Construction of various works for Development of Jain Dharmaguru Samadhi stahala in SV. No. 06 (khandoba Tekdi) at Deulgaon Raja-Excavation for foundation in earth, soil of all types, sand, grave and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5 m.) Spec. No.: Bd.A.1/Page No.259 Excavation for foundation in hard murum including removing the excavated material upto distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.50 m) Spec. No.: Bd.A. 2/Page No. 259 Excavation for foundation in Soft rock and old cement or lime masonry foundations including removing the excavated material upto a distance of 50 metres beyond the building area and stacking as directed, including dewatering, preparing the bed for the foundation and necessary back filling with available earth /murum, ramming, watering including shoring and strutting etc. complete (lift upto 1.5m) Spec. No.: Bd.A. 4/Page No. 259 Providing soling using 80 mm size trap metal in 15 cm. layer including filling voids with Crushed sand/grit, ramming, watering etc. complete. Spec. No.: As directed by Engineer-in-charge. Providing and laying Cast in situ/Ready Mix cement concrete in M-10 of trap/granite/quartzite/ gneiss metal for foundation and bedding including bailing out water, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand Spec. No.: Bd.E. 1/Page No. 287/I.S. 456 (2000) Providing and laying in situ/Ready Mix cement concrete M-20 of trap/granite/quartzite/ gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc. including bailing. out water, formwork, laying/pumping cover blocks, compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) etc. complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand Spec. No: Bd. F.3/Page No.298/1.5.456 (2000) Providing and casting in situ cement concrete of required grade of trap/granite/quartzite/gneiss metal for R.C.C. columns as per detailed design and drawings or as directed, including steel centering, plywood/steel formwork, compaction, finishing uneven and honeycombed surface with C.M. 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening the surface if special finish is to be provided and curing etc. complete. Including use of plastisizer wherever necessary as directed by Engineer (Excluding reinforcement, including cover block). The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed) spec. No.: Bd.F.5/Page No. 300/1.5. 456(2000) GF Providing and casting in situ cement concrete of required grade of trap/ granite/quartzite /gneiss metal for R.C.C. beams and lintels as per detailed design and drawings or as directed, including steel centering, plywood/steel formwork steel props, compaction, finishing uneven and honeycombed surface with C.M.1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete. Including use of plastisizer wherever necessary as directed by Engineer-In-charge (Excluding reinforcement, including cover block). The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed) Spec. No.: Bd. F.6/Page No.300/I.S. 456 (2000) GF Providing and laying Cast in situ/Ready Mix cement concrete M 20 of trap/granite/quartzite/gneiss metal for R.C.C. chajja as per detailed design and drawings including centering, formwork, cover blocks compacting, curing, finishing and roughening the surface if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand Spec. No.: Bd.F.9/Page No.303/I.S. 456 (2000) GF / Providing and casting in situ cement concrete of required grade of trap/granite/quartzite /gneiss metal for R.C.C slabs and landings as per detailed design and drawings including steel centering, plywood/steel formwork, steel props, compaction, finishing uneven and honeycombed surface with C.M. 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening the surface if special finish is to be provided with fan hook box of 2 mm thick M.S.Sheet rectangular size 180 mm x 100 mm with required depth, with holes or notches, as required, bottom and top lids of 1.6 mm thick M.S.Sheet [Spec.No. :Bd.F.8 Page No. 302/IS:456(2000)] GF / Providing and laying Cast in situ/Ready Mix cement concrete in M-20 of trap/granite/quartzite/ gneiss metal for R.C.C. pardi of required thickness including centering, formwork, cover blocks, laying/pumping, compacting, curing, finishing and rougheningthem if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand Bd.F.11 Page No. 304 and B.7, Page No. 38 GF Providing and fixing in position reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams and columns, canopies, staircases, newels, chajjas, lintels, pardies, coping, fins, arches etc. as per detailed design and drawings and schedules including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required completed. Spec. No.: Bd.F.17/Page No.306 GF /Filling in plinth and floors with approved excavated material in 15cm. to 20cm. layers including watering