Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | Taking down shutters of any description exc 1 sqm and n exc 2 sqm each and refixing in same opening complete all as specified and directed. |
| 2 | S&F 35mm thick plain, framed, factory made panelled shutter(two panel) with lock rail and panel of 9 mm B.W.P. commercial veneering particle board on both faces. The size of rail and stile as per IS : 1003(Part-1), kiln in seasoned and chemically pressure treatedall as specified and directed. |
| 3 | S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing. |
| 4 | S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing etc complete all as specified. |
| 5 | S&FStainless steel butt hinges 100mm long medium weight, cold rolled complete all as specified and directed. |
| 6 | S&F 150mm long Aluminium,anodized handle of extruded section and fixed complete all as specified and directed. |
| 7 | S&F 300mm aluminium alloy, anodised, sliding door bolt with hasp, staple bolt type and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy complete all as specified and directed. |
| 8 | S&F 150mm long Aluminium,anodized barrel tower bolts of extruded section and fixed complete all as specified and directed. |
| 9 | M&L Preparation of new wooden surfaces over 10cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed. |
| 10 | M&L Preparation of old wooden surfaces over 10cm width or girth, not otherwise described and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 11 | S&FStainless steel wire cloth, 0.36mm nominal dia of wire and average width of aparture 1.40 mm and fixed with stainless steel wire staples complete all as specified and directed. |
| 12 | S&F Aluminium louvers with levers and locking arrangement suitable for fixing 100mm wide 4 to 6 nos glass complete all as specified and directed. |
| 13 | S&F 4 mm thick sheet glass ordinary quality and glazing complete in square n exc 0.50sqm ineach pane complete all as specified and directed. |
| 14 | S&F 4 mm thick sheet glass ordinary quality and glazing complete in square exc 0.50 sqm in each pane complete all as specified and directed. |
| 15 | S&F 4mm thick frosted glass, ordinary quality and glazing with oil putty of any size complete all as specified and directed. |
| 16 | Demolition of reinforced cementconcrete ofany description and in any position not otherwise specifically provided forcomplete all as specified and directed. . |
| 17 | Providing precast cement concrete cover slabs type B1 1:2:4 (20mm graded aggregate) set in CM 1:6 (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces complete all as specified and directed. |
| 18 | M & L for Mild Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161 1979 grade St.-240 including all necessary nut, bolts, washers etc complete all as specified and as directed. |
| 19 | M&L for Pre-cast cement concrete block masonry, type C1 (1:3:6), (using 20mm graded crushed stone aggregate) with solid blocks, exc. 10 cm in width and setting in cement mortar (1:6), complete all as specified and as directed. |
| 20 | Excavation in post holes (or similar holes) each not exc. 0.50 Cum, getting out, returning, filling and ramming earth or broken rubble mixed with earth around in layers not exc. 25 cm watering and removing surplus soil to a distance not exc. 50 m and making good surface as in soft/loose soil complete all as specified and directed. |
| 21 | M & L Plain cement concrete type C-2 (1:3:6)using 40mm graded stone aggregate as in foundation filling and mass concretecomplete all as specified and directed. |
| 22 | S&F Pre-painted galvalume aluminium zinc coating ( AZ-150)GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed |
| 23 | M&L for applyingtwo coats of synthetic enemel paint over a coat of red oxide primer incl prepairaring new surface of steel complete all as specified and directed. |
| 24 | Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits,manholes, pier holes, etc. n exc 10 sq m on planand getting out inhard/dense soilcomplete all as specified and directed. |
| 25 | Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting pointcomplete all as specified and directed. |
| 26 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cmcomplete all as specified and directed. |
| 27 | M&L forPCC 1:4:8 type D2 using 40 mm graded stone aggregate as in foundation, filing and mass concrete complete all as specified and directed. |
| 28 | Formwork to sides and soffits ofrough finish surfaces of concrete floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beamsfair finished surfaces of concrete etc complete all as specified and directed. |
| 29 | M&L for RCC (nominal mix) Type B1 1:2:4 (using 20mm graded stone aggregate) as in Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed. |
| 30 | S&F MS TMT bars 10 mm dia and above , cut to length ,bent to shape required , including cranking , bending , spirally for hooping forcolumns , hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips as in reinforcement complete all as specified and directed. |
| 31 | S&F MS TMT bars 8 mm dia, cut to length ,bent to shape required , including cranking , bending , spirally for hooping forcolumns , hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips as in reinforcement complete all as specified and directed. |
| 32 | M&L 25mm thick Damp proof course in cement concrete 1:2:4 type B0 using 12.5mm graded stone aggregate to horizontal or vertical surfaces including necessary formworkcomplete all as specified and directed. |
| 33 | S&F SS Gd 304 sign board made with 40mm dia pipe and 25mm dia pipe all around board incl writing of matter as directed and ACP board of size 900x1200mm at a ht of 1.5mtr from GL fixed in grond with PCC 1:3:6 type C-2 40mm graded aggregate (300x300x450 mm) all as specified and directed. |
