|
| 1 | Taking down chowkhats or frames (without taking off shutters from the frame) n. exc 1.5 Sqmincl cutting holesand making good reqd shape for hold fast block for new frame complete all as specified and directed. |
| 2 | Taking down chowkhats or frames (without taking off shutters from the frame) exc 1.5 Sqm and n. exc 4.00 Sqm incl cutting holesand making good reqd shape for hold fast block for new frame complete all as specified and directed. |
| 3 | S & F for powder coated aluminium ventilator shutters with frame not less than 0.55 Kg/Rm, half bottom portion fixed with 4mm thick glass with fixed type shutter and top half portion lower type with 4mm thick frosted glass and outer side fixed with stainless steel wire mesh, shutters aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, necessary aluminium fittings etc complete all as specified and directed. |
| 4 | S & F for Steel rolling shutters 1.25mm thick with ball bearing, as specified including top cover, an choring rod, hasp and staple and one shop coat of primer; erected in position as indi cated, complete: push pull or manual type complete all as specified and directed. |
| 5 | S & F forFramed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framedbalusters; walk ways; railings; framework of water tanksand similar work con- forming to Fe.290.Gde-E-165 complete all as specified and directed. |
| 6 | Demolition of stone slabs and tiles laid, bedded and pointed in any mortar of any description or thickness in floors, aprons etc complete all as specified and directed. |
| 7 | M&L for Glazed ceramic tilesof size300 mm x 450 mm x 7mm thick (coloured) of superior qualityfixed on vertical surfaces such asskirting/dado etc, set and jointed in neat cement slurry over 10mm thick backing coat in CM (1:4)and pointed in coloured cement to match the colour of tile complete all as specified and directed. |
| 8 | M&L for non skidceramic tiles of size 7 to 8mm thick (coloured) (Square/rectangular) size of tile 300mmx300mm, in floors, set & jointed in neatcement slurry and pointed in coloured cement over 15mm thick screed bed in CM (1:6) complete all as specified and directed. |
| 9 | M&L for Machine cut kota stone slab flooring18-20 mm thick (size 595 x 595mm) over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab inclunding rubbing and polishing complete including screed bed 15mm thick in CM (1:6) complete all as specified and as directed. |
| 10 | M&L for Machine cut kota stone slab on steps as inriser/tradein single piece of any size 18-20 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab inclunding rubbing and polishing complete including screed bed 15mm thick in CM (1:6) complete all as specified and as directed. |
| 11 | M & L 20 mm thick granite (of any type) work( table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and likeincl 10mm thick rendering in CM 1:4, pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite slab , notching and mouldingcomplete all as specified and as directed . |
| 12 | S & F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws including dismantling of plain or corrugated sheeting any gauge thickness including Nainital or similar pattern as in roof covering complete all as specified and as directed. |
| 13 | S & F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws including dismantling of plain or corrugated sheeting any gauge thickness including Nainital or similar pattern as in roof covering complete all as specified and as directed. |
| 14 | Dismantling timber scantlings (Purlins/Rafters) any sec and size, in any position complete all as specified and as directed. |
| 15 | S & F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240 complete all as specified. |
| 16 | Taking down cement plaster of any description, any thickness from surfaces of walls/soffits of roof projections & chajjas /ceilings etc. incl raking out joints, hacking for keys, scrubbibg down with water etc complete all as specified and directed. |
| 17 | Demolition of brick work / stone boulders masonry built in cement mortar incl all Quoins , archeas, pillars etc bu exc cluding ashlar facings, dressed stone work and precast concrete articles complete all as specified and directed. |
| 18 | M & L for Brickwork with fly ash Old size bricks, straight or curved on plan exc 6m mean radius, built in in CM 1:6 etc complete all as spd and directed. |
