Providing Additional 1X10 Mva At 110/11 Kv Power Transfromer Along With Switchgear At 110 Kv S/S Shiraguppi In Kagwad Taluka, Belagavi District,Including Supply Of Equipments / Materials, Erection, Civil Works, Testing And Commissioning On Partial Turn Key Basis.-1 Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work (V1/Pg8/1.14.1) SWG-253.43 2 Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work (V1/Pg8/1.15.1)In ordinary/soft rock without blasting upto 1.5 m depth ssy-2-69.00 E-7.88 F-5.06 rc-18.97 Baffle-23.91 SWG-40.00 nifs- 11.80 10MVA Transformer- 27.38 110KV CLASS Circuit breaker-20.48 110KV 1T1 Station Tower -94.5 33KV tower 3T1 - 94.5 110 KV CT/ PT/NCT - 20.57 110KV LA / PI/HPI-21.36 110KV isolator - 37.45 11KV 2.9 MV AR capacitor bank -8.8 11KV switch gear -132.0 Auxillary transformer platfrom -2.48 9/9.5M RCC pole - 39.06 Lattice type yard lighting -12.15 Earthmat formatiion - 2197 Nitrogen Fire Extinguisher system panel - 2.112 outdoor ACDB - 0.890 3 Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work (V1/Pg8/1.15.1)In ordinary/soft rock Depth exceeding 1.5 m, but not exceeding 3 m 110KV 1T1 Station Tower -69.3 33KV tower 3T1 - 18.9 9/9.5M RCC pole - 2.45 4 Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications. Mix 1:4:8 Using 40 mm nominal size graded crushed coarse aggregates (V1/Pg15/2.1.2) SSY-2-4.31 BFW-2.35 SWG-19.76 RC-0.73 nifs- 0.60 10MVA Transformer- 2.46 110KV CLASS Circuit breaker-1.364 110KV 1T1 Station Tower -6.3 33KV tower 3T1 - 5.46 110 KV CT/ PT/NCT - 2.04 110KV LA / PI/HP-1.92 110KV isolator - 3.43 11KV 2.9 MV AR capacitor bank -0.8 11KV switch gear -8.8 Auxillary transformer platfrom -0.2487 9/9.5M RCC pole - 2.48 Lattice type yard lighting -1.81 Nitrogen Fire Extinguisher system panel - 0.192 outdoor ACDB - 0.096 5 Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing, form work, centering & scaffolding and all the other appurtenances required to complete the work as per technical specifications (V1/Pg15/2.2.1) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates For foundation add at 3% SSY-2- 6.25 BFW-4.86 NIFS-0.72 SWG-37.52 Road Crossing-i- 3.05 10MVA Transformer- 30.62 110KV CLASS Circuit breaker- 6.008 110KV 1T1 Station Tower - 33.11 33KV tower 3T1 - 23.17 110 KV CT/ PT/NCT - 12.32 110KV LA / PI/HPI-7.25 110KV isolator -13.3 11KV 2.9 MV AR capacitor bank- 4.4 11KV switch gear -52.96 Auxillary transformer platfrom - 0.340 9/9.5M RCC pole - 35.34 Lattice type yard lighting - 7.38 Nitrogen Fire Extinguisher system panel - 3.84 outdoor ACDB -0.588 6 Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing, form work, centering & scaffolding and all the other appurtenances required to complete the work as per technical specifications (V1/Pg15/2.2.1) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates For foundation of retaining wall add at 10% for formwork D-TYP-17.22 NIFS-0.89 RC-4.05 7 Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing, form work, centering & scaffolding and all the other appurtenances required to complete the work as per technical specifications (V1/Pg15/2.2.1) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates For CABLE duct walls add at 35% SWG-14.39 8 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing, form work, centering & scaffolding and all other appurtenances required to complete the work as per technical specifications. (V1/Pg16/2.5.1)M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates For Roof slab add at 50% - Ground floor SWG-2.22+12.13 SSY-D-2.77 NIFS-0.33 RC-3.05 9 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing, form work, centering & scaffolding and all other appurtenances required to complete the work as per technical specifications. (V1/Pg16/2.5.1)M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates For columns of super structure add at 70% Ground floor swg-1.73+0.81+4.59 BFW-3.80 10 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing, form work, centering & scaffolding and all other appurtenances required to complete the work as per technical specifications. M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates For Beams & lintels add at 60% Ground floor BFW-2.05 swg-7.16 11 Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, form work, centering & scaffolding and all the other appurtenances required to complete the work as per technical specifications. Mix 1:3:6 Using 20 mm nominal size graded crushed coarse aggregate for DPC sill coping & screed concrete add at 5% (V1/Pg15/2.14) 12 Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing, form work and all other17 Item No. Description of Item Unit Rate Rs. appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement to be paid separately) Mix 1:2:4 (M15) Using 20 mm nominal size graded crushed coarse aggregates. ( for sill, coping, screed concrete etc + 3% extra for form work) (Vol-1,I.No 2.4.1 P.No 17) SWG:-12.00 13 Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand) (V2/Pg9/5.4) SWG-0.00 14 Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. (V2/Pg14/6.8) BFW-10.22 swg-27.00 15 Providing 20 mm cement plaster of mix :1:4 (1 cement: 