| 34 | S&F Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixedcomplete all as specified and directed. |
| 35 | S&F 22-25mm dia SS curtain rod and thickness 0.5 to 1mmincl SS brackets any type, holder fixed into brick/stone wall with screw,plugs etc all as specified and directed. |
| 36 | S & F SS Expansion anchor bolt with closed hook having length 15cm and dia 10mm having length adjustment bolt for fixing mosquito net into brick/ stone wall by use of mechanical means all as specified and directed. |
| 37 | S&F Plain mild steel wire of dia 4mm, galvanised class 3, including straining and fixing to wood, concrete or steel posts and/or to straining bolts, including securing with and provision of galvanised iron tying wire, galvanised iron staples or steel pins, etc.in detached work such as for mosquito nets and fixing to straining bolts, hooks, eyes, etc.complete all as specified and directed. |
| 38 | S&F in repair stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aparture 1.40 mm and fixed with stainless steel wire staples /wooden beadingcomplete all as specified and directed. |
| 39 | S&F for 8 feet 4 pipespulley operated cloths drying system consisting of aluminium pipe of outer dia 22mm, inner dia 19.80mm,made up of detrin with rope guide mounted on channel pair of lemgth 24 feet (distance between two pipes is adjustable) locking system to hide rope knot, channel to be mounted or fixed with self taping screws provided in kit. Rope will be HDPE double core of 4mm dia fixing to ceiling as specified and directed and minimum weight of one pipe shall not be less than 0.20kg/mtr, minimum weight of rope shall not be less than 7700Gms/unitMAKE : Easydry or equivalent. |
| 40 | Surface excavation (not exceeding) 30 cm deep and averaging 15cm deep and getting out in hard dense soil complete all as specified and directed. |
| 41 | M&L 75 mm thick, PCC 1:3:6, type C-1 using 20mm graded stone agg finished even and smooth without using extra cement complete all as specified and directed. |
| 42 | M&L 40 mm thick, Cement concrete 1:2:4,type B-1 using 20 mm graded stone aggregate as in pavings, hardstandings and similar work surface finshined even and fair without using extra cement complete all as specified and directed. |
| 43 | M & L for Hardcore of Broken stone/boulders gauge n exc. 63mm, deposited, spread & levelled in layers n exc. 15 cm thick, watered & rammed to a true surface complete all as specified and directed. |
| 44 | M&L Chequered cement concrete tiles 30cm x 30cm x 25mm thick with white cement and pigments, set, jointed and pointed in neat cement slurry in floors over & incl 15mm thick screed bed in CM 1:6 colour and design as approved by Engr-In-Charge complete all as specified and directed. |
| 45 | Keyed pointing to random or polygonal rubble, uncoursed or brought upto course in CM 1:4 complete all as specified and directed. |
| 46 | Demolition of wall stone/brick masonry built in cement mortor including all quoins, arches, pillars etc, complete all as specified and directed. |
| 47 | Taking down cement or cement lime plaster, any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed. |
| 48 | M&L 15 mm thick cement plaster in CM 1:4 on external surfaces on brick or concrete, surfaces finished even and smooth without extra cementcomplete all as specified and directed. |
| 49 | M&L 10 mm thickcement plaster in CM 1:6 on internal surfaces on brick or concrete surfaces finished even and smooth without extra cement complete all as specified and directed. |
| 50 | M&L 5 mm thick cement plaster in CM 1:3 on ceiling surfaces finished even and smooth without extra cement complete all as specified and directed. |
| 51 | M&L Providing and applying wall care putty of 1mm thickness over plastered surface to prepare the surface even and smooth. |
| 52 | Supply only integralwater proofing compound of approved make ISI marked |
| 53 | M & L for preparation of newly plastered surfaces or previously untreated surfaces of ceiling and applying three coats of white wash on ceiling, complete all as specified and directed. |
| 54 | M & L forPreparation of old plastered surfaces and applying three coat of white wash on ceilings incl complete removal of existing treatment, complete all as specified and directed. |
| 55 | M & L for Complete removal of existing treatment from wall etccomplete all as specified and directed. |
| 56 | M & L for preparation of newly/putty applied plastered surface and applying two coats ofoil bound distemper (OBD) over a coat of primer complete all as specified and directed. |
| 57 | Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new/old surfaces. |
| 58 | M&L for galvanised steel tubing 15mm bore of medium grade with all fittings open or concealed fixed complete to walls and ceilings or laid in floors incl taking down old rusted pipe complete all as specified and directed. |
| 59 | M&L for galvanised steel tubing 20mm bore of medium grade with all fittings fixed complete to walls and ceilings or laid in floors incl taking down old rusted pipe complete all as specified and directed. |
| 60 | M&L in repair PVC Floor trap long neck 100 mm dia, with stainless steel grating including jointing to waste pipe fixed in cement concrete type B1, 1:2:4 matching to the existing finishing complete all asspecified and directed . |
| 61 | S&F in repair 150mm size (Overall length of cover plate) floor door stopper of aluminium alloy body and tongue, anodized with hard drawn steel spring, fixed in floor complete all as specified and directed. |
| 62 | S&F sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mmcomplete all as specified and directed. |
