Tender For Additional / Alternator To Open Shed At Gt Ground Gandhinagar Under Ge (Af) Chiloda; 1 M&L Brickwork with subclass ‘B’ old size bricks, straight or curved on plan exc 6m mean radius built in CM (1:6) complete all as specified and directed. 2 M&L for formwork to sides and soffits of floor or roof beam, beam haunchings, girders, bressum-mers, lintels, cantilevers, shelves inluding supports, overhangs etc also splays between floor and beams etc,flat & rough finished surface of concrete complete all as specified and directed. 3 S&F Reinforcement steel (TMT Bar)10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. 4 S&F Reinforcement steel (TMT Bar) 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete all as specified and directed. 5 M&L Reinforced Cement concrete (nominal mix) Type B1 1:2:4 (using 20 mm graded aggregate) for Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specfied and directed. 6 Taking down cement plaster on brick or PCC block masonry wall in any description complete all as specified and directed. 7 M&L for rendering 10mm thick on fair faces of brick/concrete surface in CM (1:6) finished even and smooth without using extra cement complete all as specified and directed.. 8 M&L for rendering to ceiling in 5mm thick on fair faces concrete surface in CM (1:3) finished even and smooth without using extra cement complete all as specified and directed. 9 M&L for rendering 15mm thick plaster in CM 1:4 on fair faces of brick work or concrete surfaces of walls finished even & smooth with out using extra cement complete all as specified and directed. 10 M&L for oil bound distempering two coats over a coat of alkali resistant priming paint including preparation of newplastered surfaces of wall complete all as specified and directed by Engineer - in -Charge.Note : All work to be operated by mechanically (i.e Grinder Machine and Air less painting machine) not by blade / brush / roller / normal spray machine) 11 All as per Item No 10 here in before but on ceiling complete all as specified and directed. Note : All work to be operated by mechanically (i.e Grinder Machine and Air less painting machine) not by blade / brush / roller / normal spray machine) 12 Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfacescomplete all as specified and directed.Note : All work to be operated by mechanically (i.e Grinder Machine and Air less painting machine) not by blade / brush / roller / normal spray machine) 13 Providing and fixing factory made uPVC white colour casement (Openable) Door made of extruded profile wilh wall thickness of 2.3mm ( + -0.2mm). Window profile with hollow section with mitlti chamber, frame (60mm x 58mm), sash (60mm x 78mm). T profile (One vertical length in between two shutters) (60mm x 74mm). Glazing bead (35mm x 20mm) will be mitered cut and fusion welded at all corners, including drilling ol holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket 1.2 + -0.2mm thick galvanized steel Frame (28mm x 21.5mm), sash (31mm x 27mm), T profile (27mm x 17mm) to be inserted in required profile, frame will be fixed to the wall wilh 8mm x 100mm long fasteners. Hardware: [casement door handle made of zinc alloyed (white powder coated). Corner striker. Secondary Strikers. Cylinder. Door transmission gear made of mild sleel with multi point locking system with strikes. 3D Hinges of zinc alloyed (white powder coated) [and 5mm thick glazing with selected quality glass complete all as specified and directed. (Note: The unit rate quoted by contractor excludes cost of glass and will be measured and paid separately and includes all other connected accessories like Lock etc. Net opening will be measured for payment purpose.) 14 Supply & Fixing stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples complete all as specified and directed. 15 Supply and fixing factory made uPVC white colour Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) upto 1.50m height made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 1.75 sqm) comprising of uPVC multichambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardwares and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified and directed by Engineer-in-Charge. (Glass or wiremesh shall be paid separately) Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. 16 Supply only6 mm thick sheet figured glassand glazing with rubber packing around the glass, in squaresn exceeding 0.50 sqm in each pane complete all as specified and directed. 17 Demolition Cement concrete(unreinforced) Concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed. 18 M&L 50mm average thickness PCC 1:2:4 type B0 using 12.5mm graded aggregate as in padding and (roof levelling course) on roof surfaces complete all as specified. Note- Water proofing compound to be used @ 3% by weight of cement content for concrete padding work and will be measured and paid separately. 