and compacting etc. complete. Spec. No.: Bd.A. 10/Page No. 262 Available Borrow Providing and laying Cast in situ/Ready Mix cement concrete 15 of trap/ granite/quartzite/gneiss metal for coping to plint or parapet, moulded or chamfered as per drawing or directed including steel centering, plywood/ ste formwork compacting, roughening them if special finish is be provided, finishing uneven and honeycombed surface am curing etc. complete. The Cement Mortar 1:3 plaster considered for rendering uneven and honeycombed surfac only. Newly laid concrete shall be covered by gunny ba plastic, tarpaulin etc. (Wooden centering will not be allowed. GF Spec. No.: Bd.E. 3/Page No. 288/I.S. 456 (2000) Providing second class Burnt Brick masonry wit conventional/ I.S. type bricks in cement mortar 1:6 foundations and plinth of inner walls/ in plinth external wal including bailing out water manually, striking joints o unexposed faces, raking out joints on exposed faces an watering etc. Complete. Spec.No.: Bd.G.1/Page No.313 GF Providing second class Burnt Brick masonry with conventiona I.S. type bricks in cement mortar 1:6 in super structur including striking joints, racking out joints wateringan scaffolding complete. Spec. No.: Bd.G.5/Page No.315 GF Providing internal cement plaster 12 mm thick in a single coa in cement mortar 1:4 without neeru finish to concrete or bric surface in all positions including scaffolding and curin complete. Providing groove at joint of B.B.Masonry an concrete members complete. Spec. No.: Bd.L.2/Page No.368 GF Providing internal cement plaster 6 mm thick in a single coat i cement mortar 1:4 without neeru finish to concrete surface i all positions including scaffolding and curing etc. complete. Spec. No.: Bd.L.1/Page No.368 GF Providing and applying putty to new plastered surfaces in tww coats to receive approved paint in all positions including a materials, labour scaffolding and curing etc. complete. Spec.No.: As directed by Engineer incharge.] GF Providing and applying primer coat for wall surface to receive Dil bound distemper treatment. GF Spec. No.: As directed by Engineer incharge.] Providing and applying plastic emulsion paint of approvec old quality, colour and shade to andnewsurfacesintwocoatsincludingscaffolding, preparingthesu face. (excluding the primer coat) etc. complete. Bd.P.6 Page One Number 414 Providing sand faced plaster for external portion in cemen mortar using Kharsalia / Kasaba or similar type of sand, in a positions including base coat of 15 mm. Thick in C.M. 1:4 using water proofing compound at 1 kg per cement bag, curing the same for not less than 3 days and keeping the surface o the base coat rough to receive the sand faced treatment 6 to mm thick in C.M. 1:4 finishing the surface by taking out grains making grooves and curing for fourteen days scaffolding etc complete. (Spec.No. :Bd.L.7 Page No. 369] GF Providing and applying two coat of Polymer based externa weatherproof paint of standard manufacture like Apexfrom Asian paints, Excel from Nerolac paints ofapproved colour to the plastered surfaces including scaffolding if necessary cleaning and preparing the surface etc. for specified buildings complete.(including primer coat )(Prior specific permission o S.E. shall be obtained before inclusion of this item in the estimate.) Spec.No.: As directed by Engineer-in-charge. GF Providing and fixing Z-type (Staggered) steel ventilator fully glazed with Z-section of 10 gaugeand MS mesh of 12 gauge (opening 25 x 25) as per detailed drawing with outer frame o Z-section including two 12 mm square bar in each pane fabricating,glazing with 6 mm thick wire glass and of approved type and quality and fasteningand oil painting two coats etc. complete. .[Spec.No.: As directed by Engineer-in-charge.]I Spec. No.: As directed by Engineer-in-charge GF Providing and fixing frame with/without ventilator of size as specified with Non C. T. wood for doors and windows including chamfering, rounding, rebating, iron holdfast of size 300mm x 40mm x 5mm with oil painting, etc. complete Spec. No.: As directed by Engineer-in-charge. GF Providing and fixing CTW single leaf panelled door shutter without fanlight and shutter 35 mm thick as per drawing consisting of T.W. top rail size 100mm x 35 mm and bottom and lock rail 200mm x 35mm insert panel 12 mm thick commercial ply faced T.W. particle board with phenol formaldehyde synthetic resin (Generally confirming to ISI 3097) excluding frame, including stainless steel fixtures fastening and T.W. beading at junction of panels inserts and as instructed by the Engineer in charge including 3 coats of oil painting etc. complete. Spec. No.: As ddirected by Engineer incharge GF Providing and fixing in position. (as per 1.5.1868/1982) Aluminium sliding window of two tracks with rectangular pipe