Tender For Special Repair To Block No D-10 At Bengdubi Mil Stn Under Ge Bengdubi; 1 Dismantling of plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings, complete all as specified and directed. 2 S&F pre-painted colored trapezoidal profiled Galvalume/Zincalume sheet with min 0.50mm TCT confirming to IS-513 (AZ-150 GSM, AL Zn alloy metalic coating, 550 MPA yield stress as per AS-1397), colour /exterior coat of silicon modified polyster/ BHP X RW paint system 20 microntop coat applied over 5 micron primer and a 5 micron polyster back coat applied over 5 micron primer, as in roof covering/ cladding to wall, fixed with and including Galvanised self drilling self-tapping fastener (12-14 x 55 with EPDM seals), complete all as specified and directed. 3 S&F pre-painted colored plain sheet profiled Galvalume/Zincalume sheet with min 0.50mm TCT confirming to IS-513 (AZ-150 GSM, AL Zn alloy metalic coating, 550 MPA yield stress as per AS-1397),colour /exterior coat of silicon modified polyster/ BHP X RW paint system 20 microntop coat applied over 5 micron primer and a 5 micron polyster back coat applied over 5 micron primer,as in roof covering/ cladding to wall fixed with and including Galvanised self drilling self-tapping fastener (12-14 x 55 with EPDM seals), complete all as specified and directed. 4 Dismantling timber scantlings 40 sq. cm and over in section, in framed section any position like trusses, rafters, purlins etc.complete all as specified and as directed 5 Dismantling wrought iron or mild steel work of any description not otherwise provided for etc complete all as specified and as directed 6 M&L for Second class hard-wood in scantlings timber framed and fixed (wrought) etc complete all as specified and as directed 7 M&L for Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubesetc complete all as specified 8 S&F mild steel rolled sections [Fe 410-W (Gde E-250) quality - B] as in roof trusses (framed), trussed, main and cross beams, hip and jack rafters, purlins, Gusset plate and base plates, where connected to common rafters and running rails, distance pieces, cleats, guides for sliding doors; fixed with angle cleats or other connecting plates, framing for cladding, staging for water tanks, nuts, bolts, washers etc,includng welding or riveting etc, complete all as specified and as directed. 9 M&L for the Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 290 Gde E-165, complete all as specified and as directed. 10 Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), including disposing off the retrieved debris outside the premises, complete all as specified and as directed. 11 M&L for Vitrified Ceramic tiles light shade 8 to10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 15mm thick screed bed in CM (1:6) complete all as specified. 12 M&L for Vitrified Ceramic tiles light shade 8 to10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in vertical surface such as skirting,dadosetc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 10mm thick screed bed in CM (1:3) complete all as specified. 13 M& L for coloured Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) of approved size, area of eachtile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed inwhite cement mixed with pigments to match with the shade of tiles, over and including 15mm thick screed bed in CM (1:6), complete all as specified and as directed. 14 M&L for coloured Glazed ceramic tiles of size 300mmx 450mm , 6 to 7 mm thick on the vertical surfaces such as in skirting / dado etc, set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match with the shade of the tiles, over and including 10mm thick cement mortal backing coat in CM (1:4), complete all as specified andand as directed. 15 Dismantling Stone slabs and tiles of any description or thickness in floors, aprons etc. laid bedded and pointed in any morter complete all as specified and as directed. 16 M&L for granite (of any type)20mm thick (Table rubbled andmirror polished ) insteps, jambs, pillars, window-cills, cooking platform etc, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing including 20mm thick screed bed in CM (1:4), complete all as specified and directed. 17 Demolition of cement concrete (reinforced) Roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work etc complete all as specified 18 S&F anodised aluminium snap grid of size 605x605mm frame work for false ceiling hangers 6mm dia GI (upto 1200mm length) adusting level fixed to roof slabs by means of ceiling cleats made out GIflat iron 40x3mm size 60mm long and fixed expansion hold fasteneners 12.5mm dia and 40mm long, including dismantlingof wall and ceiling boards complete all as specified and as directed. 19 S/F 6 mm thick designedNon asbestos designer fiber cementbuilding boards, fixed or laid /inserted totimber /GI /Aluminium frame-work with screws etc in ceiling.complete all as specified and as directed.Notes :- (i)The board shall be confirming to IS-14862 and shall be manufactured from the homogeneious mixture of cement, quartz and cellulose and shall be curred with high pressure steam using auto claving process.(ii) Aluminium frame work shall be measured and paid for separately. 20 Taking down existing unservicble water proofing treatment from roof slab and cleaning the roof slab by wire brush and removing WPT fell beyond the MOD premises etc complete all as specified and directed. 