19 M&L for rendering in CM (1:3) 10mm thick over RCC roof, chajja/ brick wallmixed with water proofing compound @ 3% by weight of cement finished even and fair without using extra cement complete all as specified and directed. Note - WPC shall be measured and paid separately. 20 M & Lin repairsfor roof treatmentwith following specification completely, complete all as specified and as directed by Engineer-in-Charge :-(i)Applying a coat of hot bitumen 85x25 @ 1.2kg per sqm.(ii)Laying 3mm thickness APP modified membrane weighting not less than 3 to 4 kg/sqm in 100 mm over laps both longitudinally and transversally and overlaps to be sealed by torch, membrane shall be taken upto the thickness of slab/front fascia. 21 M&L for 75mm thick Cement concrete Type D21:2:4 (40 mm graded gradedaggregate) as in floor finishes and pavings as base complete all as specified and directed. 22 M & L for Virified Dark Shade / Double Charged / Ultracharged tiles Tiles 10mm thick, polished, of size exceeding 0.42 Sq.m and not exceeding 1 Sq.m, [Square or Rectangular] as in Floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed or bedding layer in CM 1:6 complete all as specified and directed. 23 All as per item No 22 here in before, but on vertical surfaces incl 10mm thick CM 1:3 as in baking coat of dado/skirting complete all as specified and directed. 24 M&L for Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed. 25 M&L for 75mm thick PCC 1:3:6 type C1 using 20mm graded stone aggregate as in plinth protection and finished even and smooth with using extra cementcomplete all as specified and directed. 26 Supply & fixing in repair with semi perforated 12mm thick micro tegular edged GRG false tiles at all heights with GRG (Glass Fibre Reinforced Gypsum) false ceiling tiles of Size 595 x 595 mm of approved texture, design and patterns having moisture content less than 2%, humidity resistance of 99%, NRC0.50 to 0.75 as per IS 8225:1987, Noncombustible as per BS 4 76 (part 4 )-1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on inter locking metal T-Grid of hot dipped galvanized iron section of 0.33mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main T runners of size 15 x 32 mm of length 3000mm,cross-T of size 15x 32mm of length 1200mm and secondary intermediate cross-T of size 15 x 32 mm of length 600mm to form grid module of s1ze 600x 600mm , suspended from ceiling using galvanized mild steel items (galvanizing @ 80 grams per sqm) i.e 50mm long, 8mm outer diameter M-6 dash fasteners, 6mm dia fully threaded hanger rod upto 1 OOOmm length and L shape level adjuster of size 85x25x2mm. Galvanised iron perimeter wall angle of size 24x 24x0.40mm of length 3000 mm to be fixed on periphery wall I partition with the help of plastic rawl plugs at 450 mm center to center and 40mm long dry wall wood screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in Charge. 27 Demolition Cement concrete(unreinforced) Concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed.. 28 M&L for 75mm thick Cement concrete Type D21:4:8 (40 mm graded gradedaggregate) as in floor finishes and pavings complete all as specified and directed. 29 Dismantlingof stone slabs and paver block tiles of any description or thickness in floorslaid bedded and pointed in any mortar complete all as specified and directed. 30 M&L Sand filling under floors or in foundations including watering and consolidation complete all as specified and directed. 31 M&L for machine pressed precast concrete interlocking paver block any shape and size with grey cement and pigment conforming to IS-15658-2006 of 60mm thickness M-35 gradecomplete all as specified and directed. 32 All as per item No 31 here in before but except tiles. 33 M& L factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever complete all as specified and as directed. 34 M&L for preparation of old painted surfaces of wall / concrete surfacesover 10cm width or girth not otherwise described and applying two coats of synthetic enamel paint complete all as specified and directed. 35 Taking down carefully copper/ aluminum point wiring (Light, fan, socket, power and Bell) including fixture and fittings such as switches, sockets, ceiling roses, lamp, holder , regulators, socketslight fittings etc , removing material to store for keeping in safe custody or for taking credit , and making good disturbed surface of walls, floors, etc. complete all as specified and as directed. 