Sales : +91-777 804 8217
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 28-11-2025 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 05-12-2025 |
| Sl. No. | Item Description |
| 1 | Dismantling of plain or corrugated steel sheeting , any gauge and thickness in roof covering including Nainital or similar pattern roof covering complete all as specified. |
| 2 | S&F pre- painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified. |
| 3 | S&F Pre-painted galvalume aluminium zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified. |
| 4 | Dismantling wall and ceiling boards (fibre, pulp, insulation, etc) or insulation boards/slabs/ blankets,any thickness, cover fillets etc all as specified and directed. |
| 5 | M&L 4 mm thick veneered decorative, plywoodgrade 1 (BWR resin) with decorative face veneers on one faces , fixed with nails to timber frame work on ceiling complete all as specified and directed. |
| 6 | M&L 4 mm thick veneered decorative, plywoodgrade 1 (BWR resin) with decorative face veneers on one faces , fixed with nails to timber frame work on wall. all as specified and directed. |
| 7 | Dismantling of timber scantling 40 Sqcmand over in section in any position in unframed work complete all as specified and directed |
| 8 | M&L for second class soft wood (Kail) clean swan timber fixed in scantling complete all as specified and directed |
| 9 | Dismantling of timber fillets rails, posts rafter purlins etc under 40 Sqcm in section in any position in framed work complete all as specified and directed. |
| 10 | S&F second classhardwood plain fillets square, rectangular in section exc 13 Sqcm & not exc 25 Sqcm complete all as specified and directed. |
| 11 | S&F second classhardwood plain fillets square, rectangular in section exc6 Sqcm and not exc 13 Sqcm complete all as specified and directed |
| 12 | Dismantling of boarding any description fixed in any position with nails complete all as specified and directed |
| 13 | S&F facia boarding of 2nd class soft wood planed one side with but joints 20mm thick and champheredone side and the boarding is matched completeall as specified and directed |
| 14 | Demolition of cement concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level)complete all as specified and directed |
| 15 | M&L for 25mm thick PCC 1:2:4 type B-1 (using 12.5 graded aggregate) as in floors finished even and fair complete all as specified and directed. |
| 16 | M&L, Vitrified Ceramic tiles 10 mm thick (square/ rectangular) polishedarea of each tilenot exceeding 0.38sqm, in floors etc. set and jointed in neat cement slurry and pointedin white or coloured cement to match including 15mm thick screed bed or bedding layer in cement mortar 1:6 complete all as specified and directed. |
| 17 | M&L non-skid ceramic tiles7 to 8mm area of each tilenot exceeding 0.38sqm, in floors etc. set and jointed in neat cement slurry and pointedin white or coloured cement to match including 15mm thick screed bed or bedding layer in cement mortar 1:6 complete all as specified and directed . |
| 18 | M&L for 75mm thick cement concrete 1:3:6,type C-2 (using 40mm graded stone aggregate) as in plinth protection complete all as specified and directed. |
| 19 | M&L for complete removal of existing treatment on old wall surfaces & Finishing walls with Acrylic Smooth exterior paint of required shade Now work (Two or more coat applied @ 1.67 Itr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) new surfaces or old decorated surfaces complete all as specified and directed. |
| 20 | Demolition and breaking up drain pipe 75/100 mm dia (AC, salt glazed, PVC or RCC pipes ) set in cement mortar or any description incl excavation of earth, returning filling, removal and making good complete all as specified. |
| 21 | S&F for PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or in floors for 110 mm bore pipe complete all as specified and directed |
| 22 | S&F for PVC (SWR) bend with access door including jointing with solvent cement 110 mm bore complete all as specified. |
| 23 | Taking down chowkhats or frame with shutter (without taking out shutter from the frame) not exceeding 1.50 sqm each and removal from site all as specified and directed |
| 24 | S&F aluminium alloypowder coated aluminium sliding windows three track with movable shutters (sliding on minimum two PVC roller of best quality, for each shutter on three tracks with stainless steel mosquito proofing and glazing shutter and incl 5.50mm thick glass & stainless steel wire mesh fixed with neoprene rubber gasket with aluminium beading clips, frame made with aluminium section as appended below :-(a) Window Frame- 75mmx35mmx1.48mm thick(b) Top/Bottom rail and style/rail of shutter - 38mmx19mmx1.48mm thick and over(c) Aluminium beading /clips - 0.7mm thick(d) Stainless Steel wire cloth 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed in aluminium window or alongwith F/Y section fixed with aluminium fire staples complete.(e)Aluminium fittings such aluminium suitable handle with auto interlocking closing.(f) Making good of wall surfaces to match with existing surfaces complete all as specified and directed. |
| 25 | M&L for applying two coats of synthetic enamel paint over a coat of pinkprimer including preparation of Oldwooden or wood based surfaces over 10cm width or girthetc all as specified and as directed. |
