Tender For Special Repair To Building No P-201 (Adm Block) Of 12 Jat At Bhagat Lines Under Age B/R-Iii And Age E/M-Ii Of Ge (South) Meerut Cantt.; 1 Demolition ofbrick work or stone/boulder masonary built in cement mortar incl all quoins arches pillars etc complete all as specified & directed. 2 M&L Brickwork with sub class B bricks, straight or curved on plan exc 6m mean radius, built in CM 1:6 complete all as specified & directed. 3 M&L Brickwork with subclass `B bricks, straight or curved on plan exc 6m mean radius, built in CM 1:6 but except bricks complete all as specified & directed. 4 M&L Brickwork withsub class B bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 etc complete all as specified & directed. 5 Demolition of cement concrete in ground floor not exceeding 15 cm in depthin any position not otherwise specifically provided for. complete all as specified & directed. 6 Taking down old existing water proofing treament from the top of RCC/arch slab, including taking down existing PCC padding or plaster and hacking the top of RCC slab, cleaning with water, including completely removing of existing vegetation growth alongwith its roots and disposal of rubbish off the premises complete all as specified & directed. 7 M&L 20mm thick screed bed in CM 1:4 as on roof surfaces mixing withwater proofing compound (WPC) @ 200ml per 50 Kg of cement consumed or as per manufacturers instruction complete all as specified & directed.Note-: WPC shall be measured & paid separately under Supply only Item of Sch A, 8 M&L for cleaning of concrete or plastered surfaces of roof and applying priming coat using with bituminous primer @ 0.30 kg/sqm followed evenly by a tack coat @ 1.20kg/sqm using 85/25 grade industrial hot blown bitumen, over it laid with 3mm thick APP modified polymeric water proofing membrane weight 3.6 kg/sqm reinforced with non-woven polyster fabric (weight not less than 160 gm/sqm) unrolled & bonded to substrate with side and end laps 75mm & 100mm as per manufcturers instruction and applying over it a tack coat using 85/25 grade industrial hot blown bitumen @ 1.20kg/sqm and finally finished the top of polymeric water proofing membrane with a coat of bitumen aluminium paint @ 0.20kg/sqm as per manufacturers instructions. Complete all as specified and directed. 9 Supply only liquid waterproofing compound complete all as specified & directed. 10 Dismantling, floor, hearth or wall tiling including cement mortar bedding but not backing and removing rubbish off the premises. Complete all as specified and directed. 11 Material & labourNon - skid coloured ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match in floor over and including 15mm thick cement screed bed of CM (1:6) complete all as specified & directed. 12 Material & labour non-skid coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match in floor over and including 15mm thick cement screed bed of CM (1:6)complete all as specified & directed. 13 Material & labour for Glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed inneat cement slurry and pointed in white or colour cement to match the existing surfaces laid over and including 10mm thick rendering in CM 1:4, complete all as specified and directed. 14 M & L machine cut kota stone slab, 18-20mm thick as in flooring, over and including 15mm thick cement screed bed in 1:6, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing, polishing etc complete all as specified & directed. 15 M & L machine cut kota stone slab, 18-20mm thick as in steps, skirting, dado and pillar, cill etc, over 15mm thick cement screed bed in 1:6, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing, polishing and bull nosing for trade of steps etc complete all as specified & directed. 16 Taking down cement or lime plaster on brick or stone walls, etc including racking out joints, hacking for key, scrbbing down with water etc complete all as specified & directed. 17 M & L 10 mm thick rendering in CM 1:6 on fair faces of brick or concrete surfaces finished even and fair complete all as specified & directed. 18 M & L 15 mm thick rendering in CM 1:4 on fair faces of brick or concrete surfaces finished even and fair complete all as specified & directed. 19 M&L Rendering 5 mm thick in cement mortar (1:3), on fair faces of concrete surfaces, finished even and smooth, over and including fixing of chicken wiremesh before plastering on ceiling complete all as specified & directed. 20 Taking down of chowkhat with shutter (without taking off shutters from the frame) area not Exceeding 1.50 sqm each complete all as specified and directed. 21 All as per item No 20.00 here-in-before but area Exceeding1.50 Sqm butnot exceeding4.0 Sqm each complete all as specified and directed. 22 S&F, Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified & directed. 23 All as per item No 22.00 here-in-before but without glazing bars complete all as specified & directed. 