Tender For Special Repair To Bldg No. T-86 (Incl Attach Toilet Block) & Repair /Replacement Of Drainage/Sewage Line At Bldg No T-184 To T-186, P-494 (B), P-495 (C), T-511, T-512, T-529 Tp T-533, T-580, T-581 & T-629 (B) Of 4 Tech Trg Bn 3 Eme Centre & Repair/Replacement Of Sewage Line At Jcos Accn From Bldg No. P-152/3 To P-153/3 At Eme Centre; 1 Note :(i) Please refer Sch A/ BOQ Notes before quoting the tender for all phases/ items mentioned below.(ii) Amount of Schedule of credit shall be deducted offline 2 Taking down chowkhats or frame nexc 1.5 sqm each with shutters (without taking off shutters from the frame) including accessories complete all as specified and directed 3 Taking down chowkhats or frame exc 1.5 sqm but n exc 4.00 sqm each with shutters (without taking off shutters from the frame) including accessories complete all as specified and directed. 4 S&F powder coated aluminium fabricated work as in shutters/frames for doors, windows/ventilators, partition as per manufacturer instruction complete including necessary jointing cleats, anodised aluminium snap beading, rubber neoprane including taking down damage portion of damage doors, windows or taking down complete door/window complete all as specified and directed.Note:-Rates are including for necessary new fittings fordoor/window i.e handle, tower bolt, butt hinges, filling of gap between wall and window by silicon gel etc complete 5 S&F for providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of size 30 mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calciumcarbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face)proof and & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer In- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be included in the item ) 6 S&F factory made 100% solid PVC flush shutter 28 mm thick, made from Co- Extruded three layer rigidPVC foam sheet (single extruded) with density not less that 600 kg/Cum, outer layer (0.8-1 mm) thick should be of rigid pvc with density of not less than 1400 kg/Cum manufactured by an ISO 9001-2015 certified company. Door should be water proof, termite proof , fire retardant & having good screw holding capacity complete all as specified and directed. 7 S&F for factory made 30mm thick 100% Solid WPC ( Wood polymer Composite ) Laminated WiremeshDoor Shutter of required size comprising of virgin PVC resin of K Value 57-60 ( Suspension Grade ), Calcium Carbonate and natural fibers ( Wood Powders/ rice husk/ wheat husk ) and Non toxic additives, made from Extrusion process WPC foam sheet Single Extruded ( Inner ) with having minimum density not less than 650 kg/cbm , having good screw holding capacity ( Screw Withdrawal strength of 2000 N ( Face ) & 1100 N ( Edge ), Minimum Compissive of 50 N/mm2 , Modulus of elasticity 850N/mm2and resistance of spread of flame of Class A category with Property of being Termite/ Borer Free.Water/ Moisture Proof and Fire Retardant. WPC to be Laminated with PVC foil of minimum 14 microns thick of approved design pasted on both faces of shutter. For fixing Mosquito mesh and XTN aluminium mesh combinly panel area of door except stiles and rails to be panelled with mesh with self tapping round headed scresws at required distance, scres and edges covered with feathered pvc edge beading all around of mesh and fixing stainless Steel butt hinges of required size with necessary full body threaded star headed counter sunk SS Screws. All as per direction of Engineer -In-Charge, Material test certificate and authentication should be compulsory provided by the manufacturing company : For Internal/Balcony/Main Doors.(Make :- M/s Rajshri plastiwood/Jain wood Industries/ M/s Goel Brothers,/M/s Goyal Industries/M/s Pioneer Timber Chandigarh) 8 S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65 x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardantand fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made as per manufacturer instruction complete all as specified and directed. 9 S&F factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardantand fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made as per manufacturer instruction complete all as specified and directed. 10 M&L for cement concrete type B-0, 1:2:4 (using 12.5 mm graded stone aggregate) as in coping, bed blocks, lintels, cills, steps, seismic and other similer bands, kerbs and like etc complete all as specified and as directed. 