| 26 | Demolition of brick work, PCC block masonry, stone masonry or boulder masonry built in cement mortar complete all as specified and directed. |
| 27 | M&L for brick work with sub class \"B\" bricks (Old size) straight or curved on plan exceeding 6 mtr mean radius built in CM 1:6 complete all as specified |
| 28 | M&L for walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, built in cement mortar 1:6 |
| 29 | M&L rendering 10 mm thick in cement and sand mortar 1:4 on fair faces of brick work or cement concrete surfacesincluding finishing the surface even and smooth without using extra cement complete all as specified. |
| 30 | M&L rendering 15 mm thick in cement and sand mortar 1:4 on stone masonry surfaces or surface other than fair face of brick-work or on one side of lathing with using integral waterproofing compound @ 3% by weight of cement including finishing the surface even and smooth without using extra cement complete all as specified. Note -W P C shall be measured and paid separately. |
| 31 | Preparation of newly plastered surfaces of walls and applying two coats of cement base paintover a coat of primer complete all as specified. |
| 32 | M&L for preparation of new surfaces of walls and applying two coats of Oil bound distemper over a coat of priming on plastered and other surfaces with alkali resistant priming paintcomplete all as specified as directed by engr-in-charge. |
| 33 | M&L for hardcore of gauge not exceeding 63 mm of broken stone, deposited, spread and levelled in layers not exceeding 15 cm thick, watered and rammed to a true surface complete all as specified and directed. |
| 34 | M&L glazed ceramic tile 450 x 300 x 6-7mm thick (coloured) on vertical surfaces such as skirting, dados etc set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles over and including 10 mm thick plaster in cement and sand mortar 1:4 complete all as specified. |
| 35 | Taking down chowkhats or frame exc 1.5 Sqm but n.exc 4 Sqm each with shutters(without taking off shutters from the frames)complete all as specified and directed. |
| 36 | S&F dolid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube, complete all as shown in drawing of relevant item in MES, schedule Part-II , 2010 complete all as specified. |
| 37 | S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails.MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail.Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined togetherwith solvent cement complete all as shown in drawing of relevant item complete all as specified and directed. |
| 38 | S&F steel ventilators with top hung shutter including hinges steel peg stay, squares no.exc 0.50 sqm in each pane complete all as specified and directed. |
| 39 | S&F butt hinges, 100 mm long medium weight, cold rolled mild steel, ISI marked complete all as specified. |
| 40 | S&F 150mm long aluminium anodised, barrel tower bolt ISI marked complete all as specified. |
| 41 | S&F 150mm long aluminium anodised cast typealuminium handle SI marked complete all as specified. |
| 42 | S&F water closet (Orissa pattern) complete including provision of lime concrete bedding including vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) in repairs complete all as specified and directed. |
| 43 | S&F PVC valveless,10 liters symphonic action cistern, low level, white, with inlet, ball valve, float and including brackets and connection to pipes complete all as specified and directed. |
| 44 | S&F 600mm x 450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick commercial quality ply-wood and fixed to wooden plugs with chromium plated brass screws and cup washers complete supplied and fixed complete all as specified and directed. |
| 45 | S&F tubular towel rail brass chromium plated 20mm dia D-Type 60cm long between flanges, including brackets and fixed to walls, complete all as specified and directed. |
| 46 | S&F PVC connection 15 mm size, of length 450 mm, with PTMT nuts supplied and fixed complete all as specified. |
| 47 | S&F 100mm bore PVC (SWR)\"T \"any radius complete all as specified and directed. |
| 48 | S&F 110mm bore PVC (SWR) vent cowl, plain including jointing with solvent cementcomplete all as specified. |
| 49 | S&F 15mm bore Bib taps, fancy type chromium platedwith crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified. |
| 50 | S&F 15mm bore angle valve, fancy type chromium plated high pressure with crutch or butterfly handle screwed both ends for iron pipe complete all as specified. |
| 51 | S&F mild steel framed work such as grills, frame work of water takes FE 290 Gide E-165 complete all as specified and directed. |
| 52 | S&F in repair1000 ltr capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all all as specified in SSR Part -I complete all as specified and directed. |
| 53 | S&F 20mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/ 2 0 m m - 2 1 0 g m s . /25mm-455gms/ 40mm - 690 gms) complete all as specified and directed. |
| 54 | S&F 3 layer PPR pipes 20mm dia abode SDR 7.4 & SDR 11 UV established and antimicrobial welded having thermal stability for hot and cold water complete all as specified and directed. |
| 55 | S&F 25mm PPR gate valve inserted as per requirement of site complete all as specified and directed. |
