To Develop Khaugalli At Sawant Rehankan In Ratnagiri Nagar Parishad Council-cavation for foundation in earth, soil of all types, sand, gravel d soft murum, including removing the excavated material up to distance of 50 m. beyond the building area and stacking and freading as directed, dewatering, preparing the bed for the undation and necessary back filling, ramming, watering cluding shoring and strutting etc. complete. (Lift upto 1.5 m.) y Mechanical Means (21.02) roviding dry/trap/granite/quartzite/ gneiss rubble stone soling 5 cm to 20 cm thick including hand packing and compacting etc. omplete. (21.38) Providing and laying Cast in situ/Ready Mix cement concrete in M-10 of trap/ granite/quartzite/ gneiss metal for foundation and bedding including bailing out water, Steel centering, formwork, aying/pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) (24.01) Providing and Laying Laterite stone masonary in superstructure in C.M. 1:6 (as per circular) Providing internal/external 20 mm thick Ready Mix plaster confirming to IS:4031(Part 4) 1988 and IS 383-1970 in a single coat using Cement mortar of proportion 1:4 containing special type of polymer additives about 0.4%, to all type of surfaces in all positions including scaffolding and curing complete (51.118) Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 mm thick in cement mortar 1:4 using waterproofing compound at 1 Kilogramper cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 mm thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etc.complete Providing and applying Two coats of wall care Putty on plastered surface and Ceiling and Walls to prepare surface even and smooth of approved make, etc complete. (32.34) Providing and applying plastic emulsion paint of approved quality, colour and shade to old and new surfaces in two coats including scaffolding, preparing the surface. (excluding the primer coat)etc. complete. (36.12) Providing and applying two coats of exterior weather shield paint of approved manufacture and of approved colour to the plastered surfaces including cleaning, preparing the plaster surface applying primer coat,scaffolding if necessary, and watering the surface for two days etc complete. NOTE: For Item One Number 15 to 18 prior approval of Superintending Engineer will be necessary (35.26)130 ling and laying vitrified mirror/glossy finish tiles ative type having size 590 mm to 605 mm x 590 mm to 605 18 to 10 mm thickness and confirming to IS.15622-2006 ( Bla) of approved make, shade and pattern for flooring in red position laid on a bed of 1:4 cement mortar including cement float, filling joints, curing and clearing etc. complete. 13 iding and laying vitrified mirror/glossy finish tiles having 590 mm to 605 mm x 590 mm to 605 mm of 8 to 10 mm kness and confirming to IS. 15622-2006 (group Bla) of roved make, shade and pattern for dado and skirting in aired position fixed in 1:4 cement mortar including neat ient float, filling joints, curing and clearing etc. complete 411 viding and fixing rolling shutter fabricated from steel laths of nimum thickness 0.9 mm with lock plate of 3.15 mm thickness nforced with 35 x 35 x 5 mm angle section fitted with sliding Its and handies for both sides, deep M.S. channel section of pth and thickness not less than 65 mm and 3.15 mm spectively with hold fast arrangements, M.S. Bracket plate 300 300 x 3.15 mm minimum size and shape with square ar, suspension shaft of minimum 32 mm diameter, hood cover of LS. sheet not less than 0.9 mm thickness and of any size at top nd safety devices including mechanical gear operation rrangement consisting of worm gear wheels and worms of high rade cast iron or mild steel and one coat of red lead primer etc. complete. (I.S. 62481979) (Without mechanical gear) (39.24) Providing and fixing heavy duty inter locking concrete Coloured saving blocks of 80 mm thickness of having a strength of 300 Kilogram/Sq.cm. of approved quality and shape on a bed of crushed sand of 25 to 30 mm thick including skirting joints and cleaning etc. complete (33.52) Providing and fabricating structural steel work in rolled sections, fixed with connecting plates or angle cleats in main and cross beams, hip and jack rafters, purlins connecting to truss members and the like, as per detailed designs and drawing or as