4 fine sand) to brick/stone masonary including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge (V2/Pg41/8.3.1) BFW-95.31 NIFS-17.80 16 Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67 ltr/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matterincluding preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. (V2/Pg46/8.30) BFW - 95.31 17 Providing and laying 52 mm thick cement concrete flooring with concrete hardener topping, under layer 40 mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) and top layer 12 mm thick cement hardener consisting of mix 1:2 (1 cement hardener mix : 2 graded stone aggregate 6 mm nominal size) by volume, hardening compound mixed @ 2 L per 50 kg of cement or as per direction of Engineer incharge swg-77.49 18 Providing 12 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix: 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. (V2/Pg42/8.1.1) SWG-101.91 19 Providing 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix: 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. (V2/Pg42/8.5.2) SWG-181.53 20 Providing Flush/ Ruled pointing: Pointing on stone work with cement mortar 1:3 (1 cement : 3 fine sand) after raking joints to depth nicely lining, including cost of materials, labour, curing as per specifications and asper directions of Engineer-in-charge. (V2/Pg44/8.19.1) 21 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. (V1/Pg7/1.9) SSY-8.44 E-7.00 F-4.63 BFW-16.38 SWG-178.96 nifs-8.00 110KV CLASS Circuit breaker-13.08 110KV 1T1 Station Tower -124.46 33KV tower 3T1 - 84.7 110 KV CT/ PT/NCT - 12.65 110KV LA / PI/HPI-10.26 110KV isolator - 27.51 11KV 2.9 MV AR capacitor bank -5.2 switch gear -70.28 Lattice type yard lighting -4.0 earth mat-1464 22 Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer-in-charge. (Made of G.I. wire of dia 4 mm (V2/Pg95/11.58) 23 Fencing with G.I. barbed wire Angle iron post placed at required distance embedded in cement concrete blocks, every 15th post, last but one end post and corner post shall be strutted on both sides and end post on one side only and provided with horizontal lines and two diagonals interwoven with horizontal wires, of barbed wire weighing 9.38 kg per 100 m (minimum), between the two posts fitted and fixed with G.I. staples, turn buckles etc. complete. (Cost of posts, struts, earth work and concrete work to be paid for separately). Payment to be made per metre cost of total length of barbed wire used. (V2/Pg95/11.57.1) With G.I. barbed wire 24 Steel Fabrication: Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification All other type of structures (V1/Pg18/2.11h) SSY-2-1404.67 kg BFW-892.50kg NIFS-355.00 RC-863.33 10MVA Transformer- 851.4kg 110KV CLASS Circuit breaker-420.48 110KV 1T1 Station Tower -2074 33KV tower 3T1 - 1486.6 110 KV CT/ PT/NCT - 456.4 110KV LA / PI-/HPI-374.4 110KV isolator - 589.68 11KV 2.9 MV AR capacitor bank -217.3 11KV switch gear -1947.2 9/9.5M RCC pole - 1269.76 Lattice type yard lighting -267.84 Nitrogen Fire Extinguisher system panel - 48.9 outdoor ACDB - 19.27 CRB-4.00 25 Providing and fixing Structural Steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. (V2/Pg77/11.2) SSY-D-1085.37 swg- 2336.50 RC-107.00 26 Providing and fixing stainless steel (Grade 304) railing made hollow tubes channels platers etc., including welding griing buffing poloshing and making curvature and fitting he same with necessary accessiries and stainless steel nut and bolts complete i/c ficinf the railining with necessary accessories and fasteners stainless steel bolts etc., with suitable arrangements as per approval Engineer in charge ( for payments purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts bolts) 27 Steel Fabrication: Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification Buildings (V1/Pg18/2.11a) SWG-7837.82 28 Jelly Spreading (20-25 mm) : Supplying and providing jelly in the station yard of uniform thickness of 100 mm including the cost of materials, labour charges, required tools and plants etc., complete. Work shall be carried out as per the instructions of Engineer in-charge of works as per the standard procedure.(V6/Pg158/1) 29 Providing S&S RCC SPUN / VIBRATED CAST PIPES (REINFORCED) pipes NP-3 Class conforming to IS:458-1988 with latest amentments using ordinary portland cement, for sanitary works and conveying to work site, rolling and lowering into trenches, laying true to line and level including loading and unloading at both destinations and jointing of pipes and specials, perfect linking of joints with jack to correct position including cost of jointing materials, i.e, rubber rings conforming to IS: 5382 for S&S RCC pipes, with all leads and lifts as directed and giving necessary hydraulic test as per ISS to the required pressure and commissioning etc. complete. (Contractor will make his own arrangements for procuring water for testing). Before the execution of the work, the contractor shall carry out the survey. RCC NP3 Class pipe of 300 mm dia. for Cable duct E & F Type (V5/Pg188/16.3.2) 30 Construction of brick masonry inspection chambers of internal dimension 450x450mm and depth 