Tender For Special Repair To Building No P-90 In The Aor Of Age B R Iii Under Ge 874 Ews Job No W Sr Bldg Xxi Zangli 2025-26.; 1 Dismantling plain or corrugated steel sheeting,any gauge ,thickness including Nainital or similar patternroof covering complete all as specified and directed. 2 S&F pre- painted galvatumealuminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. 3 Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. 4 Demolition of stone slabs and tiles of any laid bedded and pointed in any mortardescription or thickness in floors, wallsaprons etc. complete all as specified and directed. 5 M&L 75 mm thick PCC 1:3:6, type C-2 (using 20 mm graded crushed stone aggregate) as in plinth protection finished even aned fair without using extra cement complete all as specified and directed. 6 M&L for 50 mm mm thick PCC 1:2:4, type B-0 (using 12.50 mm graded stone aggregate) for floor complete all as specified. 7 Dismantling floor ,hearth or wall tilling including cement mortar bedding removing serviceble tile to rubbish of the premises complete all as specified and directed. 8 M&L machine cut Kota stone flloring 20-25mm thick over 20mm thick cement screed 1: 6 base alid and jointed with grey cement slurry mixed with pigment match the shade of the slab including rubbing and polishing complete all as specifed and directed. 9 M&L for Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with ditto as above as specifiedover 10mm thick rendering in Cement Mortar 1:4 complete all as specified & directed. 10 M&L for cement concrete 1:2:4, type B-1 (using 20 mm graded stone aggregate) 25 mm thick as in sub basenover rammed earth complete all as specified. 11 M&L for non skid ceramic coloured tiles 7-8 mm thick, area exc 0.11sqm but nexc 0.18 sqm of each tile in floor etc set & jointed in neat cement slurry and pointed in white or coloured cement to matchthe colour oftile on 15mm thick screed bed in Cement Mortar 1:6 complete all as specified and directed. 12 M & L forGlazed ceramic coloured tiles (450 x 300 x7mm)thick, as in vertical surface such as in skriting and dado etc, set & jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles, over 10mm thick rendering in Cement Mortar 1:4 complete all as specified & directed. 13 Dismantling wall and ceiling boards or insulation boards/slabs/blankets, any thickness including cover fillet complete all as specified and directed. 14 M&L plywood grade BWR type BB, 9 mm thick fixed with nails to timber frame work in ceiling complete all as specified and directed. 15 M&Lplain fillets 2nd class soft wood of exc. 3 & n exc. 6 Sqcm, square rectangular or triangular in section , clean swan, secured nails complete all as specified and directed. 16 M&L second class soft wood in scantling clean swan complete all as specified and directed. 17 M&L for Preparation of newly un treated surfaces andapplyingtwo coat of synthetic enamel paint over a coat of pink primer on wooden surfaces of any description not other wise described over 10 cm width or grith etc complete all as specifed and directed. 18 M&L for Preparation of old painted surfaces andapplyingone coat of synthetic enamel paint on wooden surfaces of any description not other wise described over 10 cm width or grith etc complete all as specifed anddirected. 19 Taking down cement or cement lime plaster on brick or stone walls, any discription, including raking out joints, hacking for key, scrubbing down with water, etc.complete all as specified and directed. 20 Supply only integral water proofing compound complete all as specified and directed. 21 M&L for 15mm thick rendering in cement mortar 1:6 on any faces of brick or concrete surfaces of walls & finishing the surface even and smooth without using extra cement complete all as specified and directed. 22 M&L for rendering 10 mm thick on fair faces of brick work or concrete surfaces orother than fair face of brick work in CM 1:4 and finishing in wall complete all as specified and directed by Engr-in-Charge. 23 M&L for rendering 10 mm thick on fair facesof brick work or concrete surfaces orother than fair face of brick work in CM 1 : 4 and finishing in cellingcomplete all as specified and directed by Engr-in-Charge. 24 M&L for preparation New or undecorated surface of walls and applyingtwo coats of cement base paint over a coat of alkali resistant primer complete all as specifed and directed. 25 M&L for preparation old or undecorated surface of walls and applyingtwo coats of cement base paint over a coat of alkali resistant primer complete all as specifed and directed. 