directed including cutting, fabricating, hoisting, erecting, fixing in position, making riveted/bolted/ welded connections and one coat of anticorrosive paint and over it two coats of oil painting of approved quality and shade etc. complete (23.02) Providing and fixing colour coated Zincalume (R) AZ150 (min 150 gms/sq.mt. total on each side) profiled sheets for roofing. The feed material is manufactured out of nominal 0.45 mm Base Metal Thickness (BMT) (0.5 mm TCT), Hi-strength steel with min.550 MPa yield strength, metallic hot dip coated with Aluminium-Zinc alloy (55% aluminium 43.4% zinc 1.6% silicon) with COLORBOND (R) steel quality super durable polyester paint coat (with inorganic pigment). The paint shall have a total coating thickness of nominal 35 um, comprising of nominal 25 um exterior coat on top surface and nominal 10 um reverse coat on back surface. Profile sheet shall have nom. 950-1050 mm effective cover width and nominal 25-30 mm deep ribs with subtle square fluting in the five pan at nominal 180-250 mm center-to-center. The end rib shall be designed for anti-capillary groove, and return leg. The feed material should have coil manufacturers product details marked a regular interval. Including fasteners with min. fastened with min. 25 um Zinc-Tin alloy coated, Hex head, self-drilling screw etc. complete. (weight of profile 4.52 Kilogram/One Square Metre) (38.34) 7ng and fixing on walls/ ceiling/ floor 15 mm dia. uPVC th necessary fittings, remaking good the demolished etc. complete. Including removing existing pipe line if iry and conveying and stacking the same in PWD chowky irected etc. complete (42.89) ing and fixing on walls/ ceiling/ floor 25 mm dia. uPVC ith necessary fittings, remaking good the demolished n etc. complete. Including removing existing pipe line if sary and conveying and stacking the same in PWD chowky directed etc. complete. (42.91) ding and fixing on walls/ ceiling/ floor 32 mm dia. uPVC with necessary fittings, remaking good the demolished on etc. complete. (42.92) iding and fixing C.P. BIB cock with wall flange of approved 2 including necessary sockets/ union nut etc. complete as ted by Engineer in charge (48.28) iding and fixing stainless steel sink of size 600 x 510 x 200 incluidng coupling, outlet pipe, elbow and other necessary ng, finishing etc. complete. (42.78) viding and fixing White glazed with bottle trap earthenware sh Hand Basin of 55x40 cm size including cold water piller s, brackets, rubber plugs and brass chain, stop tap, chromium te bottle trap and necessary pipe connections including UPAC ste pipe and trap upto the outside face of the wall, making good damaged surface, testing etc. complete. (41.69) oviding and fixing 100 mm dia stabiliser pipe/ P.V.C. soil nt/waste pipe and with necessary fixtures and fitting such as inds, tees, single junctions, slotted vent, clamps etc. complete. 2.52) roviding and constructing Brick Masonry Inspection Chamber Dcm x 45cm x 90cm including 1:4:8 cement concrete foundation 2:4 cement concrete channels half round G.S.W. pipes, Brick Masonry, plastering from inside and with frame fixed in cement oncrete with R.C.C. Cover medium duty 140 Kilogramwith frame te complete. (42.12) Providing and laying in position flooring of telephone black /Amba White/Cat bary brown/Ruby red/Ocean Brown granite stone of approved shade and size 18 mm to 20 mm thick on bed 1:6 cement mortar including cement floats striking joints, pointing in C.M. 1:3 curing and cleaning ete. complete. (33.34) Providing antitermite treatment to the sides of flooring of the existing building as per 1.S. 6313 (Part-III) by punching holes 6mm dia, drilled at a distance of 30cm. centre to centre and injecting one percent of chlorodane emulsion concentrate at the rate of 50 ml per hole and sealing by filling putty etc. complete covering 2 years guarantee on bond paper. (21.28) Providing and fixing in position anodised (as per IS 1868/1982) Aluminium fixed staggered (Z. Type) Ventilator with aluminium rectangular pipe 63 mm x 38.10 mm x 1.22 mm at weight 0.650 Kilogram/One Running Metre, Aluminium angle of size 15 mm x 15 mm x 1 mm,aluminium channel of 9 mm sizes, S.S.mosquito net of 304 Grade,4 mm thick float glass per detailed drawing and lae directed by Engineer in charpe (39,78) 20 S etc