| 63 | S&F in repair 15mm bib taps, fancy type chromium platedwith crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed. |
| 64 | S&F in repair 15 mm bore Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with long screwed shanks and fly-nuts, screwed for iron pipe and fixedcomplete all as specified and directed. |
| 65 | S&F in repair 15mm angle cock with flange, cast copper alloy, chorminium plated, fancy type, screwed both ends for iron pipe or for union complete all as specified and directed. |
| 66 | S&F in repair Wash hand basin flat back 550x400mm vitreous china (white) with cantilever CI/Angle iron brackets embedded in concrete block including Brass chromium plated waste coupling 32mm bore, Waste pipe PVC 32mm bore, complete all as specified and directed. |
| 67 | S&F in repair vitreous china wash down water closet pan padestel pattern white including connection pipe to union of flushing cistern, seat and cover for pedestal pan, inlet and overflow pipes,connecting only to flushing cistern anti-syphonage pipe with PVC flush pipe of 32mm diawith mild steel chromoum plated hinging and \"P\" or \"S\" trap devicecomplete all as specified and directed. |
| 68 | S&F in repair 10litre capacity PVC , syphonic action type, flushing cistern, low level, white, with inlet, ball valve,pvc flush pipe, float and handle incl brackets and waste pipecomplete all as specified and directed. |
| 69 | S&F 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed |
| 70 | S&F half stall Vitreous China urinals, bowl type (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe)complete all as specified and directed. |
| 71 | M&L for Urinal spreader of CP for fixing with 15 mm dia pipecomplete all as specified and directed. |
| 72 | S&F in repair 110mm borePVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in fixed to walls etccomplete all as specified and directed. |
| 73 | S&F in repair 110mm borePVC (SWR) bends any radius. |
| 74 | S&F in repair 110mm borePVC (SWR) junction single, (single T) equal or unequal any radius. |
| 75 | S&F in repair 110mm borePVC (SWR) junction double, (double T) equal or unequal any radius. |
| 76 | S&F in repair 110mm borePVC (SWR) cowl of any radius all as specified and directed. |
| 77 | S&F in repair PVC (SWR) pipe inner dia 75mm single socketed in any length with rubber ring joint laid on wall/ceiling or laying in floors complete all as specified and as directed |
| 78 | S&F in repair for 75 mm dia PVC (SWR ) bends and radius complete all as specified. |
| 79 | S&F in repair waste coupling 32 mmbore brass chromium plated for glazed ware sinks, basins etc.with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed |
| 80 | S&F in repair PVC connections 15 mm size with brass nuts both side of length 450 mm complete all as specified and directed . |
| 81 | S&F in repair PTMT cabinet with mirror of size 555x450x124mm complete all as all as specified and directed. |
| 82 | S&F in repairbrass chromium plated towel rail 20mm dia, D type, 60cm long between flanges fixed with CP brass screwsincluding wooden/plastic beads complete all as specified and directed. |
| 83 | S&F in repair 1000 ltr capacity Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I incl PTMT float valve of 20mm diacomplete all as specified and directed. |
| 84 | S&F in repair 20mm bore gunmetal gate valve with iron wheel head screwed both ends for GI out let/inlet pipe or for union including threading to existing pipes on both ends complete all as specified and directed. |
| 85 | S&F in repair Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm longall as specified and directed. |
| 86 | M&L Granite slab 18-20mm thick as in cill and similar works over & including 10mm thickscreed/backing coat in CM 1:3, machine cut, bedded and jointed with grey cement slurry and pointed with white cement and pigment to match incl cutting,rounding of edges, polishing complete all as specified and directed. |
| 87 | S&F Non Skid coloured ceramic tiles7 to 8mm thick (squares/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm,in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over & incl 20mm thick screed in CM(1:6) incl dismantling old tiles and rubbish off the premises complete all as specified and directed. |
| 88 | S&F Coloured Glazed ceramic tiles in vertical surfaces350x250mmx7mm/450x 350x7mm thickset and jointed in neat cement slurry and pointed in white or coloured cement to match over & incl 15mm thick backing coat in CM(1:4) on fair face of brick or concrete surface including dismantling old tiles and rubbish off the permises complete all as specified and directed. |
| 89 | Complete removal of existing water proofing treatment of any description and in any position including PCC padding any thickness and cleaning, wire brushing, watering & removal of debris outside MOD.NOTE :- Unit rate quoted shall also include for removal of PVC water storage tank wherever existing carefully and refixing at the same or other position after completion of roof repairair work |
| 90 | M&L Cutting out cracks to V-section in existing roofs or terracing, cleaning out and filling solidly with a hot mixture of bitumen and clean dry sand 1:1 (by weight)all as specified and directed. |
| 91 | Roughening surfaces of old concrete floors by picking, sweeping clean and washing down with waters to remove dusts etc.complete all as specified and directed. |
| 92 | M&L for Brushing neat cement slurry with 3kg/sqmcomplete all as specified and directed. |
| 93 | M&L PCC 1:2:4 type B0 using 12.5 mm graded stone aggregate as in concrete padding laid to required slope incl finishing the concrete surface fair and even without using extra cement complete all as specified and as directed. |
