Tender For Construction Work Of Library In Ward 65, Vivekanandanagar. - Excavation in foundation in ordinary soil (Loam, clay or sand) including lift upto 1.50 M. and lead upto 30 M. and including filling watering and ramming of excavated earth into the trenches or into the space between the building and the sides of foundation trenches or into the plinth and removal and disposal of surplusearth as directed by the Engineer-in-charge upto a distance of 30 M. from the foundation trenches. (Where machine can not reach/move).PWD SOR 2022 4.1.1 2 S/L P:C:C (1:6:12) with 40 mm gauge brick ballast ,fine sand of 1.25 f.m and cement in foundation and under floor including all materials, labour, tools, & plant etc all completed as per the direction of engineer - in - charge.{ AS PER PWD SOR 2022 PAGE NO 18 SI NO 5.01 ITEM NO 273 } 3 R.C.C work with cement ,approved coarse sand & 2cm gauge approved stone grit in proportions of 1:1.5:3 in lintels of doors &windows excluding supply of reinforcement and its bending ,but including its fixing and binding wire including necessary cantering and shuttering etc .and supply of all materials,labour,tools& plants etc. required for proper completion of the work including cost of binding wire. the rate excludes making of drip course which shall be paid extra etc all complete as per direction of engineer in charge.(AS PER PWD SOR 2020/283 a .) 4 Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level Mild steel and Medium Tensile steel bars DSR 2023 ITEM N. 5.22.1 5 First class Brick Work in (1:4) cement & four coarse sand 2.20 F.M. morter in foundation and plinth and T&P etcall completed as per the direction of engineer - in - charge. (AS PER PWD SOR 2022 PAGE NO 20 SI NO 6.05 ITEM NO 305 (a) 6 12 mm thick plaster with cement and coarse sand of1.25 fineness modules in (1:4) over brick work minimum thickness not to be less than 1 cm including supply of all material, labour, tools & plant etc required for proper completion of the work. (AS PER PWD SOR 2022 PAGE NO 36 SI NO 13.11 NEW ITEM ) 7 M.S. or iron work of small sizes and section such as holding down bolts, hold fast, tie rods grating etc. wrought to required from including supply of steel bolts, nuts wastage etc. and their fixing required for proper completion of the work.PWD SOR 2022 10.21 . 8 Providing and fixing 1mm thick M.S. Sheet garge door with frame of 40x40x6mm (1½x1½x¼) angle iron 3.15 mm (1/8) thick M.S. gusset plate at the junction and corners including supply and fixing of necessary fittings. Lock rail of 15 length of oxidised iron and including pintels hooks at the top and applying priming coat of red lead paint on all sidescomplete. 9 Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete.( 600X600) 10 Supply and fixing 6 mm (1/4”) China white glazed tile in flooring or in skirting or dado laid with 1:4 cement and approved coarse sand mortar finished with white cement slurry, jointing and polishing complete, including supply all material, labours and tools and plants. S.I No. 11.38/D.S.R-2023 11 Providing wall putty on old surface with approved quality material of Berger/ J.K./Birla or similar make 2 coats. 12 Finishing wall with weather coat by premiumacrylic exterior paint applied @ 3.28 ltr/10 sqm(Asian or Berger Brand) of approved make andquality on wall with two or more coat to give aneven shade including a priming coat with cement primer ofapproved brandand manufacturer exterior primer applied @ 2.20kg/10 sqm afterthoroughly brushing the surface free from mortardropping and other foreign matters and sandpapered smooth including supply of all materials, labour, Tools & plants etc. required for proper completion of the work. 13 Painting or varnishing work in small areas or new woodwork with one coat (upto one square metre of ready mixed priming paint and one coat of approved superior quality ready mixed paint or varnish including supply of allmaterials, labour, Tools & plants etc. requiredfor proper completion of the work. Paint to beused should confirm the ISi no. 103-1950. 14 Wiring point for light with 1.5 sqm FRLSH PVC installed multistrand single core copper conductor cable in heavy guage rigid steel conduit concealed in the wall, complete with 14 SWG copper earth continuity wire, piano type switch & ceiling rose on 3 mm thick phenolic laminated bakelite sheet etc complete in all respect, including matching colour wash S.No.