Tender For Special Repair To Bldg No P-269 And P-271 In The Aor Of Age B/R-I Under Ge 969 Ews(Job No: (I) W/Spl Repair (Bldg)/35/19 Inf Div Camp/2025-26 & (Ii) W/Spl Repair (Bldg)/36/19 Inf Div Camp/2025-26); 1 Dismantling of plain or corrugated steel sheeting , any gauge and thickness in roof covering including Nainital or similar pattern roof covering complete all as specified. 2 M&L Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550MPa as, in roofs, walls etc complete all as specified 3 M&L Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550MPa as, in roofs, walls etc. complete all as specified 4 Dismantling wall and ceiling boards (fibre, pulp, insulation, etc) or insulation boards/slabs/ blankets,any thickness, cover fillets etccomplete all as specified. 5 M&L 4 mm thick veneered decorative, plywoodgrade 1 (BWR resin) with decorative face veneers on one faces , fixed with nails to timber frame work on ceiling. all as specified and directed. 6 M&L 4 mm thick veneered decorative, plywoodgrade 1 (BWR resin) with decorative face veneers on one faces , fixed with nails to timber frame work on wall. all as specified and directed. 7 Dismantling of timber scantling 40 Sqcmand over in section in any position in unframed work. all as specified and directed. 8 M&L for second class soft wood (Kail) clean swan timber fixed in scantling. all as specified and directed. 9 Dismantling of timber fillets rails, posts rafter purlins etc under 40 Sqcm in section in any position in framed workall as specified and as directed 10 S&F second classsoftwoodplain fillets square, rectangular in section exc 13 Sqcm & not exc 25 Sqcm complete all as specified and directed. 11 S&F second classsoftwoodplain fillets square, rectangular in section exc6 Sqcm and not exc 13 Sqcm complete all as specified and directed. 12 Demolition of cement concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified. 13 Dismantling of floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified. 14 M&L non-skid ceramic tiles7 to 8mm thick area of each tiles exc 0.18m and n.exc 0.38 Sqm in floor etc,Incl screed bed 15 mm thick in CM 1:6 complete all as specified and directed 15 S&F glazed ceramic coloured tiles in vernicles surfaces of size 600x300x7/9 mm thick set and jointed in neat cement slurry and pointedwhite or coloured cement to match tile surface over and including 10 mm thick plaster in cement and sandmortar 1:4, complete all as specified. 16 M&L for 25mm thick PCC 1:2:4 type B-1 (using 20 mm graded stone aggregate) as in floors finished even and fair. 17 M&L forKota stone slabs, 20mm to 25mm thick, machine cut as in flooringof size not less than 0.25 Square metre each, set and jointed in cement slurry and pointed in cement mixed with pigment to match the shade of slab laid over & including screed bed of 15 mm thick in cement mortar 1:4including rubbing, cutting and polishing (mirror type), complete all as specified. 18 M&L 75mm thick PCC 1:3:6 type C-2 (using 40mm graded stone aggregate) as in plinth protection and similar works including finishing the surface of concrete topping even & fair, without using extra cement ,complete all as specified. 19 Taking down chowkhats or frame with shutter (without taking out shutter from the frame) not exceeding 1.50 sqm each and removal from site all as specified and directed 20 Taking down chowkhats or frame exc 1.5 Sqm but n.exc 4 Sqm each with shutters(W/out taking off shutters from the frames). complete all as specified 21 S&F 2nd Class Soft wood plain, solid, straight chowkhats and frames, wrought, framed rebated on the solid rounded or chamfered put together with glue pinned at joints all as specified and as directed 22 S&F 2nd class Hard wood 35mm thick factory made panelled shutters with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and style as per IS-1003 (Pt-I) kiln seasoned and chemically pressure treated. complete all as specified 23 S/F PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplied and fitted in openings as per specification and drawing sown in SSR Part II, complete all as specified. 24 S&F factory made solid PVC moulded door shutter28 to 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heatmoulded plain colour PVC C channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side & and as gap insert for top rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to thethe stiles & rails with suitable PVC sheet beading, and joined together with solvent cementcomplete all as shownin drawing of relevant item in MES, schedule Part II, 2010 as specified. 25 S&F aluminium alloypowder coated aluminium sliding windows three track with movable shutters (sliding on minimum two PVC roller of best quality, for each shutter on three tracks with stainless steel mosquito proofing and glazing shutter and incl 5.50mm thick glass & stainless steel wire mesh fixed with neoprene rubber gasket with aluminium beading clips, frame made with aluminium section as appended below :-(a) Window Frame- 75mmx35mmx1.48mm thick(b) Top/Bottom rail and style/rail of shutter - 38mmx19mmx1.48mm thick and over(c) Aluminium beading /clips - 0.7mm thick(d) Stainless Steel wire cloth 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed in aluminium window or alongwith F/Y section fixed with aluminium fire staples complete.