Tender For Special Repair Of Bldg No 88/01 Ra Line (Single Offer Accommodation) Of 409 Fd Hosp Under Ge (North) Meerut Cantt.; 1 Taking down old existing water proofing treatment from the top of RCC/ arch slab, including taking down existing PCC padding or plaster and hacking the top of RCC slab, cleaning with water and disposal of rubbish off the premises complete all as specified & directed. 2 Material & Labour for 50mm thick average thickness ofPCC 1:2:4 type B-O(using 12.5 mm graded stone aggregates) as in paddingon roof finished even and fair without using extra cement complete all as specified & directed. 3 Material and Labour for 10mm thick cement paster in CM 1:4 mixed with WPC @ 2 % by weight of cement finised even and smooth without using extra cement on roof surface when concreate is green and wall complete all as specified & directed. Note :- WPC will be measured and paid seperately as supply only rate. 4 Cutting groovesin brick/ concretewall 75 mm wide and 65 mm deep and shaping horizontal face of grooveand making good disturbed surfacein CM 1:3 after inserting APP membrane(Chasing shall be cut where height of parapet wall is more than 300mm.) complete all as specified & directed. 5 Supply only liquid water proofing compound complete all as specified & directed. 6 M&L for water proofing treatment to existing non-accessible roofslabs by providing 10mm thick bedding layer of cement morter 1:3 mixed with water proofing compound as per manufacturers instruction and applying one coat of bituminous/polymerized primer confirming to IS-3384 @ 0.30 Ltr/Sqm and applying of one coat of bonding material using blown type bitumen conforming to IS-702 grade 85/25 @ 1.20 Kg/Sqm and laying of actetic polypropylene (APP) modified membrane pre-fabricated, reinforced with non-woven polyester of 3.50Kg/Sqm (minimum), 3mm thick (minimum), with minimum 75mm side overlaps and 100mmend overlaps and applying one coat of bituminous aluminium paint over APP membrane complete including taking down existing water proofing treatment with bedding layer of cement mortar complete all as specified and as directed. 7 Taking down of cementplaster of any description from brick or stone wall etc. including raking out of joints, hacking for key, scrubbing down with water etc. complete all as specified & directed. 8 M & L 15 mm thick rendering in CM 1:6 on fair faces of brick or concrete surfaces finished even and fair complete all as specified & directed. 9 M & Lfor applying 15 mm thick rendering using ready mix plaster bags in CM 1:4 on brick / concrete surfaces of external walls finished even and fiar, using water proofing compound @ 3% by weight of cement or as per manufacturer instructions, complete all as specified and directed :Note:- Water proofing compound shall be measured and paid sepratlyNote : Contractor is required to deposit ready mix bags for 100% CA quantity to the Engr-in-Charge within 15 days of acceptance of contract. 10 M&L Rendering 5 mm thickon fair faces of concrete surfaces, finished even and smooth on ceiling in cement mortar (1:3), complete all as specified & directed. 11 Preparation of new plastered surface of wall by applying 2mm thick wall care putty and making the surface smooth and applying two coat of oil emulsiondistemper over one coat of primer using roller for painting complete all as specified & directed. 12 Preparation of old surface after complete removal of existing treatment by mechanical means and applying 2mm thick wall care putty over one coat of primer and making the surface smooth and applying two coat of oil emulsion distemper using roller for painting complete all as specified & directed. 13 M& L preparing plastered new surfaces of ceiling and applying three coats of white wash on ceiling surface complete all as specified & directed. 14 M&L for applying 2mm thick wall care putty making smooth surface complete all as specified and directed. 15 Material & Labour for applying Two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces using roller for painting complete all as specified & directed. 16 Demolition ofbrick work or stone/boulder masonary built in cement mortar incl all quoins arches pillars etc. complete all as specified & directed. 17 M & L brick work with sub classfly ash bricks straight or curved on plan exc 6 m mean radis built in CM 1:6 complete all as specified & directed. 