| 94 | M & L for 10 mm thick rendering in cement mortar (1:4) on roof surfacesfinished with WPC as per manufacturer\"s instructions, complete all as specified and directed NOTE :-Integral WPC shall be measured and paid separately. |
| 95 | Apply oil bound bitumen primer @ 0.40 Litre / Sqm manufactured by the same agency as that of APP with density of 0.87 to 0.89 Kg / Litre at 25 degree Celsius on the prepairared dry roof surfacecomplete all as specified and directed. |
| 96 | M&L APP polymeric membrane min weighting 3.5kg/sqm and minimum 3mm thick reinforced with polyster non woven fabric(wt not less than 150 gms/sqm laid on primed surfaces by torch application method all as specified. |
| 97 | M&L for preparation of new surfaces of any description not otherwise described over 10cm width or girth and applying one coats of solar reflective aluminium paint @ 0.10 kg/sqm membrane surfacescomplete all as specified and directed. |
| 98 | M&L Precast cement concrete type B1 (1:2:4) using 20 mm graded aggregate in window or door cills, lintels, bressumers, steps, quoin blocks (for use with masonry), string courses, copings, kneelers, apex stones, pier caps, columns, hold fast, posts, boundary pillars, bed plates, pintle blocks, anchorage blocks, bonders (for stone walling), corbels, brackets, etc.(of any section indicated), with plain fair faces, including chamfers, weathering’s, throttling etc. and setting in CM(1:4) with joints to match. Complete all as specified and directed.” |
| 99 | Taking down chowkats or frames including shutter (without taking off shutters from the frame) area n exc. 1.5 Sqm each complete all as specified and directed. |
| 100 | All as per item No. 99above but exc 1.50 Sqm n.exc 4 Sqm each all as specified and directed. |
| 101 | Providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixedportions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, complete all as per architectural drawings and the directions of Engineer-in-Charge. |
| 102 | S&F Providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws,star lock, rubber beading all complete as per architectural drawings and the directions of Engineer-in-Charge. |
| 103 | S&F Aluminium powder coated grill (anodised transparent or dyed to required shade according to IS:1868 with minimum anodic coating of grade AC15) of approved design/pattern(DG 104), with approved standard section and fixed to existing window frame with CP brass/stainles steel screw not less than 50mm and @ 200mm c/c, incl cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section ( 28mm x 19mm x 2mm thick)around the opening,complete all as per requirement and direction of EIC. |
| 104 | M&L Silicon gun paste around windows of any type at any height of the building by using scaffolding complete all as specified and as directed. |
| 105 | M&L Boring holes through stone/tile lining for pipes, etc. n exc 50 mm dia and making good complete all as specified and directed. |
| 106 | M & L Virified Ceramic tiles 8-10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over & including 10mm thick screed bed in CM 1:6 to recieve tiles incl dismantling old tiles and rubbish off the premises complete all as specified and directed. |
| 107 | M & L Virified Ceramic tiles 8-10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and over & including 10mm thick backing coat in CM 1:4 to recieve tiles incl dismantling old tiles and rubbish off the premises complete all as specified and directed. |
| 108 | Material and labourfor machine cut cudappa stone slab 20-25 mm thick in perairs over cement screed bed laid and jointed with grey cement slurry mixed with pigment to match to shade of slab including rubbing and polishingand 15 mm thick screed in cement mortar 1:4 complete all as specified complete |
| 109 | M&L for rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situationscomplete all as specified and directed. |
| 110 | M&L for preparation of old surfaces of steel or iron surfaces of any description, over 10 cm width or girth, not otherwise described and applying one coat of synthetic enamel paintcomplete all as specified and directed. |
| 111 | Taking down carefully copper/aluminum pointwiring(light, fan,Power) completefittings such as switches , ceiling roses pendents , regulatorssocketslight fittingsetcand making good disturbed surface of wall, floors , roofetc all as specified and directed. |
| 112 | M & L for Point wiring with PVC insulated FRLS 1.5 sq mm multi stranded copper conductor cable 1100 Volts grade drawn into and including rigid non metalic PVC conduit/casing caping medium grade not less than 19/20 mm ( ISI marked ) with all fitting and fixing accessories including sunk in pressed steel chromium plated terminal boxes, concealed in wall/surface/roofs/floor/ceiling etc as per site requirement and making & matching the existing surface ) white bakelite sheet cover for mounting switches, Sockets, Fan regulators etc or modular cover plate with frame including sunken boxes suitableto fix modular cover plate with frame, concealed in wall and 1.5 sq mm multi stranded copper conductor FRLS cable as continuous earth wire drawn with wiring and connected to common earth dolly complete all as specified and directed for one light point controlled by one switch :- Make of wire: Polycab/Plaza/HavellsNote:Blanking plate,Modular cover plate ,Switches, sockets outlets, Light fittngs, fans, bells & regulators shall be measured and paid for separetely). |
| 113 | All as per item No 112 but for One ceiling fan point controlled by one switch one way 5 Amps and fan speed regulator |
| 114 | All as per item No 112 but for One Exhaust/wall fan point controlled by one switch one way 5 Amps |
| 115 | All as per item No. 112 here -in - before but for One 2/3 pin switch socket point controlled by 5 Amps switch on Independent board. |