11 M&L for providing, cement concrete 1:2:4 type B1 (Using 20 mm graded stone aggregate) mixed with WPC as in roof kerbs or mud stops, rounded or chamfered on edges, joints of wall and roof sheets and the like and in similar works complete all as specified and directed. 12 M&L for frame work such as grills , gratings, railings, frame work of water tanks and the like conforming to Fe-290, Gde E-165 complete all as specified and directed. 13 S&F for stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperure 1.40 mm and fixedwith stainless steel wire staples fixed complete all as specified and directed.. 14 S&F for 100 mm stainless steel butt hinges, extruded ISI marked, all as specified and directed. 15 S&F for 150 mm stainless steel handles, ISI marked, cast type, complete all as specified and directed 16 S&F for 150 mm stainless steel tower bolts,ISI marked, extruded section and fixed complete all as specified and directed. 17 S&F for stainless steel, ISI marked, 300 mm long sliding door bolts with hasp stapple (bolt type) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast sections or cast aluminium alloy complete all as specified and as directed 18 Dismantling of stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar complete all as specified and directed. 19 M&L for granite (any type) 18 to 20 mm thick (table rubbed and polished) in steps, jambs, pillars, window & door cills, cooking platforms, counter, shelves and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including making the edges bull nosed and including over 15mm thick screed bed in CM 1:4complete all as specified and directed. 20 M&L for size 1200mm x 600 mm (4 x 2 ), machine cut kota stone slab flooring 20-25 mm thick over cement screed base in CM 1:4laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including making the edges bull nosed and rubbing and mirror polishing complete all as specified and directed. 21 M&L for machine cut kota stone slab 20-25 mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including making the edges bullnosed and rubbing and mirror polishing complete all as specified and directed. 22 M&L for non skid ceramic coloured tiles 7mm to 8 mmthick (square /rectangular) joint free area of each tile exceeding 0.11 Sqm, but not exceeding 0.18 Sqm, in floors over and including 15mm thick screed in CM 1:6 etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shades of tiles complete all as specified & directed. 23 Demolition of cement concrete reinforced (reinforcement cut as required to facilitate demolition) in any description and in any position not other wise specifically provided for complete all as specified and directed. 24 M&L for reinforced cement concrete (nominal mix), type B1 1:2:4 (using 20mm graded stone aggregate) on as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves, chajjas and the like complete all as specified and directed. 25 Use and waste of formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work not exceeding 200mm thick (Horizontal or sloping) complete all as specified and directed. 26 Demolition of cement concrete in ground floor, (unreinforced) paving n exc 15 cm thick(below or above GL) including tiling if any complete all as specified and directed. 27 M&L for 75 mm thick PCC 1:3:6 ,type C2 , (using 40 mm graded stoneaggregate) in plinth protection, aprons, hard standing, path and like including finishing the surfaces even and smooth without using extra cement incl making the grooves filling with bitumen mastic complete all as specified and directed. 28 M&L for moorum filling brought from outside MD land with any lead, including spreading, levelling, watering & well ramming, in layers not exc 15 Cm each complete all as specified and directed. 29 M&L for hardcore of broken stone or boulders of gauge n exc 63 mm deposited spread and levelled in layers n exc 15 cm thick watered and rammed to a true surface complete all as specified and directed. 30 M&L forcement concrete 1:4:8 type D-2 (using 40 mm graded stone aggregate) as infoundation , filling, sub base and mass concrete complete all as specified and directed. 31 Dismantling floor, hearth or wall tiling including cement mortar bedding(but not backing), removing serviceable tiles and rubbish off the premises complete all as specified and directed. 