24 S&F pressed steel frames for doors with one or more rebates including necessary fitting lugs, hinges, lock strike plates etc completed size of frame 125x60mm (suitable for both side shutter) made out of 1.25mm mild steel sheets complete all as specified and directed. 25 Material and labour for PCC 1:3:6 type C-1 (20mm graded agg) filling in pressed door chowkat/hold fast blocks complete all as specified and directed. 26 Supply and fixing plain framed panelled shutter 35mm thick of 2nd class hardtwood, (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkatsist complete all as specified & directed. 27 S&F, Glazed and skeleton shutters of 2nd class hard wood, 30mm thick, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a) supplied and fitted to chowkats complete all as specified & directed. 28 Supply and fixing for 125mm long but hinges heavy duty cold rolled mild steel medium weight complete all as specified & directed. 29 Supply and fixing for aluminium anodised barrel tower bolts of extruded section and fixed of 200mm long complete all as specified & directed. 30 Supply and fixing for aluminium alloy anodised sliding door bolt 300mm long with haps staple bolt type and fixing clips of sheet etc complete all as specified & directed. 31 Supply and fixing for 200mm long aluminium handles cast type anodized complete all as specified & directed. 32 Supply and fixing for 300mm mild steel ordinary rat tail rod pattern spring Including roller & roller plate complete all as specified & directed. 33 S&F, 150mm Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified & directed. 34 Supply & fix 3mm thick sheet glass, ordinary quality glazing with oil putty or fixed with wooden beads or in steel windows in square n.exc. 0.50sqm each pane Including one coat of synthetic enamel paint to oil putty complete all as specified & directed. 35 Supply & fix galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanized wire staples complete all as specified & directed. 36 S & F for Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/Chowkhat of size 65 x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof,water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete including 03 Nos SS butt hinges 100mm, 02 Nos aluminium tower bolt 150mm in each door as per direction of Engineer-in-Charge. 37 S & F for 30mm thick Factory made single extruded WPC (Wood Polymer Composite) solid Moulded WPC door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N edge),minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws complete all as specified & directed.Note: stainless steel butt hinges and necessary S S screws shall be paid separately) 38 M&L preparation of new or previously untreated wooden surfaces of any description, not other wise described over 10cm width or girth and apply two coat of synthetic enamel paint over and includinga coat of pink primer (by spraying) complete all as specified & directed. 39 M&L preparation of new or previously untreated steel surface of any description over 10cm width or girth and applying two coat of synthetic enamel (by spraying) over a coat of red oxide complete all as specified & directed. 40 Taking up or down steel tubing and connection 15 mm bore pipe and removing from site complete all as specified & directed. 41 All as Item No 40.00 here-in-before but 20 mm bore pipe. complete all as specified & directed. 42 S&F 15 mm bore, Unplasticised PVC pipes of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc. complete all as specified & directed. 43 All as per item No 42.00 here-in-before but 20 mm bore pipe. 44 S&F Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including nipple nuts and washers for fixing inlet, outlet/washout pipes and air vent pipes, 20mm dia gate valve, etc and Including dismantling water tanks & removing complete all as specified & directed. 45 S&F 20 mm dia ball brass valves, high pressure with polythene float and fly nut complete, screwed for iron pipe or for brass ferrule complete all as specified & directed. 46 Supply and fixing in repair sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs washers and wasters incl bedding in cement mortar to dwarf walls or incl fixing cantilever brackets and connecting union to pipe over all size (915mmx460mm bowl size 410x330x160mm) complete all as specified & directed. 47 Supply and fixing in repair 15mm bore bib tap fancy type chromium plated long body cast copper alloy screwed down for iron pipes or for brass ferrule complete all as specified & directed. 48 Supply and fixing in repair 15mm bore pillar taps cast copper alloy fancy type chromium plated screwed down high pressure with or without lettered HOT or COLD with long screwed shanks and fly nuts screwed for iron pipes complete all as specified & directed. 49 Supply and fixing in repair 15mm bore stop valve/angle valve fancy type chromium plated cast copper alloy screwed down high pressure screwed both ends for iron pipe or for union complete all as specified & directed. 