| 116 | All as per item No 112 but forOne socket out let 5 Amps 3 pin on same board. |
| 117 | All as per item No. 112 here -in - before but for One 5 pin switch socket outlet combination, 5/15 Amps, with cables 4 sq mm complete all as specified and directed. |
| 118 | Supply and Fixmodular switch1 way 6 Amp.1 module, complete all as specified and directed.Make : Legrand/ Crabtree/ Anchor/Indoasian |
| 119 | Supply and fix Modular switch 1 way 16A, 1 module with indicator all as specified and directed .Make : Legrand/ Crabtree/ Anchor/Indoasian |
| 120 | S & F Modular socket 6 A, - 2/3 pin combined 2 module all as specified and directed. Make : Legrand/ Crabtree/ Anchor/Indoasian |
| 121 | Supply and fix ModularSocket 6/16A, twomodule all as specified and directed. Make : Legrand/ Crabtree/ Anchor/Indoasian |
| 122 | S & F modular White cover plate with frame, 1 module |
| 123 | S & F modular White cover plate with frame, 2 module |
| 124 | S & F modular White cover plate with frame, 3 module |
| 125 | S & F modular White cover plate with frame, 4 module |
| 126 | S & F modular White cover plate with frame, 6 module |
| 127 | S&F Modular fan regulator 120W, 2 Module for ceiling fan complete all as specified and directed. |
| 128 | Supply and fixof ceiling rose, surface bakelite type, PVC/ polycorbonate isolated body with three terminals all as specified and as directed. |
| 129 | M&L for Sub main wiring with PVC insulated unsheathedFRLS cable 1100 volts grade multi stranded copper conductor cable 2 runs of 4 Sqmm drawn through in and incl suitable sizesurface PVC Conduit/ existing concealed conduit and all accessories fixed to wall/floors along with 4 Sqmm PVC insulated unsheathed copper conductor multi stranded cable 1100V grade as earth continuity conductor and connected to common earth dolly including taking down existing sub main wiring of any size and descriptioncomplete all as specified and directed.Note: (a)2 runs of 4 Sqmm cable along with onerun of 4 Sqmm cable for earth conductor shall be measured as one length.Make:- Havells/ Polycab/ Plaza. |
| 130 | M&L cutting of grove channel of stone masonary wall with the help of grove cutting machine for point/sub main wiring suitable for 25 mm dia conduit and prepairaring surface to make goodmatching with existing surface coloured complete all as specified and directed. |
| 131 | S&F factory madepowder coated distribution board TPN 6 way double door,includingbus bar, Neutral bar, standard DIN rail, earth bar complete including taking down unserviceable DBall as specified and directed. Make : Legrand/ Havells/ Indo Asian |
| 132 | S & F MCB TPN 415 volts 63 Amps complete including taking down unserviceable fitting complete all as specified and as directed .Make : Legrand/ Havells/ Indo Asian |
| 133 | S & F of MCB single pole 240 volts 6 to 32 Amps complete including taking down unserviceable fitting complete all as specified and as directed .Make : Legrand/ Havells/ Indo Asian |
| 134 | Supply and Fixing of 4 feet surface mounted batten type luminaire , lumen output of 2000 lumens, high efficiency long life LED package in integral module with lumen efficacy of >100 lm/w, viewing angle not less than 120° to ensure better uniformity with an operating voltage range from 140V-270V. The luminaire shall have a white extrusion housing with a poly carbonate diffuser to provide uniform light and sleek design with width not more than 22 mm. The luminaire shall have a CRI >80, Color temperature 6500K, THD <10% and PF >0.95,SDCM<5, IP20, IK02, Operating Temperature: -10 TO + 45 DEG.C; Input Supply Voltage Range:140-270 V, Frequency :50-55 HZ. The luminaire shall have flicker content<5% and shall have high and low cut off with auto restart feature.Driver Safety requirement stds: IS 15885-2-13. The luminaire shall be EMI/ EMC compliant and shall have a internal surge protection of 4 KV. The luminaire shall have Class-1 Electrical insulation, Class-B serviceability .The luminaire and driver shall be BIS approved, complete all as specified and directed.Make : Philips/ Bajaj / CG/Havells. |
| 135 | Supply and Fixing of 2 feet surface mounted batten type luminaire , lumen output of 1000 lumens, high efficiency long life LED package in integral module with lumen efficacy of >100 lm/w, viewing angle not less than 120° to ensure better uniformity with an operating voltage range from 140V-270V. The luminaire shall have a white extrusion housing with a poly carbonate diffuser to provide uniform light and sleek design with width not more than 22 mm. The luminaire shall have a CRI >80 , Color temperature 6500K, THD <10% and PF >0.95,SDCM<5, IP20, IK02, Operating Temperature: -10 TO + 45 DEG.C; Input Supply Voltage Range:140-270 V, Frequency :50-55 HZ. The luminaire shall have flicker content<5% and shall have high and low cut off with auto restart feature.Driver Safety requirement stds: IS 15885-2-13. The luminaire shall be EMI/ EMC compliant and shall have a internal surge protection of 4 KV. The luminaire shall have Class-1 Electrical insulation, Class-B serviceability .The luminaire and driver shall be BIS approved, complete all as specified and directed.Make : Philips/ Bajaj / CG/Havells. |
| 136 | Supply and fixingbuilding security/ LED street light fitting 35/36 Watt, 230 V AC outdoor type with high pressure die cast aluminium housing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal, management in multiple optics complete, with IP 65/66 protection complete all as specified and directed. Make: Philips/Bajaj/CG |
| 137 | Supply and fix GI pipe 32 mm dia, medium grade for mounting bracket, bent to shape 1.5 meter length and fixing arrangement with two Nos ofclamps set, nut, bolts, washers, andincl taking down old unserviceable GI pipe bracket complete all as specified and directed |