21 Demolition of cement concrete (un-reinforced) as in benching, cover fillets,roof kerbs, kerbs PCC padding over roof and of any description & in any position not otherwise specifically provided-for, including taking down existing un-servicable waterproof complete all as specified as directed 22 M&L for 40mm thick cement concrete type B0 (1:2:4:) (using 12.5 mm crushed stone aggregates) admixed with admixture aslan plints smartcare vitalla NEO (or any equlvalent brand of other manufacturer) at the rate of 200 gm /50Kg bag cement complete all as specified and as directed 23 M & L for Screed bed or bedding layer of mortar 15 mm thick in CM (1:4)for laying floor finishes over PCC padding etc complete all as specified as directed 24 M&L for waterproofing coating with Polyurethane based Smartcare PU Aqua liquid waterproofing membrane to be applied by brush with three coats, minimum dry film thickness 1mm thick and shall be cured by atmospheric moisture to give tough elastomeric waterproofing membrane, complete as specified and as directed The material should have the below mentioned characteristics-Density : 1.2 kg/lCrack Bridging ability : upto 4mmElongation at break : 450% (ASTM D 412)Tensile strength : 1.50N/ mm2 (ASTM D412)Solid Content : 60%Water impermeability, 7 MPA, 72 Hours : 0 mm (BS EN 12390-8) UN resitant 25 M&L for Repairing of cracks, by identifying the cracks and joints, chasing shall be chased open into U groove shape. The surface of the groove shall be suitably prepared as required to apply the mortar.Aply a boand coat of SBR bsed Latex Smart care Repair polymer and sealed with shrinkage controlled, polymer modified, fibre reinforced cementiotious repair mortar fixing PVC nozzle, injection grouting to be done with cement slurry admixed with non-shrink grouting compound Smartcare Multipurpose Polymer at 2.50Kg/bag of cement, complete all as specified and as directed 26 M & L For Bore packing to be done at pipe entries by forming proper formwork and filling the gap with dual shrinkage compensated and crack resistant, self compacting, free flow cementitious grout, Smartcare General Purpose grout (of make Asian paints LTD or equivalent brand of other manufacturer) and sealed with Smartcare Hybrid PU sealant (of make Asian paints LTD or equivalent brand of other manufacturer), complete all as specified as directed 27 M&L for Coaving treatment to be done at all junction (50mm x 50mm) of vertical and horizontal surface. One coat of bond coat shall apply first on the caoving with SBR based Smartcare Repair polyme and while in tacky condition SBR based smartacre Repair Polymer to be mixed with cement and sand complete all as specified and as directed 28 Demolition of cement concrete (un-reinforced )in ground floors and pavings n exc 15 cm thickness (below or above ground level)including disposing off the retrieved debris outside the premises, complete all as specified and as directed. 29 M&L for providing 75mm thick PCC (1:3:6) type C1 (using 20mm graded crushed stone aggregate), as in plinth protection, surface finished even & smooth without using extra cement including provision of 10 mm joints (at an interval of 3 metre and turnings) duly filled with fine sand and bitumen in the ratio of (3:1), complete all as specified and directed. 30 Demolition of brick work or rubbled stone masonry including all quoins, arches , pillars etc built in cement mortar including disposing off the retrieved debris outside the premises, complete all as specified and as directed. 31 M&L forBrickwork with fly ash Bricks(old size), straight or curved on plan to any radius in half brick walls built in Cement mortar (1:4), complete all as specified and directed 32 M&L forBrickwork with fly ash Bricks(old size), straight or curved on plan exc 6m mean radius built in Cement mortar (1:6), complete all as specified and directed 33 Taking down cement plaster on brick or concrete surfaces etc,including raking out joints, hacking for key, scrubbing down with water etc, and also including removal of rubbish off the premises, complete all as specified and directed. 34 M&L for rendering 5 mm thick in cement mortar (1:3), onconcrete surfaces of ceiling , finished even and smooth without using extra cement, complete all as specified and directed. 35 M&L for rendering 15 mm thick in cement mortar (1:6), on brick work or concrete surfaces, finished even and smooth without using extra cement, complete all as specified and directed. 36 M&L for rendering 15 mm thick in CM (1:4) on brick work or concrete surfaces finished even and smooth (without using extra cement) mixed with water proofing compound as per manufacturer instructions, complete all as specified and as directed.Note:- WPC shall be measured and paid separately. 37 Supply only integral water proofing compound, complete all as specified and as directed. 38 M&L for preparing newPlasterd surfaces of walls duly applied2mm wall care Putty and there after applying two coats of oil bound distemper, white or any tint as approved, over and including a coat of primer, complete all as specified and directed. 39 Material & Labour for preparation of new surface on wall and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqmcomplete all as specified and as directed 40 Material & Labour for preparation of complete removal of old existing treatment plastered surface of walls andapplying Two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm complete all as specified. 41 M&L for complete removal of existing treatment from the internal surfaces of wall etc, applying two coats of wall care Putty (minimum thickness of two layers shall be 2mm) and thereafter applying two coats of oil bound distemper, white or any tint as approved, over and including a coat of primer, complete all as specified and directed. 42 M&L for preparation of new plastered surfaces of ceiling and applying three coat of white washing, complete all as specified and directed . 43 M&Lcomplete removal of existing treatment and applying two coat ofwhite wash on ceilling complete all as specified 44 Taking down chowkats or frames with Wooden/PVC/Flush shutters (without taking off shutter from frames) not exc. 1.5 sqm each, including cutting holes for removing the hold fast etc,disposing off the retrieved debris outsite the premises, complete all as specified and as directed. 