18 M&L Brickwork with subclass `B bricks, straight or curved on plan exc 6m mean radius, built in CM 1:6 except bricks complete all as specified & directed. Note :- Old serviceable bricks retrived from demolition shall be re-used under this item. 19 Demolition of cement concrete of ground floor n exc 15 cm in depthin any position nototherwise specifically provided for complete all as specified & directed. 20 M/L 75 mm thick cement concrete 1:3:6 type C-2 using (40 mm graded stone agg) as in sub base complete all as specified & directed. 21 M&L Hardcore Broken stone & boulders of gauge n exc. 63mm, deposited, spread andlevelled in layers n exc. 15cm thick, watered andrammed to a true surface complete all as specified & directed. 22 M&L for chequered cement concrete colour 300mm cmx300mmx25 mm thick, with grey cement and pigment, set, jointed and pointed in neat cement slurry over and including 20 mm thick screed bed in cm (1:6) complete all as specified & directed. 23 M&L for 75mm thick cement concrete (1:3:6) type C1, using 20mm graded stone aggregate as in plinth protection, finishing cement concrete surfaces even and smooth without using extra cement, Joints of plinth protection shall be filled with bitumen mastic (1:3)complete all as specified and as directed. 24 M&L for stone slab 50mm thick stone dressed true and square, in one length not less than 60cm and n. exc 120cm inchajjas, sunshades,Plinth Protection etc., punched dressed on exposed faces and self faced on the embedded unexposed beds and joints; exposed edges rounded or chamfered as directed, set, jointed and pointed in cement mortar 1:4 complete all as specified and directed. 25 Demolition of reinforced concreteof any description and any poisition not otherwise specifically provide ( reinforcement cut to faciliatate demolition) complete all as specified & directed. 26 M & L RCC 1:2:4 Type B1 using 20 mm graded stone aggregate as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves andcomplete all as specified and as directed. 27 M & L precast reinforced cement concrete 1:2:4 type B1 (using 20mm graded stone aggegrate) as in Chullah hood chajja and manhole cover, kitchen shelves etc set in cement mortar 1:6.including all neccesary formwork & finishing exposed concrete surface complete all as specified & directed. 28 M & L RCC 1:2:4 Type B1 using 20 mm graded stone aggregate as in beams, lintels over 1.5 m span etc complete all as specified & directed. 29 Cutting chases ,pinning in brick work girth exc 10cm but n exc 20 cm and making good to facing where required and poiningein cement mortar 1:3 to ends of edges of landing, sun shades, chajjas, shelves etc complete all as specified & directed. 30 M&L for not less than 16 mm thick black granite factory made bull nosed, polished (table rubbed and polished) as in jambs, window cills, cooking platform and the like etc in cement mortar 1:4 including pointing in white cement (1:2) using marble dust and admixture of pigment to match with shade of stone including rubbing and polishing over and including 10 mm thick rendering in cement mortar 1:4 including rounding of edges, making hole for gas pipe complete all as specified and directed. 31 M&L for Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) etc finishedrough and complete all as specified and directed. 32 M&L Form work to sides and soffits of beams lintels etc finishedrough complete all as specified & directed. 33 S&F mild steel deformed bars 10mm dia and over, cut to length bent to shape requiredincluding cranking, bending spirally for hooping for columns, hooking ends and binding with and including MSwire (annealed) not less than 0.9mm dia or securing clips complete all as specified and directed. 34 ditto as per item no 33but 6 to 8 mm dia complete all as specified and directed. 35 Taking down of chowkhats or frame with shutters (without taking off shutters from the frames) n.exc 1.50 Sqm each complete all as specified & directed. 36 Taking down of chowkhats or frame with shutters (without taking off shutters from the frames) exc 1.50 Sqm & n exc 4 Sqn each complete all as specified & directed. 37 S & F for Factory made double extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/Chowkhat of size 65x125 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof,water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). ® Note: For WPC solid door/window frames,minus 5mm tolerance in dimension i.e.depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be madecomplete all as specified & directed. 38 S & F for Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/Chowkhat of size 45x85 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof,water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). ® Note: For WPC solid door/window frames,minus 5mm tolerance in dimension i.e.depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be madecomplete all as specified & directed. 