| 56 | S&F 20mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (min weight 20mm-210 gms) complete all as specified. |
| 57 | S&F in repairCP basin mixer for hot & cold water supply and fixed complete all as specified and directed. |
| 58 | S&F in repair vitreous china wash basin580mmx450mm including waste pipe, coupling and brackets etc complete all as specified and directed. |
| 59 | S&F in repair LLDPE Septic tank exc in ordinary soil foundation in PCC 1:2:4 brick work in CM 1:4 RCC slab covers including RCC precast manhole cover having 6 mm plate embedded all around/fibre reinforced cover with angle iron frame vent shaft and sludge chamber etc complete for 10 userscomplete all as specified as per manufactures instructions complete all as specified and directed. |
| 60 | Construction of soakage wells excavation, in any type of soil, foundation in PCC 1:3:6, walls of honey combed masonry with top ring of M-25 concrete including intercepting chamber and screen chamber made of Brick masonry in CM, RCC cover slab in M25/ SFRC cover, interconnecting pipes of RCC/DWC complete filled with brick bats of size 1.80m dia and 3m depthcompleteall as specified and directed. |
| 61 | S&F 2nd Class Soft wood plain, solid, straight chowkhats and frames, wrought, framed rebated on the solid rounded or chamfered put together with glue pinned at joints all as specified and directed |
| 62 | S&F 2nd class soft wood 35mm thick factory made panelled shutters with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and style as per IS-1003 (Pt-I) kiln seasoned and chemically pressure treated. |
| 63 | MS cold rolled butt hinges medium weight 100 mm long complete all as specified. |
| 64 | S&F 300mm long Aluminium alloy, anodised, sliding door bolts with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast- aluminium alloy all as specified and directed. |
| 65 | S&F 300 mm size mild steel ordinary rat rail rod pattern springs including roller and roller plate complete all as specified and directed. |
| 66 | S&F 200mm long Anodised Aluminium tower bolt complete all as specified and directed. |
| 67 | S&F 150mm long extruded aluminium alloy handle complete all as specified and directed. |
| 68 | M&L chequeredcoloured tile size 300x300x25mmusing table vibrator or equivalentas in jointed and pointed in neat cement slurryover and included 15mm screed cement mortar (1:6) and pigment size conforming complete all as specified. |
| 69 | Taking down plastering on lathing (other than wire-netting), without removing lathing, in cement lime or cement mortar complete all as specified anddirected. |
| 70 | M&L rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 complete all as specified and directed. |
| 71 | M&L for preparation of new surfaces of walls and applying two coats of cement base paint complete all as specified and directed. |
| 72 | M&L for 6 mm thick veneered decorative plywoode,grade 1 (with decorative face veneers on one faces) in ceiling, fixed with nails to timber frame work complete all as specified and directed. |
| 73 | M&L for 6 mm thick veneered decorative plywoode,grade 1 (with decorative face veneers on one faces) on wall, fixed with nails to timber frame work complete all as specified and directed. |
| 74 | M&L plain fillets square rectangular or triangular in section using 2nd class soft wood clean swan secured with nails not exc 3 sqcm in section complete all as specified and directed.. |
| 75 | M&L plain fillets square rectangular or triangular in section using 2nd class soft wood clean swan secured with nails exc 13 sqcm & n.exc 25 Sqcm in section complete all as specified and directed. |
| 76 | S&F in repair 2nd class softwood in scantling clean swan timber framed and fixed to the position including dismantling complete all as specified |
| 77 | S&F SS auto concealed hinges (Zero degree) fully overlay cabinet hinges) fixed complete all as specified and directed. |
| 78 | S&F SS modular kitchen basket accessories & multipurpose utensils cabinet drawer with sliding channel for kitchen wired (consist of set of 06 Nos i.e cutlery basket-01, Cup & saucer-01, Thali basket-02 & Plain basket -03 Nos) fixedcomplete all as specified and directed. |
| 79 | S&F 16mm thick HDHMR waterproof MDF board for cabinets fixed with screws to timber frame work complete complete all as specified and directed. |
| 80 | Taking down chowkhats or frames with shutters (without taking off shutters from the frames) not exceed 1.5 Sqm complete all as specified and directed. |
| 81 | Taking down chowkhats or frames but with shutters (without taking off shutters from the frame) exceed 1.5 Sqm and not exceed 4.00 sqm complete all as specified and directed. |
| 82 | S&F 2nd class soft wood plain, solid, straight chowkhats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed. |
| 83 | M&L Glazed and skeleton shutters thickness 30 mm,(2nd class softwood), open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters supplied and fitted to chowkhats if windows, ventilators, etc. are provided with stiles and rails as in SSR Part I, Section specified 8 clause 8.24(a) complete all as specified and directed. |