45 Taking down chowkats or frames with Wooden/PVC/Flush shutters (without taking off shutter from frames) exc. 1.5 Sqm but n exc 4 Sqm each, including cutting holes for removing the hold fast etc,disposing off the debris outsite the premises, complete all as specified and as directed. 46 M&L for second class HW Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered put together with glue pinned at joints, supplied and fixed 47 Taking down old unserviceable shutters of any description exc 1 but n.exc 2.00 Sqm each and removing materials from the site of work complete all as directed 48 S&F factory made 1.25 mm thick pressed steel frame of size 165 X 60 mm for doors with one or more rebates including necessary provision of lugs, locks strike plate, hinges etc, applying one shop coat of Zinc Chromate primer after preparation of the surfaces,complete all as specified and as directed. 49 S&F factory made 1.25 mm thick pressed steel frame of size 105 X 60 mm for doors with one or more rebates including necessary provision of lugs, locks strike plate, hinges etc, applying one shop coat of Zinc Chromate primer after prepation of the surfaces,complete all as specified and as directed. 50 M&L forcement concrete (1:3:6) type C-1 (using 20mm graded crushed stone aggregate)as in coping, bed block for filling hollow space of steel chowkhats, fixing of hold fast, kneelers, apex stones bed plates,water troughs and the like including weathering, slightly rounded or chamfered angles & throating as including form work as requriedcomplete all as specified and as directed. 51 S&F for 35 mm thick factory made flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides knil seasoned and chemically pressure treated with antitermited complete all as specified 52 S&F for 25mm thick factory made flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides knil seasoned and chemically pressure treated with antitermited complete all as specified 53 S&F 35 mm thickfactory made Prelam wire mesh multipanel solid PVC Door Shutter consisting of framemade out of M.S. Tubes of 19 guage thickness and size of 25 mm x 25mm for stiles as well asfor top and bottom railsM.S. frame shall have a coat of metal primer of approved make and manufacturer. 25 mmx 25 mm M.S. square tubes shall be lipped with plain PVC sheet made from 5 mm (0.25) thick PVC Sheet with 15mm (5nmm x 3 nos) thickness and 25mm width, of Density 600 Kg/Cbm Manufactured by an ISO-9001-2015 certified company 5mm thick single sideprelam with 2,4,6 or 8 panel to be pasted on both sides of M.S. welded frame. Inside hollow area of MS Frame to be filled with suitable thickness solid PVC Sheet, multipanel of Door to be panelled with SS mosquito Mesh and XTN aluminium Mesh for additional strength and safety purpose. Door to be fixed to frame with 3 Nos. M.S. power coated butt hinges size 100mm x 25mmx 2mm and 32 mm long steel screws drilled suitable to pass through both the walls of the M.S. tube. Other hardwares should be fixed with 19x6mm size steel screws etc. complete all as specified and directed. 54 S&F Solid PVC frame (Single Rebated) of size 50mm x 47mm made out 5 mm plain colourPVC Sheet of solid PVC foam with homogenous fine cellular structure having smooth outer integral skin with suitable metal stiffner and fixed with 100 x 8 sheet metal CSK screws complete all asspecified and as shown on drawingand as directed.Note :- Door frame shall be water proof, termite proof, elegant and should have excellent screws holding strength to fix hinges and hold doorsproperly for a long life . 55 S&F Factory Made Solid PVC Moulded Door Shutter with particle board core, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & show on drawing for SI NO 8101 on Sr. Page No181 of SSR Part -IIand as directed. 56 S&F stainless steel wire cloth. 0.63mm nominal dia of wire and average width ofaperture 1.40mm and fixed with stainless steel wire staples, complete all as specified and as directed. 57 S&F 250mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy, complete all as specified and as directed. 58 S&F 100mm size butt hinges, heavy weight, cold rolled, mild steel, complete all as specified and as directed. 59 S&F150 mm size aluminium handle, cast type, anodised, complete all as specified and as directed. 60 S&F Aluminium anodised barrel towerbolt, 100 mm long of extruded section, complete all as specified and as directed. 61 S&F Aluminium anodised barrel towerbolt, 150 mm long of extruded section, complete all as specified and as directed. 62 S&F 75mm aluminium anodizedhandle extrudedcast type complete all as specified and directed. 63 M&L preparation of old painted surfaces of steel surfacesof any description not otherwise described over 10 cm width or girth and applying two coat of synthetic enamel paintcomplete all as specified and as directed. 64 S&F decorative stainless steel curtain rod of wooden finish 20mm dia thickness not less than 0.75mm fixed with curtain rod holder fixed in walls with screws and finials caps with 06 Nos of curtain ring per Rm complete all as specified and direced. Note :- Curtain rod holder and finials caps will be measured and paid seperately at supply only rates) 65 Supply only decorative stainless steel curtain holding bracket suitable for holding 20mm curtain rod heavy duty complete as specified and directed 66 Supply only decorative stainless steel finial end cap suitable for curtain rod of 20mm dia as approved complete as specified and directed 67 Material and labour for preparation of old surface wood and wood base surfaces of any description, not otherwise described over 10cm width or girth and applying one coats of synthetic enamel paint completeall as specified. 