Tender For O/W Upgradation Of Site Office At Jageshwar District Almora-Uttarakhand; 1 O/W Upgradation of Site Office at Jageshwar District Almora-Uttarakhand 2 Dismantling dressed stone work ashlar face stone work, marble work or precast concrete work manually/ by mechanical means including stacking of serviceable and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in charge : In lime mortar 3 Excavation work by mechanical means (Hydraulic excavator)/ manual means in foundation trenches or drains (not exceeding 1.5m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soils as directed, within a lead of 50 m. Ordinary rock. 4 Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to dumping ground within 50 metres lead. 5 Providing and laying in position cement concrete of specified grade excluding the cost of cantering and shuttering - All work up to plinth level : 1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) 6 Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with : Cement mortar 1:6 (1 cement : 6 coarse sand) 7 Random rubble masonry with hard stone in superstructure above plinth level and upto floor five level, including leveling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) at window sills, ceiling level and the like. Cement mortar 1:6 (1 cement : 6 coarse sand) 8 12 mm cement plaster of mix : 1:6 (1 cement: 6 fine sand) 9 Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete. 10 Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound) content less than 50 grams/litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and color. Two coats 11 Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete, on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand). Dark shade pigment using Ordinary cement 12 Providing and fixing 4mm thick (WPC) Wood plastic composite board, plain lining with necessary screws, priming coat on unexposed surface etc., complete. 13 Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with adash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately).Sal wood 14 Providing and fixing wire gauge shutters using galvanized M.S. wire gauge of average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm, for doors, windows and clerestory windows with hinges and necessary screws : 30 mm thick shutters With ISI marked stainless steel butt hinges of required size Second class teak wood 15 Providing and fixing 19mm thick both side balancing lamination factory pressed BWP grade marine ply as per IS 710 of approved brand boxes,shelves,racks,almirah,cupboard and drawer etc. including necessary nails,screws etc. complete as per direction of Engineer-in-charge. 16 Providing and fixing cupboard shutter with 19mm thick one side decorative and other side balancing lamination factory pressed BWP grade marine ply as per IS 710 of approved brand including 2mm thick PVC edge banding tape with hot glue by edge bending machine etc. with auto closing spring loaded hinges (hydraulic type) etc. complete as per direction of Engineer in-charge.(Payment of providing and fixing auto closing hinges shall be paid separately) 17 Providing and fixing ready made 304 grade stainless steel Modular kitchen basket and accessories such as right angle basket (Plain Cup & Saucer, plant, Partition, Bottle rack, Thali, Cutlery) kitchen utensil basket, Dinner set basket, kitchen grain basket, Multipurpose basket as per site requirement including finishing (wherever required) and fittings. The same shall be fixed with necessary stainless steel nuts & bolts, Stainless Steel screws & telescopic channel etc. as per direction of Engineer-in-charge. (For payment purpose only weight of Stainless steel basket shall be considered excluding weight of all fixing accessories such as nuts, bolts, fasteners telescopic basket channels etc. Payment of providing and fixing telescopic channel shall be paid separately) 18 Supply and fixing of water purifier RO+UV+UF+Taste Adjuster(MTDS) with Active Copper & Zinc 7L water purifier,8 stages of purification, suitable for borewell, tanker, municipal water including all necessary accessories(All the accessories and purifier must be ISI mark approved brand) transportation complete in all respect. 19 Provision for purchasing and supply of Water Heater (Geyser) 20 ltr, 5 star including all fixtures, fittings etc complete ( ISI Mark) with GST. ( All Material Rate As per prevailing Market rate ) 20 Providing and fixing nickel plated M.S. pipe curtain rods with nickel plated brackets : 25 mm dia (heavy type) 21 Provision for Providing and fixing sanitary installation and water supply in Circle office Toilet including material and labour etc complete 22 Braided Hose with Two 15mm Nuts & Rubber Washers Without Nipple (Suitable for Geysers) 450mm Long (Jaguar Model No ALD-CHR-805B). 23 Health Faucet (8mm Dia, 1 Meter Long Flexible Tube & Wall Hook) (Jaguar Model No ALD-CHR-573) 24 Towel Rack 600mm Long with Lower Hangers, Stainless Steel (Jaguar Model No ACN-CHR-1181S) 25 Towel Ring Round with Round Flange (Jaguar Model No ACN-CHR 1121BN) 26 Soap Dispenser with Glass bottle (Jaguar Model No AKP-CHR-35735P) 27 Glass Shelf 600mm Long (Jaguar Model No AKP-CHR-35771P) 28 Angular Stop Cock With Wall Flange ( Jaguar Model No FLR-5053) 29 Long body Bib Cock with wall flange (Jaguar Model NoCON-107KN) 30 Bib Cock with Wall Flange (Jaguar Model No ORP-10037PM) 31 Soap Dish Holder ( Jaguar Model No ACN-1131N) 32 Swivel Mirror 630 X 445mm Rectangular Shape ( Jaguar Model No AKP-35795) 33 Teflon tape 34 Plumber 35 Beldar 36 Provision for Providing and fixing electrification at site office jageshwar including all material labour etc complete. ( All Material Rate As per prevailing Market 37 Wire 1.00 mm with ISI mark (R.R Cable/ Havells) 38 Wire 2.00 mm with ISI mark (R.R Cable/ Havells) 39 isolator 63 amp with ISI mark 40 M.C.B 16 A with ISI mark 41 Exhaust fan with ISI mark 42 Switch 6 amp(anchor/ISI mark ) 43 Socket 6 Amp with ISI mark 44 Switch box sheet with ISI mark 45 Power Socket with ISI mark 46 Power Switch with ISI mark 47 Electrician 48 Beldar 49 Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. 50 Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. 51 complete.