| 138 | Supply and fixing in replacement of unserviceableCeiling fan 1200mm sweep, energy efficient ISI marked withstar rating 230 Volts AC 50 Hz, single phase including provision of fixing arrangement, nut and bolt andflexible copper cable 3 core of size 1.5 sqmm not less than 0.5 m long complete including taking down existing one, writing MES No with synthetic enamel paint complete all as specified and directed. Make : Havells/ Bajaj/ OrientNote:-(a)Old Unserviceable ceiling fan shall be deposited to MES store yard by the contractor. |
| 139 | Supply and fixingExhaust fan 300 mm sweep 230/ 240 volt AC single phase Metal body 1400 RPM including necessary nut, bolts / screws including taking down existing one writing MES No with synthetic enamel paint all as specified and directed. Make-Havells /Bajaj/ Crompton GreavesNote:-Old Unserviceable Exhaust fan shall be deposited to MES store yard by the contractor. |
| 140 | M&L cutting of core cutting of stone masonary wall of size 40/50 mm size with the help of core cutting machine forwiring and prepairaring surface to make goodmatching with existing surface coloured complete all as specified and directed. |
| 141 | M&L cutting of core cutting of bricks masonary wall of size 40/50 mm size with the help of core cutting machine forwiring and prepairaring surface to make goodmatching with existing surface coloured complete all as specified and directed. |
| 142 | Excavating in trenches not exceeding 1.5m wide and not exceeding 1.5m in depth for laying of cable, foundation etc, and getting out in soft /loose soil complete all as pecified and directed. |
| 143 | Material and Labour for Spreading ribbed soil in trenches as in cable cushioning all as per IS 1255-1983and as directed. Note :- (i)Excavated approved soil shall be ribbed by using sieve to separate composite particles etc as per IS and refilling in trenches before laying of cable 8 CM and 15 CM after laying of cable. This is then gently punned down to a depth of 10 cm above the top of upper most cable(ii) For the purpose of measurement only punned thickness shall be considered for payment. |
| 144 | Material and labour for Cutting existing road/PCC/Drain for laying of GI or any type of pipe including necessary earthwork, excavation exc 600mm depth but not exc 1mtr depth, 800 mm wide including making good existing surface with 150 mm thick PCC 1:2:4 type B1 using 20mm graded stone aggregate, complete all as specified and directed. Note :-The tenderer shall take into consideration for following points while quoting rate for this item andthe unit rate is deemed to be inclusive for :-(i) Earth work and excavation in any type of soil(ii) Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc. 25 cm thick ,complete all as specified and as directed.(iii) Removing excavated material to out side MD land.(iv)Laying of any type/any bore of pipe in trenches including taking down. Supply of pipe shall be measured and paid separately(v)150 mm thickPCC 1:2:4 type B1 using 20mm graded stone aggregate as inroad to make good existing disturbed surfaces. |
| 145 | Material and Labour for well burnt subclass ‘B’ bricks as mechanicalprotection forunder ground LT electric cables laidalong with length of the bricks equal to the width of the trench complete all as speified and directed . |
| 146 | Material and labour forBoring of holes under road, pavement, hard standings by trenchless technology using ultra sound technique and necessary machine including HDPE pipes upto 100 mm dia suitable for 0.4 Mpa working pressure, complete all as specified and directed. |
| 147 | Supply and Fixing GI tubing light grade 50 mm dia fixed on walls/pole/ laid in trenches as protection pipe for under ground cable including provisioning of specials and clamps etc complete all as speified and directed. |
| 148 | Material and labour in repair for 3.5 core 25 Sqmm XLPE insulated heavy duty electric cable with aluminium multi stranded conductor 1100 volts grade served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall sheathed laying in trenches/cable ducts, fixed to wall/pole, complete all as specified and directed. Make : Havells/ Polycab/ RPG AsianNote - Earthwork and bricks to be measured and paid separately in respective items. |
| 149 | Material and labour for 3.5 core 35 Sqmm XLPE insulated heavy duty electric cable with aluminium multi stranded conductor 1100 volts grade served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall sheathed laying in trenches/cable ducts, fixed to wall/pole, complete all as specified and directed.Make : Havells/ Polycab/ RPG Asian |
| 150 | M&L for Sub main wiring with PVC insulated unsheathedFRLS cable 1100 volts grade multi stranded copper conductor cable 2 runs of 1.5 Sqmm drawn through in and incl suitable sizesurface PVC Conduit/ existing concealed conduit and all accessories fixed to wall/floors along with 1.5 Sqmm PVC insulated unsheathed copper conductor multi stranded cable 1100V grade as earth continuity conductor and connected to common earth dollycomplete all as specified and directed.Note: (a)2 runs of 1.5 Sqmm cable along with onerun of 1.5 Sqmm cable for earth conductor shall be measured as one length.Make:- Havells/ Polycab/ Plaza. |
| 151 | Supply, install,commissioning and testing of commercial Air curtain unit with automatic operation for prevention of dust and conditioned air losses, three phase 230 V,50 Hz, made out of MS/CRCA sheetfinished with powder coated square perforatedsuction grills,Aluminium alloy fans and single phase electric motor,nozzles etc,complete with fittings and accessories so as to produce 18 m/sec air velocity at floor level for door opening as 5 ftcomplete all as specified and directed. |