| 19 | M & L for 15mm thick rendering in cement mortar 1:4 on fair face of brick walls/ concrete surfaces and finished even and smooth without using extra cement in any position incl scafolding etc, complete all as specified and as directed. |
| 20 | M & L for 15mm thick rendering in cement mortar 1:6 on fair face of brick walls/ concrete surfaces & finished even and smooth without using extra cement in any position incl scafolding etc, complete all as specified. |
| 21 | M&L preparation of new plastered surface of walls and applying two coats of oil bound distemper over 1.5mm thick wall care putty over one coat of chalk whitening primer complete all as spd and directed. |
| 22 | M & L for preparation of new plastered surface of wall/fins/facia/chajjas etc and applying two coat of exterior weather proof 100% anti fungal acrylic smooth emulsion with silicon additives over a coat of exterior primer, exterior weather proof offer anti alge high performance exterior wall finish any colour/ tintcomplete all as specified and directed. Make: Asian (apex ultima), Berger (wather coat), nerolac (excel total). |
| 23 | M & L two coat of synthetic enamel paint (finishing coat) over one coat of primer to newsteel surfaces of any description over 10 cm width or girth incl prepration of surfaces complete all as specified. |
| 24 | Demolition of cement concrete (unreinforced) in ground floor or in any position and paving not exc. 15 cm thick (below or above ground level) complete all as specified and as directed. |
| 25 | M & L for 75 mm thick cement concrete 1:3:6type C2(using 40mm graded stone aggregate) as in plinth protection laid in bays & surfaces finished even and smooth without using extra cement, complete all as specified and as directed. |
| 26 | Taking up or down 15mm bore steel tubing and connections, including cleaning for refixing or removal to store complete all as specified. |
| 27 | Taking up or down 20mm bore steel tubing and connections, including cleaning for refixing or removal to store complete all as specified. |
| 28 | S & F 16mm dia CPVC pipes with all fittings SDR 11 & Plain CPVC SDR 11fixedto walls and ceilings with adequate nos of clamps or laid in floor/walls including cutting chases in stone,concrete block or slab wall pinning in making good to facing where ever required to the sufraces for concelled water supply including CPVC & BRASSfittings such as (elbow, tee, socket, reducer, nipple, union, bushing, step over bends, end cap, end plugs, male/female threaded adaptor, flange, tank adaptor) and any other fittings required for fixing of sanitary/plumbing items complete all as specified and as directed. (Note : No extra payment shall be made for cutting chases & CPVC & BRASS fittings) |
| 29 | S & F 20mm dia CPVC pipes with all fittings SDR 11 & Plain CPVC SDR 11fixedto walls and ceilings with adequate nos of clamps or laid in floors including cutting chases in stone,concrete block or slab wall pinning in making good to facing where ever required to the sufraces for concelled water supply including CPVC & BRASSfittings such as (elbow, tee, socket, reducer, nipple, union, bushing, step over bends, end cap, end plugs, male/female threaded adaptor, flange, tank adaptor) and any other fittings required for fixing of sanitary/plumbing items complete all as specified and as directed. (Note : No extra payment shall be made for cutting chases & CPVC & BRASS fittings) |
| 30 | S&F in repairs 20mm bore CPVC gate valves screwd both ends for CPVC pipescomplete all as specified and directed. |
| 31 | S & F Rotational moulded polyethylene water storage tanks 1000 lts capacity, tripple layered (cylindrical vertical with closed top) hoisted and fixed in position including 20 mm dia PTMT ball valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed including taking out existing unserviceable overhead tank of any description complete. |
| 32 | S & F 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers as directed. |
| 33 | S&F in rep vitreous china squatting Pan “Orissa” Pattern, of size 580mm x 440mm white with integral foot rests and trap (excluding flushing cistern and flush pipe) including provn of cement concrete bedding complete asfixed complete all as specified. |
| 34 | S&F in repair PVC valveless flushing cistern, low level white with inlet ball valve float and handle including brackets complete fixed capacity of flush 10 ltrs complete all as specified and as directed. |