68 M&L for preparation of new steel surfacesof any description not otherwise described over 10 cm width or girth and applying two coat of synthetic enamel paintover red oxide complete all as specified and as directed. 69 S&F rotational moulded polyethylene water storage tank 1000ltrs capacity, ISI marked, (cylindrical vertical type double-layered) with closed top including inlet,outlet and wash out holes, provision of G.I Fittings for fixing of the inlet, outlet and washout pipes, hoistedin position, including dismantling of existing water tankcomplete all as specified and as directed. 70 S&F Ball valves, high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball, screwed for iron pipe of 20mm bore (Minimum weight 210 grms), complete all as specified and as directed. 71 Taking down steel tubing & connections including cleaning for refixing serviceable pipe or removal balance pipe of 15 mm dia bore complete all specified . 72 Taking down steel tubing & connections including cleaning for refixing serviceable pipe or removal balance pipe of 25 mm dia bore complete all specified . 73 S&F laying of CPVC pipes SDR 11& plain CPVCSDR 1120mm outer dia laid in trenches/wall complete all as specifed 74 S&F 25 mm bore medium grade GI tubing with all fitting and fixed complete to wall and ceiling or laid in floors.complete all as specifed 75 S&F in repairs bib tap, fancy type, cast copper alloy, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or brass ferrule of 15 mm bore, complete all as specified and as directed. 76 S&F in repairangale/stop cock, cast copper alloy, chromium plated, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unionsof 15 mm bore,complete all as specified and as directed. 77 S&F CPVC brass elbow for 20 mm outer dia of pipe etc complete all as specified and as directed. 78 S&F CPVC brass Tee for 25 mm outer dia of pipe etc complete all as specified and as directed. 79 S&F gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe of 20 mm bore, complete all as specified and directed. 80 S&F in repairStop valve (concealed type long shank) fancy type, cast copper alloy, chromium plated, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unionsof 15 mm bore,complete all as specified and as directed. 81 S&F in repair Vitreous china wash down water closet pan (Padestal Pattern), including connection to flush pipe, P or S trap, with fixing bolts PVC seat cover with chromium plated mild steel hinges device(excluding flushing cistern and flush pipe),and making goodto dismantled/damaged tiling floorcomplete all as specified and directed. 82 S&F in repairsVitreous china squatting pan Orrisa patterns of size 580mm x 440mm white, (excluding flushing cisterns and flush pipe),including brass chromium plated trap P or S pattern with inlet and outlet integral foot rests, complete all as specified 83 S&F in repair Health faucet (ABS Body) mild steel CP suitable for 15mm dia pipe with 1.25m long flexible tube and ABS wall hook incl making connection and fixed in position complete alla specified 84 S&F in repair chromium plated two way angle stop cock 15mm dia complete all as specified 85 S&F in repair Sinkmade of 1 mm thick sheet of stainless steel (Bronze range super steel 204 : Matt) for kitchen or laboratory with and including plugs, washers, 32mm bore brass chromium plated waste fittings, 32mm bore PVC waste pipe, also including bedding in cement mortar (1:3) on dwarf wall or including providing mild steel cantilever brackets and connecting union to pipe, overall size 495mm x 420mmwith bowl size 410mmx 330mm x 160mmcomplete all as specified and as directed. 86 S&F in repair 0.5mm thick stainless steel plate rack of overall size 24 x 36 x 10 inch of standard quality and shapes complete all specified 87 S&F in repair chromium plated sink mixture with or without lettered hot or cold including telephonic shower arrangment including joints to steel pipes or unions and plugging and screwing complete all as specified 88 S&F in repair vitreous china wash basin, 1st quality, white, flat back, approx size 550x400mmexcluding taps but including 32 mm bore brass chromium platedwaste fittings, 32mm bore PVC waste pipe,MS brackets, complete all as specified and as directed. 89 S&F in repair PVC valveless double syphonic action type flushing cistern low level of 10 Ltr capacity white with inlet ball valve, float, flushing bend & handle including brackets, suitable for both Indian Type Water Closet & Europeon Type Water Closet including brackets & connection to pipe etc complete all asspecifiedand as directed 90 S&F central hole basin mixer swan neck pillar tap cost copper alloy chromium plated, screwed sown high pressure with or without lettered hot or cold with long scewed shank any fly nuts screwed for iron pipe of 15mm bore complete all as specified 91 S&F in repairs 600x 450mmbevelled edge mirror of decorative type, selected qualitymounted on and including 6 mm thick commercial plywood and provision of wooden plugs with chromium plated brass screws and cup washers for fixing, complete all as specified and as directed. 92 S/F in repair Shelf 5.5mm thick of glass 600 mm longfixed with and including Chromium plated brass screws and wooden/plastic cleats (minimum weight 300gms) 93 S&F in repairs tubular towel rail, 20mm dia, D type, brass chrormium plated, 600mm long between flanges, complete all as specified and as directed. 94 S&F in repair chromium plated shower roses 125 mm size with or without swivel joints of standard size including fixing to 15mm steel pipe or union complete all as specified and as directed. 95 S&F in repair PVC connection 15 mm size with PTMT nuts of length 450 mm, complete all as specified and directed. 96 M&L Cutting chases,pinning making good to facing where required and pointing in CM 1:3 for concealled water tubing etc and making good cutting n.exc 10cm girth complete all as specified 97 Taking down PVC rain water pipes (any size or pattern ) including all fittings head shoes etc complete all as specified and as directed. 