| 152 | M&L for Sub main wiring with PVC insulated unsheathedFRLS cable 1100 volts grade multi stranded copper conductor cable 2 runs of 4 Sqmm drawn through in and incl suitable sizesurface PVC Conduit/ existing concealed conduit and all accessories fixed to wall/floors along with 4 Sqmm PVC insulated unsheathed copper conductor multi stranded cable 1100V grade as earth continuity conductor and connected to common earth dolly complete all as specified and directed.Note: (a)2 runs of 4 Sqmm cable along with onerun of 4 Sqmm cable for earth conductor shall be measured as one length.Make:- Havells/ Polycab/ Plaza. |
| 153 | S&F in replacement distribution board MCCB four pole, 100 Amp ultimate breaking capacity 16 KAconforming to IEC -61439-1, complete all as specified and directed. Make : Legrand/ Havells/ Indo Asian |
| 154 | S&F in repairlacementfactory madepowder coated distribution board VTPN, 6 way double doorMCCB DB includingbus bar, Neutral bar, standard DIN rail, earth barcomplete all as specified and directed.Make : Indoasian/Havells/ Legrand. |
| 155 | Supply and fixing 415 V, 10 KA \"C\" curve MCB of TPcurrent carrying capacity32 Amp,Complete all as specified and directed.Make : Legrand/ Havells/ Indo Asian |
| 156 | Supply and fixing 240V, 10 KA \"C\" curve miniature circuit breaker (MCB) of single poles and current carrying capacity25-32 Amp Complete all as specified and directed.Make : Legrand/ Havells/ Indo Asian |
| 157 | S & F LED light fittingtwo nos of 1x9W/1X10W wall lightluminaires(Red Light and green ) including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size Make : Philips/ Bajaj/CG/Havells. |
| 158 | S&F Metal clad socket Single pole and earth encolsure with a three pin and earth plug withsocket complete with one SP MCB 10 KA 20 Amps and 240 volts MCB Complete all as specified and directed Make - Legrand / Indo Asian/ Havells |
| 159 | M&L for Sub main wiring with PVC insulated unsheathedFRLS cable 1100 volts grade multi stranded copper conductor cable 4 runs of 4 Sqmm drawn through in and incl suitable sizesurface PVC Conduit/ existing concealed conduit and all accessories fixed to wall/floors along with 4 Sqmm PVC insulated unsheathed copper conductor multi stranded cable 1100V grade as earth continuity conductor and connected to common earth dolly complete all as specified and directed.Note: (a)4 runs of 4 Sqmm cable along with onerun of 4 Sqmm cable for earth conductor shall be measured as one length.Make:- Havells/ Polycab/ Plaza. |
| 160 | M&L cutting of grove channel of bricks masonary wall with the help of grove cutting machine for point/sub main wiring suitable for 25 mm dia conduit and prepairaring surface to make goodmatching with existing surface coloured complete all as specified and directed. |
| 161 | Supply, installation, testing & commissioning of maintenance free chemicalearthing system comprising of 17mm dia copper bondedrod 3 mtr long horizontally pre welded T-terminal rod with provision for connection size of 50 x 150mm long, 6mm thickness with equal space either side, with 12mm dia hole of 02 numbers each on either side of the terminal clamp with 250 microns (average) coating thickness, tested and certified by CPRI India alongwith 50 Kg earth energizer compound and 10 litres earth resistance reducingliquid. The earthing energizer compound and resistance reducing earthing liquid shall be tested as per IEC-62561-7 read with ASTM G57-06, CI 3.4 A by any NABL accredited lab. The above mentioned rod shall be installed in 4-6 inch bore, 12 feet depth with a distance of minimum 3 meters between each installation including taking down existing one, complete all as specified and directed..Make : Model HTSP 317 of safeTrode or equivalent in Snaga/ Cubes 6 Global |
| 162 | The quoted rate shall also deemed to be included the following :- (i)Prior toinstallation of maintenance free chemicalearthing, soil resistivity test to be carried out at the location where earthingwork to be donein presence of Engr-in- Charge/JE (E/M),user and the report has tosubmitto Garrison Engineer with recommendation of manufacturer, if required additional interconnection ofearthing (not more than 08 number of earthing) to achive earth result less then 1 Ohms. The arrangement done for soil resistivity testingandsubmission of report with recommendationdeemed to be included in the quoted rate. |
| 163 | (ii) The description/ size/ qty of items mentioned in above are for indicating only however qty/ size may vary at site condition to maintain the earth resistance 1 ohm. The contractor shall quote rate by considering all factors. |
| 164 | (iii) Rateofearth energizer compound of 25 Kg of 02 bags and earthresistance reducingliquid 10 litre per cane for each pit deemed to be included in the quoted rate. |
| 165 | (iv)Resistivity of earth energizer compound and resistance reducing earthing liquid shall be certified by any NABL accredited lab carried out as per IEC-62561-7 read with ASTMG57-06, CI-3.4A and the certificate of same shall be submitted by the contractor along with the sample approval |
| 166 | (v) Earth enhancing material should not leach into the adjacent soil or underground water channels and its PH value should be in neutral range complete all as specified and as directed. It should solidify when mixed with water and set like concrete. |
| 167 | (vi) Copper strip of size 20 x 3 mm shallbe fixed on proper post insulator at the instrument end (copper strip upto 7.5 RM shall be considered in unit quoted rate and extra will be measured and paid separately). |
| 168 | (vii)Testing of earth shall be carriedout in presence ofdepartmental and user representativeand report shall be submitted to Garrison Engineer duly signed by all concerned. |