39 S & F for 30mm thick Factory made single extruded WPC (Wood Polymer Composite) solid Moulded WPC door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N edge),minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge.(Note: stainless steel butt hinges and necessary S S screws shall be paid separately) 40 S&F powder coated anodised aluminium windows slidingtype (3 shutter type) with sash bars, aluminium sections weighing 0.55 Kg/mtr (minimum) inclstainless steel mosquito proofing wire mesh fixed with , clips, frame , necessary joining cleats, glazing clips, neoprene rubber gasket with aluminium beading screws suitable anodised fittings such as hinges, handles including powder coated anodised aluminium frame, grill with one or more rebates including S&F 5.50 mm thick black glass complete all as specified and directed. 41 M&L, in repair, 18/19mm thick prelaminated board, exterior grade, prelaminated one side with decorative choice laminations and other side balanceing white lamination, fixed with SS screws to WPC frame work in cup boards, and kitchen cabinet rebated or flat edged fancyhandle , each leaf 02 Nos Magnite lock complete all as specified and directed. 42 M&L Framed work such as grills, angle grating etc. with ends of bars shouldered and or riveted or forged into spikes, framed guard bars, railings and similar work confirming to Fe 290 Gde E-165 complete all as specified & directed. 43 M&L preparation of new or previously untreated steel surface of any description over 10cm width or girth and applying two coat of synthetic enamelover one coat of primer all as specified & directed 44 S&F Butt hinge,Mild steelof 100 mmsize complete all as specified & directed. 45 S&F Butt hinge,Mild steelof 75 mmsize complete all as specified & directed. 46 S&F Aluminium, anodised, barrel tower bolts of extruded section of 200 mm long complete all as specified & directed. 47 S&F Aluminium, anodised, barrel tower bolts of extruded section of 150 mm long complete all as specified & directed. 48 S&F Aluminium handles, cast type, anodised of 125 mm size complete all as specified & directed. 49 S&F Aluminium handles, cast type, anodised of 150 mm size complete all as specified & directed. 50 S & F 150mm long Floor door stopper of aluminiumalloy body and tongue, anodised,with hard drawn steel spring,fixed in floor complete all as specified & directed. 51 S & F for 300 mm long Aluminium alloy, anodised,sliding door bolt with hasp,staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified & directed. 52 Supply and fix 150mm size helical door spring including roller and plate fixed with screws to wooden or welded to iron chowkat complete all as specified and directed. 53 S & FStainless steeldecorated curtain rod with braket and ring complete all as specified and directed. 54 S&F, in repair, stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed. 55 Hacking out old broken glass (any thickness, size, quality or description) not exc 0.5 sq.m from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones complete all as specified and directed. 56 S&F for 3 mm thick plain sheet glass ordinary quality and glazing with oil putty or wooden beads in square area n. exc. 0.5 Sqm in each pane complete all as specified & directed. 57 Taking up or down steel tubing and connections for 15mm bore of pipe complete all as specified and directed. 58 Taking up or down steel tubing and connections for 20mm bore of pipe complete all as specified and directed. 59 S&F, steel water tubes, medium grade, galvanized, with all fittings and fixed to walls and ceilings or laid in floorsfor 15mm bore of pipe complete all as specified and directed. 60 S&F, steel water tubes, medium grade, galvanized, with all fittings and fixed to walls and ceilings or laid in floorsfor 20mm bore of pipe complete all as specified and directed. 61 Supplying and laying of CPVC 20mm outer dia pipes SDR 11 & Plain CPVC SDR 11, with all fittings and fixed on walls/ceiling or laying in floors complete all as specified & directed. 62 M & L cutting chases for concealed water tubing, pinning in, making good of facings where required and pointing in cement mortar 1:3to ends or edges etc, cutting not exceeding 10 cm width or girth, complete all as specified & directed. 