(e)Aluminium fittings such aluminium suitable handle with auto interlocking closing.(f) Making good of wall surfaces to match with existing surfaces complete all as specified and directed. 26 MS cold rolled butt hinges medium weight 100 mm long complete all as specified. 27 S&F 300mm long Aluminium alloy, anodised, sliding door bolts with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast- aluminium alloy all as specified and as directed. 28 S&F 300 mm size mild steel ordinary rat rail rod pattern springs including roller and roller plate complete all as specified and directed. 29 S&F 200mm long Anodised Aluminium tower bolt all as specified 30 S&F Sheet glass ordinary quality & glazing with oil putty in square n-exc. 0.5 sqm in each pane 3mm thick complete all as specified & directed. 31 M/L for applying two coats of synthetic enamel paint over a coat of pinkprimer including preparation of new wooden or wood based surfaces over 10cm width or girthetc all as specified and directed. 32 M&L for Waterproofing and repair of leakage/seepage treatment to external wall complete all as specified and directed :- (a) Step 1 - Taking down cement plaster of any descriptionby manual and mechanical means, plumbing treatment of pipesetc including racking out joints hacking for key, scrubbing down with water etc. and (b) Step 2 - applying waterproofing treatment to slab/ wall area with assign paints smart careDamp Block 2k @1.5kg/sqm, Damp block 2k is atwo component elastomeric cementations coating conforming to ASTM D 412 & ASTM D 4548.5 standards including all necessary surface preparation, etc. complete as per manufacturers specifications and application methodology. The same coating shall be applied in two coats achieving a total thickness of 1.0mm. The coating shall have a 100% elongation and crack bridging upto 1.2mm as per ASTM D4548.5. (c) Step 3- Over and above Asian Paints Smart care Damp block 2k applying plaster minimum 12mm thick. SC REPAIR MORTAR.Makes ( BASF, Asian Paints, Sika, Fosroc) 33 Demolition of brick work, PCC block masonry, stone masonry or boulder masonry built in cement mortar complete all as specified and directed. 34 M&L for brick work with sub class B bricks (Old size) straight or curved on plan exceeding 6 mtr mean radius built in CM 1:6 complete all as specified 35 M&L Rendering 10 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 complete all as specified and directed. 36 M&L for rendering 15 mm thick in CM 1:4 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed. 37 M&L for preparation of new surfaces of walls and applying two coats of Oil bound distemper over a coat of priming on plastered and other surfaces with alkali resistant priming paintcomplete all as specified as directed by Engr-in-Charge. 38 M&L for complete removal of existing treatment on old wall surfaces & finishing walls with acrylic smooth exterior paint of required shade Now work (two or more coat applied @ 1.67 Itr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) new surfaces or old decorated surfaces complete all as specified and directed. 39 M&L for preparation of old treated surface of brick/stone work, concrete plastered or unplastered surface and applying two coat of OBD on walls all as specified. 40 Demolition of reinforced concrete of any description and in any position not otherwise specifically provided complete all as specified. 41 M&L for mild steel TMT Bars 10mm dia and over, quality, cut to length, bent to shape required including cranking, bending and binding with mild steel wire (annealed) not less than 0.9 mm dia. 42 M&L1:2:4, type B1 (using 20 mm graded stone aggregate) for slab supported on walls beam and column in floor, roofs, landings, all as specified . 43 M&L granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing 15 mm thick screed bedcomplete all as specified 44 M&L in repair , vitreous china wash down water closet pan ( pedestal pattern) white (excluding fixing bolt , flushing cistern and flush pipe) complete all as specified and directed. 45 S&F PVC valveless,10 liters symphonic action cistern, low level, white, with inlet, ball valve, float and including brackets and connection to pipes complete all as specified and directed. 46 S&F vitreous china wash basin white, flat back size 550x400 mm including bracket, waste coupling, waste pipe complete all as specified. 47 S&F 600 x 450 mm bevelled edge mirror of selected quality glass, mounted on 6 mm thick AC building board or commercial ply wood and fixed to wooden plugs with chromium plated brass & screws and cup washers complete all as specified and directed. 48 S&F aluminium anodisedtubular towel rail 20 mm dia with brackets complete all as specified and directed. 49 S&F in repair toilet paper holder of vitreous china fixed to walls with chromium plated (CP) brass screws complete all as specified abd directed. 50 S&F in repair Vitreous China soap tray embedded in the wall complete all as specified and directed 51 S&F in repair shelf of PTMT fixed with and including chromium plated brass screws and wooden/plastic cleats (Minimum weight 300gms)all as specified and directed. 