having overall dimension 63.50 x 38.10 x 1.02 mm at weight 0.547 kg/Rmt. and window frame bottom track section 61.85 x 31.75 x 1.20 mm at weight 0.695 kg/Rmt. Top and side track section 61.85 x 31.75 x 1.30 mm at weight 0.659 kg/Rmt. The shutter should be of bearing bottom 40 x 18 x 1.25 mm at weight 0.417 kg/Rmt. Inter locking section 40 x 18 x 1.10 mm at weight 0.469 kg/Rmt. And handle section 40 x 18 x 1.25 mm at weight 0.417 kg/Rmt. and top section 40 x 18 x 1.25 mm at weight 0.417 kg/Rmt. As per detailed drawings and as directed by Engineer in charge with all necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5 mm thick plain glass with all required screws and nuts etc, complete. With powder coating without box Spec. No.: As directed by Engineer in-charge. GF Providing and fixing in position aluminium partly openable and partly fixed window of any size as per detailed drawing and as directed by Engineer in chrge with all necessary alluminium sections including necessary fixtures and fastening with 5 mm thick float glass etc. complete. b) With powder coating Note While arriving at the rate of item of item weight at 6.90 Kilogram/One Square Metre is considered. Spec. No.: As directed by Engineer in-charge. GF Providing and fixing mild steel grill work for windows, ventilators etc. 20 kg/sqm as per drawing including fixtures, necessary welding and painting with one coats of anticorrosive paint and two coats of oil painting complete. Spec.No.: As directed by Engineer-in-charge GF glossy finish tiles Providing and laying vitrified mirror decorative type having size 590 mm to 605 mm x 590 mm to 605 mm of 8 to 10 mm thickness and confirming to IS. 15622-2006 (group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and clearing etc. complete. a) Flooring GF Providing and laying ceramic tiles of having size 30 cm. x 30 cm. and confirming to corresponding 1.5. for dado and skirting in required position with readymade adhesive mortar of approved quality on plaster of 1:2 cement mortar including joint filling with white/ colour cement slurry cleaning curing etc. complete. Bd. M.13 Page Number 386. Providing and laying 25 mm. thick precast polished chequere cement tiles for treads of size 20 cm. x 32 cm, and 20 mm Thick plain cement tiles for risers of steps and staircase wit nosing of treads moulded as per drawing or as directed on bed of 1:4 cement mortar in required positions includin cement float filling joints with neat cement slurry, curing polishing and cleaning complete. GF Providing and fixing 1st class white glazed earthenwar-Orissa Type W.C. Pan 580 mm dia including Por Strap cas iron soil and vent pipe upto the outside face of the wall (1:5: 0) cement concrete bedding 15 mm thick, 10 liter P.V.C flushing cistern with all necessary pipe connection etc complete. Spec. No.: As directed by Engineer in-charge. Providing and fixing European type white glazed earthenware coupled closet symphonic trap with symphonic low levell white glazed 10 litres cistern wih black back lite seat with all necessary pipe connection etc. complete. Spec. No.: As directed by Engineer in-charge. Providing and fixing 8 cm rigid PVC Nahani trap including PVC grating, bend, connecting piece of UPVC pipe up to the outside face of wall,making the good damaged surface and testing etc. complete (Prior approval of sample and brand by Ex Engr. is necessary before use) Spec.No.: As directed by Engineer-in-charge Providing and constructing Brick Masonry Inspection Chamber 60cm x 45cm x 90cm including 1:4:8 cement concrete foundation 1:2:4 cement concrete channels half round G.S.W. pipes, Brick Masonry, plastering from inside and with frame fixed in cement concrete with R.C.C. Cover medium duty 140 kg with frame etc complete. Spec. No.: Bd.V.43/Page No.574 Providing and laying in trenches following mm dia. CPVC pipe including necessary excavation, fittings. Refilling trenches etc. complete Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. [Spec.No. :Bd.V.5 Page No.551] A) 40MM DIA. PIPE B) 25MM DIA. PIPE C) 15MM DIA. PIPE Providing and fixing push cock (Self closing tap) symet type of 15 mm dia. including necessary socket, testing etc. complete. Spec.No.: Bd.V.8/Page No.554 Providing and fixing following mm dia stabiliser pipe/ P.V.C. soil vent/waste pipe and with necessary fixtures and fitting. such as bends, tees, single junctions, slotted vent, clamps etc. complete A) 110 mm Dia Providing, hoisting and fixing in position of approved make high density polyethylene UV stabilized conforming to 1.5.12701, water storage tank with necessary connections, testing etc. complete. (Prior approval of sample by Ex. Engineer is necessary before use.) F. F. Spec.No.: As directed by Engineer-in-charge. Providing soak pit of size 120cm x 120cm x 120cm including excavating