26 M&L for preparation of old plastered surfaces of wall and applying two coat of oil bound distemperall as specified. 27 M&L for preparation of New plastered surfaces of wall and applying two coat of oil bound distemperall as specified. 28 M&L for preparation old or undecorated surface of Celling and applyingtwo coats of White Washcomplete all as specifed and directed. 29 M&L for preparation new or undecorated surface of walls and applyingtwo coats of White Washcomplete all as specifed and directed. 30 M&Lfixed in repairs 18/19 mm thick Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & otherside balancing white lamination, fixed with screws to timber framework including external teak wood lipping 6 mm thick, complete all as specified and directed. 31 Taking down chowkat with shutters exc.1.5 Sqm but n exc.4 Sqm (without taking off shutters from chowkhat) complete all as specified and directed. 32 Taking down chowkat with shutters n. exc.1.5Sqm (without taking off shutters from chowkhat) complete all as specified and directed. 33 Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing 34 Solid PVC frame (Single Rebated) of size 60mm x 30mm made out of solid PVC foam with homogenous fine cellular structure having smooth outer integral skin with suitable metal stiffner and fixed with 100 x 8 sheet metal CSK screws complete all as specified and as shown on drawing (Note :- Door frame shall be water proof, termite proof, elegant and should have excellent screws holding strength to fix hinges and hold doors properly for a long life) 35 S&F 2nd class soft wood plain solid straight chowkats and frames wrought framed, rebated on the solid all as specified. 36 Plain, framed, panelled shutters second class soft wood 35 mm thick(any number of panels), with panels of timber flat on both sides(feather edged), or of veneered particle board medium density, wood particle board with commercial faceveneers: supplied and fitted to chowkats 37 S&F glazed and skeleton shutters, second class soft wood 30 mm thick open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and directed. 38 Hacking out old broken glass (any thickness, size quality of description) from wooden frames or stone, concrete or brick sorrounds, glazad with putty or fixed with beeds complete all as specified. 39 03mm thick Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq.m in each pane complete all as specified. 40 S&F 100 mm long butt hinges extruded aluminium anodised complete all as specified and directed. 41 S&F 75 mm size mild steel butt hingesmedium weightcomplete all as specified and directed. 42 S&F 150mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and directed. 43 S&F 100 mm long aluminium anodised barrel tower bolt of exturded section complete all as specified and directed. 44 S&F aluminium anodised alloy handles fabricated type 150mm size of handle complete all as specified and directed. 45 S&F 100 mm long aluminium handles cast type anodised complete all as specified and directed. 46 S&F 300mm long aluminium alloy, anodised sliding door bolt, with hasp and staple (bolt type) cast or extruded section and fixing bolts of extruded section complete all as specified and directed. 47 S & F in Stainless Steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and directed. 48 S&F for Vitreous China urinals, bowl type (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. inclof fixing supply pipe to flushing cistern, trap and waste pipe complete all as specified and directed. 49 S&F in repair Urinal spreader of CP any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms) complete all as specified and directed. 50 S&F in repairs Vitreous China Ware Wash hand basin white flat back size 550mmx400mm including pedestal, cutting for and pinning ends of brackets or erecting stand including necessary PVC outlet pipe, CP coupling 32mm diacomplete all as specified. 51 S&F inrepairs Vitreous china premium/ 1st quality wash down water closet wall hung EWC white/ ivory/off white (closed pattern incl all necessary accessories like rag bolts/ gel gasket etc. (excluding flushing cistern & flush pipe) in all respect complete all as specified and directed. 52 S&F in repairHealth flucet (ABS Body) mild steel Cr plated suitable for 15 mm dia pipe with 1.25 m long tube complete all as specified and directed. 53 S&F in repairs vitreous china squatting pan Orissa pattern size 580x440mm white with integral foot rests (excluding flushing cistern and flush pipe) including connection to trap and to flushing system anti syphonage pipe etc complete all as specified and directed 54 S&F in repairsPVC valveless,syphonic action type, low level PVC flushing cistren 10 ltr capwhite with flush pipe & all fittingcomplete all as specified. 