98 S & F PVC (SWR) pipes 110 mm bore single socketed, in any length with rubber ring joints,fixed in wall complete all as specified and as directed. 99 S&F 110mm bore PVC (SWR) bends (any radius) with and including rubber ring joints, complete all as specified and directed. 100 S&F 110mm borePVC (SWR) vent cowl complete all as specified and directed 101 S&F 110mm bore PVC (SWR), junction single, (Single T) equal or unequal complete all as specified and directed 102 S & Fin repair 110 mm bore PVC (SWR) floor trap, plain with grating including jointing with solvent cement, complete all as specified and directed. 103 M&L for Providing 20mm thick cement plaster in cement mortar (1:3) in mixed with Pidi Proof LW or Dr Fixit @ 200 ml per 50kg of cement and finished even and smooth surface without using extra cement as in sunken floor treatment etc complete all as specified and as directed Note : WPC shall measured and paid saperately under respective item) 104 M&L for cement concrete (1:5:10) type E-2 using 40mm graded brick aggregates as in sunken portion of WC etc complete all as specified and as directed 105 M&L for applying evenly a tack coat ofindustrial bitumen 85/25 at the rate of 1.2kg /sqm as in sunken floor etc complete all a specified 106 S&F for hard drawn steel wire fabric (weight not exc.4kg/Sqm) fixed in tank caging,cut to lengths, bent to shape required and tying with and including mild steel wire (annealed) not less than 0.9mm in dia, complete all as specified and directed. 107 M&L for Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering,running rails and guides) and hanging; also fastening and fixing completeFe-290Gde E-165 complete all as specified 108 S & F for Mild steel, plain, blacksheet 1mm sheet thicknessin wall cladding,steel gates and similar work, cut to size, holes punched; including round headed screws,clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles etc as required complete all as specified and directed. 109 S & F PVC (SWR) pipes 75mm bore single socketed, in any length with rubber ring joints,fixed in wall complete all as specified and as directed. 110 S&F 75mm bore PVC (SWR) bends (any radius) with and including rubber ring joints, complete all as specified and directed. 111 M&L for precast Reinforced cement concrete (1:2:4) type B-1 (using 20 mm graded crushed stone aggrgates ) set in CM (1:4) as in landing, cover slab (for manholes, chulla hoods, chajjas, water trough, mangers, shelves and similar article with plain faces including form work complete all as specified and as directed. 112 M&L for TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia, or securing with clips etc, complete all as specified and as directed. 113 M & L for RCC (1:2:4) (using 20mm graded stone aggregate) Type B1(Nominal mix) as in las slabs supported on walls ,beams and columns in floors , roof landings, balconies canopies complete all as specified and as directed. 114 Use and waste of formwork to soffits of suspended slabs such as roof slabs, floor slabs, chajjas landings and similar work, not exceeding 200mm thick (horizonal or slopping) for rough finished flat surfaces of concrete, complete all as specified and as directed. 115 M&L for cement concrete (1:3:6) type C-2 (using 40mm graded crushed stone aggregates) for 150 mm borepipes as in bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested, complete all as specified and as directed. 116 Excavationin trenches , n .exceeding 1.5m wide and n exc 1.5m deep for fdn etcfor shafts manholes etc n exc 10 sqm on plan and n exc 1.5 mtr depth andin soft/loose soil and getting out, complete all as specified and as directed. 117 Removing excavated material to a distance not exc 50.00 mtr and depositng where directed at a level n.exc 1.5m above the starting point, complete all as specified and as directed. 118 Returning, filling in, including spreading, levelling,watering and well ramming in layers not exc 25 cm thick with soil etc complete all as specified and directed. 119 S&F150 mm bore SGSW pipe, grade A, laid in trenches including jointing with cement mortar, including demolition and breaking up drain pipes complete all as specified and directed. 120 Cutting into existing manholes for connecting new drains of internal dia of pipe 150mm bore, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required, complete all as specified and as directed. 121 S&F in repairs Salt Glazed gully trap square or round mouthed 150X150mm, (type p or q or s )setting and jointing with solvent cement etc complete all as specified and as directed 122 Taking down particle board fixed in any position complete all as specified and as directed 123 M&L including installation & testing for L type modular Kitchen size approx 2500 x 3250 with following accessories. Complete all as specified and directed.(i) Handle type- 96 mm SSHandle (Upper Cabinets only).(ii) Handle less- SS cabinets and plywood cabinets below cooking slab .(iii) Laminate-Out side colour inside white.(iv) Carcass- Waterproof plywood of grade 710 with Decorative laminates outside colour and inside white .(v) Kitchen Chimney (KAFF MEL BF or equivalent as specified in particular specification.(vi) Basket- wire Basket 10 Nos SS 304 Grade (06 Nos plain baskets, 01 Nos Cutlery, 01 Nos plate, 01 No Cup and saucer and 01 No pull out) Make-EBCO or Equivalent.(vii) Channel - Telescopic Channel Hard ware used- Godrej/Hafle/EBCO or Equivalent.(viii) Hinges - 0 to 10 Degree as required make-Hafle Godrej or Equivalent(ix) Upper cabinet - 02 Nos with plywood and lamiante . 