and filling with brick-bats. Spec.No.: Bd.V.46/Page No.576 Providing and fixing White Glazed Earthenware Squatting plate (Ladies Urinal) with P.V.C. flushing cistern of 5 liters capacity with fitting, inlet pipes and stop tap, brackets for fixing the cistern, 32 mm dia. P.V.C flush pipe with fittings and flushing arrangement including lead soil pipe, lead trap, soil pipe connection upto the outside face of the wall Bd.V.23 Page Number 562 Providing and fixing white glazed earthen ware lipped flat back/ corner type Urinal with PVC 5 liters flushing cistern with fittings, inlet pipe with stop tap, brackets for fixing the cistern, 32 mm diameter P.V.C. flush pipe with fitting including lead soil pipe, lead trap and soil pipe connection up to the outside face of wall. Bd.V.26 Page Number 564 Providing and fixing white glazed earthen ware Wash Hand Basin of 55 cm.x 40 cm. size including cold water pillar tap/cold and hot water pillar tap brackets, rubber plugs and brass chain, stop tap and necessary pipe connections including P.V.C. waste pipe and trap up to the outside face of the wall. Making good the damaged surface, testing etc. complete. Bd.V.30 Page Number 565 Providing and fixing 450 mm x 550 mm size superior type Belgium mirror with 16 mm dia. nickel plated towel rod etc. complete. As directed by Engineer incharge. Providing and fixing Stainless steel grill railing 20 kg/sq.m with teak wood hand rail of size 75mm x 60 mm.and sill of 75mm.x 25 mm.and newel posts for staircases, ncluding fabricating, fix-tures, erecting, painting the grill work with one coat of anti-corrosive paint and two oats of oil painting with approved colour and polishing the sill, hand rail and the newel post with french polish. Bd. U.2 Page No. 537 GF Providing, supplying, fabricating and fixing panel of aluminium composite panel cladding in approved shape made out of mm thick ACP sheet material consisting of 3 mm thick F grade mineral core following NBC part IV Fire and life safety (having 2 hours fire resistance in accordance to ASTME 119-12 and BS 476 part 6 and 7 class O) sand witched between two aluminium sheets (each 0.5 mm thick of AA 5005/AA 3105 grade) The aluminium composite panel cladding sheet shall be coil coatec with kynar 500 based PVDF/ Lumifl on based fluropolymerres in (having 70:30 ratio of PVDF and acrylic) coating of approvec colour and sg hade on top face and polymer (service) coating of bottom face as specified using stainless steel screws, nuts, bolts, washers, cleats, weather silicon sealent, back errods etc. overall weight of the ACP shall not be less than 7.5 Kilogram/One Square Metre) As directed by Engineer-in-charge Providing and applying water proofing treatment using acrylic polymer modified cement based water proofing coating with fibre glass mesh mixing at the rate of powder to liquid (2:1) by weight covering 9 to 10 Square Metre/Kilogram with two coat using approved chemicals for masonry and concrete surface by brush covering 7 years guarantee on Stamp Papers etc. complete. Providing and fixing colour coated Zincalume (R) AZ150 (min 150 gms/sq.mt. total on each side) profiled sheets for roofing. The feed material is manufactured out of nominal 0.45 mm Base Metal Thickness (BMT) (0.5 mm TCT), Hi-strength steel with min.550 MPa yield strength, metallic hot dip coated with Aluminium-Zinc alloy (55% aluminium 43.4% zinc 1.6% silicon) with COLORBOND (R) steel quality super durable polyester paint coat (with inorganic pigment). The paint shall have a total coating thickness of nominal 35 um, comprising of nominal 25 um exterior coat on top surface and nominal 10 um reverse coat on back surface. Profile sheet shall have nom. 950-1050 mm effective cover width and nominal 25-30 mm deep ribs with subtle square fluting in the five pan at nominal 180-As directed by Engineer in charge. Providing structural steelwork in trusses, other similar trussed purlins and members with all bracing, gusset plates etc. as per detailed designs and drawings or as directed including cutting, fabricating, hoisting, erecting fixing in position, Making riveted/bolted/ welded connection and one coat of anti corrosive paint and over it 2 coats of oil painting approved quality and shade etc. complete. Bd.C.8 Page One Number 278 Providing and fixing heavy duty inter locking concrete Rubber mould glossy paving blocks of 80 mm thickness of having a strength of 400 kg/Sq.cm. of approved quality and shape on a bed of crushed sand of 25 to 30 mm thick including skirting joints and cleaning etc. complete. (using 100% crushed sand) 80 mm thick in M40 concrete grade Rubber moulded Information Board Material Testing Charges Cement/Basic test Sand/Fin. Mod. / Silt & Clay Content CC M-20/Comp. Strength Steel Bar-Test Bricks/Water Abs./Comp. Str./Efflorescence Royalty Charges