| 35 | S & F in repairs PVC connections 15mm size with PTMT nuts of length 600mm complete all as specified and as directed. |
| 36 | S&F in repair Brass chromium plated shower rose 125mm size complete all as specified and as directed. |
| 37 | S&F in repair brass chromium plated Tubular towel rail 20mm dia, D type, 60cm long between flanges. |
| 38 | S&F in repair 15mm bore Bib cock chromium plated Make Jaquar continental series or equivalent in Cera, Marc or Parryware complete all as specified. complete all as specified and directed. |
| 39 | S & F in repair 15mm bore angular stop cock chromium plated with wall flange of Make Jaquar continental series or equivalent in Cera, Marc or Parryware complete all as specified. |
| 40 | S&F in repair stainless steel soap dish, complete all as specified and as directed. |
| 41 | Taking down eaves gutters andrainwater pipes (any size orpattern), including all fittings,heads, shoes, bends, swan-necks,etc., including cleaning or refixingor removal to Store (measured overall as fixed along the centre line over fittings and accessories |
| 42 | S&F for 110mm bore of PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or in floors including fixing stac clamps complete all as specified and as directed. |
| 43 | S&F PVC (SWR) bend with access door any radius 110mmcomplete all as specified and directed. |
| 44 | S & F in repair PVC (SWR) floor trap 75 mm boreplain with grating including jointing with solvent cement and fitting complete all as spd and directed. |
| 45 | S&F for Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 50 x 75mm single rebate comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (Cost of M.S. hold fast/ lugs or SS dash fasteners shall be included in quoted rates).Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made Make : ECHON/Sintex/Rajshree/Navaratan |
| 46 | S&F 28-30 mm thick moulded Prelaminatedboth side WPC factory made 100% solid door (conforming as per IS-4020) made from 100% lead free single extruded with 2, 4 or 6 raised panel design on the front side with 10 mm deep mould on both side with wood grain texture both side with density not less than 600 Kg/cum.Manufactured by an ISO : 9001-2015 certified company. The door should be water proof, termite proof, fireretardant and having screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50N/ mm2, modulus of elasticity 850N /MM2 and resistance to spread of flame of Class A category with property of being termite/ bore proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S. screws, all as per direction of Engineer-in-Charge. (Note : Stainless steel butt hinges and necessary SS screws shall be paid separately) |
| 47 | S&F 100 mm long butt hinges stainless steel medium weight complete fixed with full body threaded Star headed counter sunk SS screws all as specified and as directed. |
| 48 | S&F 150mm long Aluminium anodizes barrel tower bolts of extruded section complete all as specified and as directed. |
| 49 | S&F 150mm size aluminium anodized handle complete all as specified and as directed. |
| 50 | M & L for Coloured Machine pressed precast conctete interlocking paver block of any shape and size (Two colour combination) confirming to IS 15658-2006 of 80 mm thick, M-40 Grade with grey cement and pigmentlaid dry in floor/path complete including 30mm thick sand cushioning all as specified and as directed. |
| 51 | M&L for PCC 1:4:8 type D-2 (using 40mm graded stone aggregate ) as in sub base or under floor etc complete all as spd and directed. |
| 52 | Excavation in trenches not exc 1.5m wide and not exc 1.5m in depth for foundation exc on for walls, shafts, manholes not exc 10 Sqm on plan or for laying pipes/cables etc and getting out in soft/loose soil complete all as specified and as directed. |
| 53 | Returing filling in incl spreading levelling watering and well ramming in layers not exceeding 25cm in soft or loose soil complete all as specified and as directed. |
| 54 | Removing excavatged matereials to a distance not exc 50m and depositing where directed at a level not exc 1.5m above the starting point in soils complete all as specified and as directed. |
| 55 | M & L for formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and similar work; vertical or to batter complete all as specified and directed. |