124 Providing and fixingfactory made uPVC white color sliding window three track madeof extruded profiles with wall thickness of 2.5 mm (+- 0.2mm).window profile with hollow section with multi chamber, frame (109 mmx 52mm). Sliding slash (42 mm x 56 mm) , sliding interlock (One vertical length in each shutter). Glazing bead (25 mm x 16 mm) will he metered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc. Making arrangement for fixing of hardware 1.2 mm EPDM gasket and 1.0 +- mm thick galvanized steel frame to be inserted in required profile, frame will be fixed to the wall with 8 mm x 1000mm long fasteners. Touch lock of zinc alloyed ( white powder coated), steel roller system including 5 mm thick glazing with selected quality glass, wool pile foe sliding sash and interlock etc complete all as specified. 125 M&L For machine cut kota stone slab in riser of step,skirting, dado etc18-20 mm thick over and including screedin cm1:4(10 mm) laid and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing complete. 126 M&L for 75 mm thick cement concrete type C- 2, (1:3:6) (40mm graded aggregate) as in floor complete including all as specified & as directed. 127 M&L for exterior grade(Lequre coated), coloured glossy finish rubber pressed, cement concrete designer chequred tile of approved quality and size 300X300X 25mm thick set, jointed and pointed in neat cement slurry with grey cement with colour to match the complete all as specified and directed. 128 S&F White coloured ventilator frame RPC-50-01 reinforced 1.2mm thickness including frosted toughned glass of thickness 4 mm including all fittings etc. complete all as specified and directed 129 Taking down carefully existing aluminium point wiring (light / fan / socket or power point) complete, with all fittings such as switch socket combination, switches, sockets, regulator, ceiling rose, utility light fittings and lamp holders etc and making good the disturbed surfaces of walls, roof and floor etc to match with the existing specification, complete all as specified and as directed. 130 Taking down old/unserviceable distribution board by disconnection of electric connection carefully SPN DBs/ TPN DBs/Main Switch including old unserviceable MCCBs/MCBs, Isolators, etc and making good to disturbed surface complete all as specified and as directed. 131 Taking down carefully copper/aluminium sub main wiring of any size from surface/concealed/existing conduit of any height and removing materials at site and making good disturbed surface complete all as specified and as directed. 132 M&L for point wiring for one light point/ one fan point/ one exhaust fan controlled by 1 one way switch with 1.5 Sqmm PVC insulated unsheathed single core multi-stranded copper conductor (FRLSH) cable 1100 Volts grade drawn through and including rigid non metallic PVC concealed conduit (medium grade) of suitable dia, (also including conduit fittings, along with 1.5 sqmm continuous PVC insulated unsheathed single core multi-stranded copper conductor (FRLSH) cable for earth continuity wire, connected to earth dolly and to be terminated in and including factory made anodized pressed steel sunken boxes (Having wall thickness not less than 1.22 mm for boxes suitable size and beyond that the wall thickness shall be not less than 1.63 mm), concealed type with and including 3mm thick bakelite sheet cover for mounting switches, sockets, fan regulators etc, testing on completion also including cutting chases for concealed conduit, steel boxes etc, pinning in, making good the surfaces in CM 1:3 tofor One light /Fan point controlled by one, one way switch match with the adjoining surfaces , complete all as specified and as directed. 133 All as per item No 132 here-in-before but for one 3pin 5 Amp switch socket outlet, independent board , complete all as specified and as directed. 134 All as per item No 132 here-in-before but for one fan point/exhaust fan point controlled by one switch on the same board complete all as specified and as directed. 135 All as per item No 132 here-in-before but for one light point controlled by two , two way switch 5/ 6Ampcomplete all as specified and as directed. 136 All as per item No 132 here-in-before but for one 3pin 5 Amp switch socket outlet, same boardcomplete all as specified and as directed. 137 All as per item No 132 here-in-before but for one bell point controlled by one, bell switch 5/6 Ampscomplete all as specified and as directed. 138 All as per item No 132 here-in-before but for one 5/15 Amp switch socket outlet, independent with 2.5 Sqmm single core multi-stranded copper conductor cable (FRLSH) along with 2.5 sqmm continuous PVC insulated unsheathed single core multi-stranded copper conductor (FRLSH) cable for earth continuity wire, complete all as specified and as directed. 139 S&F Modular switch 1 way 6A, 1 module, complete all as specified and directed. 140 S&F Modular switch 2 way 6A, 1 module, complete all as specified and directed. 141 S&F Modular switch 1 way 16A, 1 module, complete all as specified and directed. 142 S&F Modular Bell push, 6A, 1 module, complete all as specified and directed. 143 S&F Modular socket 6A , 2/3 pin combined, 2 module, complete all as specified and directed. 144 S&F Modular socket 6A/16A , 2/3 pin combined, 2 module, complete all as specified and directed. 145 S&F Modular socket outlet 3 pin 25 Amps 2 module AC 230 volts, complete all as specified and directed. 146 S&F Modular starter Switch 25 Amps 2 module AC 230 volts, complete all as specified and directed. 147 S&F ceiling rose, surface Bakelite with 3 terminals ,ISI marked for batten fitting complete all as specified and directed. 148 S& F stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc. as reqd 149 S&F call bell Electric ding dong, type suitable for operation on230V single pole, complete all as specified and directed. 