- 1.1.1/D.S.R-2022 15 Wiring point for fan/ fresh air fan(light duty exhausted fan) with 1.5 sqm FRLSH PVC installed multistrand single core copper conductor cable in heavy guage rigid steel conduit concealed in the wall, complete with 14 SWG copper earth continuity wire, piano type switch & ceiling rose on 3 mm thick phenolic laminated bakelite sheet etc complete in all respect, including matching colour wash S. No. 1.3.1/ D.S.R-2022 16 Wiring point for plug with 1.5 sqm FRLSH PVC installed multistrand single core copper conductor cable in heavy guage rigid steel conduit concealed in the wall, complete with 14 SWG copper earth continuity wire, piano type switch & ceiling rose on 3 mm thick phenolic laminated bakelite sheet etc complete in all respect, including matching colour wash SOR 2018 141C + 187C 17 Supply and wiring of 2.5 sq mm FRLSH PVC installed 11 V grade multistrand single core copper conductor cable in 20 mm dia heavy guage rigid steel conduit concealed in wall, complete with the one number 14 SWG copper earth continuity wire including matching colour wash etc. complete in all respect. S. No. 1.7.2/D.S.R-2022 18 Supply and fixing of metal box made up of 16 SWG (1.5 mm) thick M.s sheet of 200 X 250 X 75 mm size duly painted with red oxide primer and flushed in wall includding cutting of brick work, fixing it to the level with the cement sand mortar , including matching colour wash with s/o all material, labour and T&P required for proper completion of the work as directed at site by the Engineer in charge.S.No. 1.22.10/D.S.R-2022 19 Supply and laying of aluminium conductor PVC insulated armoured served sheathed cable 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on side and top. On surface the cable run shall be fixed on M.S clamps etc. of suitable size or as directed by the Engineer Incharge, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc.10 sq. mm 2 core. S.No. 7.1.1/D.S.R-2022 20 Supply and burying of 40 mm dia X 4.5 meter long G.I pipe vertically for earthing having 12 mm dia. Holes spaced 75 mm apart drilled upto 2 metre from the bottom complete with earthing lead of No. 6 to 8SWG GI wire in G.I pipe up to appron (and from appronto switch board the cost of G.I wire pipe will be extra) upto switch board, 30 cm square C.I box with hinged cover masonary enclosure, funnel at top , alternate layer of charcol/coke and salt at least 150 mm thick alround etc. as per directions of Engineer incharge complete in all respect as per drawing. S.No. 5.1/D.S.R-2022 21 Supply and fixing of one number 6 SWG G.I wire in 15 mm dia. G.I pipe for earthing, laid in ground or in wall dully concealed including the cost of cement, sand, labour, T&P other material required for proper completion of the work as directed at site. S.No.5.12/D.S.R-2022 22 Supply and fixing of 6 Amp to 32 Amp MCB (10 KA) C CurveS.I.NO-2.10.1/ D.S.R-2022 23 Supply of ceiling fan and regulators & placing fan box etc as required. excluding supply of down rod complete in all respect. S.I.NO-1.45 /D.S.R-2022 24 Installation & testing of exhaust. fan on the existing hole with suitable size of rag bolts. nuts & washer etc. complete in all respect .S.No.1.50.1 /D.S.R-2022 25 Extra for fixing the louvers/ shutter complete with frame for a exhaust fan for all size S.I. NO- 1.51/ D.S.R-2022 26 Providing and fixing coal home regd. heavy duty exhaust fan of 12” size compete. Qty. as per quotation. (L.M.R) 27 Providing and Fixing CFL Standard make. S.I. NO-1.35/D.S.R-2022 28 SUPPLY OF ALMEERAetcall completed as per the direction of engineer - in - charge. 29 SUPPLY OF TABLE AND CHAIRetcall completed as per the direction of engineer - in - charge. 30 Earth Work in Embankment (lead upto 8 km) in ordinary soil excavation to be in the form of regular pits not exceeding 0.50 m in depth earth work in embenkment to in 20 cm layers including remming and dressing the surface to required levels and slops also including 1.50 m lift and 30 m lead. The earth form cutting to be used in making in embekment or to be disposited and spoil banks with in 30 .(AS PER PWD SOR 2022/231( a)+253 (a) S I NO-4.03. 31 S/L of stone ballast 22.4 to 53 mm size with stacking for measurment etc all complete as per the direction of engineer in-charge . AS PER PWD SOR 2020 RMR 32 Supply of screening material with stacking for measurmentetc all complete as per the direction of engineer in-charge .AS PER PWD SOR 2020 RMR 33 Consolidation of stone aggregates of 45-63 mm/22.4-53mm size to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with three wheel 80-100 kN static roller in stages to proper grade and camber, applying and brooming, crushable screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density Grading 2/3 as per Technical Specification Clause 405. AS PER PWD SOR 2022 20.2.1 34 Supply & laying 80 mm thick Precase cement concreteinterlocking paver block (Grey color) with top layer of minimum 8 mm thickness having plan dimension 200X(160+120mm) of O.P cement smoothing gloss finish,skid resistant manufacturered from rubber moulds. RMR 35 GST