600mm(inner dimension) with modular bricks in CM 1:6, bed concrete 150mm thick with 1;3:6, platering 12mm thick with CM 1:4, CC 1:2:4 coping 75mm thick for provding and fixing CI cover and frame with weight to be not less than 38kgs and necessary locking arrangemnets with MS flats and painting with two or more coats with black paint etc. complete as directed by the engineer in charge of work(inspection chamber rate(Rs.4236):-Vol-5, pg 191, item 16.10 + cover & frame rate(Rs.1962):- vol-5, pg-221, item 18.3 31 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :Two coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour completeas per specifications and as per directions of Engineer-in-charge (V2/Pg48/8.41) SWG:260.00 32 Wall painting with plastic emulsion oaint of approved brand and manufacture to give an even shade: one coat on old work including primer coat as per specifications and as per directions of Engineer in charge SWG:101.91 33 Finishing walls with 100% premium acrylic emulsion paint having VOC less than 50gm/ltr and UV resisstance as per IS 15489:2004 Alkali and fungal , dirt resistance exterioir paint with silicon additives new work shade over including prom ing coat exterioi paint @0.90 ltr/10sqm with paint brooming the surface to remove all dirt drops and foreign matters including preparing the surface even and sand paper smooth cost of material labor complete as per specifications and as per directions of Engineer in charge WIRING 34 Point wiring using Copper wire without switch. Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/ gang box,the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. a) Short point up to 3Mtr from tapping point to out let via switch box (V6/P3/Pg5/2.1.1) SWG-7.00 35 Point wiring using Copper wire without switch. Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/ gang box,the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. b) Medium point above 3Mtr up to 6Mtr from tapping point to out let via switch box(V6/P3/Pg5/2.1.2) 36 Point wiring using Copper wire without switch. Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using copper PVC insulated multi strand 2x1.5Sqmm copper wire without switch, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet.( 4/9) - II. Point wiring using class B Materialsc) Long point above 6Mtr up to 10Mtr from tapping point to out let via switch box (V6/P3/Pg5/2.1.3) CRB-3.00 SWG-7.00 37 Concealed Conduit System Supplying heavy gauge PVC conduit pipe ...... mm dia..........mm thick confirming to IS 2509 with suitable size bends, metal/PVC Junction boxes, adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures, run with 18SWG GI fish wirewherever necessary 19/20mm dia 2mm thick (V6/P3/Pg2/1.2.1) SWG-100.00 38 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS 694:201 1.5 sqmm (V6/P3/Pg5/2.3.2) SWG-55.00 39 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS 694:201 2.5 sqmm (V6/P3/Pg5/2.3.3) SWG-110.00 40 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 4-5Way (V6/P3/Pg8/3.4.3) SWG-7.00 41 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box 4 Module (V6/P3/Pg8/3.5.3) SWG-7.00 42 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 16Amps one way switch (V6/P3/Pg9/3.6.7) SWG-7.00 43 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6/16Amps Universal Socket (V6/P3/Pg9/3.6.10) SWG;-7.00 44 Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and C Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898 6-32A SP ((V6/P3/Pg17/5.18.1) SWG;-2.00 45 Supplying of feet -PVC Batten with integrated LED tube LED light fitting 1 x 4 - 36/40 W W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI > 80. Power Input: 220-240V@ 50/60Hz & Power factor >0.9 along with CE approved. 2 years Warranty against any manufacturing defect working under standard electrical condition (V6/P3/Pg43/11.3.3) swg;-14.00 46 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6Amps one way switch (V6/P3/Pg9/3.6.1) SWG;-14.00 47 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6Amps 3 Way Socket (V6/P3/Pg9/3.6.3) SWG;-7.00 48 Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and C Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898 6-32A SP ((V6/P3/Pg17/5.18.1) SWG;-2.00 49 Concealed Conduit System Supplying heavy gauge PVC conduit pipe ...... mm dia..........mm thick confirming to IS 2509 with suitable size bends, metal/PVC Junction boxes, adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures, run with 18SWG GI fish wire wherever necessary 25mm dia 2mm thick SWG-100.00 50 Supplying 6A flush type socket and 6 A flush type SP switch either surface/flush mounting in existing gang box or in 4mm thick plastic sheet and fixing over a flush mounted wooden box and wiring using necessary capacity wires as required as per IS 1293 and IS 3854. 6A 2 Way (V6/3.1.1) 51 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 1-3Way 52 Fixing all types and all capacities of fluorescent /false ceiling / spot light / CFL / LED fittings indoor on the wall/ ceiling / rafters / girders using 23/0.0076 twin twisted PVC insulated wires, required Nos of round blocks and clamps.