| 84 | M&L glazed and skeleton shutters thickness 35 mm,(2nd class softwood), open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters supplied and fitted to chowkhats if windows, ventilators, etc. are provided with stiles and rails as in SSR Part I, Section specified 8 clause 8.24(a) complete all as specified and directed. |
| 85 | M&L for 2nd class 35mm thick Plain frame panelled shutter with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressuretreated complete all as specified anddirected. |
| 86 | Hacking out old broken glass /gauge (any thickness, size, quality or description) from wooden frames or stone concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed. |
| 87 | S&F Sheet glass thickness3.00 mm, ordinary quality and glazing with oil putty in square exceed 0.5 sqm in each pane complete all as specified and directed. |
| 88 | M&L Preparation of new wooden surface of any description and two coat of synthetic enamel paint, not otherwise descri-bed,over 10cm width or girth complete all as specified and directed. |
| 89 | M&L Preparation of old wooden surface of any description and two coat of synthetic enamel paint, not otherwise described, over 10cm width or girth including complete removal complete all as specified and directed. |
| 90 | Aluminium anodised, barrel tower bolts 100 mm of extruded section and fixed complete all as specified anddirected. |
| 91 | Aluminium alloy, anodised, sliding door bolt 200 mm long with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed. |
| 92 | M S Butt hinges 75 mm medium weight, cold rolled mild steel, and fixed complete all as specified and directed. |
| 93 | Aluminium handles 100 mm , cast type, anodised complete all as specified and directed. |
| 94 | S&F Galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed. |
| 95 | S&F Softwood 2nd class Clean sawn with butt joints eaves boards 20 mm thick complete all as specified and directed. |
| 96 | M&L weather boarding, 25 mm thick, wrought both sides, V-jointed to give 20mm laps and fixed complete all as specified and directed. |
| 97 | M&L granite (of any type) tiles 20mm thick machine cut, bedded & jointed with grey cement slurry & pointed with white cement with admixture of pigment to match the shade of granite stone including cutting & polishing types complete all as specified and directed. |
| 98 | Stainless steel sink 1mm thick, without drainage plug, washers,PVC waste pipe, union, CP coupling & cantilever brackets including bedding cement and sand mortar, overall size of sink 915mmx460mm, bowl size 410mmx310mmx160mm complete all as specified. |
| 99 | Demolition and breaking up 100mm PVC/AC drain pipes set in cement mortar all as specified and directed. |
| 100 | PVC (SWR ) pipes,110 mm bore, single socketed, in any length, with rubber joints, fixed to walls complete including fixing clamps etc with nut & bolts incl taking down of pipe complete all as specified and directed. |
| 101 | M&L 50 mm thickness cement concrete 1:2:4, type B-1 (using 20mm graded stone aggregate) as in flooring complete all as specified and directed. |
| 102 | Taking up or down existing steel water tubing, 15mm bore alongwith connections fixed/laid in any situation, complete all as specified |
| 103 | All as per item No 62 here-in-before but 20 mm bore tubing complete all as specified and directed. |
| 104 | M&L for GI steel water tubing, 15mm bore medium grade galvanized with all fittings and fixedto walls and celling or laid in floor, complete all as specified. |
| 105 | All as per item No 64 here-in-before but 20 mm bore tubing complete all as specified and directed.. |
| 106 | S&F repair Bib tap, 15 mm ofcast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed in repairs complete all as specified & directed. |
| 107 | S&F second classsoftwood plain fillets square, rectangular in section exc6 Sqcm and not exc 13 Sqcm complete all as specified and directed |
| 108 | Dismantling of floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified. |
| 109 | M&L non-skid ceramic tiles 7 to 8mm thick area of each tiles exc 0.18m and n.exc 0.38 Sqm in floor etc,Incl screed bed 15 mm thick in CM (1:6) complete all as specified and directed |
| 110 | S&F glazed ceramic coloured tiles in verticals surfaces of size 600x300x7/9 mm thick set and jointed in neat cement slurry and pointedwhite or coloured cement to match tile surface over and including 10 mm thick plaster in cement and sandmortar 1:4, complete all as specified. |
| 111 | M&L for 25mm thick PCC 1:2:4, type B-1 (using 20 graded stone aggregate) as in floors finished even and fair complete all as specified and directed.. |
| 112 | M&L forKota stone slabs, 20mm to 25mm thick, machine cut as in flooringof size not less than 0.25 Square metre each, set and jointed in cement slurry and pointed in cement mixed with pigment to match the shade of slab laid over & including screed bed of 15 mm thick in cement mortar 1:4 including rubbing, cutting and polishing (mirror type), complete all as specified. |
| 113 | Taking down chowkhats or frame exc 1.5 Sqm but n.exc 4 Sqm each with shutters(W/out taking off shutters from the frames) complete all as specified |
| 114 | S&F Sheet glass ordinary quality & glazing with oil putty in square n-exc. 0.5 sqm in each pane 3mm thick including hacking out broken or old glassComplete all as specified & directed. |
