Tender For Renovation Of E-In-C Mechanical Office Atcanal Colony, Cantt Road , Lucknow. - Dismantling brick work or stone work in line or cement mortar and including stacking of materials as directed by the Engineer -in - Charge with in a distance of 60 metres (200ft.) 2 Brick work with common burnt clay non modularbricks of class 150 in superstructure above plinth level up to floor V level in all shapes and sizesCement mortar 1:4 (1 cement : 4 coarse sand) 3 12mm cement plaster in sigle coat on rough side of single/ half brick wall for interior/ exterior plastering in single storey building finished even & smooth 1 cement : 4 coarse sand including all L/M, T&P etc. 4 Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead.For thickness of tiles above 25 mm and up to 40 mm 5 Dismantling dressed stone work ashlar face stone work, marble work or precast concrete work manually/ by mechanical means including stacking of serviceable and disposal ofnserviceable material within 50 metres lead as per direction of Engineer-in-charge : In lime mortar 6 Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.Area of Slab over 0.50 sqm. Granite of any colour and shade 7 Providing and fixing machine cut, mirror/ eggshell polished , Marble stone work for wall lining (veneer work) including dado, skirting, risers of steps etc., in required design and pattern wherever required, stones of different finished surface texture, on 12 mm (average) thick cement mortar 1:3 (1 cement : 3 coarse sand) laid and jointed with white cement slurry @ 3.3 kg/sqm including pointing with white cement slurry admixed with pigment of matching shade, including rubbing, curing, polishing etc. all complete as per Architectural drawings, and as directed by the Engineer-in-Charge.18 mm thick Italian Marble stone slab,Perlato, Rosso verona,Fire Red or Dark Emperadore etc. 8 Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily.Size of Tile 1200 x 1200 mm 9 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in ChargeConcealed work, including cutting chases and making good the walls etc.20 mm nominal outer dia Pipes 10 Providing and fixing C.P. brass bib cock of approved quality conforming to IS 8931 15mm nominal size. 11 P/F C.P. angle valve for cistern, wash basin, Gyger etc. 15 mm nominal hole size including cost of all material, labour, T&P etc. 12 C.P. Brass towel rail 450x20 mm together with pair of C.P. brass brackets to fit the towel rail.450x20 mm 13 P/F C.P. brass Soap Dish , Jaquar ESSCO, Cera, Hindware. 14 P/F toilet paper holders Jaquar ESSCO, Cera, Hindware. 15 Providing and fixing soil, waste and vent pipes :100 mm dia 16 Providing and fixing floor mounted, white vitreous china single piece, double traps syphonic water closet of approved brand/make, shape, size and pattern including integrated white vitreous china cistern of capacity 10 litres with dual flushing system, including all fittings and fixtures with seat cover, cistern fittings, nuts, bolts and gasket etc including making connection with the existing P/S trap, complete in all respect as per directions of Engineer-in-Charge. 17 Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : Kitchen sink with drain board 510x1040 mm bowl depth 225 mm 18 P/F 600x450 mm bevelled edge mirror of superior glass ( of approved quality) complete with 6 mm thick asbestos sheet ground fixed to wooden cleats with C.P. brass screws and washers. 19 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 630x450 mm with a sigle 15 mm C.P.brass pillar taps 20 Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings 21 P/F C.P. Jali 100mm dia 22 Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.Flexible pipe 32mm dia 23 P/f C.P. Brass shower rose with 15x20mm inlet(L&k, Jaquar ESSCo or equiv.) 100mm dia meter 24 C.P. wall mixer with 115 mm long bend pipe for conection to over head shower -15 mm dia 25 Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge. 26 Providing and fixing uplasticised PVC connection pipe with brass unions : 30 cm length: 20 mm nominal bore 27 Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately). Second class teak wood 28 Providing and fixing 2nd class teak wood plain lining tongued and grooved, including wooden plugs complete with necessary screws and primingcoat on unexposed surface. 40 mm thick 29 Providing and fixing false ceiling at all heights with integral densified calcium silicate reinforced with fibre and natural filler false ceiling tiles of Size 595x595 mm of approved texture, design and patterns as per CPWD Specification 2019, to be laid in true horizontal level suspended on interlocking metal T-Grid of hot dipped galvanised iron section of 0.33 mm thick (galvanized @ 120 grams per sqm including both sides)comprising of main-T runners of size 24x38 mm of length 3000 mm,cross - T of size 24x32 mm of length 1200 mm and secondaryintermediate cross-T of size 24x32 mm of length 600 mm to formgrid module of size 600 x 600 mm, suspended from ceiling using galvanised mild steel items (galvanizing @ 80 grams per sqm) i.e. 12x50 mm long dash fasteners, 6 mm dia fully threaded hanger rod upto 1000 mm length and L-shape level adjuster of size 76x25x25x1.6 mm fixed with grid and Z cleat of size 25x37x25x1.6 mm thick with precut hole on both 25 mm flange to pierce into 12x50 mm or even bigger size dash fastener if require, fixed with Glavanised iron perimeter wall angle or size 24x24x0.40 mm of length 3000 mm to befixed on periphey wall / partition with the help of plastic rawl plugs at 450mm center to center and 40 mm long dry wall S.S screws. The work shall be carried out as per specifications, drawing and as per directionsof the Engineer-in-Charge. 