| 56 | M & L for Formwork to sides of pillars, posts, struts, piers,columns and stanchions square or rectangular rough finished surfaces of concrete laid flat complete all as directed. |
| 57 | M & L for mild steel TMT bar 10mm dia and over cut to length,bent to shape required including cranking bending spirally for hooping for columns hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed. |
| 58 | M & L for TMT bars 5mm dia upto and including 10mm dia as in stirrups, spacers and binders cut to length,bent to shape required including cranking bending spirally for hooping for columns hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed. |
| 59 | M & L for RCC M-25 (Nominal Mix) (20mm graded stone aggregates) in Columns, pillars, piers, posts and struts etc. complete all as specified and directed. |
| 60 | M & L for RCC M-25 (Nominal Mix) (20mm graded stone aggregates) in foundations, including rafts, footings, foundation beams; bases for columns etc.complete all as specified and directed. |
| 61 | Excavation over area n exc 1.5M deep and getting out in soft/loose soil complete and directed by Engineer-in-Charge. |
| 62 | Excavation over areas exc 1.5M deep and nt exc 3.0M deep and getting out in hard/dense soil complete and directed by Engineer-in-Charge. |
| 63 | Excavation over areas exc 1.5M deep and nt exc 3.0M deep and getting out in hard/dense soil complete and directed by Engineer-in-Charge. |
| 64 | M&L forForming embankments including raising(orlowering)earth,spreading in layers n exc. 30 cm thick; watering,ramming/rolling and finishingto requiredsize, shape,etc., n exc. 1.5 m high from base all as specified and directed by Eng-incharge. |
| 65 | M&L for stone masonary walling of random rubble uncoursed ,well bonded, beded and solidly hearted built in CM 1:6 |
| 66 | M&L for boulder pitching, grouted with cement and sand mortar including boulders all as specified and directed by engr incharge |
| 67 | M&L for Extra over stone walling for hammer dressing to face stones and dressing of face beds and joints, as specified, of random rubble walling, uncoursed or brought upto courses all as specified and directed by Engr in charge. |
| 68 | M&L for Raised pointing to random or polygonal rubble, uncoursed orbrought upto courses with cement mortar (1:4) all as specified and directed by Engr in charge. |
| 69 | S&F for 110mm bore of PVC (SWR) pipes single socketed in any length with rubber ring joints laid on wall complete all as specified and as directed. |
| 70 | Providing precastce- ment concrete (1:2:4)in bond stone (in retaining walls) win- dow or door cills,lintels,bressumers,steps,quoin blocks (for use with masonry), string courses, copings. kneelers, apex stones, pier caps, columns, posts,boundary pillars, bed plates, pintle blocks,ancho-rage blocks, bonders (for stone walling). corbels, brackets, etc. (of any section indicated), with plain fair faces, includingchamfers, weatherings, throat- ing etc. and setting in cement mortar(1:4) complete with joints to match all as specified and directed by Engr in charge. |
| 71 | M&L for cementconcrete 1:2:4 type B-1, using 20mm graded stone aggregate as in coping, bed blocks, filling of hold fast PCC or similar works including formwork complete all as specified and directed. |
| 72 | M&L for brick work with fly ash brick straight or curved on plan exc 6m mean radius, built in CM (1:4) complete all as specified and directed. |
| 73 | Formwork to edges of concrete flats, treads, breaks in floors window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide all as specified and directed by Engr -incharge |
| 74 | M&L RCC 1:2:4 type B1 ( using 20mm graded crushed stone aggregates) as inBeams, cantilevers, bressummers, lintels over 1.5m span |
| 75 | M&L for precast cement concrete 1:2:4 type B1, (using 20mm graded stone aggregates) as in manhole cover slab set in CM (1:6) complete all as specified and directed. |
| 76 | M&L RCC M-25 design mix as in Slabs supported on walls beams and columns in floors roofs, landings(using 20mm graded stone aggregates) complete all as specified and directed. |
| 77 | M&L for formwork to soffits of suspended slabs such as roof slabs, floor slabs landings and similar work not exceeding 200mm thick (Horizontal or slopping) with fair finished curved surfaces |