32 M&L for coloured glazed tiles in walls /vertical surface 350 x 250 x 7 to 8mm/ 450X300X 7 to 8mm thick set and jointed over and including 10 mm thick rendering, even and rough in CM 1:4 for backing of tiles, jointed in neat cement slurry and pointed in white or colour cement to match the shade of tiles complete all as specified and directed. 33 Demolition of brick work, built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed. 34 M&L for brick work with sub class ‘B’ (modular size bricks) straight or curved on plan exc 6 m mean radius, built in CM 1:6 all as specified and directed. 35 M&L for brick work with sub class ‘B’ (modular size bricks) straight or curved on plan anyradius in half brick thick walls, built in CM 1:4 all as specified and directed. 36 Taking down cement plaster on brick or concrete surfaces, including racking out joint, hacking for key, scrubbing down with water complete all as specified and directed. 37 S&F for wire netting of galvanised steel wire 0.71 mm dia fixed with tinned tacks of wire staples size of mesh 12 mm for fixing at junction of wall, beam and columns prior to plastering complete all as specified and directed. 38 M&L for 15 mm thick ready mix plaster on brick/concrete/stone surfaces including finishing the surfaces fair and even (without using extra cement) and smooth as per manufacturers direction complete all as specificed and directed.Make :- Ultratech readyplast, JSW Enduroplast, Hiscon Industries 39 M&L for applying Two coats of Damp proof coarse (Primeless high build water based elastomeric exterior wall waterproof acrylic coating for exterior surfaces) designed with weather resistant acrylate polymers, UV resistant and good hiding and spreading, developing a strong inter coat adhesion with the substrate therefore no separate primer is required, features such as Water proofing, UV protection, Anti algae resistance, crack bridging of elastic films covering hair line cracks, long term protection, colour variants. Preparation of surfaces by cleaning the surfaces till it is free from dust , grease and flaking paint, any unstable paint to be removed , using high pressure wash or scraper, whichever is appropriate . Algae and fungus on the wall to be removed by using high pressure wash or coir brush and shall be treated with fungicidal solution, all surface cracks upto 5 mm width should be filled up with Crack-X-paste as specified complete all as specified and directed by Engr-in-Charge. Note : 1. Application for verticle surface fresh plaster or repainting on old prepared surfaces.2. Use it directly from the container, Stir contents well before use.3. Brush/ roller apply a self priming coat of it on the vertical wall surface in SSD condition, diluting 1 litre with 100 ml clean potable water. Allow it to dry for 4-6 hours.4. Apply a coat of it without dilution as waterproof top coat, either by roller or brush with force coverage at the rate of 3.7- 4.1 Sqm / litre to achieve DFT of 100- 110 microns. Allow it to dry for 4- 6 hours. Lighter shades of white base on the top of dark colours need additional coat for finishing.5. An additional coat should be applied in case of horizontal surfaces like the top of windows, ledges, parapet wall etc. Allow the coating to full air cure for 7 days.Make: Asian/ Dr Fixit / Berger 40 M&L for Two coats on new work of distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturers specification, complete all as specificed and directed. Note: Putty shall be measured and paid for separately under respective item. 41 Complete removal of existing treatment on walls (any number of layers) by scrapping with steel scrappers or any other means and applying two coats of oil emulsion distemper,white or tinted over one coat of white cement based putty (where required) all as specified and directed.Note: Putty shall be measured and paid for separately under respective item. 42 M&L for applying of 1 mm thick white wall care water proof putty on walls complete all as specified and directed. 43 M&L for preparation of new surfaces of wall including brooming down or steel wire brushing and applying three coats of white wash complete all as specified and directed. 44 S&F for 4 mm thick sheet glass ordinary quality and glazing with oil putty/wooden beads/aluminium snap beading with neoprane rubber gasket or wire staples etc. fitted to metal/wooden/aluminium surrounds complete all as specified and directed 45 S&F in repairs stainless steel 20 mm dia drapery/ curtain rod with fancy type brackets/holders for hanging and fixing complete all as specified and directed. 