150 Material and labour for sub main wiring with 2 run of single core PVC insulated (unsheathed) multi stranded copper conductor FRLSH cable of size 2.5sqmm and one run of single core PVC insulated (unsheathed) multi stranded copper conductor FRLSH cable of size 2.5sqmm as in continuous earth wire drawn into and including concealed PVC conduit, medium grade of 25mm bore complete with fittings, PVC Junction Boxes, fixings accessories, also including cutting chases, pinning in, making good to facing and pointing in using cement mortar 1:3 and making good disturbed surfaces to match with the adjoining surfaces, complete all as specified and as directed.Note:- For payment purposes, 2 runs of main cable (each of 1RM) 1 run of earth continuity cable (1RM) and one run of conduit (1RM) all together shall be considered as 1RM. 151 Material and labour for sub main wiring with 4 run of single core PVC insulated (unsheathed) multi stranded copper conductor FRLSH cable of size 6sqmm and one run of single core PVC insulated (unsheathed) multi stranded copper conductor FRLSH cable of size 6sqmm as in continuous earth wire drawn into and including concealed PVC conduit, medium grade of 25mm bore complete with fittings, PVC Junction Boxes, fixings accessories, also including cutting chases, pinning in, making good to facing and pointing in using cement mortar 1:3 and making good disturbed surfaces to match with the adjoining surfaces, complete all as specified and as directed.Note:- For payment purposes, 4 runs of main cable (each of 1RM) 1 run of earth continuity cable (1RM) and one run of conduit (1RM) all together shall be considered as 1RM. 152 Material and labour for sub main wiring with 2 run of single core PVC insulated (unsheathed) multi stranded copper conductor FRLSH cable of size 4sqmm and one run of single core PVC insulated (unsheathed) multi stranded copper conductor FRLSH cable of size 4sqmm as in continuous earth wire drawn into and including concealed PVC conduit, medium grade of 25mm bore complete with fittings, PVC Junction Boxes, fixings accessories, also including cutting chases, pinning in, making good to facing and pointing in using cement mortar 1:3 and making good disturbed surfaces to match with the adjoining surfaces, complete all as specified and as directed.Note:- For payment purposes, 2 runs of main cable (each of 1RM) 1 run of earth continuity cable (1RM) and one run of conduit (1RM) all together shall be considered as 1RM. 153 S&F sheet metal enclosure for MCBs DBs, SPN, 4 waywith 200Amps rated bus bar 415 volts, Double Door with magnetic locking system, Powder coatedincluding necessary provision for inserting the DBs in wall by cutting the bricks/stone masonaryetc and making good of disturbed surfaces to match with existing colour of wall, complete all as specified and as directed. 154 S&F sheet metal enclosure for MCBs DBs, SPN, 12 waywith 200Amps rated bus bar 240 volts, Double Door with magnetic locking system, Powder coatedincluding necessary provision for inserting the DBs in wall by cutting the bricks/stone masonaryetc and making good of disturbed surfaces to match with existing colour of wall, complete all as specified and as directed. 155 S&F sheet metal enclosure for MCBs DBs, SPN, 4 waywith 200Amps rated bus bar 240 volts, Double Door with magnetic locking system, Powder coatedincluding necessary provision for inserting the DBs in wall by cutting the bricks/stone masonaryetc and making good of disturbed surfaces to match with existing colour of wall, complete all as specified and as directed. 156 S & F MCB triple pole and neutral rated capacity 40 to 63 amp rating 415V, breaking capacity10KA C curveand currentindication for individual pole and designed based on advanced current limiting hammer trip mechanism ,complete all as specified and directed. 157 S & F MCB single pole and neutral rated capacity 6 to 32 amp rating 240V, breaking capacity10KA C curveand currentindication for individual pole and designed based on advanced current limiting hammer trip mechanism ,complete all as specified and directed. 158 S & F MCB single polerated capacity 6 to 32 amp rating 240V, breaking capacity10KA C curveand currentindication for individual pole and designed based on advanced current limiting hammer trip mechanism ,complete all as specified and directed. 159 S & F for Decorative wall mounted luminaire made out of polycarbonate with unbreakable globe suitable for LED bulb and provosion of LED bulb 10 wattscomplete all as specified and directed. 160 S & Ffor LED 10 watts batten aluminium extrued with decorative end caps, complete all as specified and directed. 161 Supply and fixing LED tube light batten box type with decorative end caps including one single LED tubelight 1x18/20 watt T8 lampstypecomplete with both end bi-pin holder and all accessories internally prewired and fixed to wall/celling incl fittings accessories and connecting up with new 3 core multistranded copper conductor cable suitable size 23/0.193 from ceiling rose to fitting complete all asspecified. 162 S & F energy saving new generator enviromental friendly long life versatile presure die cast aluminium IP 66 for securty ligh fitting luninaire with high power LEDs as ligh source (100 Im/watt) with LDR sensor for automatic ON/OFF operation and electronic driver of capacity 25 watts with pre-wired and necessary mounting arrangements and provison of 2.5 sq mm three core copper conductor cable multi stranded from ceiling rose to light fitting including necessary dia GI pipe medium grade braket 1.0 mtr long bend to requred shape with clamps, nut bolts including painting of mild steel flat iron surfaces with two coats of synthetic enamel paint over a coat of red oxide primer , complete all as directed by Engineer-in-charge. 163 S & F for Energy saving new generation 10 watts LED bulk head fitting IP 65 luminaire with opel diffuser pre wired with necessary mounting arrangments , provision of new 3 core multistranded copper conductor cable suitable size 23/0.193 from ceiling rose to fitting complete all asspecified. 