63 Supply, hoisting, fixingin position and connecting, in repairs, 500 litres capacity rotational moulded polyethylene water storage tank double layered (cylindrical, vertical with closed top), ISI marked, including fixing arrangement for inlet/outlet/over flow and vent pipe of standard size all as specified in SSR Part-I, with and including dismantlingold U/S water tank complete all as specified and directed. 64 S & F in Repair 20mm dia Ball brass valves,high pressure,with polythene float and flynut complete,screwed for iron pipe or brass ferrule and fixed complete all as specified and directed. 65 S&F in repair gun-metal globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed 20mm bore complete all as specified & directed. 66 S&F, in repair, 600mm x 450mm beveled edge mirror of selected quality glass not less than 5.5mm thick, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed. 67 S&F, in repairs, vitreous china wash basin, white, flat back of size 550mm x 400mm including brackets grouted in cement mortar 1:2 in wall complete all as specified and directed. including32mm dia waste pipe with CP waste coupling pvc connection ,bracket etc in repair complete all as specified & directed. 68 S & F in repair Brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed. 69 S&F, in repair, bib taps, fancy type, cast copper alloy, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or brass ferrule of 15mmbore complete all as specified and directed. 70 S&F in repairFancy type brass chromium plated angle valve 15mm size complete all as specified & directed. 71 S&F, in repair, PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed. 72 S&F in repair vitreous china ware EWC combined pattern complete with internal fittings as specified and directed by Engineer-in-Charge. 73 S&F, in repair, CP Soap dish, any type, fixed to plugs with chromium plated brass screws and complete all as specified and directed 74 S&F in repair brass chromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges and complete all as specified and directed 75 S&F in repair for Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm longand complete all as specified and directed . 76 S&F in repair for Sheet glass corner shelf assembly consisting of 5.5mm thick sheet glass shelf chromium plated bracket guard and railing and complete all as specified and directed . 77 S&F in repair for Chromium plated shower roses with or without swivel joints, any size, including fixing to steel pipe or union and complete all as specified and directed. 78 S&F in repair for sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs,washers and wastes; including bedding in cement mortar to Dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x160mm and complete all as specified and directed. 79 S&F stainless steel plate rack of size 750 x 600 mm incl. shelves , rod to put plates etc made out of 0.80mm thick stainless steel sheet after taking down old one all as specified and directed 80 S&F in repair for Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified & directed. 81 S & F in repair Brass CP wall mixer 15mm dia for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed. 82 S&F PVC grating 100mm diawith waste pipe hole fixed to floor trap in repair and complete all as specified and directed. 83 Dismantling of cast iron, PVC or reinforced concrete drain pipes jointed in cement mortar and taking out of trenches if required for 110mm and 75mm bore of pipe complete all as specified and directed. 84 S&F in,110mm bore PVC (SWR) pipes, single socketed in any length with rubber ring joints fixed to walls including stack clamp complete all as specified and directed. 85 S&F in ,110mm bore PVC (SWR) pipes, single socketed in any length with rubber ring joints laying as in floor and complete all as specified and directed. 86 S&F in,75mm bore PVC (SWR) pipes, single socketed in any length with rubber ring joints laying as in floor and complete all as specified and directed. 87 S&F in ,PVC(SWR) junction single, (Single T) equal or unequal provided with access door110mm bore complete all as specified & directed. 88 S&F in, PVC(SWR) junction single, (Single T) equal or unequal provided with access door75mm bore complete all as specified & directed. 89 S&F inPVC(SWR) bends 110mm bore any radius complete all as specified & directed. 90 S&F in,PVC(SWR) bends 75mm bore any radius complete all as specified & directed. 91 S&F in,PVC(SWR) floor trap, 110mm bore, plain with grating including jointing with solvent cement complete all as specified & directed. 92 S&F in,PVC(SWR) floor trap, 75mm bore, plain with grating including jointing with solvent cement complete all as specified & directed. 