52 S&F PVC (SWR) floor trap plain with grating including jointingwith solvent cement 75 mm bore complete all as specified. 53 S&F for PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or in floors for 75 mm bore pipe complete all as specified and directed. 54 S&F for PVC (SWR) bend with access door including jointing with solvent cement 75 mm bore complete all as specified. 55 S&F for PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or in floors for 110 mm bore pipe complete all as specified and directed. 56 S&F for PVC (SWR) bend with access door including jointing with solvent cement 110 mm bore complete all as specified. 57 Demolition and breaking up drain pipe 75/100 mm dia (AC, salt glazed, PVC or RCC pipes ) set in cement mortar or any description including excavation of earth, returning filling, removal and making good complete all as specified. 58 M&L for PCC 1:4:8 type D1(using 40 mm grade stone aggregate) as in bed to drain pipes including packing under and haunching against the side of pipes after these are laid tested for 150 mm bore of pipes complete all as directed. 59 S&F 15mm bore Bib taps, cast copper alloy, with crutch or butterfly handle screwed down, screwed for iron or brass ferrule and fixed but fancy type complete all as specified and directed. 60 S&F in repairbrass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed. 61 S&F PVC connection 15 mm size with PTMT nuts of length 600 mm complete all as specified and directed. 62 S&F 15mm dia angle stop valve of CP any colour high pressure screwed for for iron pipe and fixed complete all as specified and directed. 63 S&Fin repairs CP health faucet mild steelchromium plated suitable for 15 mm dia pipe with 1.25 mtr long flexible tube and ABS wall hook incl makingconnection and fixed in position with angle valve complete all as specified and directed. 64 Removal of existing water tank and S&F 1000 ltr capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all all as specified in SSR part -I complete all as specified and directed. 65 Taking up or down 15mm steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed. 66 M&L for GI tubing medium grade galvanised with all fittings complete to wall, ceilings or laid on roof top all as specified and directed for 15 mm bore complete all as specified and directed. 67 S&F mild steel framed work such as grills, frame work of water tanks FE 290 Gde E-165 complete all as specified and directed. 68 S&F10 user LLDPE septic tank conventional to carry sewage and sludge water , excavation in any type of soil ,PCC 1:4:8 below foundation , vent shaft connection etc complete all as specified and directed 69 Construction of Soakage wells excavation, in any type of soil, foundation in PCC 1:3:6, walls of honey combed masonry with top ring of M-25 concrete including intercepting chamber and screen chamber made of Brick masonry in CM, RCC cover slab in M25/ SFRC cover, interconnecting pipes of RCC/DWC complete filled with brick bats of size 2.4m dia and 3m depth complete all as specified and directed. 70 Taking down carefully copper/aluminium point wiring (light. Fan, socket or power) complete, including fittings such as switches, ceiling roses, pendants, regulators, sockets etc, removing materials to store for keeping in safe custody for reuse at site and making good disturbed surfaces of walls, floors etc. 71 M&Lfor point wiring for using 1.5 sqmm nominal cross section area copper conductor multistandard PVC unsheathed, FRLS cable in and including using PVC casing capping not less than 25mm size and fittings including PVC box with suitable size of pvc sheet for top cover (ISI marked) fitted with chromium plated steel screws and washer and 1.5 Sqmm nominal cross section area multistandared copper conductors FRLS green PVC insulated unsheathed earth wire and connecting to earth dolly using colour code as per IS including terminal boxes suitable for fixing socket and switches one light point/fan point/Ex fan point controlled by one 5 Amps switch one way all as specified as directed by engineer in chargeMake : Anchor/ Havells/ Finolex/ Polycab 72 All as per ser item No 71 here-in-before but one 3 pin 5 Amp switch socket outlet on same board with accessories 73 All as per ser item No 71 here-in-before but one 3 pin 5 Amp switch socket outlet on independent board 74 S&F switch piano Flush type, single pole, one way 5 amp 240 volts, complete all as specified and as directed. 75 S&FSocket outlet 2 in 1, 3 pin, 5 Amps, flush type complete all as specified and as directed. 76 M&Lfor point wiring for using 2.5 sqmm nominal cross section area copper conductor multistandard PVC unsheathed, FRLS cable in and including using PVC casing capping not less than 25mm size and fittings including PVC box with suitable size of pvc sheet for top cover (ISI marked) fitted with chromium plated steel screws and washer and 2.5 Sqmm nominal cross section area multistandared copper conductors FRLS green PVC insulated unsheathed earth wire and connecting to earth dolly using colour code as per IS including terminal boxes suitable for fixing socket and switches complete all as specified and directed by Engineer-in-Charge. 