46 S&F in repairs WHB, oval type of selected quality fixed with granite for under counter of approved make decorative type including waste coupling and waste pipe,complete fixed in repairs all as specified and directed by Engr- in -charge. 47 S&F in repairs 15 mm Pillar taps, fancy type cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered Hot or Cold with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed. 48 S&F in repairs Soap dish, CP fixed to plugs with chromium plated brass screws complete all as specified and directed. 49 S&F in repairs vitreous china wash down water closet pan (Pedestal pattern), white(excluding fixing bolts, flushing cistern and flush pipe) and including plastic seat cover with aluminium hinging device complete all as specified and directed. 50 S&F in repairs vitreous china WC squatting pan Orissa Patternsize 580mm x 440mm white with integral foot rests, including provn of cement concrete bedding and P or S trap as required incl connection to trap, and to flush pipe, anti syphonage pipe, etc. complete including making good to floor complete all as specified and directed. 51 S&F in repairs 10 ltrs capacity,PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets incl flushing pipe complete all as specified and directed. 52 S&F in repair vitreous china Urinal, full stall type, white (excluding flushing cistern, flush pipe and waste pipe) including LDPE pipe 32 mm dia complete all as specified and directed. 53 S&F in repairs brass chromium plated tubular towel rail, 20mm dia, D type, 60 Cm long between flanges, complete all as specified and directed. 54 S&F in repairs 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washerscomplete all as specified and directed. 55 S&F in repairs 100mm dia CP grating complete all as specified and directed. 56 S&F in repairs PVC connection 15mm size with PTMT nuts of length 600 mmfixing complete all as specified and directed by engr in charge. 57 S&F in repairs PVC (SWR) floor trap plain with grating including jointing with solvent cement 75mm bore complete all as specified and direcetd. 58 S&F in repairs PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified and directed. 59 S&F in repairs for chromium plated shower rose 125 mm with or without swivel joints, with shower arms any size, including fixing to steel pipe or union complete all as specified and directed. 60 S&F in repairs 15 mm stop valves (Concealed type), chromium plated, fancy type, long shank and cup, cast copper alloy, screwed down, highpressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed. 61 S&Ffor 15 mm bore bib taps, cast copper alloy, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferulle and fixed complete all as specified and directed. 62 S&F in repairs 15 mm bore, stop cock, cast copper alloy, chromium plated with long shank and cut (angle valves ), screwed down, screwed for iron pipe or union complete as specified and directed. 63 Taking up or down 20 mm bore GI steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed. 64 S&F 20 mm GI tube, medium grade, with all necessary fittings and fixed complete to wall and ceiling or laid in floors (Concealed type) complete all as specified and directed. 65 Taking up or down 15 mm bore GI steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed. 66 S&F 15 mm GI tube, medium grade, with all necessary fittings and fixed complete to wall and ceiling or laid in floors (Concealed type) complete all as specified and directed. 67 M&L for precast cement concretetype B1 1:2:4 (Using 20mm graded stone aggregate) as in landings, cover slabs, precast man hole covers, set in CM 1:4 completeall as specified and directed. 68 Excavating in trenches, n exc1.5 m wide and n exc 1.5 m indepth in any type of soil for foundation, etc. orfor shafts, wells, cesspits,manholes, pier holes, etc. nexc 10 sq m on plan and n exc1.5 m in depth and getting out complete all as specified and directed. 69 Demolition and breaking up of 150 mm dia of drain pipes (salt glazed ware, AC or reinforced concrete) set in cement mortar complete all as specified and directed. 70 M&L for cement concrete 1:4:8 type D2 (Using 40mm graded ston aggregate) concrete bed to drain pipes 150 mm dia including packing under, and haunching against the sides of pipes after they are laid and tested, complete all as specified. 