Tender For Annual Repair And Maintenance Of For Portion Of Dto Building (Gf), Sikar For Renting Out To Esic Deptt., sikar-Rajasthan

Tender For Annual Repair And Maintenance Of For Portion Of Dto Building (Gf), Sikar For Renting Out To Esic Deptt.; 1 Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : 1.01 Of area 3 sq. metres and below 2.00 Each 2 Providing half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in cement mortar 1:3 (1 Cement : 3 coarse sand) in superstructure for closing cavity 5 to 7.5 cm wide in cavity wall complete with 10cm / 11.4 cm wide bitumen felt type 3 grade 1. 4.00 One Metre 3 Stone work, plain in copings, cornices, string courses and plinth courses, upto 75 mm thick in Cement mortar 1:6 (1 cement : 6 coarse sand) including pointing with white cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment matching the stone shade. 3.01 Red sand stone 0.05 One Cubic Metre 4 Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete : 4.01 300x16 mm 2.00 Each 4.02 250x16 mm 4.00 Each 5 Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade with necessary screws etc. complete : 5.01 150x10 mm 6.00 Each 6 Providing and fixing aluminium handles ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete : 6.01 100 mm 12.00 Each 7 Providing and fixing 1st quality ceramic glazed floor tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kgper sqm including pointing the joints with white cement mixed with pigment of matching shade complete. 6.50 One Square Metre 8 12 mm cement plaster of mix : 8.01 1:6 (1 cement: 6 coarse sand) 4.00 One Square Metre 9 15 mm cement plaster on rough side of single or half brick wall of mix : 9.01 1:6 (1 cement: 6 coarse sand) 4.00 One Square Metre 10 Distempering with 1st quality acrylic distemper (ready mixed) having VOC (Volatile Organic Compound ) content less than 50 gram/ litre, of approved brand and of required shade and colour complete to give and even shade. 10.01 Old work (one or more coats) 200.00 One Square Metre 11 White washing with lime to give an even shade : 11.01 Old work (one or more coats) . 230.00 One Square Metre 12 Making the opening in brick masonry including dismantling in floor or walls by cutting masonry and making good the damages to walls, flooring and jambs complete, to match existing surface i/c disposal of mulba/rubbish to the nearest municipal dumping ground, all complete as per directions of Engineer-In-Charge. 12.01 For door/ window/ clerestory window. 4.20 One Square Metre 13 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: 13.01 White Vitreous China Flat back wash basin size 550x 400 mm with single 15 mm C.P. brass pillar tap 1.00 Each 14 Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. 14.01 Semi rigid pipe 14.02 32 mm dia 2.00 Each 15 Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : 15.01 Rectangular shape 453x357 mm 1.00 Each 16 Providing and fixing PTMT Waste Coupling for wash basin and sink, of approved quality and colour. 16.01 Waste coupling 31 mm dia of 79 mm length and 62 mm breadth weighing not less than 45 gms. 2.00 Each 17 Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. 17.01 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms. 1.00 Each 18 Providing and fixing PTMT 15 mm Urinal spreader size 95x69x100 mm with 1/2 BSP thread and shapes, weighing not less than 60 gms. 2.00 Each 19 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. : Internal work - Exposed on wall 9.01 20 mm nominal outer dia. Pipes. 6.00 One Running Metre 20 Providing and fixing uplasticised PVC connection pipe with brass unions : 20.01 30 cm length 20.02 15 mm nominal bore 1.00 Each 21 Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 : 21.01 15mm nominal bore 2.00 Each 22 Providing and fixing PTMT bib cock of approved quality and colour. 22.01 15mm nominal bore, 86 mm long. Weighing not less than 88 gms. 1.00 Each 23 Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In- Charge. 23.01 (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately) 23.02 35 mm thick 15.00 One Square Metre 24 Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of EngineerIn- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately) 24.01 30 mm thick 8.50 One Square Metre 25 Removing fasteners from floor (10 to 20m dia. 40 to 60mm length) i/c repairing of flooring with white cement all complete as per direction of Engineer-in-charge. 70.00 each 26 Final Polishing of Marble chips/ terrazzo tile flooring including repairing of joints with white cement whwreever required all complete as per direction of Engineer-incharge. 175.00 One Square Metre

INR 590 /-

INR 1.71 Lakhs /-

FileName	File Description	File Size
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB