Tender For Construction Of Baratghar At Village Puraipurwa Gram Sabha Mauja Auser Block Umarda - Cleaning jungle including uprooting of rank vegatation grass bush wood trees and sapling of girth upto 30cm measured at a hieght of 1 metre above ground level & removal of rubbish upto a distance of 50m outside the periphery of area cleared as per si no 259…. 2 E/W in excavation in foundation in ordinay soil (Loam,Clay, or Sand) inculding lift upto 1.50m and lead upto 30m including filling watering and raming of excavated earth into the building and the sides of foundation tranches or into the plinth and removal and disposal of surplus earth as directed by the engineer incharge upto a distance of 30m from the foundation trenches, S.l No 251 3 Providing and laying cemet Concrete in 1:6:12 (1 cement:6 fine sand 12 graded brick ballast aggregate 40 mm nominal size) inculding supply of all materials, labour and T& P etc. required for completion or work and curing complete, including cost of form work in Foundation and floors. S.l. no 273 a 4 Providing and laying cement concrete in C.C in 4:2:1 of not less then strenth of M-15 Stone Grite (20 mm nominal size) approved coarse sand and cement, curing complete inculding cost of from work. In foundation and floor S.I no 279 (a) 5 R.C.C work with cement approved coarse sand and 2cm. (3/4) gauge approved stone grit in the proportion 1:1.5:3 (cement, Coarse sand and 2cm. Stone grite) excluding supply of reinforcecement and its bending and including its fixing and binding the same with 24 BWGI binding wire and including necessary centering and shuttering etx. and also including supply of all materials labour and tools and plants etc. required for proper completion of the work ,S.I. No. 284.1 6 Class M-150 Brick Work in 1:6 Cement and Fine Sand Mortar in foundation and plinth including supply of all material labour and T&P etc. required for proper completion of Work. S I No. 303 7 Class M-150 Brick Work in 1:6 Cement and Fine Sand Mortar in super structureincluding supply of all material labour and T&P etc. required for proper completion of Work. S I No. 303+309+310(a) 8 Class M-150 Brick Work in 1:4 Cement and Coarse Sand Mortar in foundation and plinth including supply of all material labour and T&P etc. required for proper completion of Work. S I No. 305 (a) 9 Mild steel or Iron work in plain work such as reinforced concrete or rinforced brick work ( when not included in and an over all rates) brought to required shape as necessary including bending for proper completion of the work and including the suplly of steel and its wastage Bend. hooks and authorized over lapping shell be muasured upto floor to level. (for 10mm. to 12 mm.) S.I No 504 10 E/W in filling or in embankment in oridnary soil excavation to be in the form of regular pit not exceeding Half M in depth and earth work in embankment to be in 20cm. Layers including rammaing and dressing the surface to required levels & slopes and also including 1.5m. lifts and 3.00km. Lead by cartage the earth from cutting/filling to be used in making embankment are to be 1.00km distance as directed by Engineer-in-charge. S.I. No 253 11 Mild steel and work of small size and section such as holding down wooods hold fasts tierods, grating etc brought to reduired form including suppiy of steel and its wastage in.Si no. 503(a) 12 Fixing MS chaukhat for door window frame in position as per SI no 10.08 13 Supply & fixing of flush doors 32mm thick ofcommercial quality ISI marked plywood including fixing of wooden cleats and stoppers and including fixing adjustment of hinges, bolts, handlefittings with necessary screws, all labour, tools etc. required for proper completion of work as per SI No. 470. 14 Approximate cost of ISI marked oxide iron fittings with screws for door & window etc as per SI no 473 15 15 mm. cement plaster in 1:6 (cement and Fine sand)single coat on Rough side of single or half brick wall for upto floor to level including internal rounded angles chamfers and/ or rounded angles not exceeding 80mm in grith and finished even and smooth. as per S I No. 17.59 16 12 mm. cement plaster in 1:6 (cement and Fine sand)single coat on fair side of single or half brick wall for interior plastring upto floor to level including internal rounded angles chamfers and/ or rounded angles not exceeding 80mm in grith and finished even and smooth. As per S I No. 17.58 17 12 mm thick cement plaster in1:3 consisting of one part of cement and two parts of approved coarse sand laind in pannels with 3 mm floating coat of neat cement , labour, T&P etc required for proper completioof the work. Si no 597 (a) 18 providing and Laying of Interlocking tiles 80 mm thick i/c levelling and dressing of surface to required level and slope filling joints with local sand i/c the cost of labour and material etc. 19 cement concreteflooring in 1:2:4 cement and coarse sand 4 graded stone of size 25 mm thick floor as per si no 14.69 20 P/F glass strips of 3.15mm thickness in joints of floor and skirting at the time of laying floors, flush with floor level including labour, T&P etc, complete in all respect,2.2 cm depth. 631(a) 21 Provinding and Laying of 8 to 10 mm Thick Ivory or Light shade vetrified tiles of 600x600 mm size in flooring or skirting laid with 1:3 cement mortar (1 cement : 3 Coarse Sand ) finishing with cement slury & with pigment grouting & polishing complete i/c supply of all material labour T&P required for proper completion of work 22 Supply and fixing of 6 mm (1/4) china white slazed tiles in flooring or in skirtting or Dado laid with 1:3 cement and approved coarse sand mortar finished with white cement slurry joiting and polishing complete including supply of allmaterial. Labour and tools and plants etc. required for proper completion of the work. as per S.I. No. 628 23 Distemperring with Oil bond distemper of approved brand and manufacture (tow coats) and of required shade on undecorated wall surface to give an even shade over and including priming coatwith cement primer of approved brand and manufacture such as berger ,J&N Salimar , Asian Paints after throughly brushing the surfacefree from mortar droppings and other foreign matters & also including preparing the surface even with plaster of parish of approved synthetic material and sand paper smoothing cost of all mterials T &P etcAs per SI no 649+650 24 Finishing wall with two coat of acrylic smooth exterior paint of approved quality on previousl yboid treated surface with this paint to give an even shade including supplyb of all materials labour and tolse and plants etc required for proper completion of work. ch 15 dsr 13.46.1 25 Providing and appling white cement based putty of average thickness of 1 mm aapproved brand and manufacture over the plssterd wall surface to prepare the surface even and smooth including cost of material labour and T&P etc complete. Ch 16 sl.no 17 26 Painting (two coats) over priming coat over new iron or wood surface upto 10 cm width or girth or small articles not exceeding 0.10 sqm area white suprerior synthetic enamel such as Luxo13, Higlose Apcolite superlace, Deluxe specified brushing to give an even shade and including cleaning the surface ofall dirt, dust and other foreign matter sand papering and stopping including supply oss all materials labours and T& P etc complete . 27 Supply and fixing of 26 guage almunim sheet over toilet door 28 Providingand fixing of 110 mm dia pvc pipe confirming to isi make working presser 4kg/cm2including testing labour t&pand all complete fitting. 29 Supply and fixing of 50 mm dia pvc ventilatingpipe . 30 Supply and fixing of Hexagonal / Round GP fan Box of approved make made upof 1.00mm thick ISI marked GP sheet sopt welded four to eight holes of 25.4mm for pipe entry of the box .holes should be semi -shutterdtype with 0.5mm GP sheet made upper and lower cover duly screwed fitted with 300mm round zink coated MS Bar x 12mm & brand name should be embossed .fixing with wiring conduit laid in the rcc roof before concreting alongwith supply of all material ,labour T & P etc Required for proper completion of the work SI no 1149 31 40mm Brick ballast filling in sock pit includingcost of matrials ,labour etc complete 32 Brick bats Filling in soak pit including cost of Material and labour Complete . 33 Sand filling in sokepit includinglcoast of sand etc complete 34 15mmcement concrete topping 1:2 (1cement :2stone agg. Of sizes 4.75 mm and below by volume ) and monolithic base concrete including fixing of glass stripps (excludingcost of glass strips as disered by Engineer in charge.as per si no 14.66 35 Providing and fixing water closet squatting pan (Indian tyoe W.C pan) with 100 mm sand cast Iran P or Strap, 10 liter low level white P.V.C flushing cistern, including flush pipe, manually controlled device (handle lever) conforming to IS: 7231 with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: White Viterous china Orissa pattern W.C pan of size 580x440 mm with integral typd foot rests. Chapter- 24 SI No1 36 Providing and fixing 32 mm dia flexuablePVC waste pipe for sink including PVC waste fittings complete As per chapter no 24,8 B (i) 37 Supply an fixing of HEP Nahani trape of indian make HCI 100x75 mm 4kg 58+ch22 38 Supply and fixing Looking mirror with polish of 600*450 mm size with bevelled. as per SOR No. ch.24(7) 39 Supply and fixing of wash basine 550X400 mm With single 15mm cp brass pillar tap, 32mm cp brass best of stenderedpatterned ,including painting and fitting and bracket cutting and making good the wall where ever required . as per SOR No. chap.24(3)D 40 Supply and hosting of 1000 litre ISI marked Sintex or equivalent highy density Polyethylene seamless of piece moulded tanks and placing the samein proper position including all taxes, labour ,&T&P etc for completion of work 41 Providingand fixing 32 mm dia chlorinated polyvinyl chloride (CPVC)Pipes ,having thermal stability for hot & cold water supply ,including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00m spacing .this includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of engineer in charge . as per SI no 17 ( D) 42 Providingand fixing 20 mm dia chlorinated polyvinyl chloride (CPVC)Pipes ,having thermal stability for hot & cold water supply ,including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00m spacing .this includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of engineer in charge . as per SI no 17 ( B) 43 Providingand fixing 16mm dia chlorinated polyvinyl chloride (CPVC)Pipes ,having thermal stability for hot & cold water supply ,including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00m spacing .this includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of engineer in charge .concealed work including cutting chase and making good the wall etc as per SI no 18 (A) 44 Providing and fixing C.P.Brass long body bib cock of standered design and of 15 mm nomonal bore of approved make conforming to IS:8931as per chapter-23 SI No 34 45 Supply and fixing of Stopcock20 mmof approved quality Ch. 23 S No.39 (b) 46 Supply and fixing of 15mm ball float valveapproved quality 47 Wiring point for light with 1.5 sq. mm FRLSH PVC insulated multistrand single core copper conductor cable in PVC conduit pipe partly concealed In wall, and partly laid in slab along with the reinforcement before concreting complet with 1.5 Sq. mm FRLSH PVC inslulated multistand coper conductor cable as earth wire drawn inside conduit, piano type switch & ceiling rose/ angle/ batten holder on 3 mm thick phenolic laminated backelite sheet etc.,complete in all respect, as directed including matching color wash. SI No.-138 (C) 48 Wiring point for fan/ fresh air fan (light duty exaust fan) with 1.5 sq. mm FRLSH PVC insulated multistrand copper conductor cablein PVC conduit pipe partly concealed In wall, and partly laid in slab along with the reinforcement before concreting complet with 1.5 Sq. mm FRLSH PVC inslulated multistand coper conductor cable as earth wire drawn inside conduit, piano type switch & ceiling rose on 3 mm thck phenolic laminated backelite sheet etc complete in all respect, including matching color wash. SI No.