50 Supply and fixing PVC connections 15mm bore, 450 mm length with PTMT nuts complete all as specified & directed. 51 S&F brass chromium plated tubular towel rail, 20 mm dia, D type, 60 cm long between flanges complete all as specified & directed. 52 S&F stainless steel 3mm thick soap dish/plate of size 300 x 100mm, with impression/mould for soap, paste etc alongwith adequet perforations, holes for tooth brush complete all as specified and directed. 53 Supply and fixing in repair PVC valveless, syphonic action type, flushing cistern, 10 ltr capacity, low level, white, with inlet, ball valve, float and handle including brackets and PVC bend including connection to IWC/EWC and fixing on wall with brackets complete all as specified & directed. 54 Supply and fixing in repair vitreous china wash down water closet pan (Pedestal Pattern) white (excluding flushing cistern and flush pipe) including plastic water closet seat white/black, connection to out going pipe and flushing pipe complete all as specified & directed. 55 S&F in repair plastic water closet seat cover, white/black, closed pattern with flat bottom and mild steel chromium plated or aluminized hinging device complete all as specified & directed. 56 Supply and fixing in repair vitreous china squatting pan white orissa pattern size 580x440mm with integral foot rests (excluding flushing cistern & flush pipe) with cast iron P trap including lime concrete bedding and making good the disturbed portion to match with the existing surface of floor complete all as specified & directed. 57 Supply and fixing in repair vitreous china wash basin white flat back size 580x 450mm excluding taps but incl 32mm dia CP waste fitting and PVC waste pipe 610 mm long and brackets complete all as specified & directed. 58 Supply & fix in repair vitreous china urinal half stall type with including providing & fixing of plugs bedding against wall in cement mortar 1:2 pointing around urinal back in cement mortar, including Urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms), wast pipe & all necessary fittings complete all as specified & directed. 59 S&F transparent 5.5mm thick glass corner shelf of size 250mm radius, complete with CP grill, bracings/brackets and screws etc complete all as specified & directed. 60 Dismantling wrought iron or mild steel work of any description not otherwise provided for 61 S&F, Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed 62 M&L 75 mm thick cement concrete type C-2, 1:3:6 (40 mm graded aggregate) finished even and smooth without using extra cement as in plinth protection complete all as specified & directed. 63 Preparation of new plastered or unplastered surfaces of wall, and applying 0.5mm to 2mm thick wall care putty, making the surface smooth and applying two coat of oil emulsion distemper using roller complete all as specified & directed. 64 M&L Preparation of New plastered or unplastered surfaces of ceiling and applying two coat of white wash paint complete all as specified and directed. 65 M&L preparation of new plastered or unplastered surfaces of wall and applying two coats of exterior emulson paint (weather proof) using roller over and including 0.5mm to 2mm thick wall care putty, complete all as specified and directed. 66 M&L Preparation of plastered or unplastered surfaces after completely scraping/removing of existing/old treatment of wall, applying 0.5mm to 2mm thick wall care putty, making the surface smooth and applying two coat of oil emulsiondistemper using roller complete all as specified & directed. 67 M&L Preparation of old plastered or unplastered surfaces of ceiling and applying three coat of white wash paint complete all as specified and directed. 68 M&L, Preparation of plastered or unplastered surfaces after completely scraping/removing of existing/old treatment of wall and applying two coats of exterior emulson paint (weather proof) using roller over and including 0.5mm to 2mm thick putty surfaces complete all as specified and directed. 69 M&L for Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping)complete all as specified and directed. 70 M&L for TMT steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified & directed. 71 M&L Reinforced cement concrete (nominal mix) Type B1 1:2:4 (20 mm graded aggregate) as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed. 72 M&L, 75mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed. 73 M&L, 75mm PVC (SWR) multi floor trap, plain with grating including jointing with solvent cement complete all as specified and directed. 74 M&L, PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified and directed. 75 S&F, 110mm dia, PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified & directed. 76 All as per item No 75.00 here-in-before but 75mm dia bore pipe complete all as specified & directed. 