71 Cutting into existing manholes /septic tanks for connecting new drains, making good to pipes and rendering, cutting out existing benching for forming branch channel (1/2 round or 3/4 section ) in cement concrete 1:2:4 type B1 using 20 mm graded aggregate, smooth finished, and reforming benching as required for dia 150 mm complete all as specified and directed. 72 Returning filling in, any type of soil including spreading, levelling, watering and well ramming in layers n. exc 25 cm complete all as specified and directed. 73 Removingexcavated material exc. 250 m but n exc. 500 m and depositing where directed at a level n exc 1.5 mtr above starting point complete all as specified and directed. 74 S&F in repair 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches/floors complete all as specified and directed. 75 S&F in repair 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints,fixed to walls fixed with MS clamp complete all as specified and directed. 76 S&F in repair 110 mm bore PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and directed. 77 S&F in repair PVC (SWR) bends any radius 110 mm dia all as specified and directed. 78 S&F PVC (SWR) vent cowl 110 mm complete all as specified and directed. 79 M&L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. 80 Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed. 81 S&F for rolled mild steel work as in rafter, purlins, trusses and like (beam, tee, angle, channel or flat sections (Fe 410-W(Gde E-250 quality) complete all as specified and directed by Engr-In-Charge. 82 Dismantling of asbestos cement (corrugated, semi corrugated etc.) sheets inroof coverings, including ridge complete all as specified and directed. 83 S&F for pre-painted galvalume aluminum zinc coating GI based corrugated steel sheeting 0.50mm thick (AZ-150) of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, chajjas,fixedwith self tapping screws complete all as specified & directed 84 S&F for pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick (AZ-150) of any colour having tensile strength of 550 Mpaas in roof covering/cladding to wall, fixed with self tapping screws as specified and directed. 85 M&L for preparation of new or previously untreated surfaces of steel and iron surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of zinc chrome primer, complete all as specified and directed. 86 M&L for preparation of old painted steel surface of any description exceeding 10cm width or girth and applying one coat of synthectic enamel paint of approved tint complete all as specified and directed. 87 M&L preparation of new or previously untreated wooden surface of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and as directed. 88 Dismantling of wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as specified and directed. 89 S&F for providing & fixing false ceiling at all heights with GRG (Glass Fibre Reinforced Gypsum) false ceiling tiles of semi perforated 12mm thick micro tegular Size 595 x 595 mm of approved texture, design and patterns having moisture content less than 2%, humidity resistance of 99%, NRC0.50 to 0.75 as per IS 8225:1987, Non combustible as per BS 476 (part 4 )-1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on interlocking metal T-Grid of hot dipped galvanized iron section of 0.33mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main-T runners of size 15 x 32 mm of length 3000mm,cross-T of size 15x 32mm of length 1200mm and secondary intermediate cross-T of size 15 x 32 mm of length 600mm to form grid module of s1ze 600x 600mm, suspended from ceiling using galvanized mild steel items (galvanizing @ 80 grams per sqm) i.e 50mm long, 8mm outer diameter M-6 dash fasteners, 6mm dia fully threaded hanger rod upto 1000 mm length and Lshape level adjuster of size 85x25x2mm. Galvanised iron perimeter wall angle of size 24x 24x0.40mm of length 3000 mm to be fixed on periphery wall partition with the help of plastic rawl plugs at 450 mm center to center and 40mm long dry wall wood screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in-Charge. 90 S&F in repairs 18/19mm thick block boards, grade 2, quality, interior grade, commercial type and both faces is covered with approved pattern decorative coloured laminate type 1 of 0.9mm thick, and all around side faces is covered with decorative lipping complete prepared as in cup board shutter and fixed with wooden frame-work to wall with angle iron support and self drilling screws complete alll as specified and directed. 