| 169 | (viii)Earth resistance tester will be provided by the contractor.Tester should be calibrated from authorised company/ lab. |
| 170 | (ix)Earthing shall be tested after completion of work by the contractor in presence of Engr-in-charge, user and proper record shall be maintained duly signed by all concerned.After testing if the desired earth resistance of less than 1 Ohm is not obtained, the earthing will be redone at no extra cost to Govt. till desired result is obtained. |
| 171 | (x) The contractor shall give a written guarantee of minimum three years for maintaining the earth resistance less than 1 Ohm after certified date of completion. |
| 172 | (xi) No further maintenance or periodic watering or recharge shall be required in earthing during its guarantee period of over 03 years in all type of soil including soft/ disintegrated or hard rock. |
| 173 | (xii) During the guarantee period, if earth resistance is not maintained less than 1 ohm the contractor has to redo or rectify at no extra cost to Govt till desired result is maintained. |
| 174 | (xiii) A security deposit of value equal to 2.5 % of the rate quoted for chemical earthing for each earthing shall be retained from payment due to the contractor from final bill for the guarantee period. |
| 175 | (xiv) The electrode shallcarry manufacturer\"s name . |
| 176 | (xv) The connection clamp shall be permanentlly welded to the copper boundedrodto avoid any kind of connectivity loss,.The pre-welded copper bounded rod shall not need any additional clamp for termination. |
| 177 | (xvi) The acceptable earth resistance at earth busbar/ test point shall not be more than 0.1 ohm. |
| 178 | (xvii)Earth work such as auguring andmaking good the surrounding area shall carried out in any type of soil. |
| 179 | (xviii)The contractor shall submit CPRI India certified document for copper bounded rod to ensure genuineness of material. |
| 180 | (xix) Sign boardof mild steel sheet 2 mm thick duly painted with two coats of synthetic enamel paint over a coat of red oxideZinc chrome primer showing result of earthing shall be fixed near the earth pit after completion as directed by engr -in- charge. |
| 181 | Earth pit cover madeof heavy duty poly plastic of high grade polypropylene tested and certified by any NABL accredited lab for load bearing capacity not less than 7.2 tonnes with top dia not less than 250mm, bottom dia not less than 330 mm and height not less than 260 mmfor each electrode pit, including taking down, complete all as specified and directed. |
| 182 | S&F in repair copper strip 20 x 3mm thick as earthing lead fixed to wall/roofs etc including taking down existing old unserviceable copper strip of any description, complete all as specified anddirected. Note : - All Joints should be joined by Exothermic Welding or Brazing. |
| 183 | Roughening surfaces of old concrete/cement floor&wall by picking, sweeping clean and washing down with water to remove dust, etc. complete all as specified and directed. |
| 184 | Material and labourfor glazed ceramic designer coloured tiles of size 300 X 450 X 7 mm thick as in vertical surface such asskirting / dado, set, jointed in neat cement slurry and pointed in white cement using pigment to match color of tilesincl 10 mm thick plaster in CM 1:3 complete all as specified & directed |
| 185 | S&F Wash basin viterous china (flat back and angle back type) size 580x400mm including taps wastechain and plug and porceline stopper but brackets including cutting for and pinning inends of brackets or erecting stand with waste pipe, fixed complete all as specified and directed. |
| 186 | S&F15 mm bore Pillar taps,fancy type cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, screwed for iron pipe complete as directed. |
| 187 | S&Fstop/angle valves chromium plated cast copper screwed down high pressure fancy type screwed both ends for pipe or union fixed for 15mm borecomplete all as specified and directed. |
| 188 | Supply and fixing PVC flexibleWaste pipe 32mm diacomplete all as specified and directed. |
| 189 | S&F 20 mm diaCPVC pipes SDR 11 & plain CPVC SDR 11 fittings and brass bends on walls / ceiling or laying in floors complete all as specified. |
| 190 | S&F in Bib taps chromium plated 15 mm dia fancy type with capstan head handle screwed down screwedhigh pressure with crutch or butterfly handle ,screwed both ends for iron pipe or for unions complete all as specified and directed. |
| 191 | S&F in 50mm bore unplasticised PVC pipe of pressure rating 10 kg/Sqcm fixed complete to walls, ceiling or laid in floors complete all as specified and directed. |
| 192 | M/L Preparation of new plastered surfaces and applying three coats of white wash on wallscomplete all as specified and directed. |
| 193 | S&FHydraulically regulated opening door closer universal type designation No 3aluminium of extruded section (ISI Marked)of weight not more than 80 kg suitable of any size for glass door shutters/steel door frame/wooden door frame/Alumnium door of any size, included for necessary welding work and fixed with screws and fixed, complete all as specified and directed |
| 194 | S&F in door stopper of aluminium alloy body and tongue anodized with hard drawn steel spring fixed in floor overall 150mm complete all as specified and as directed. |
| 195 | S&F in 250mm, ordinary Mild steel rat tail rod pattern springs including roller and roller plate complete all as specified and directed. |
| 196 | Note :- An amount of Rs 26,617.00 on account of credit schedule for schedule \"A\" part II shall be deducted from the total amount of BOQ to arrive at the contract sum. |
Copyright © 2026 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail