Tender For Beautification Work Of The Newly Constructed Meeting Hall - Laying and Jointing PVC Pipe. Heading 2 Providing and laying Vitrified tiles in differentsizes (thickness to be specified by manufacturer), with water absorption less than 0.08% and conforming to 15 15622, of spproved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (Icement: 3 coarse sand), jointing with grey cement slurry 3.3 kg/som including grouting the joint with white cement & matching pigments etc. complete Size of Tile 600x600 mm 3 9.127.2-Providing & Fixing decorative high pressure laminated sheet of plain/wood grain in gloss/matt/suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to 15: 2046 Type S. Including cost of adhesive of approved quality. 35 mm thick including ISi marked Stainless Steel butt hinges with necessary screws 4 Providing and fixing at all height wall panelling with 9mm thickness phenol bonded Bamboo Mat board conforming to IS 13958-1994 including providing and fixing to frame work made of 50mm x 50mm hardwood plugs including cutting brick work and foxing in cement mortar and making good the wall etc and also providing and fixing wooden moulded comer beading of triangular shape to the junction of panelling etc with iron screws all complete as per direction of Engineer-in-Charge As per DSR 26.6E 1 5 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface 6 Wall painting with premium ecrylic emulsion paint of interior grade, having VOC (Volatile Organic Compund) content less than 50 grams/ litre of approved brand & manufacture, including applying addolional coats whereever required to achieve even shade & colour Two coats, with water thinnable cement primer on wall surface having VOC content less than 50 grams/litre 7 Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied 0.90 tr/10 sqm over an under coal of primer appiled 0.80 tr/10 sqm of approved brand and manufacture 8 Painting wood work with Deluxe Mulli Surface Paint of required shade. Two or more cost applled 090 Br/10 sqm over an under coat of primer appiled 0075 itr/10 sqm of approved brand and manufacture (Wood Work) 9 Providing and faxing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and laxture laid over 20 mm thick base cement mortar 1:4 (1 cement: 4 coarse sand), Joints Ireated with white cement, moxed with matching pigment; epoxy touch ups, including rubbing, curing, mouiding and polishing to edgesto give high gloss finish etc. 10 Providing and foxing glazed shutters for doors, windows and clerestory windows using 4 mm thick float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws. (a) 35mm thick Second class teak wood. 11 Providing and fixing fly and Mosquito proof stainless steel grade 304 wire mesh gaugewith 0.5 mm dla wire and 1.4 mm wire aperture 12 wine at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of celling feed to wall/partition with the help of raw plugs at 450 mm centre, with 25mm lang dry wall screws 230 mm interval, including fixing of gypsum board to celling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound Jointing tapes, finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and Iwo coats of primer suitable for board, all as per manufacturers specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete sa per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with 13 supply and fixing of 100 mm dia pvc pipe 14 Casement cum fixed panel window having both end single casement panel, middle fixed paneis and at top completely fixed ventilator with 5.5 friction hinges (400 x 10 x 10) made of (big series) frame 60 x 58 mm, sash 60 x 72 mm & T mullion 60 x 72 mm all having wall thickness of 2.3±0.2 mm and single glazing bead/double glazing bead of appropriate dimension (Ares of window above 3.00 sqm upto 5.00 sqm) 15 Providing & flaing stainless steel sliding door bolts 151 marked anodised (anodic coating not less than grade AC 10 es per 18 1068) transparent or dyed to required colour or shade with nuts and screws atc complete (a)300mm x 16mm 16 PiFbing stainless steel tower bolls ISt marked anodised (anodic coating not less than grade AC 10 as/15 1808) transparent or dyed to required colour or shade with necessary screws etc 250 mm x 10mm 17 Providing & fixing bright/ matt finished stainless steel handles of approved quality & make with screws and 125mm long. Si marked 18 Providing and foing cctv camera with sound system with projectoer with Led TV including all T&P 19 Supply of meeting hall round Table & Chair including Chairman room sofa with with sound system including 20 Electrial fitting