77 S&F Switch socket combination 2 in 1, 3 pin,5 and 15 Amp flush type,universsal complete all as specified and directed. 78 S&F LED lights fitting 1x 20 W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with twocore flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed. 79 S&F in repairs Lamp Holder, PVC/ Polycarbonate type with back plate suitable for batten fitting complete all as specified and directed. 80 S&F ceiling rose, 3 Terminal /PVC/ polycarbonate, isolated body complete all as specified. 81 S&F in repairs Double door metallic sheet metal enclosure for DB when MCBs to be used SPN 8 ways, 240 V with 200Amps rated bus bar complete fixed properly on in concealed position and to provide required sizes of flexible conduit at any open surfaces near DBs of cables/wires all as directed. 82 S&F in repairs MCB, SPN 63 Amps 240 VoltsC curve, complete all as specified and directed. 83 S&F MCB SP 6 to 32 Amps, 240 Volts, C Curve complete all as specified and directed. 84 S&F LED inverter Bulb 12 Watt. 85 S&F ledluminaire comprising of high brightness LEDs 9/10W LED, IP-65/66 complete all as specified and as directed.Make : Havells or equivalent in Bajaj/PHILIPS/CG 86 S&F MCB, DB,TPN, double door, IP-43, 8 waywith 200 A rated bus bar having earth terminal, including MCCB 250 Amps as incomer and and mcb sp as out going for DB SPN complete in all respect Concealed in wall including making electrical incoming and outgoing connection with legs/thimbles all as specified and directed. Make : Siemens/ Legrand/ABB/Havells/C&S 87 M&L sub main wiring with two run single core 6 Sqmm FRLS copper conductor cable PVC insulated, unsheathed, 1100 V including 20 mm diaPVC conduit/casing capping, medium grade ISI marked with all accessories such as Tees, elbows, junction boxes etc, as required fixed on wall alongwith one run of 6 Sqmm single core PVC FRLS insulated unsheathed copper conductor cable as continuous earth wire and connecting to existing main switch board / distribution board and testing on completion etc complete all as directed.Note: Two runs of 6 sqmm and one run of 6 sqmm cable and one run of casing capping shall be measured as one RM Make : Anchor/ Havells/ Finolex/ Polycab 88 M&L in repairs for Earthing complete with galvanizedsteel earth plate electrode 600mm x 600mm x 6 mm thick buried directly in ground (earth pit not less than 2.25 m deep below normal ground level) with top edge of the plate not less than 1.5 m below normal ground level connected to galvanized earth wire of 4 mm dia (up to 7.5 m in length from earth plate ) by means of bolts and nuts checknuts and washers of galvanized iron or steel all as specified and shown in electrical plate no.3 of SSR part I including necessary excavation and earth work in any type of soil PCC 1:3:6 type C1 chamber with RCC 1:2:4 type B1 40 mm thick cover with MS rod 8mm dia at 150mm c/c in both ways as reinforcement, watering funnel, 20 mm dia light grade for protection of earth electrode, 20 mm dia GI pipe light grade for watering complete all as specified and as directed by Engineer in charge and tested on completion. Note : The rate is inclusive of necessary earth work as Excavation, RF and removal etc. 89 S&F exhaust fancomplete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 200/250/300mm 90 S&F stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc. as reqd 91 S&F 35 W LED new generation energy saving & environmental friendly long life versatile pressure die-cast aluminium IP66 roadway luminaire with high power LED as light source and electronic driver suitable for fixing on building complete all as specified and directed. 92 S&F building security lights LED 30 W 93 Supply ,Laying ,connecting/ Jointing, charging, testing and commissioning LT cable electric, XLPE insulated, armoured, PVC sheathed, heavy duty, electric cable 1100 Volt grade withstranded aluminiumconductor conforming to IS :7098, laid in trenches/ducts/fixed to wall /roofs/ poles all as specified of size3.5 Core 50 sq mm . including taking outold unserviceable cable from any space complete all as specified and directed. 94 Excavation in trenches n exc 1.5 m wide & n exc 1.5 mtr deep in depth for foundation, etc or for shafts, wells, cesspits, manholes, pier holesetc not exc 10 sqm on plan and n exc 1.5 mtr in depth and getting out of soft/lose soil for taking out pipe & laying of pipe & getting outfor diverting of CI pipeline complete all as specified and directed. 95 Removal of excavated soil to a distance not exc 50 m and depositing where directed at a level not exc 1.5 mtr above the starting point complete all as directed. 96 Returning, filling in, including spreading, levelling, watering & well ramming in layers n. exc 25 cm complete all as specified and directed. 97 M&L for sand cushioning to under ground cables with a layer of sand 8 cm before laying the cable and 15 cm after laying the cable complete all as specified 98 M&L for Sub class B bricks laid dry width wise across the line of cable in treanchs as cable protection complete all as specified. 99 S&F GI Tubing light grade 40mm dia with all fitting; laid in trenches all as specified and directed