| 115 | M&L for applying two coats of synthetic enamel paintincluding preparation of OldSteel or Steel based surfaces over 10cm width or girthetc all as specified and directed. |
| 116 | M&L for waterproofing and repair of leakage/seepage treatment to external wall complete all as specified and directed :- (a) Step 1 - Taking down cement plaster of any descriptionby manual and mechanical means, plumbing treatment of pipesetc including racking out joints hacking for key, scrubbing down with water etc. and (b) Step 2 - applying waterproofing treatment to slab/ wall area with assign paints smart careDamp Block 2k @1.5kg/sqm, Damp block 2k is atwo component elastomeric cementations coating conforming to ASTM D 412 & ASTM D 4548.5 standards including all necessary surface preparation, etc. complete as per manufacturers specifications and application methodology. The same coating shall be applied in two coats achieving a total thickness of 1.0mm. The coating shall have a 100% elongation and crack bridging upto 1.2mm as per ASTM D4548.5. (c) Step 3- Over and above Asian Paints Smart care Damp block 2k applying plaster minimum 12mm thick. SC REPAIR MORTAR.Makes ( BASF, Asian Paints, Sika, Fosroc) |
| 117 | M&L rendering 10 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 complete all as specified and directed. |
| 118 | M&L for rendering 15 mm thick in CM 1:4 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed. |
| 119 | M&L for preparation of old treated surface of brick/stone work, concrete plastered or unplastered surface and applying two coat of OBD on walls all as specified. |
| 120 | Demolition of reinforced concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed. |
| 121 | M&L for mild steel TMT Bars 10mm dia and over, quality, cut to length, bent to shape required including cranking, bending and binding with mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and directed. |
| 122 | M&L 1:2:4, type B1 (using 20 mm graded stone aggregate) for slab supported on walls beam and column in floor, roofs, landings complete all as specified and directed. |
| 123 | M&L Granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing 15 mm thick screed bedcomplete all as specified |
| 124 | S&F in Repair , vitreous china wash down water closet pan ( pedestal pattern ) white (excluding fixing bolt , flushing cistern and flush pipe) complete all as specified and directed. |
| 125 | S&F vitreous China Wash Basin white, flat back size 550x400 mm including bracket, waste coupling, waste pipe complete all as specified, Make Hindwere/ Parry ware complete all as specified and directed. |
| 126 | S&F aluminium anodisedtubular towel rail 20 mm dia with Brackets complete all as specified and directed. |
| 127 | S&F in repair toilet paper holder of vitreous china fixed to walls with chromium plated (CP) brass screws complete all as specified and directed. |
| 128 | S&F in repair Vitreous China soap tray embedded in the wall complete all as specified and directed. |
| 129 | S&F in repair shelf of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 300gms)complete all as specified and directed. |
| 130 | S&F PVC (SWR) floor trap plain with grating including jointingwith solvent cement 75 mm bore complete all as specified. |
| 131 | S&F for PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or in floors for 75 mm bore pipe complete all as specified and directed. |
| 132 | S&F for PVC (SWR) bend with access door including jointing with solvent cement 75 mm bore complete all as specified. |
| 133 | S&F for PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or in floors for 110 mm bore pipe complete all as specified and directed. |
| 134 | S&F for PVC (SWR) bend with access door including jointing with solvent cement 110 mm bore complete all as specified. |
| 135 | Demolition and breaking up drain pipe 75/100 mm dia (AC, salt glazed, PVC or RCC pipes) set in cement mortar or any description incl excavation of earth, returning filling, removal and making good complete all as specified. |
| 136 | S&F 15mm bore Bib taps, cast copper alloy, with crutch or butterfly handle screwed down, screwed for iron or brass ferrule and fixed but fancy type complete all as specified and directed. |
| 137 | S&F in repairbrass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed. |
| 138 | S&F PVC connection 15 mm size with PTMT nuts of length 600 mm complete all as specified and directed. |
| 139 | S&F 15mm dia angle stop valve of CP any colour high pressure screwed for for iron pipe and fixed complete all as specified and directed. |
| 140 | S&Fin repairs CP health faucet mild steelchromium plated suitable for 15 mm dia pipe with 1.25 mtr long flexible tube and ABS wall hook incl makingconnection and fixed in position with angle valve complete in all respected as specified all and directed |
| 141 | Removal of existing water tank and S&F 1000 ltr capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all all as specified in SSR part -I. |
| 142 | Taking up or down 15mm steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed. |
| 143 | M&L for GI tubing medium grade galvanised with all fittings complete to wall, ceilings or laid on roof top all as specified and directed for 15 mm bore complete all as specified and directed. |
| 144 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed |
| 145 | M&L for compound girders and stanchions, lattice girders, aerial masts, staging for water tanks and the like including caps, bases, splices etc. built up from two or more beam or channel sections or angles with plates, including all lattice bars, stiffeners, gusset plates, etc. complete all as specified and directed. |
| 146 | S&F anodised aluminium Powder Coated (minimum thickness of powder coating 50 micron) frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified |
| 147 | S&F anodised aluminium Powder Coated (minimum thickness of powder coating 50 micron) door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminium snap beading screws etc. complete all as specified |
| 148 | S&F anodised aluminium Powder Coated (minimum thickness of powder coating 50 micron)window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodisedaluminium fittings such as peg stays 150mm long (1 No.). hinges type B-21 100mm long (2 Nos.) suitable handle (1 No.) complete all as specified |
| 149 | S&F aluminium extruded section body door closer hydraulaically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified anddirected |
| 150 | S&F in repairsFloor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified anddirected |
| 151 | S&F9mm thick Prelaminated particle board, interior grade, prelaminated two side with decorative choice lamination & other side balancing white lamination, fixed to aluminium frame work complete all as specified and directed |
| 152 | S&F Sheet glass ordinary quality & glazing 4.8mm thick fixed to aluminium frame work complete all as specified & directed. |
| 153 | S&F 100mm long extruded aluminium alloy handle complete all as specified and directed. |
| 154 | S&F galvanised mild steel wire cloth 0.46 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanised wire staple complete all as specified and directed. |
| 155 | M&L for 12 mm thick plywood ,grade BWR , type BB, fixed with screws to timber frame all as specified and directed |
| 156 | Preparing surfaces of wood and wood based materials, new or old of any description and girth, not otherwise described and treated with one coat creosote oil. complete all as specified and directed |
| 157 | Taking down cement plaster of any description including racking out joints, hacking for key, scrubbing down with water etc. Complete all as specified and directed. |
| 158 | M&L Rendering 10 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 complete all as specified and directed. |
| 159 | All as per item No. 67 above but two coat of oil bound distemper on walls complete all as specified and directed. |
| 160 | S&F PVC (SWR) floor trap plain with grating including jointingwith solvent cement 75 mm bore complete all as specified. |
| 161 | S&F for PVC (SWR) 75 mm bore pipe single socketed in any length with rubber ring joints laid in trenches or in floors complete all as specified and directed. |
| 162 | S&F for PVC (SWR) bend with access door including jointing with solvent cement 75 mm bore complete all as specified. |
| 163 | Removal of existing water tank and S&F 1000 ltr capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all all as specified in SSR part -I. |
| 164 | Taking up or down 15mm steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed. |
| 165 | M&L for15 mm bore GI tubing medium grade galvanised with all fittings complete to wall, ceilings or laid on roof top complete all as specified and directed. |
| 166 | S&F PVC connection 15 mm size with PTMT nuts of length 600 mm complete all as specified and directed. |
| 167 | S&F 15mm dia angle stop valve of CP any colour high pressure screwed for for iron pipe and fixed complete all as specified and directed. |
| 168 | S&Fgun metal globe or gate valve with iron wheel screwed both ends for iron pipe of 15 mm dia complete all as specified and directed. |
| 169 | Taking down carefully copper/aluminum point wiring (light. Fan, socket or power) complete, including fittings such as switches, ceiling roses, pendants, regulators, sockets etc, removing materials to store for keeping in safe custody for reuse at site and making good disturbed surfaces of walls, floors etc. |
| 170 | M&Lfor point wiring for using 1.5Sqm nominal cross section area copper conductor multistandardPVC unsheathed, FRLS cable in and including using pvc casing caping not less than 25mm size and fitings including pvc boxwith suitable size of pvc sheet for top cover(ISI marked) fitted with chromium plated steel screws and washer and 1.5 Sqmmnominal cross section area multistandared copper conductor FRLS green pvc insulated unsheathed earth wire and conecting to earth dolly using color code as per IS including terminal boxes suitable for fixing socket and switches one light point/fan point/Ex fan point controlled by one 5 Amps switch one way all as specified and directed by Engr-in-Charge. . |
| 171 | All as per ser item No 170 here-in-before but one 3 pin 5 Amp switch socket outlet on independent board |
| 172 | All as per ser item No 170 here-in-before but one 3 pin 5 Amp switch socket outlet on same board with accessories |