55 S&F in repairs Bib taps cast copper alloy ,chromium plated,with crutch or butterfly handle screwed down screwed for iron pipe or brass ferruleof 15mm bore, in repair complete all as specified and directed. 56 S&F in repairs pillar tap cast copper alloy, fancy type with capstan headschromium platedscrewed downwith high pressure with orwithout lettered hotor cold with long screwed, shanksand fly nutsscrewed for iron pipe 15mm dia complete all as specified and directed. 57 S&F Stop valves cast copper alloy,fancy type ,chromium plated, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unionsof 15mm bore pipe,in repair complete all as specified and directed. 58 S&F in repairs two way angular stop cock chromium plated 15mm dia complete all as specified and as directed by Engr-in-Charge. Make : Cera/Jaquar/Essco or its equivalent. 59 S&F ball valves, high pressure,with polythene float and flynut complete,20mm bore ,in repair complete all as specified and directed. 60 S&F 20mm bore gun metal globe or gate valve with iron wheel head, screwed both ends in repair complete all as specified and directed. 61 S&F rotational moulded polythene water storage tank (Cylindrical vertical withclosed top)hoisted and fixed in position of 1000 ltrs capacity fixed with PVC tank nipples,complete all as specified in SSR Part I. complete all as specified and directed. 62 S&F PVC connection 15mm dia and 600mm long with PTMT nuts and washer complete all as specified. 63 S&F PVC connection 15 mm length 450 mm fixed, in repairs complete all as specified and directed. 64 Taking up or down 15mm diaGI steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed. 65 Taking up or down 20mm diaGI steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed. 66 S&F GI tube 15 mm diamedium grade galvanished with all fittings laid in floors /wall etc. complete all as specified and directed. 67 S&F GI tube 20 mm dia medium grade galvanished with all fittings laid in floors /wall etc. complete all as specified and directed. 68 S&F 600 x 450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial ply wood and fixed to wooden plug with chromium plated brass screws and cup washers complete all as specified and directed. 69 Demolition of Brick/stone masonry, built in cement mortar including all quoins, arches, pillars etc but excluding ashler facing, dressed stonework and precast concrete articles 70 M&L for brick work with sub class B bricks straight or curved on plan exceeding 6 M mean radius built in cement mortar 1:4 Complete all as specified and directed. 71 S&F Grating doom 125 mm dia with waste hole of PTMT. (Minimum weight 40gms) complete all as specified and directed. 72 S&F in repairTowel Rail 450mm long of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 170gms) complete all as specified and directed. 73 S&F lagging to 15mm bore pipes used in internal water supply or plumbing all round with, 25mm thick bonded mineral wool preformed SNAPON pipe section of density 144 Kg cum conforming to IS 9842 alongwith chiken mesh wire netting 25 guage , 20 mm mesh fixed in repairs complete all as specified and directed. 74 All as per ser item No 73 here-in-before but 20mm bore pipe complete all as specified and directed. 75 Dismantling of rain water pipe and sewage line pipe of any type and any size including fitting complete all as specified and directed. 76 S&F 75mm bore PVC (SWR) pipe single socket in any length with rubber ring jointed, fixed to wall complete all as specified.( PVC Pipe 2kg/cm2 ,Thickness 1.8mm to 3.8 mm) 77 S&F 110mm bore PVC (SWR) pipe single socket in any length with rubber ring jointed,fixed to wall & Floor complete all as specified.( PVC Pipe 2kg/cm2 ,Thickness 1.8mm to 3.8 mm) 78 S&F 110mm bore PVC (SWR) bend or tee orradius complete all as specified. 79 M&L for PVC (SWR) WC connector with lip ring 110mm complete all as specified and directed. 80 M&L for PVC (SWR) vent cowl for 75 mm dia all as specified. 81 Treatement for sunken portion is as follows :-(a) Demolition of lean concrete and other type of filling in sunken portion & cleaned the sunken portion incl vertical wall surface complete as directed.(b) Maintain the Sunken to a slope of 1:40 outward with 32mm dia GI pipespout projecting at least 150 mm beyond outer face of wall.