 6 Sqmm single core PVC insulated FRLS cable 1100 volts grade, multistranded copper conductor cable as earth continuity conductor, drawn through and including 25 mm or higher dia non metallic rigid PVC conduit and conduit accessories suface/concealed in wall/Ceiling etcfrom Main DB to MCB DB all as specified and as directed. Note :- 2 runs of 6 sqmm, + 1 run of 6 sqmm (Earth Cotinuity conductor) and 1 run of PVC conduit shall be measured as one unit length. 161 Material &Labour for concealed Sub main wiring by making recess in wall/surface complete with 4 runs of 6 Sqmm single core PVC insulated FRLS cable 1100 volts grade multistranded copper conductor cable with 1 run of 6 Sqmm single core PVC insulated FRLS cable 1100 volts grade, multistranded copper conductor cable as earth continuity conductor, drawn through and including 25 mm or higher dia non metallic rigid PVC conduit and conduit accessories suface/concealed in wall/Ceiling etcfrom Main DB to MCB DB all as specified and as directed. Note :- 4 runs of 6 sqmm, + 1 run of 6 sqmm (Earth Cotinuity conductor) and 1 run of PVC conduit shall be measured as one unit length. 162 Material &Labour for concealed Sub main wiring by making recess in wall/surface complete with 2 runs of 4 Sqmm single core PVC insulated FRLS cable 1100 volts grade multistranded copper conductor cable with 1 run of 4 Sqmm single core PVC insulated FRLS cable 1100 volts grade, multistranded copper conductor cable as earth continuity conductor, drawn through and including 25 mm or higher dia non metallic rigid PVC conduit and conduit accessories suface/concealed in wall/Ceiling etcfrom Main DB to MCB DB all as specified and as directed. Note :- 2 runs of 4 sqmm, + 1 run of 4 sqmm (Earth Cotinuity conductor) and 1 run of PVC conduit shall be measured as one unit length. 163 Material &Labour for concealed Sub main wiring by making recess in wall/surface complete with 2 runs of 2.5 Sqmm single core PVC insulated FRLS cable 1100 volts grade multistranded copper conductor cable with 1 run of 2.5 Sqmm single core PVC insulated FRLS cable 1100 volts grade, multistranded copper conductor cable as earth continuity conductor, drawn through and including 25 mm or higher dia non metallic rigid PVC conduit and conduit accessories suface/concealed in wall/Ceiling etcfrom Main DB to MCB DB all as specified and as directed. Note :- 2 runs of 4 sqmm, + 1 run of 4 sqmm (Earth Cotinuity conductor) and 1 run of PVC conduit shall be measured as one unit length. 164 Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills,sunshades, shelves, lintels, etc and cutting chases for concealed conduit wiring,etc and making good, cutting not exc 10 cm girth 165 Demolition and breaking up drain pipes (salt glazed ware, PVC , AC or reinforced concrete) set in cement mortar of size 100 mm/ 75 mm orfixed with clamps, all as specified & directed. 166 Demolition of brickwork or stone/boulder masonary, build in cement mortar or cement lime mortar including all quoins, arches, pillars, etc, butall as specified 167 Demolition of cement concrete (unreinforced) in ground floors and pavings not exceeding 15 cm thickness (below or above ground level) all as specified & directed. 168 Demolition of cement concrete (unreinforced) of any description and in any position ( including taking down existing tar felt/ / WPT carefullyif necessary) completeall as specified and directed.