77 S&F, 110mm dia, PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to wall complete all as specified & directed. 78 Suply and fix in repair 75mm bore PVC (SWR) bends any redious complete all as specified and directed. 79 Supply & fix in repair75mm bore PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and directed. 80 Suply and fix in repair 110mm bore PVC (SWR) bends any radious complete all as specified and directed. 81 Supply & fix in repair 110mm bore PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and directed. 82 Supply and fixing in repair looking mirror 600x450 mm bevelled edges of selected quality glass mounted on 6mm commercial ply or AC building board with aluminium frame around and fixed to wooden plugs with CP brass screws complete all as specified & directed. 83 M&L, 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over and including 20mm thick screed bed in cm (1:6) complete all as specified & directed. 84 M&L in repair to overhang portion of chajja, facia, dropwall etc. for continuous work by providing PCC(1:2:4) Type B-0 and finished with CM(1:3) after taking down of damaged portion of RCC work by maintaining same level and finished the surface to match with the existing surface by providing same finish. (Height of work to be considered above 3.5m and upto 7m from FFL of Ground Floor.) Complete all as specified and directed.Note : Wherever reinforcement is required to be provided will be paid separately under relevant item and contractor have to inform the Engineer-in-charge one day in advance beforebinding of reinforcement for measurement otherwise no payment will be considered on this account) 85 Taking down carefully any type of battens or conduit point wiringwith or except conduit (light, fan, socket or power) complete including fittings and fixtures such as switches, sockets, ceiling roses, lamp holders, pendent light fittings, MCBs / isolators, fan regulators, tube light fittings etc removing material from site complete all as specified & directed. 86 Material & labour forpoint wiring with FRLSH - Flexible wiring cable conforming to IS: 694-1990 PVC insulated 1.5 Sq.mm nominal cross sectional area, single core, 1100 Volts grade, stranded, unsheathed copper conductor cable in and includingPVC concealed conduit of size 20mm dia or higher, medium grade complete with and including all PVC conduit accessories / fittings, brass screws, washers etc, sunk zinc coated pressed steel terminal boxes including all cutting / chases etc in walls, with 3mm thick plastic laminated sheet cover including continuous earth wire of size 1.5 Sqmm nominal cross sectional area, single core, PVC insulated copper conductor cable, unsheathed and connected to common earth and earth dolly complete all as specified and directed for One Tube light/bulb/street light point controlled by one, one way switch 05 / 06 Amps. 87 All as per item No 86.00 here-in-before but one ceiling fan point controlled by one, one way switch 05 / 06 Amps. 88 All as per item No 86.00 here-in-before but One 3 pin, 05 / 06 Amps socket outlet point on same board controlled by one, one way 05 / 06 Amps switch. 89 All as per item No 86.00 here-in-before but with 2.5 Sqmm nominal cross sectional area copper conductor cable for one 3 pin, 05 / 06 Amps socket outlet point on independent board controlled by one, one way 05 / 06 Amps switch. 90 All as per item No 86.00 here-in-before but with 2.5 Sqmm nominal cross sectional area copper conductor cable for one 15 / 16 Amps socket outlet point on independent board. 91 Supply & fixing switch piano flush type, 05 / 06 Amps single pole, one way 240 volts complete all as specified & directed. 92 Supply & fixing socket outlet 3 pin, 05 / 06 Amps flush type 240 volts complete all as specified & directed. 93 Supply & fixing switch piano flush type, 15 / 16 Amps single pole, one way 240 volts complete all as specified & directed. 94 Supply & fixing of socket outlet5 pin 15 / 16 Amps (2 in 1 Multipurpose) 240 volts complete all as specified & directed. 95 Supply and fixing in repair ofdecorative LED Tube lightfitting 1x20 Watt ,environmental friendly, energy efficient MS batten with retrofit T8 polycarbonateLED tube-01 No, with batten and all accessories complete all as specified & directed. 96 Supply and fix in repair lamp holder , PVC / polycarbonate type back plate suitable for batten fitting complete all as specified & directed. 97 Supply & fixing in repair of ceiling rose, 3 terminal PVC polycarbonate isolated body complete all as specified & directed . 98 Supply and fixing in repair sheet metal enclosure, Triple pole and neutral AC, 415 volts, 04 way, with 200 Amps rated copper bus bar and IP - 43 & IK 09 protection including provision for four pole isolator/mcb as incomer with metal double door and flush to wall including all cutting etc complete all as specified & directed. 