Tender For General Repair Work Of Residential Buildings Under Provincial Section, Pwd, Fatehgarh. - Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. DSR NO. 15.56 (Rates are including all taxes, royalty, labour cess etc but Exculding GST shall be paid as per applicable) 2 BrickworkwithcommonburntclayF.P.S.(nonmodular) bricks of class designation 7.5 in superstructure above plinth level up to floor to vth level in Cement mortar 1:4 (1 cement : 4 coarse sand) DSR 6.4.1.(Rates are including all taxes, royalty, labour cess etc but Exculding GST shall be paid as per applicable) 3 Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources: 4 graded stone aggregate 20 mm nominal size derived from natural sources) DSR NO. 5.1.3 (Rates are including all taxes, royalty, labour cess etc but Exculding GST shall be paid as per applicable) 4 Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. DSR NO. 10.1 (Rates are including all taxes, royalty, labour cess etc but Exculding GST shall be paid as per applicable) 5 12 mm cement plaster in single coat on fair side of single or half brick wall for interrior plastering includign arises, interior rounded angles chamfers and of rounded angles not exceeding 80 mm in girth and finished even and smooth. 1:4 cement coarse mortar. (Rates are including all taxes, royalty, labour cess etc but Exculding GST shall be paid as per applicable) 6 Providing and laying vitrified floor tiles in different size (thickness) to be spefifed by the manufacture) with water absorption less than 0.08& and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 including grouting the joints with white cement and matching pigments etc. complter size of Tiles 600x600 mm as per DSR No. 11.41.2 (Rates are including all taxes, royalty, labour cess etc but Exculding GST shall be paid as per applicable) 7 Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gram/litre, of approved manufacturer and of required shade and colour all complete to achieve even shade and colour New work (two or more coats) over and including water thinnable priming coat with cement primer having VOC content less than 50 gram/litre DSR NO. 13.41.1(Rates are including all taxes, royalty, labour cess etc but Exculding GST shall be paid as per applicable) 8 Finishing walls with water proofing cement paint of required shade New work (Two or more coats applied @ 3.84 kg/10 sqm)DSR No. 13.47.1 (Rates are including all taxes, royalty, labour cess etc but Exculding GST shall be paid as per applicable) 9 Painting with silicon & acrylic emulsion based water thinnable sealer of approved brand and manufacture on wet or patchy portion of plastered surfacesTwo coats DSR No. (Rates are including all taxes, royalty, labour cess etc but Exculding GST shall be paid as per applicable) 10 Supply and fixing galvanized mosquitos proof heavy quality iron wire gauge or expended metal heavy quality over windows and including supply of C.P. Teakwood batten 8cmX1cm (3X3/8)/flat iron 25mmX4mm and including supply of necessary screws all materials, labour, T&P etc. required for proper completion of work. DSR 9.7.8 (Rates are including all taxes, royalty, labour cess etc but Exculding GST shall be paid as per applicable) 11 Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately)30 mm thick DSR No. 26.87.1 (Rates are including all taxes, royalty, labour cess etc but Exculding GST shall be paid as per applicable) 12 Supply and Fixing of weleded mesh 1x2 of 10 MS gauge wire(Rates are including all taxes, royalty, labour cess etc but Exculding GST shall be paid as per applicable) 13 Supply and Fixing of Aluminium sheet 26 gauge (Rates are including all taxes, royalty, labour cess etc but Exculding GST shall be paid as per applicable) 14 Providing and fixing 15mm dia B class I.S.I marked G.I Pipe complets with G.I specials such as bends tee socket cross clamps etc. earth work including filling the renches etc required for proper completion of the work. The rate also includes concealed G.I. fittings whereever regd. cutting and making good the floor R.C.C. & the walls etc. the rate also includes supply of all material labour and T&P etc complete work as per DSR No. 18.2.1 (Rates are including all taxes, royalty, labour cess etc but Exculding GST shall be paid as per applicable) 15 Renewing panes of glass in door windows and ventilatros with brads & putty including supply of all material labour T&P etc complete. (4mm thick glass pans) (18.03 New item) (Rates are including all taxes, royalty, labour cess etc but Exculding GST shall be paid as per applicable) 16 Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank DSR No. 18.48 (Rates are including all taxes, royalty, labour cess etc but Exculding GST shall be paid as per applicable) 17 13.26 Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete DSR No. (Rates are including all taxes, royalty, labour cess etc but Exculding GST shall be paid as per applicable) 18 Finishing walls with Acrylic Smooth exterior paint of required shade for New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm). As per DSR No. 13.46.1 (Rates are including all taxes, royalty, labour cess etc but Exculding GST shall be paid as per applicable) 19 18.7 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply and all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. 15 mm nominal dia Pipes DSR 18.7.1 (Rates are including all taxes, royalty, labour cess etc but Exculding GST shall be paid as per applicable) 20 Providing & Fixing bib cock of approved quality 15 mm nominal bore as per DSR No. 18.15 (Rates are including all taxes, royalty, labour cess etc but Exculding GST shall be paid as per applicable) 21 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P. brass pillar tapsDSR No. 17.7.30 (Rates are including all taxes, royalty, labour cess etc but Exculding GST shall be paid as per applicable) 22 Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: W.C. pan with ISI marked white solid plastic seat and lid. DSR 17.2.1 (Rates are including all taxes, royalty, labour cess etc but Exculding GST shall be paid as per applicable) 23 Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge.(Rates are including all taxes, royalty, labour cess etc but Exculding GST shall be paid as per applicable) 24 Supply and fixing of 4.5cm (1.3/4) thick C.P. Teak wood part panelled & part glazed door and window shutters including supply of wooden cleats and stops and including fixing and adjustment of hinses, bolts, locks, handles, springs and/or other fitting but excluding their supply and including painting with two coats of Black Japan on all iron fittings if necessary & including fixing the glass panes with putty & brad. Glass to be 4mm thick. Fitting with necessary screws to be supplied departmently.DSR 9.134.1.1.1 (Rates are including all taxes, royalty, labour cess etc but Exculding GST shall be paid as per applicable) 25 Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing Rectangular shape 1500x450 mm. DSR 17.32.4 (Rates are including all taxes, royalty, labour cess etc but Exculding GST shall be paid as per applicable)