(c) Top of the sunken floor slabs shall be laid to a slope 1:40. Thesurface of RCC slab shall be made even and smooth by using extra cement while the concreteis still green. Concave fillet in PCC (1:2:4) type B0 of radius 75 mm shall be providedat the junctions of RCC slab and adjoining walls. (d) M&L .Floor and side walls upto the finished floor level shall be plastered with 15 mm thick CM (1:4) mixed with water proofing compound @ 3% by weight ofcement. Over plastered surfaces,M&L for applyin evenlytwo coats of industrial bitumen 85/25 at the rate of 1.20 Kg/Sqm in each coat over vertical surfaces and floors of sunken floors of toilet including cleaning of surfaces a layer of APP based polymeric membrane not less than 3mmthick, weighing not less than 3 kg per sqm, reinforced withpolyster non- wovenfabric (weighing not less than 150 gm per square metre) shall be laid by torchapplication. Side overlaps shall be 100mm and the ends laps shallbe 150mm andoverlap joints shall also be sealed by torch application.(e) The sunken portion shall be filled with lean cement concrete (1:5:10), typeE2 using 40 mm brick aggregate after carrying out satisfactory testing of CI pipes /joints and slabs / walls by filling water for 72 hours. The sunken portion ofNahani / floor trap and pipe joints shall be embedded in PCC (1:3:6) blocks.(f)32 mm dia GI spout shall be provided to drain out leakage, if any. 82 M&l For Wire brushing and cleaning top surface of tiles, lime terracing or cement concrete, including flashings and junction ofparapets, etc., and surface painting, with a layer of blown grade bitumen of any penetration applied hot @ 1.7 kg per sq.m, blinded with grit or pea size gravel @ 0.006 cu.m per sq.m, and lightly tampered (area of flashings, etc., shall be added tothe roof area).a)APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) land on primed surface by forced application complete all as specified 83 S&F Vitreous china urinal partition white of size 310x700 mm. 84 M&L PVC(SWR) floor trap, 75mm dia outlet, plain with grating including jointing with solvent cement 85 Taking down carefully copper/ aluminium unserviceable/ perished point wiring (light, fan, socket or power complete including fixture and fittings such as switches, ceiling roses, pandents, regulators, sockets, light fittings,removing material from site for taking credit etc and making good disturbed surfaces of wall, floors, complete all as specifiecd and directed. 86 Taking downMCB DBs complete with MCBs/Isolator etc removing materials from siteand making good disturbed surface of walls, floors etc. complete all as specified and directed. 87 Disconnecting unserviceable sub main wiring/service connection of any size and including steel conduit and accessories and removing from site and making good the disturbed surfaces complete all as specified and directed 88 Point wiring for one light point/fan point controlled by one switch with 1.5 sqmm PVC (FR-LS-H) insulated un-sheathed copper conductor single core multi strand flexible cable and 1.5 sqmm PVC (FR-LS-H) insulated un-sheathed copper conductor single core multi stranded flexible cable (green color) as earth lead in and including cable 1100 volts grade including casing and capping (ISI marked) for one light/ fan point including 2nd class hard wood rectangular block open recessed cover with 3mm thick plastic laminated sheet cover including cutting chases to wall making good the disturbed surfaces to match with theexisting specification complete all as specified. 89 All as per ser item No 89 here-in- before but wiring with 1.5 sqmm copper wire ( FR-LS-H)and 1.5 sqmm earth wire for socket outlet 3 pin 5 amps on same board. 90 All as per ser item No 89 here-in- before but wiring with 1.5 sqmm copper wire ( FR-LS-H)and 1.5 sqmm earth wire for socket outlet 3 pin 5 amps on independent board. 91 All as per ser item No 89 here-in- before but wiring with 2.5 sqmm copper wire ( FR-LS-H)and 1.5 sqmm earth wire for socket outlet 6 pin 15 amps on independent board. 92 S&Fswitch piano flush button single pole, one way 5 amps complete all as specified and directed. 93 S&F switchsocket combination 2 in 1,5A, flush type . 94 S&F switchsocket combination 5 pin 16A, flush type . 95 S&F LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed. 96 S&F LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. 97 S&F Exhaust fan made of sturdy engineering plastic complete with louvers shutter, voltage 230v , 50HZ , RPM 1200, Copper winding of sweep 300mm, with 2 years warrenty complete all as specified and directed. 98 S&F ceiling rose with earth terminal connection, 3 terminal/ PVC/ polycarbonate, isolated body complete all as specified and directed. 