91 M&L for exc 13 but n exc 25 sq cm Plain fillets, 2nd class soft wood, square, rectangular or triangular in section, clean sawn, secured with nails or brads complete all as specified and directed. 92 S&F for hydraulic soft close auto hinges, thickness 1-1.5 mm, size 4 inch brass finish 90 Degree opening angle silver colour fixing with screws to cupboard etc. complete all as specified and directed by Engr-in-Charge. 93 S&F for brass drawer/cupboard pulls, 3 screw plate with fixed dished pull; 80 mm to 100mm long fixed with nut, screw and washer of brass polished, bright finished complete all as specified and directed. 94 S&F brass locks, cupboard, grade I, size 50 mm brass 2 levers complete all as specified and directed. 95 Demolition and breaking up 200 mm drain pipes (salt glazed ware, AC or Reinforced concrete) set in cement mortar /concrete complete all as specified and directed. 96 S & F (DWCPE Pipe) 200 mm dia, class SN-8 structural Wall polyetylene ( Pipe with online coupler and elastomeric rubber ring ) with hollow annular smoothouter surface and a smooth inner surface ( double wall plain ) for non pressure unerground drainage and sewage application Type B Nomial size ( Dn /ID )made of polyethylene ( PE ) materia;l confirming to ISI 6098 ( Part II : 2013 and to be transported handledinstalled and joied asper Annex A Of ISI 6098 ( part II :2013complete all as specified 97 Removal of surplus spoil/excavated material to a distance exc 1.50 km but nexc 5.00 km and depositing where directed at a level n exc. 1.5 m above the starting point. 98 Demolition of Concrete (unreinforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed. 99 M&L 15 mm thick rendering in CM 1:4 on brick/concrete surfaces of walls including finishing the surfaces even and smooth (without using extra cement) complete all as specified and directed. 100 S & F in repairfactory made precastcement concrete cover M-20 with8 mm dia ,MS Bar @ 100 mm c/c both way and MS hook Both side complete sizes - ( Rate Inclusive of reinforcement and Hook ) 101 450x600 mm x 70 mm 102 Note:1.Contractor should bear the cost for any damage to electric cable, pole transformer, water supply line, ofc and nfc cable during excavation for sewage line2.Contractor should repair road cutting and area drainage if reqd during the execution work 103 Excavation in trenches, not exceeding 1.5m wide and not exceeding 1.5m in depth for foundation etc or not exceeding 10 Sqm on plan and not exceeding 1.5m in depth for shafts, cesspits, manholes, pier holes, etc and getting out in hard/dense ofsoil complete all as specified and directed. 104 M&L for cement concrete 1:3:6 type C-2 using 40mm graded stone aggregate in foundations, filling and mass concrete including sub base of floors complete all as specified and directed. 105 Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using ex- tra cement, including forms, moulds, mitred/ stopped ends etc. complete all as specified. 106 M&L on site LLDPE septic tank designed to carry sewage and sullage water, excavation in any type of soil, PCC 1:4:8 below foundation, Vent shaft, connection etc., complete for 20 User 107 M&L for point wiring for light , fan point and bell pointwith 1.50 sqmm (nominal area), FRLS PVC insulated, unsheathed, multi-stranded copper conductor cable, 1100 volts grade, ISI marked controlled by one one-way switch, drawn through and including non metallic rigid PVC conduit, concealed (ISI marked), medium grade not less than 20 mm dia with all conduit accessories in concealed wiring system by cutting of wall (brick or stone) and making good disturbed surface of wall in CM 1:3 (except on ceiling for fan point only surface casing capping will be be used in lieu of connected PVC Conduit) including one run of 1.5 sqmm copper conductor as earth continuity wire connectedto common earth dolly, sunk sheet steel terminal box made out of 1.20mm thick GI/MS sheet for mounting of fitting like switches, socket, fan regulators etc with 3mm thick laminated hylem sheet cover complete all as specified and directed.Note : Wiring to be done as per arroved colour code in IE rule. 108 All as per item No 1 above but for 3 pin 5 amp socket outlet on independent board complete all as specified and directed. 109 All as per item No 1 above one 3 pin socket outlet 5 Amps on same board all as specified and directed. 