93 Cutting into existing manholes for connecting new drains, making good to ipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished, and reforming benching as required for 150mm pipe complete all as specified & directed. 94 M & L concrete bed to drain pipes including packing under, and hunching against the sides of pipes after they are laid and tested in cement concrete 1:4:8 type D2 for 150 mm dia pipe work in foul position complete all as specified & directed. 95 Dismantling asbestos cement (corrugated, semi-corrugated, etc) sheet in roof coverings complete all as specified & directed. 96 S&F pre-painted galvalume aluminium zinc coating corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified & directed. 97 S&F pre-painted galvatume aluminium zinc coating plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall/ridges etc, fixed with self tapping screws complete all as specified & directed. 98 Dismantling structural/framed steel work of any description as in purlin, rafter,grills, grating&doors etc. complete all as specified & directed. 99 S&F steel work in hollow structural pipes as in Steel fram worksspecial shaped washer including cleat and bolt complete using ERW or induction but welded tubes comprising to IS 4923 grade St -240 complete all as specified & directed. 100 M&L injecting chemical emulsion for Post Constructional Anti-termite TreatmentAlong the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron complete all as specified & directed. 101 Treatment of soil with ATT under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement :2 coarse sand) to match the existing floors soil complete all as specified & directed. 102 Treatment the soil with ATT under plinth protection at the rate of 5 litres of emultion per square meter of surfaces area complete all as specified & directed. 103 At the point ofcontract of wood work by with ATT chemical emultion ( in oil or kerosene based solution) @ 0.5 litre / hole by drilling 6mm diaholes at a downward angle of 45 degree at 150 mm centre to centre and sealing the same complete all as specified & directed. 104 Dismantling, floor, hearth or wall tiling including cement mortar bedding but not backing and removing rubbish off the premises complete all as specified & directed. 105 M&L for PCC 1:2:4 type B-1 (using 20mm graded stone agg)25 mm thick for Sub base flooring complete all as specified & directed. 106 M&L Non skid ceramic coloured tiles 9-10 mm thick (Square/rectangular) area of each tile exceeding 0.11Sqm but not exceeding 0.18 Sqm in floors set and jointed in neat cement slurry and pointed with whiteor colour cemnt to match including 15 mm thscreed ded in cm 1:6 complete all as specified & directed. 107 S&Fvitrified tile of7 to 8 mm (squre/ rectungular ) area of each tile exceeding not exceeding 0.38 sqm in floors set and jointed inneat cement slurry and pointed with whiteor coloured cement over 15mm screed bed in CM 1:6 complete all as specified and directed. 108 All as per item No 107.00 above but as in skirting over and including 10mm thick rendering in cement mortar 1:4 complete all as specified and directed. 109 S&F Coloured Glazed ceramic tiles in vertical surfaces 450x300x7mm thickset and jointed in neat cement slurry and pointed in white or coloured cement to match over 10mm thick plaster in CM(1:4)joint free with grout of matching shadecomplete all as specified & directed. 110 M&L machine pressed 60mm thickcoloured precast cement concrete interlocking paver block with pigment over sand cushioning, ineterlocking tiles jointd filled with sand complete all as specified & directed. 111 M&L Sand for cushioning, including spreading and levelling in layers n exc 25 mm thick complete all as specified & directed. 112 Excavating in post holes (or similar holes) each n exc 0.5 cum getting out, returning, filling in and ramming earth or broken rubble mixed with earth around in layer not exceeding 25 cm,soft lose soil complete all as specified & directed. 113 M/L cement concretein foundation feeling and massconcreate 1:2:4 type C-2 using (40 mm graded stone agg) complete all as specified & directed. 114 S&F Mild Steel angle iron posts and struts in fencing (angle of size 65x65x6) mm including cutting tops to shapes as directed including driling holes for bolting of MS flat iron in horizontal, vertical & diagonal faces of each panel to be intertwined with Chain link fencing, and fixed to posts with MS nut, bolts and washersincluding all necessary drilling bolting etc, andsimilar work confirming to Fe 290 Gde E-165 complete all as specified and directed. 