99 S&F 09W/10W Bulk head liminiares including LED light driver holder connectingup with three core flexible copper conductor cable of suitable size complete all as specified and directed. 100 S&F LED Bulb 9 Watt all as specified and directed by Engr-in-Charge. 101 M&LLamp holder, PVC/Polycarbonate type with cord grip cap suitable for pendant fittings complete all as specified and directed. 102 S&F MCBs single pole 240 volts 6 to 32Amps 10 KA Ccurve series, all as specified and as directed by Engr -in-Charge. 103 S&F of MCB SPN, 240 volt, 63 Amp capacity, 10 KA, C curve .all as specified and as directed by Engr -in-Charge. 104 S&F of distribution board single pole & neutral with 200 Amps rated bus bar,for double door IP-42 DBs ,made outof sheet steel enclosure, recessed type, factory made powder coated 8 way -240 volts suitable for housing MCBs and isolators complete in all fixing material/accessories etc complete all as specified and directed. 105 Wiring for circuit/submain wiring alongwith earth wire with the following sizes of FR PVC insulated copper conductor, single core cable in surface/recessed as required in PVC casing caping of size 2x2.5 sq. mm + 1x1.5 sq. mm earth wire complete all as specified and directed. 106 Earthing complete with galvanised steel earth plate electrode 60x60cmx6.3 mm thick burried directly in ground (earth pit not less than 2.25 mtr deep below ground level)with top edge lead of the platenot less than 1.5 mtr below normal ground level, connected galvanised earrth lead wire 4.0mm dia by means of bolts, nuts,check nuts and washers of galvanised iron or steel all as shoen in Electrical plate No 3 connected to earthing test point all as specified or indicated including earth work complete and testing on completion complete all as specified and directed.. 107 S&F electric water Heater, storage type steel body with copper inner tank and and heating element upto 2 KW capacity 50 liter , BEE 5 Star rated complete with all accesries such as safety valve, thermostate, NRV, connection piece etc. 108 Taking down carefully copper/ aluminium unserviceable/ perished cable any size ,removing material from site for taking credit etc and making good disturbed surfaces of wall, floors, complete all as specifiecd and directed. 109 Taking downMCCB and DBs complete etc removing materials from siteand making good disturbed surface of walls, floors etc. complete all as specified and directed. 110 S&F with renewal of MCCB 4 Pole, 415 V, Adjustable type, 160 Amps with breaking capacity 36 KA, all as specified and directed by Engr-in-Charge. 111 Supply, Laying , jointing and testing with renewal of LT underground cable, heavy duty, 1100 Volts, XLPE insulated and sheathed, armoured with multi-stranded aluminium conductor cable 35 sqmm3.5 core, laid in trenches/ducts or fixed to poles/walls or laid under roads/paths/drains/culverts duly encased in galvanised steel pipe of suitable sizes including cable gland of suitable sizesand aluminium lugs for connection complete all as specified and directed. 112 Excavation in trenches not exceeding 1.50m wide and not exceeding 1.50m depth for foundation ,laying of cables/pipes/poles etc., and getting out in hard/densesoil complete all as specified and directed. 113 Returning filling in including spreading levelling watering and well ramming in layers not exceeding of 25 cm thick in soft/loose soil complete all as specified and directed 114 Removal of surplus soil as obtained from excavation to a distance not exc. 50 Mtr and depositing where directed at a level not exc. 1.5 Mtr above the starting point all as specified and directed. 115 Supply and laying dry river sand for cable cushioning in trenches to required width at bottom and top of cable including spreading levelling watering and consolidation complete all as specified and directed by Engineer-in-chargeNote:-Punned thickness only shall be measured and paid. 116 Supply and laying old size brick covering with width equal to length of brick as the mechanical protection to cable with well burnt sub class B laid in trenches flat complete all as specified and directed by Engineer-in-charge. 117 S&F light grade, galvanised 50 mm bore mild steel pipe / tubing, complete with all fittings, laid under roads, drain, paths, fixed to poles/ walls with suitablemild steel clamps , bolts , nuts and washers complete all as specified and directed as for cable proction of following sizes:-.(Note:- Excavation & earth work shall be measured and paidfor separately under appropriate item of this schedule ):-