110 All as per item No 1 above but for 3 pin socket outlet 15 Amps on independent board elect wiring 2.5 sqmm complete all as specified and directed. 111 S&F modular switch piano, flush type, single pole, one way 6/16 Amps, 240V, 50Hz, AC ISI marked complete all as specified and as directed. 112 S&F in repairs ceiling roese surface bakelite, three terminals 240Vm 50Hz, ISI marked complete all as specified and as directed. 113 S&F modular socket outlet, 2 module, multipurpose having provision for 2 & 3 pin 6/16 Amp flush type 240V Ac complete all as specified and as directed 114 S&F modular white colour plate with frame, 14 module all as specified and directed 115 S&F modular white colour plate with frame, 8 module all as specified and directed 116 S&F modular white colour plate with frame, 4 module all as specified and directed 117 S&F modular white colour plate with frame, 3 module all as specified and directed 118 S&F for LED 20/21 Watt tube light fitting (T8 type) ,including LED retrofit tube 20/21 W one side connection type, 240 v, PF > 0.90, colour Temp 6500 K, system luminious efficacy > 100Lm/W, complete with powder coated CRCA decorative pattern suitable for surface mounting on wall,complete fittingincluding connecting with PVC insulated multistranded copper flexible cable 0.5 sqmm two core, and PVC round block white colour x 2 Nos for mounting of fitting complete all as specified & directed. Make :-Havells cat Part No. BS20WLED840SPCWH, Orient Cat Part No -LTRAQ-24-C, Bajaj Cat Part No-830414 or equivalent in Philips/ Crompton (Titania LED tube with Regal batten LED)as approved by GE. 119 S&F for ceiling fans 230V 1200mm sweep with blades, down rods, electronic requlator 5 step, 100 Watt and accessories, minimum air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and directed Note :- Old/unserviceable ceiling fans to be deposited at MES Store yard 120 S&Ffor exhaust fan, rust proof steel body AC single phase, 230V of size 450mm sweep with blades and frame and louvers inclusive of all necessary fittings including drilling of hole and repairs of disturbed surface all as specified and directed Note- Old/unserviceable exhaust fan to be deposited at MES store yard 121 Supply and fix electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5, Star rated complete with all ccessories such as safety valve, thermostate, NRV, connection piece etc. 122 S&F in repairs building security light fitting 35 watt, made up of pressure die-cast aluminium housing with gigh efficient LED as lighting source and pc over having top opening separate driver compartment with IP-66 protection and impact resistance of IK-07 including suitable galvanized iron pipe light grade brackets 1.0 mtr length bent to shape to obtain required shape including clamps, nuts/bolts/washer etc connecting with suitable copper wire size 23/0.0076 complete including all accessories (bracket, clamps fo fitting on wall) complete all as specified and directed 123 S&F in reairs factory made epoxy powder coated distribution board TP &N 4 way (VTPN MCCB DB) and space for MCCB as incomer, with metal door (IP-43 protection) fabricated from CRCA sheet and fixed semi flush to wall and suitable for universal mounting and including isolated neutral bar, Insulated busbar assembly, neutral bar, standard DIN rail, Earth bar and cable ties for cable managemengt top and bottom removable gland plateds with knock outs complete all as specified and directed 124 S & F sheet metal enclosure for MCB, DB, SPN, 240 Volts, 200 amps rated busbar, 4 way Double door enclosure made up of CRCA sheet steel, RAL 9003 powder coated, IP-43, including wooden rectangle board of first quality of suitable size for mounting of DB box complete all as specified and directed by Engr-in-charge. 125 S&F MCB SP 240 volts, 06 to 32Amps, 10 KA breaking capacity,C Curve including connection with suitable size aluminium / copper lugs complete all as specified and directed by Engr-In-Charge. 126 S&F MCB SPN 240 volts, 32Amps, 10 KA breaking capacity,C Curve with over load and short circuit protection and rupturngincluding connection with suitable size aluminium / copper lugs complete all as specified and directed by Engr-In-Charge. 