99 Supply and fixing Isolator 4 poleB series 100 amps capacity AC 415 V,10kA complete all as specified and directed. 100 Supply and fixing in repair sheet metal enclosure double door, single pole and neutral, AC, 240 volts, 8way, with 200 Amps rated complete all as specified & directed. 101 Supply & fixing in repair MCBSPN, AC, 240 volts of 32 to 63Amps, C curve, 10 kA, complete all as specified & directed. 102 Supply and fixing in repair MCB SP, AC, 240 volts of 06 to 32 Amps, C curve, 10 kA, complete all as specified & directed. 103 Material and labour for sub main wiring with 06 Sqmm nominal cross sectional area, two single core, 1100 Volts grade, stranded, PVC insulated, unsheathed, copper conductor FRLS- FLEXIBLE WIRING CABLE. CONFORMING TO IS: 694-1990 with and including continuous earth wire of size 6.0 Sqmm nominal cross sectional area, single core, PVC insulated, copper conductor cable drawing into and including rigid non metallic PVC concealed conduit of 25 mm dia, medium grade with all MS conduit accessories / fittings, brass screws, washers etc and connected to common earth dolly including all cutting / chases etc in wall, making good to walls etc including two coats of white / colour washing / distempering etc to the disturbed surfaces to match the existing Including taking down old unserviceable submain wire complete all as specified & directed.Note:- One meter of conduit along with 2x6 sq mm wire and one 6.0 sq mm earth shall be measured as one unit length. 104 Supply, laying commissioning, testing of XLPE under ground LT cable 1100 volts grade of size 16 Sqmm 4.0 core armoured, PVC sheathed with aluminium conductor heavy dutyIncluding taking down old unserviceable complete all as specified & directed. 105 Supply / laying and fixing in repair 40mm bore galvanised steel tubes with all fittings, light grade, laid in trenches for cable protection complete all as specified & directed. 106 Excavationin trenches not exceeding 1.5 m wide and not exceeding 1.5 M depth in soft/ loose soil and gating out in soft / loose soil complete all as specified and directed. 107 M&L for washed river dry sand cushioning in trenches 80mm thick before laying the cable and 150mm thick after laying the cable including spreading levelling and hard punning complete all as specified & directed. 108 Material and labour for continuous brick edging withwidth equal to the depth of the brick of whole sub class B bricks laid on edgeIncluding taking down old unserviceable complete all as specified & directed. 109 Returning, filling in, including spreading, leveling, watering and well ramming in layers n. exc. 25cm thick in soft / loose soil complete all as specified & directed. 110 Removing surplus excavated materials n.exc. 50 Mtr and depositing where directed at a level n. exc. 1.5 Mtr above the starting point complete all as specified & directed. 111 Material & labour for earthing complete with galvanised mild steel earth plate electrode 60cmx60cmx6mm thick burried directly in ground (earth pit not less than 2.25mtr deep below ground level) with top edge of the plate not less than 1.5mtr below normal ground level steel earth plate connected with GI wire 04mm dia by means oflug, bolts, nuts, check nuts, washers of galvanised iron or steel GI protection pipe 15mm bore light grade all as shown in elect plate No.5 of SSR part I connecting to main switch board / Main DB’s including excavation, earth work, salt and charcoal dust mixed and packed 150mm thick around GI earth plate, GI pipemedium grade 20mm nominal bore watering pipe GI sheet funnel wire mesh, concrete pit, RCC cover in PCC 1:2:4 type B1 duly reinforced with MS Bars 6mm dia at the rate of 150mm center to center both way with suitable lifting handle and pit / chamber in PCC 1:3:6 type C1 , Angle iron 40x40x5mm frame for pit cover including testing on completioncomplete all as specified & directed. 112 Supply and fixing in repair LED building security light fitting 1x35 Watt luminarieswith die cast aluminium housing comprising epoxy poweder coated enclosed with glass cover in frame with high power LED white lampof capacity 35 watt including making connections complete with bracket fitting made out of GI pipe medium grade including clampsand nuts and bolts complete all as specified & directed. 113 Taking down Ceiling fan and hook , sealing cable end dismantling blades and removing fans and blade to AGE E/M-II store for safe costudy complete all as specified & directed. 114 Supply and fixing new ceiling fans complete with blades, down rods, electronic regulator compatible for BLDC fans and accessories, 230 V, 1400 mm sweep. Min air delivery 245 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor ( BLDC) complete all as specified & directed. 115 M&L for Ceiling fan hook made from steel structural, bracing support bend into shape for hanging of ceiling fan complete all as directed at site complete all as specified & directed.