| 78 | M&L for drilling/boring vertical bores with reverse rotary rig are any other suitable method as per latest enginerring technology practice without casing pipe with202mm dia bit to a depth exceeding 30 m and not exc 40m below ground level includiing all necessary work required for boring and filling of pea gravels all round the lowered pipe etc complete all as specified and directed. Note (i) depth of boring shall be measured from of rechargewell. (ii) Pea gravels for filling shall be measered and paid for seperately |
| 79 | S&F machine pressed precast concrete interlocking paver block rubber moulded, any shape and size confirming ti IS-15658-2006 of 60mm thickness grey cement and withpigment , M-35 gradeincl30mm thick Sand filling to under interlocking tiles complete all as specified and directed. |
| 80 | M&L broken half burntbricks loose filling with aggregates of guage 80 to 150mm in soakage pits soakage well ,rainwater harvesting pits complete |
| 81 | M&L for broken stone boulderof gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick,wateredand rammed to a true surface |
| 82 | M&L for loose filling with pea gravel of size 1/8\" to 3/8\" to as in filter bed complete all as specified |
| 83 | S & F UPVC(sch-40) slotted pipe 200 mm outer dia including bends and fittings etc placed in bore holes complete all as specified and directed. |
| 84 | M & L for uPVCslotted pipe 100 mm outer dia including bends and fittings laid in trenches complete all as specified and directed |
| 85 | S&F single pointed air termination, aluminium rod 12 mm dia and 300 mm long incl suport block incl taking down u/s complete all as specified and directed. |
| 86 | Supply & fix aluminium strip25 x 3 mm complete duly fixed on porcelain/epoxy insulator with the help of nut, bolt, and washers etc for roof and down conductor above ground (all the joint shall be properly riveted and brazed welded), incl taking down any type strip complete all as specified and directed. |
| 87 | Supply and installation of earth continuity conductor or main earthing lead fixed to wall on batten or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc as required 32 x 6mm GI strip any type complete. |
| 88 | S&F earth test point terminal block made of gun metal or phosphorous bronze size 75x75x25mm, drilled and screwed including 3 Nos 8mm dia 25mm long hex. Head screw, including factory made test point terminal box, complete with suitable polycaronate box with lacking arrangement all as specified and directed by Engr-in-charge. |
| 89 | Supply and lay 40 mm bore GI tubinglight grade, ISI marked, for cable protectionatroad crossing/floor/wall/ on poles or at any indicated situation etc duly sealed at both end after drawing cable including necessary clamps,saddels etc complete all asspecified and as directed. |
| 90 | M&L earthing complete with GIelectrode 600x 600 x 6mm, thick buried directly in ground vertically in a pit of depth not less than 2.25 mtr below normal ground level (with top edge of earthplate not less than 1.50 mtr below normal ground level connected to GI strip 32x6mm as earthing lead by means of bolt nuts, check nuts, and washers of brass connected including gun metal or phosphorus bronze of sixe 75x75x25mm drilled and screwed including 3 Nos 8mm dia 25 mm long hexagonal head screwed all as specified including excavation and earth work and disposal of surplus soil incl 40 mm GI tubing light grade and necessary fitting for protection of GI strip incl laying of charcoal dust and common salt PPC (1:2:3) type C-1 (using 20mm graded stone aggregate) for earth pit with 40 x 40 x 6mm MSangle iron frame for cover 40 mm thick (1:2:4) type B20 using 12.5 mm graded stone aggregate reinforced with 8 mm dia round bar @ 75mm C/C both way with MS handle 20mm dia plastering 15mm thick CM (1:6) internally and upto 150mm below ground level externally PGL funnel with ground wire mesh 20mm dia Med grade GI pipe for watering complete all as shown on electrical plate No 3 of SSR Part-1 2009 and connected in earth test incl testing completed all as specified and directed. Note:- GI strip and protecton light grade GI pipe upto 7.5 mtr shall be deemed to be in the rates. |
| 91 | M&L for Providing PCC 1:2:4 type B-1 20 mm graded aggregate for GI tubing post for lightening protection complete all as specified and directed. |
| 92 | Note: Amount of sch of credit of Rs.40456/-will be deducted from total amount of BOQ. |