164 Taking down ceiling fan/exhaust fan any sweep, keeping with safe custody and depositing to mES Store Yard, complete all as specified and directed by the Engineer-in-charge. 165 S&F energy saving BLDC ceiling fan; 5 star rating, Type of motor - Brush Less DC Motor (BLDC) and Input Power - 32 to 35 Watts with full speed and reduced power consumption with reduced speed technology, Voltage- 90-300V AC, 50Hz, single phase, RPM - 340 to 375 rpm, Blades- Decorated, Sweep - 1200 mm, Air delivery - Not less than 210 CFM with service value 6.00 BEE and Colour - Glow white/ Toast Brown/ Gloss Black or others as approved by GE,complete all as specified and as directed. 166 S & F energy Exhaust fan of 300 mm sweep made of metal body Ventil Air-DS type complete with louver with botls nuts and washers size of the bolt 15 cm long 12 mm dia embedded in the wall including provision of PVC flexible copper cable of size 23/0.0076 two core from ceiling rose to exhaut fan for connection and making suitable size of hole to esiting brick wall for fan base complete all as specified and directed. (Note: Cost of suitable opening wall for fixingexhasut fan is deemed to be included in overall rate quoted). complete all as directed and specified. 167 S & F for energy Exhaust fan of 300 mm sweep made of metal body Ventil Air-DS type complete with louver with botls nuts and washers size of the bolt 15 cm long 12 mm dia embedded in the wall including provision of PVC flexible copper cable of size 23/0.0076 two core from ceiling rose to exhaut fan for connection and making suitable size of hole to esiting brick wall for fan base complete all as specified and directed. (Note: Cost of suitable opening wall for fixingexhasut fan is deemed to be included in overall rate quoted). complete all as directed and specified. 168 S & installation and testing ofElectric water heater , storage vertical type BEE 4/5 star rated, 25ltr capacity 240 volts 50 Hz comprising of high wattage heating element for instant heating , extre Mild steel with glass lined coated inner tank , rust & shock proof ABS outer body, non-ferrous pressure plate with & including provn of 4 Nos grouting bolts suitably flushed to wall or any other surface including electric connection with 3 core PVC insulated , sheathed, stranded copper conductor cable/flexible chord and one no 15 amps 3 pin plug top etc complete all as specified and directed. 169 M&L for Earthing complete with galvanized steel earth plate electrode 600 mm X 600 mm X 6 mm thick buried directly in ground (earth pit not less than 2.25 m deep below ground level) with top edge of plate not less than 1.5 m below normal ground level, connected to galvanised earth strip 25x4mm by means of bolts, nuts, check nuts and washers of galvanized iron or steel,including 40mm dia medium grade protection pipe for earth lead complete with charcol and common salt including watering arrangments with galvanized iron pipe light grade 20mm diaall as shown inNo 3 of SSR Part - I, including necessary excavation and earth work, PCC (1:3:6) type C-1 with PCC Chamber, Ci Frame and cover ,MS funnel with wire mesh .and suitable handle of 10 mm dia round bar), including providing charcoal or coke and common salt in alternate layers of 15 cm compacted thickness all around the earth electrode, with funnel and 40 mm bore galvanized iron watering pipe (Medium grade), wire mesh, aluminium lugs, complete in all respect, GI earth strip protected by 15 mm bore (medium grade) galvanized iron pipe and other end connected with main switch board or Earthing test point as directed, including necessary earth work and disposal of spoil to a distance not exceeding 50 m and necessary testing on completion, including dismantling old unsv ones complete all as specified .Note: GI earth wire 4mm dia and 15mm bore protection pipe upto 7.5m from earth plate is deemed to be included in the rate quoted be contrator. 170 Supply, Installation, commissioning and testing LT wall mountaing Panel board of minimum size 1.00m(height) x 1.00 (breath) x 0.30m (depth) factory made CPRl approved panel, weather ,dust % vermin proof indoor, double door, front openable and providing rubber/PVc gasket of suitable size all sides of door, with copper busbar of suitable size to MCCB input and MCCB/MCb outpot of suitable length for connection of cable from main busba, made out of 2.00mm thick mild steel CRCA sheet with suitable size angle iron supporting frame including applying two coats of powder coated paint a coat of red oxide zinc chrome primer over exposed external & internal surface suitable for 3 phase 4 wire system 415/440 volts grade including complete internal wiring 1.5 sqmm copper wire and connections of all outgoing/incomming existing cable of any sizecomplete all as specified and as directed.INCOMMING:- (a) Copper strip busbar of size 25x5mm wrapped with PVC sleeves with maintained the colour code and provision of making holes with Copper nuts,bolts & washers for cable connections including hydeograpic insulators with nuts & bolts at both ends =4 Nos(b) MCCB IP 44 and IP 66/67 protection ,4 pole 415 volts, Lcu=25 KA braking capacity, rating 100 Amps,adjustable thermal magnetic release including all fixing accessories with both ends spreadre links=01 Nos(c) Digital Multimeter with PF meter having high accuracy with class 1, 3 rows of display, flush mounting type of size 100mm x 100mm (4x4) square dial with selector dial with selector switch -01 Nos(d) LED Neon indicator lamp (RYB) with holder ,230/25 Volts, AC-01 set(set of three)OUTGOING:- (a) MCB, Triple pole & neutral ,63 amps ,240 volts, C curve , 10 KA all Complete as specified and as diercted=04 Nos(b) Refing of Old electric meter -04 Nos