| 173 | M&Lfor point wiring for using 2.5 Sqm nominal cross section area copper conductor multistandardPVC unsheathed, FRLS cable in and including using pvc casing caping not less than 25mm size and fitings including pvc boxwith suitable size of pvc sheet for top cover(ISI marked) fitted with chromium plated steel screws and washer and 2.5 Sqmmnominal cross section area multistandared copper conductor FRLS green pvc insulated unsheathed earth wire and conecting to earth dolly using color code as per IS including terminal boxes suitable for fixing socket and switches all as specified and directed by Engineer-in- Charge . .PVC flexible copper wire : Havells/Polycab/Finolex/Anchor. |
| 174 | S&F switch piano flush type, single pole, one way 5 Amps 240 volts, complete all as specified and as directed. Make: Anchor/Crabtree(Havels) |
| 175 | S&F switch piano flush type, single pole, 15 Amps 240 volts, complete all as specified and as directed. Make: Anchor/Crabtree(Havels) |
| 176 | S&Fsocket outlet 2 in 1, 3 pin, 5 Amps, flush type complete all as specified and as directed. Make: Anchor/Crabtree(Havels) |
| 177 | S&Fsocket outlet 2 in 1, 3 pin, 5 and 15 Amps, flush type complete all as specified and as directed.Make: Anchor/Crabtree(Havels) |
| 178 | S&F switch socket combination 2 in 1, 3 pin, 5 and 15 Amps flush type, universal complete all as specified and directed. |
| 179 | S&F ceiling rose 3 terminal /PVC/Polycarbonate, isolated body all as specified and directed. Make: Anchor/Crabtree(Havels) |
| 180 | S&F in repairs lamp holder, PVC/ Polycarbonate type with back plate suitable for batten fitting complete all as specified and as directed. Make: Anchor/Crabtree(Havels)/ Polycab |
| 181 | S&F in repairs distribution board, SPN 8 Way, double door complete all as specified and directed. Make: Anchor/Havels/L&T |
| 182 | S&F in repairs MCB, SPN 40 Amps 240 VoltsB curve, complete all as specified and directed. Make : Siemens/ Legrand/ABB/Havells/C&S |
| 183 | S&F in repairs MCB, SPN 63 Amps 240 VoltsB curve, complete all as specified and directed. Make : Siemens/ Legrand/ABB/Havells/C&S |
| 184 | S&F in repairs doors metallic sheet metal enclosure for DB when MCBs to be used SPN 8 ways, 240 V with 200 Amps rated bus bar complete fixed properly on in concealed position and to provide required sizes of flexible conduit at any oper surfaces near DBs of cables/wires complete all as specified and directed. |
| 185 | S&F MCB single pole 6-32A Amps 240 Volts B Curve complete all as specified and directed. Make : Siemens/ Legrand/ABB/Havells/C&S |
| 186 | S&Fz exhaust fan/brisk air fan of size 300 mm sweep, non matallic complete all asspecified and as specified and as directed. Make:Philips/Crompton/Bajaj/Wipro/Havels |
| 187 | S&Fz exhaust fan/brisk air fan of size 200 mm sweep, non matallic complete all asspecified and as specified and directed. Make:Philips/Crompton/Bajaj/Wipro/Havels |
| 188 | S&F fan regulator 230 Volts |
| 189 | S&F electric water heater, storage verticaltype outer body Engineering Thermoplastic plastic with puf injectedtype insulation , Steel tank with glass lined coatinginner tank and heating element (copper tube) upto 2 KW capacity 25 litre, 230 volts ACsingle phaseBEE 5 Star rated complete with all accessories such as FR Grade 3 core PVC Cord ,multifunctional safety valve, thermostate, connection piece etc. complete all as specified.Note: Internal water supply upto serviceconnection will be included in quoted rate . |
| 190 | S&F LED Lamp 10 W all as specified and directed. Make : Philips/Crompton/Bajaj/Wipro/Havels |
| 191 | S&F LED lights fitting 1x 20W, 220V, ACLED tube light connecting up withflexible copper conductor cable of suitable size from ceiling rose all as specified and directed. Make : Philips/Crompton/Bajaj/Wipro/Havels |
| 192 | M&L in repairs for earthing complete with galvanizedsteel earth plate electrode 600mm x 600mm x 6 mm thick buried directly in ground (earth pit not less than 2.25 m deep below normal ground level) with top edge of the plate not less than 1.5 m below normal ground level connected to galvanized earth wire of 4 mm dia (up to 7.5 m in length from earth plate ) by means of bolts and nuts checknuts and washers of galvanized iron or steel all as specified and shown in electrical plate no.3 of SSR part I including necessary excavation and earth work in any type of soil PCC 1:3:6 type C1 chamber with RCC 1:2:4 type B1 40 mm thick cover with MS rod 8mm dia at 150mm c/c in both ways as reinforcement, watering funnel, 20 mm dia light grade for protection of earth electrode, 20 mm dia GI pipe light grade for watering complete all as specified and as directed by Engineer in charge and tested on completion.Note : The rate is ilnclusive of necessary earth work, RFR and removal etc |
| 193 | Supply ,Laying ,connecting/ Jointing,charging, testing and commissioning LT cable electric, XLPE insulated, armoured, PVC sheathed, heavy duty, electric cable 1100 Volts grade withstranded aluminumconductor conforming to IS :7098, laid in trenches/ducts/fixed to wall /roofs/ poles all as specified of size2 Core 10 sq mm including taking outold unservicable cable from any space complete all as specified and directed. |
| 194 | Supply ,Laying ,connecting/ Jointing,charging, testing and commissioning LT cable electric, XLPE insulated, armoured, PVC sheathed, heavy duty, electric cable 1100 Volts grade withstranded aluminumconductor conforming to IS :7098, laid in trenches/ducts/fixed to wall /roofs/ poles all as specified of size2 Core 25 sq mm including taking outold unservicable cable from any space complete all as specified and directed. |