36 M&L forpoint wiring with 1.5 Sqmm single core PVC insulated unsheathed multi stranded copper conductor FRLSH cable 1100V grade drawn through and incl PVC concelled conduit with accessories like bends tees, junction boxes etc fixed recessed in wall or ceiling etc including 1.5 Sqmm single core PVC insulated but unsheathed multistrandard copper conductor FRLSH cable 1100V grade as earth continuity wire incl modular sunken type pressed steel terminal boxes of size with 3mm thick bakelite steel white/coloured top cover for the following:- 37 (a) One light pointcontrolled by one switch complete all as specified and as directed. 38 (b) One fan point controlled by one switchcomplete all as specified and as directed. 39 All as per item No 36 here in before but with cable of size 2.5 Sq mm PVC insulated on independent boardfor power plug 15 Amps complete all as specified and as directed. 40 Supply and fixing Modular switch one way 6A,1 Module, complete all as specified and directed. 41 Supply and fixing Modular switch one way 16A,1 Module, complete all as specified and directed. 42 Supply and fixing Modular socket 16/15A-2/3 pin combined2 Module complete all as specified and directed. 43 Supply and fixingModular Fan Regulator, 120W, 2 module complete all as specified and directed. 44 Supply & fix ceiling rose 3 terminal/ poly carbonate, isolated body complete all as specified and directed. 45 M&L for concealed sub main wiring complete with PVC insulated FRLSH cable of single core 4 Sqmm 1100 volts grade with multi standard copper conductor for drawn through and including conduiting PVCConduit with accessories incl 4 Sqmm unsheathed multi standard FRLSH copper conductor as earth wire. Note: Two runs of cable and one run of conduit & earth wire shall be measured as one run length complete all as specified and as directed. 46 Supply and fixing Supply and fixing LED luminaire 600 mm x 600 mm,35/36 watt, 220 V AC recessed type with highefficiency PMMA diffuser soft glare free light completewith driver, holders & LED lamp suitable for roofceiling including connecting up with driver threecore flexible copper conductor cases of suitable size complete all as specified and as directed. 47 Supply and fixing LED bldg securitylight fitting 60 Watt230 V AC outdoor type with high pressure diecast aluminum hosing and heat resistantcomplete with driver, lamp bracket with impactand corrosion resistant including thermalmanagement in multiple optics complete withIP 65/66 protection, service bracket, nuts, bolts to fix the security light on wall, required length and capacity of FRLSH PVC multistranded copper conductor for electrical connection from ceiling rose to coneector of security lightcomplete all as specified and directed. 48 Taking down ceiling fan 1200mm/1400mm sweep forcomplete servicing, repair of fan motor and replacement of worn out parts such as bearing,including paintingof ceilingfan with synthetic enamel paint by spraying with filling the cavities with filler, one coat after cleaning all dust and writing the MES No and hanging of ceiling fan with new down rod of 90 cm heightin situ , complete all as specified and directed by Engr-in-Charge. 49 Supply and fix exhaust fan, steel bodyAC single Phase. 230V of size 300msweep with, blades, and frame and louvers complete all as specified and directed by Engr-in-Charge. Note :- (a)Making hole in existing brick/PCC wall of required size to accommodate exhaust fan and fixing louvers on outer surface shall be deemed to be inclusive of quoted rate by the contractor. 50 Supplying and fixing of sheet metal enclosure, single phase, double door SPN DB 8 way, flush to wall mounting for MCB fitted with 200 Amp ratedbus barsand neutral links ( without MCBs) SPN/ TPN complete all as specified and directed by Engr-in-Charge. 51 Supply and fixing240V, 10KA C curveminiature circuit breaker (MCB) of SPN 40 AMPand current carrying capacity in the MCBDB complete with connection testing and commissioning complete all as specified and directed. 52 Supply & fix MCB SP 6 to 32 Amps 10 KA 240 V, 10 KA Ç Curvecomplete all as specified and directed. 53 M & L for plastic bodyJumbo air cooler having 150 ltr water tank capacity, 5 blades, single phase 230 volts AC Supplyand mounted on wheel for easy movement complete all as specified and directed. 54 M & L for earthing complete with galvanised steel earth plate electrode of size 60 cm x 60 cm x 6mm thick burried directly in ground not less that 2.25 m deep below normal ground level and top edge of the plate not less than 1.5 mtrs below normal ground level connected to GI strip of size 25 x 4 mm by means of bolts, nuts, check nuts and washers of GI or steel all as shown in electrical palte No 3 connected to earthing test point incl excavation, earth work in any type of soil strata, PCC chamber, 40 mm dia GI med grade pipe as protection of strip and 15 mm dia GI Med grade watering pipe, funnel, wire mesh etcincluding testing on complete all as specified and directed.