-140 (C) 49 Supply and fixing of BEE4 starrated-1200mm 1709/1984 with latest amendment. The rated voltage 220/240volts,50Hz,1-phsweep ceiling fans with fan moter of A.C permanent insulation capacitor rating confirming BEE 3star rating and IS:347/79 and also comply with IS:1709/1984 with latest amendment.The rated voltage220/240volts,50Hz,1-ph A.C the fan assemble should consist of down rod ,blades,shackle canopies etc and with double ball bearing system as per S.I.No. 1501(ii) 50 Wiring point for plug with 1.5 sq. mm FRLSH PVC insulated multistrand single core copper conductor cablein PVC conduit pipe partly concealed In wall, and partly laid in slab along with the reinforcement before concreting complet with 1.5 Sq. mm FRLSH PVC inslulated multistand coper conductor cable as earth wire drawn inside conduit, piano type switch and socket etc., complete in all respect, including matching color wash. SI No.-141 (C) 51 Supply and fixing of power plug with 15A/250 volt flush type switch and 5 pin 15A/250V flush type universal socket in suitable M.S box of 175mm x 100mm x 50mm size with phenolic laminated bakelite sheet cover 3mm thick fixed with brass machine screw and cup washer. S.I No.- 1139 52 S&F surface/flush mounting 8 ways SPN distribution board with additional metal door without MCB complete in all respect as directed at site by Engineer in charge. SI No.-1024 (A), CAT B 53 Supply and wiring of submain with two number 2.5 sq.mm FRLSH PVC insulated `1100 V grade multistrand single core copper conductor cable in 20 mm dia heavy duty (2mm thick) PVC conduitpartilly concealed in wall, with one No. 1.5 sq.mm FRLSHPVC insulated1100v grade multistrand single core copper conductor cable as earth continuity wire drawn inside the conduit etc,complete in all respects including matching colour wash as per SI No1307C 54 Supply End fixing of 14 amp DP Isolator - CAT B as per item no 1005 A 55 Erection and testing of fan and regulator for room height upto 3.5meters including supply of 3mm thick G.I.Pipe 19mm dia duly painted, complete in all respect as per SI No 1116 56 Supply and Fixing of Electronic Fan Regulator 120-180 V ISI Marked including all coplete as per SI No 1203 A 57 Supply and fixing of LED Street light fitting having die cast aluminium body and diffuser with driver set suitable for 45 watt to 50 watt. Confirming to ip 66 protection complete in all respect. CAT-AA SI NO 1421 58 Supply & fixing of32 Amp DP M.C.B. (10KA) etc.(S.I. NO. 1009 ) Category B 59 Supply and Fixing of LED Tube light batten fitting suitable for upto 1x22 watt LED Tubelight on Surface complete in all respect as per SI No 1413(A), CAT-A 60 LED Bulb 9 watt PESL 61 Supply & fixing of 6 Amp. To 32 Amp SPM.C.B. (10KA) etc.(S.I. NO. 1002 ) Category B 62 Borring 150mm dia bore hole including labour T&P etc requried for proper completion of work 63 Lowering 110 mm dia pvc pipe in bore hole including labour t&p etc requried for proper completion of work 64 ISI Mark or apporve company made pvc pipe 110mm dia 6 kg /cm2 65 Surrounding and packing graded coarse sand in bet ween bore wall & the strainer including supply of coarse sand labour t&p required for proper completion of work. 66 Supply and fixing of 32mm dia pipe G I PIPE 67 ISI MARK 32 MM GI Socket of apporve company made 68 ISI MARK 32 MM GI elbow of apporve company made 69 Supply and fixing of submerssible pump Kirlosker / cromption or equivalent 1 hp isimark 70 single phase isi mark or approved company made 10 amp starter for submersible pump complete 71 Supply and fixing of 2.5 sq. cable for submersible moter pump 72 4 inch dia MS Clamp made with 32x5 mm flat iron withb nut and bolt complete 73 110 mm dia pvc end cap 74 GI Supporting wire 2.5 mm dia 75 Solution for jointing pvc pipe 76 Nylon cloth for strainer including plastic rope cutting hole in pipe etc complete. 77 Printing new letter and figures of any shade with sysnthetic enamic paint black or any other approved colour togive an even shade as per datd book si o 801 . 78 Providing and fixing MS Iron 1.2x0.9m size standared road sign board of 40x40x6 mm angle iron frame with two diagonal of 40x5 mm flate iron an 32x5 mm flate iron around back with 18 gauge black ironsheet of hight2.90 mincluding two coat synthetic enamle paint over one coat of readymix primer and letter writting and fixing m 1;2;4 cement ,coarse sand &20mm stone grit in .45x.45x.5m cc in foundation of sign board complete at size of work.