115 Supply only Chain link mild steel galvanized fencing(IS-272) 100x100 mm mesh GI wire (Minimum dia 4mm and weight of mesh n.exc 4.0 kg/sqm) made up into mattress or cages etc complete all as specified and directed. 116 Fixing only chain link fencing weight n.exc 4.0 kg/sqm including line bars, any mesh, size and type to any type of standard, rails, straining bolts, etc. including provision of binding wire complete all as specified and directed. 117 S&F mild steel bolts. purpose made.with hexagonal orsquare head one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut. exc 10 cm but not exc 15 cm and 12mm dia complete all as specified and directed. 118 Supply only Mild steel bars 10mm dia round bar complete all as specified and directed. 119 M & L for preparation of new or previously untreated steel surfaces of any description, n.exc 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer when unconnected with other painting or when painted in a different tint complete all as specified and directed. 120 M&L for stainless steel basket size (15 inch X 20 inch X 4 inch) for modular kitchen cutlery tray/basket with complete sliding Arrangement fixed kitchen cabinet framecomplete all as specified and directed. 121 M&L for stainless steel basket size (15 inch X 20 inch X 6 inch) for modular kitchen tray/basket with complete sliding Arrangement fixed Kitchen cabinetframecomplete all as specified and directed. 122 M&L forstainless steel basket size (15 inch X 20 inch X 8 inch) for modular kitchen crockery tray / basket with complete sliding Arrangement fixed kitchen cabinet framecomplete all as specified and directed. 123 M&L for stainless steel basket size (15 inch X 20 inch X 10 inch) for modular kitchen grain troIIy basket with complete sliding arrangement fixed kitchen cabinetframecomplete all as specified and directed. 124 M&L for stainless steel basket size (15 inch X 20 inch X 4 inch) for modular kitchen tray / basket with complete sliding arrangement fixed kitchen cabinetframcomplete all as specified and directed. 125 S & F for Stainless steel wide 110 degree Hydraullic hing fixed with ss screw complete all as specified & directed. 126 Taking down carefully any type of battens or conduit point wiringwith conduit (light, fan, socket or power) complete including fittings and fixtures such as switches, sockets, ceiling roses, lamp holders, pendent light fittings, MCBs / isolators, fan regulators, tube light fittings etc removing material from site and making good disturbed surfaces of walls, ceilings etc including two coats of white / colour washing / distempering etc to match the existing complete all as directed by Engineer - in - Charge. 127 Material and labour for point wiringwith 1.5 Sq.mm nominal cross sectional area, single core, 1100 Volts grade, stranded, FRLS PVC insulated, unsheathed, copper conductor cable in and including PVC concealed conduit of any size/dia complete with all accessories/fittings, brass screws, washer etc, sunk zinc coated pressed steel terminal boxes with 3mm thick plastic laminated sheet top cover concealed in wall with and including continuous earth wire of size 1.5 Sqmm nominal cross sectional area, single core, PVC insulated stranded copper conductor cable, unsheathed and connected to common earth and earth duly complete all as specified and directed for the followings :- 128 One tube light/Bulb/ street light point controlled by one, one way switch 05 / 06 Amps complete all as specified & directed. 129 One fan / Exhaust fan point controlled by one, one way switch 05 / 06 Amps complete all as specified & directed. 130 One 3 pin, 05 / 06 Amps socket outlet point on independent board controlled by one, one way 05 / 06 Amps switch complete all as specified & directed. 131 One 3 pin, 05 / 06 Amps socket outlet point on same board controlled by one, one way 05 / 06 Amps switch complete all as specified & directed. 132 One Bellpoint controlled by one, one way switch 05 / 06 Amps complete all as specified & directed. 133 All as per serial item No 127.03 above but with 2.5 Sqmm nominal cross sectional area copper conductor cable for one 15 / 16 Amps socket outlet point on independent board complete all as specified & directed. 134 All as per serial item No 127.03 above but with 4 Sqmm nominal cross sectional area copper conductor cable for sheet metal enclosure 20 Amps AC Box complete all as specified & directed. 135 Supply and fixswitch piano flush type, 05 / 06 Amps single pole, one way 240 volts complete all as specified & directed. 