| 195 | Supply ,Laying ,connecting/ Jointing,charging, testing and commissioning LT cable electric, XLPE insulated, armoured, PVC sheathed, heavy duty, electric cable 1100 Volts grade withstranded aluminumconductor conforming to IS :7098, laid in trenches/ducts/fixed to wall /roofs/ poles all as specified of size3.5 Core 50 sq mm including taking outold unservicable cable from any space complete all as specfied and directed. |
| 196 | Supply ,Laying ,connecting/ Jointing,charging, testing and commissioning LT cable electric, XLPE insulated, armoured, PVC sheathed, heavy duty, electric cable 1100 Volts grade withstranded aluminumconductor conforming to IS :7098, laid in trenches/ducts/fixed to wall /roofs/ poles all as specified of size4 Core 25 sq mm including taking outold unservicable cable from any space complete all as specified and directed. |
| 197 | Excavation in trenches n exc 1.5 m wide & n exc 1.5 mtr deep in depth for foundation, etc or for shafts, wells, cesspits, manholes, pier holesetc not exc 10 sqm on plan and n exc 1.5 mtr in depth and getting out of soft/lose soil for taking out pipe & laying of pipe & getting outfor diverting of CI pipeline complete all as specified and directed. |
| 198 | Removal of excavated soil to a distance not exc 50 m and depositing where directed at a level not exc 1.5 mtr above the starting point complete all as directed. |
| 199 | Returning, filling in, including spreading, leveling, watering & well ramming in layers n. exc 25 cmcomplete all as specified and directed. |
| 200 | M&L for sand cushioning to under ground cables with a layer of sand 8 cm before laying the cable and 15 cm after laying the cable complete all as specified |
| 201 | M&L for sub class \"B\" bricks laid dry width wise across the line of cable in treanchs as cable protection complete all as specified. |
| 202 | S&F GI Tubing light grade 40mm dia with all fitting; laid in trenches all as specified and directed |
| 203 | S&F LED lights fitting 1x 20 W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with twocore flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed. |
| 204 | S&F LED inverter Bulb 12 Watt. |
| 205 | S&F ledluminaire comprising of high brightness LEDs 9/10W LED, IP-65/66 complete all as specified and directed.Make : Havells or equivalent in Bajaj/PHILIPS/CG |
| 206 | S&F MCB, DB,TPN, double door, IP-43, 8 waywith 200 A rated bus bar having earth terminal,including MCCB 250 Amps as incommer and and mcb sp as out going for DB SPN complete in all respect Concealed in wall including making electrical incoming and outgoing connection with legs/thimbles all as speacified and directed. Make : Siemens/ Legrand/ABB/Havells/C&S |
| 207 | M&L sub main wiring with two run single core 6 Sqmm FRLS copper conductor cable PVC insulated, unsheathed, 1100 V including 20 mm diaPVC conduit/casing caping, medium grade ISI marked with all accessories such as Tees, elbows, junction boxes etc, as required fixed on wall alongwith one run of 6 Sqmm single core PVC FRLS insulated unsheathed copper conductor cable as continuous earth wire and connecting to existing main switch board / distribution board and testing on completion etc complete all as directed.Note: Two runs of 6 sqmm and one run of 6 sqmm cable and one run of casing capping shall be measured as one RM. Make : Anchor/ Havells/ Finolex/ Polycab |
| 208 | S&F exhaust fancomplete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 200/250/300mm |
| 209 | S&F stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc. as reqd |
| 210 | S&F Building security light s LED 35 WATT |
| 211 | S&F in repairs MCB, SPN 63 Amps 240 VoltsC curve, complete all as specified and as directed. Make : Anchor/ Havells/ Finolex/ Polycab |
| 212 | S&F MCB SP 6 to 32 Amps, 240 Volts, C Curve complete all as specified and directed. Make : Anchor/ Havells/ Finolex/ Polycab |
| 213 | S&F exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250mm complete all as specified and directed. |
| 214 | S&F in repairs Distribution Board, SPN 12 Way, Double door complete all as specified and directed |
| 215 | S&F exhaust fan/brisk air fan of size 450 mm sweep,matallic bodycomplete all as specified anddirected. |
| 216 | S & F ledluminaireReccess mounted / surface mounted comprising of high brightness LEDs 15 W LED, complete all as specified and directed.Make : Havells or equivalent in Bajaj |
| 217 | M&L for sub main wiring with 2 run single core multistranded copper conductor cable, of size 4 Sqmm, PVC insulated, unsheathed, fire retardant, low smoke (FRLS) drawn through and including PVC capping & casing not less than 25 mm wide with all necessary fitting and including one run single core multistranded copper conductor cable, of size 4.0 Sqmm, PVC insulated, unsheathed, fire retardant low smoke as earth wire, fixed on wall / ceiling complete all as specified and directed.Note :- 2 Runs of main cable and one run earth wire with capping & casing will be measured as one RM for payment. |
| 218 | S&F GI Hood 5 Ft,Ducting 4 Mtr ,fan price given including size STD all as per specified and directed. |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2026 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