127 M&L for sub main wiringwith two runs ofsingle core PVC insulated unsheathed cable 1100 volts grade, multistranded copper conductor FRLS cable of 6.0 Sqmm(with colour code), drawn in but including non metallic rigid PVC conduit of 25 mm dia, ISI markedincludingone run of PVC insulated unsheathed, multistranded copper conductor FRLS cable of 6.0 Sqmm (Green colour) as contineous earth conductor cable connected to earth dolly in surface/ recess complete all as specified and directed by EIC.Note:- (i) Wiring to be done as per apporved colour code in IE Rule.(ii) Two runs of 6.0 sqmm Cable one run of 6.0 sqmm cable of earth conitinuity conductor & PVC conduit pipe shall be measured as one unit lenght. 128 M&L for Sub main wiringwith approved colour coding as per IS two runs ofsingle core PVC insulated unsheathed cable 1100 volts grade, multistranded copper conductor FRLS cable of 4.0 Sqmm(with colour code), drawn in but including non metallic rigid PVC conduit of 20 mm dia, ISI markedincludingone run of PVC insulated unsheathed, multistranded copper conductor FRLS cable of 4.0 Sqmm (Green colour) as contineous earth conductor cable connected to earth dolly in surface/ recess complete all as specified and directed by EIC. (i) Wiring to be done as per apporved colour code in IE Rule.(ii) Two runs of 4.0 sqmm Cable one run of 4.0 sqmm cable of earth conitinuity conductor & PVC conduit pipe shall be measured as one unit lenght. 129 M&L for earthing complete with galvanised steel earth plate electrode 60×60cm×6mm thick, buried directly in ground (earth pit not less level) with top edge of the plate not lessthan 1.5 metres below normal ground level, connected to galvanised iron earth wireof 4.0 mm as earthing lead by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 SSR including earth pit in any soil char coal common salt , 15 mm all around earth plate PCC (1:3:6) type culprit, with 40 x40x6 mm angle iron frame and PCC cover (1:2:4) type B1 using 20mm graded stone aggregate, water pipe funnel and GI protection pipe light grade 15mm dia upto panel connecting earth lead to panel all as specified and directed by EIC. Note : Earth continuity conductor including protection pipe up to 7.5 mtrs from earth electrode will be included in unit rate. 130 S&F in repairs LED ultra slim decorative aluminium casted edge ceiling light, protected type ceiling mounted LED 2x2, luminaire 36 watt with all accessories internally pre-wired and including connecting with PVC insulated multistranded copper flexible cable 0.5sqmm two core complete all as specified and directed 131 Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete. 132 S&F in replacement sheet metal plug & socket, single pole and neutral with and including 1 No single pole MCB 20 Amps 240V complete all as specified and directed 133 S&F in positionrotational moulded polyethylene water storage tanks, 3 layers,(cylindrical vertical with closed top)of capacity 2000 litres hoisted and fixed in position all as specified and directed. 134 Supply and laying GI tubing medium grade(as per IS 1239), inclusive of all fittingsof size 25 mm including provision of tapping to main water pipeline , including laying down in trenches complete all as specified and directed . 135 Supply and laying GI tubing medium grade( as per IS 1239),inclusive of all fittingsof size 20 mm including provision of tapping to main water pipeline , including laying down in trenches complete all as specified and directed . 136 S&F forgun-metal,gate valves of size 25 mm, with iron wheel head, screwed both ends for iron pipe and fixed all as specified and directed. 137 S&F for gun-metal,gate valves of size 20 mm, with iron wheel head, screwed both ends for iron pipe and fixed all as specified and directed. 138 Supply and Laying, connection and testing LT XLPE insulated, PVC sheathed, armoured, heavy duty electric under ground cable, with stranded aluminium conductor, 1100 Volts grade of size 25sqmm 4 Core, laid in trenches/floor or fixed on wall/pole complete all as specified. 139 M&L for sand filling with clean dry fine sandunwashed including gently punning around cables in trencheds for cable proctection (8cm below cable & 15 cm above cable) complete all as specified and directed 140 S&L reinforced concrete cable cover, class LV type I, flat size 250mmx150mmx40mm all as specified and directed 141 S&F for 40mm GI Tubes, light grade galvanised, with all fitting and laid in floors, under road, pavement or hard standing steel water tubing bore of tube 50 mm. 142 Deduct Schedule of credit (calculation will be done off line)Rs.58815.00