136 Supply and fix insocket outlet 5 pin, 05 / 06 Amps flush type 240 volts complete all as specified & directed. 137 Supply & fixing of socket outlet 3 pin, 05 / 06 Amps and 3 pin 15 / 16 Amps (2 in 1 Multipurpose) 240 volts complete all as specified & directed. 138 Supply and fix inswitch piano flush type, 15 / 16 Amps single pole, one way 240 volts complete all as specified & directed. 139 Supply and fixing bell push flush type , 5 amps , 240 volts complete all as specified & directed. 140 Supply and fixing Bell,AC , 230 volts ,Single pole complete all as specified & directed. 141 Supply & fixing of ceiling rose, 3 phase/PVC/polycarbonate isolated body complete all as specified & directed. 142 Supply & fixing lamp holder (Angular / Straight), insulated body, with back plate complete all as specified & directed. 143 Supply and fixing LED lamp 2 pin 9 watt complete all as specified & directed. 144 Supply and fixing LED light fitting 1x20 watt,220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed. 145 Supply and fixing LED light fitting mirror type with high output diffuser 2 feet,10 watt 220V, AC decorative type with driver holder and LED lamp including connecting up withthree core flexible copeer conductor cable of suitable size complete all as specified and directed. 146 Supply and fixing 1x36/40W LED Building security lightenergy saving & environmental friendly long life luminaire with high power LEDs as light source and electronic driver including security light brackets of 32 mm dia GI pipe medium grade upto 1.2 mtr long bend to shape at 100-120 degree including flat iron clamps and Suitable nuts and bolts grouted in wall including all material required for fitting all as specified and directed. 147 S/F in repairs Fancy light cast Aluminum polyurethane paint(with prior Treatments)bracket with round base with LED Lamp 05 to 11 watts compete all as specified and directed. 148 S&FTPN DB, 4 way, 415 V, double door type suitable for mounting incoming and outgoing MCB’s double pole/single pole,complete all as specified and directed. 149 Supply & fixingfour pole Isolator ,415 V, 63A, and making connections complete all as specified & directed. 150 Supply and fixing MCB, SP, AC, 240 volts C curve capacity of 06 to 32 Amps, 10kA and making connections complete all as specified & directed. 151 S & F and grouting in wall sheet metal enclosure factory fabricated with single pole & neutral with a two pin and earth plug top and socket complete with one single pole MCB 20 Amps 240 volts complete all as specified & directed. 152 Material & labour for earthing complete with galvanised mild steel earth plate electrode 60cmx60cmx6mm thick buried directly in ground (earth pit not less than 2.25mtr deep below ground level) with top edge of the plate not less than 1.5mtr below normal ground level steel earth plate connected with GI wire 04mm dia by means oflug, bolts, nuts, check nuts, washers of galvanised iron or steel GI protection pipe 15mm bore light grade all as shown in elect plate No.3 of SSR part I connecting to main switch board / Main DB’s including excavation, earth work, salt and charcoal dust mixed and packed 150mm thick around GI earth plate, GI pipemedium grade 20mm nominal bore watering pipe GI sheet funnel wire mesh, concrete pit, RCC cover in PCC 1:2:4 type B1 duly reinforced with MS Bars 6mm dia at the rate of 150mm center to center both way with suitable lifting handle and pit / chamber in PCC 1:3:6 type C1 , Angle iron 40x40x5mm frame for pit cover including testing on completioncomplete all as specified and directed. 153 supply and fixing Exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, RPM 1200, copper winding of sweep 250mm complete all as specified & directed. 154 supply and fixing Exhaust fan steel body AC single phase 230V of size 300mm sweep with blades and frame and louvers complete all as specified & directed. 155 Supply and fixing fan ceiling complete with blades, down rods, electronic regualtor and accessories ,230V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE rated with Brushless direct current motor (BLDC) complete all as specified & directed. 156 Supply and fix electric water heater storage type steel body with and heating element upto 2 KW capacity 25 litre, 5 star rated complete all accessories such as safety valve, thermostate, NRV, connectio piece etc complete all as specified & directed. 157 Taking down existing ceiling fan of any size, CeiIing cable end,dismentalling blades ,makeone set ofthree blades and keep them safe to deposited to E/M yard complete all as specified & directed.