30 Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters.9.20.1 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws 31 Providing and fixing 12mm thick frameless toughened glass door shutter of approved brand and manufcature. Including providing and fixing top & bottom pivot & double acting hydrautic floor spring type fixing arrangement and making neecessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-in-charge (door handle. lock and stopper atc to be paid separately) 32 Polishing in high gloss/matt finish melamine clear polish on wood work in required color/wooden shade texture with following process in the sequence as detailed below:1. The surface to be polished is rubbed with sand paper 80/120 no. andthen with sand paper of 160/180 nos.2. Applying two coats of sealer with spray gun and allowing sufficient drying time for 1st coat and 2nd coat is allowed to dry for 8 to 12 hrs.3. On drying of sealer coat, wet rubbing with emery cloth of finer grading with ample water to remove excess sealer layer and make the surface further smooth after this wet rubbing, then surface is applied with special grade melamine fillers to fill all the small and big holes/grooves etc. Filler coat to be allowed to dry for 4 to 6 hrs on which again a light wet rubbing is done this surface is further allowed to dry for 12 hrs.4. On this, 1st coat of melamine polish is applied with spray gun using melamine clear polish and melamine thinner in required proportion.This 1st coat is allowed to dry for 24 hrs then this dry surface is again fine wet rubbed smooth, which is further allowed to dry for 12 hrs. The final melamine polish is applied with compressor pressure spray gun using melamine clear polish and melamine thinner mixed in required proportion complete as per direction of Engineer-in-Charge. (Final coat to be done in 1 or 2 layers without gap of time.) 33 Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete : 250x10 mm 34 Wiring point for light with 1.5 sqmm FR PVC insulated multistrand single core copper conductor cable in heavy gauge rigid steel conduit pipe conceled in the wall, complete with 14 SWG copper earth continuty wire, piano type switch & ceiling rose/angle/batten holder on 3 mm thick Phenoplic lamoinated back light sheet etc. complete in all respect, as directed including matching colour wash. 35 Supply & wiring of sub main with two no.- 4 sqmm FR PVC insulated 1100 volt grade multistrand single core copper conductor cable in 20 mm dia heavy gauge rigid steel conduit on surface, with one number 14 SWG copper earth continuty wire. complete in all resoect. 36 S/F of Flush/ surface mounting 6 ways TPN distribution (Legrand Lexic) without MCB with additional metal door complete in all respect , as directed at site by Negineer-in-charge. 37 Supply and fixing of 36 Watt to 46 Watt indoor Recess mounting LED Square Fitting for Armstrong Ceiling having Powder coated die cast aluminium housing body with extended heat sink and diffuser of Special Polycarbonate meterial and driver setcomplete in all respect.. CAT-AAA 38 Providing and applying white cement based putty of average thickness 2 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 39 Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade : Two or more coats on new work 40 Supply & fixing of anodised/aluminium portion having 2 mm thick aluminium section excluding coating & an average coating of 20 micron fully glazed made of aluminium door tube size 83.5x44.65 mm as vertical member & 114.00 x 44.45 mm size tube in bottom and horizontal members door chaukhat should be of aluminium tublar vertical with two openable shutters. The rate will include cost of material fixtures, 5 mm glass handles, locks, screw necessary beading & excluding cost of floor spring if required for proper completion of work as per direction of Engineer-in-charge. 41 Cement Concrete flooring 1:2:4 (1 Cement : 2 Coarse Sand : 4 Graded stone aggregate) finished with a floating coat of neat cementincluding cement slurry, but excluding the cost of nosing of steps etc . Complete. 40mm thick with 20mm nominal size stone aggregate. 42 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work 50 mm nominal outer dia pipe 43 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work 100mm nominal outer dia pipe
