|
| 1 | Taking down Chowkats or frames not exceeding 1.5 Sq. M each (Without taking off shutters from the frames) |
| 2 | Taking down Chowkats or frames exceeding 1.5 Sq. M but not exceeding 4 Sq. M each (Without taking off shutters from the frame) |
| 3 | S&F Pressed steel frames for door with one or more rebates including necessary fixing lugs hinges, lock, strike plate etc.complete for frame of size-105x60mm |
| 4 | M&L for PCC 1:3:6 type C-0 in filling of pressed frame. |
| 5 | S&F Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor.complete all asapecified and as directed. |
| 6 | S&F 30 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides. |
| 7 | S & F 30 mm thick Second class hard woodkiln seasoned and chemically pressure treated Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc., (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut mitred beads for securing glass etc. |
| 8 | S & F Solid PVC Door Frame of size 50mmx47 mm made out of 5mm wood grain colour PVC Sheet reinforced with MS Square etc. |
| 9 | S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. .frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail,; Paneling of plain colour PVC sheet to be fitted in the M.S.frame welded/ sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification complete all as specified and as directed. |
| 10 | S&F aluminium frame for doors, windows, ventiletors with one or more rebates including joining cleat for fixing etc complete all as specified in cl powder coating above aluminium section.(minimum thickness of powder coating 50 micron). |
| 11 | S&F for window/ventiletor shutters, side hung type without sash bars aluminium section weighing 0.55 kg/m including necessary joining cleats,glazing clips,ruber neoprene packing,anodised aluminium snap beading screws,anodised aluminium fittings such as peg stays 150 mm long(1 no),hinges type-B-21 100 mm long( 2 no) suitable handle 1 no complete all as specified incl powder coating of any colour (thick ness of powder coating not less than 50 micron). |
| 12 | S&F for Aluminium three track sliding window and ventiletor frame Side/Top made up 123.45 mm /44 mm 1.5 mm thick bottom 128.00 mm/ 39.15 mm / 1.63 mmaluminium section & shutter made up 69 mm / 25.40 mm/1.63 mmand 50.80 mm / 25.40 mm/ 1.63 mm thick without sash bar alum sectionincluding all necessary joining cleats,hold fast ,rubber gasket anodised snap beading,anodised alumn fittings,suitable alumn handle and locking arrangment , two track for glass and one track for aluminium wire meshetc as directed by engr in charge. incu powder coating of any colour(thick of powder coating not less than 50 micron) & provision of AC hole as directed. |
| 13 | S&F MS framed work such as grills, gratings, etc with ends of bars shouldered and/or revited, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work confirming to Fe.290. Gde-E-165 |
| 14 | S & F 4 mm thick Sheet glass, ordinary quality and glazing with wooden beadsin squares not exceeding 0.5 Sq. M in each pane |
| 15 | S & F 4 mm thick frosted glass, ordinary quality and glazing with wooden beadsin squares not exceeding 0.5 Sq. M in each pane |
| 16 | Supply and fixedStainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed. |
| 17 | M&L for Plain Cement Concrete Type B1 1:2:4 (using 20 mm graded granite stone aggregate) as in hold fast. |
| 18 | S & F100 mm long extruded aluminium alloy with galvanised mild steel Butt hinges and fixed type B-21. |
| 19 | S & F75 mm long medium weight, cold rolled mild steel Butt hinges and fixed. |
| 20 | S & F 150 mm long Extruded Aluminium alloy handles, fabricated type, anodised. |
| 21 | S & F 150 mm long Aluminium, anodised, barrel tower bolts of extruded section |
| 22 | S & F 300 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast Aluminium alloy. |
| 23 | Supply fix in repairs Harrison rails, mild steel, chromium plated fixed alongwith 2 Nos. of brackets, stops, rollers etc, complete all as specified. |
| 24 | S&F in repairs 10 Ltrs. Capacity PVC flusing cisternlow level slimline or equivalen make / model with all accessories. |
| 25 | S&Fin repair vitreous china, orrisa squatting pan of pattern water closetseat of size 580mm x 440mm white with and incl\"P\" or \"S\" trap and provision of lime concrete bedding in repairs |
| 26 | Supply & Fix in repairs Vitreous China (Pedestal pattern) Vitreous china premium/ 1st quality wash down water closet wall hungEWC white/ ivory/off white (closed pattern incl all necessary accessories like rag bolts/ gel gasket etc. pipe) complete in all respect all as specified. “long pan”, size 580 mm white with ‘P’ or ‘S” trap, front or back inlet and foot rests, any pattern (excluding flushing cistern and flush pipe) |
| 27 | S & F in repairs Vitreous China Ware Wash hand basin white, flat back, size 550 x 400 mm sizeincluding cutting for and pinning ends of brackets or erecting stand and waste pipe as requred complete all as specified an as directed |
| 28 | PVC connection 15 mm bore450 mm long |
| 29 | S&F in repairs brass cromium plated Tubular towel rail, 20mm dia, D type, 60cm long between flanges. |
| 30 | Supply and fix 600mm x 450 mm bevelled edge mirror of selected quality glass, mounted on 6 mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers incl taking down old one. |
| 31 | S&F in repairsVitreous china urinals, half stall type, white , complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60 mm long brass screws. |
| 32 | S&F for Urinal spreader of PTMT any colour forfixing with 15 mm dia pipe. (Minimumweight 60gms) |
| 33 | S & F in repairs15mm bore angular/ concealed stop valves, cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions. |
| 34 | S & F in repairs 15 mm bore chromium plated bib taps, cast copper alloy, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule. |
| 35 | S & F in repairs 15 mm bore Fancy type pillar taps, Cast Copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts, screwed for iron pipe and fixed. |
| 36 | S & F in repairs Chromium plated shower rose 125 mm size with or without swivel joints, any size, including fixing tosteel pipe or union |
| 37 | S&F forhealth faucet (ABS Body) mild steel chromium plated suitable for 15mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connection and fixed in position complete in all respect as specified. |
| 38 | Supply & fix 32 mm dia., Waste fittings, brass chromium plated for glazed ware sinks, wash basins etc., with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed incl 32mm dia PVC Waste pipe. |
| 39 | Dismantling floor, hearth or wall tiling incuilding cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the permises. |
| 40 | M&L for Glazed ceramic coloured tiles in vertical surfaces 450x 300x 7 mm thick set and jointed in neat cement slurry & painted in white or colour cement to match incl backing coat 10 mm thick in CM 1:4 . |
| 41 | M&LNon - skidcoloured Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured including Screed bed or bedding layer of cement mortar 1:6, 15 mm thick for laying floor finishes. |
| 42 | M&LNon - skidcoloured Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured including Screed bed or bedding layer of cement mortar 1:6, 15 mm thick for laying floor finishes. |
| 43 | M&L for Granite of any type 18-20 mm thick machine cut bedded and jointed with grey cement slurry and pointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete incl 20 mm thick screed bed 1:6 CM in floors. |
| 44 | Dismantling wall and ceiling boards (fibre, pulp, insulation etc.) any thickness, including cover fillets. |
| 45 | S&F for Anodised aluminium/ GI snap grid power coated framed work of size 605x605 mmfor false ceiling all as specified with hangers 4mm thick GI (upto 1200 mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40x3 mm size 60 mm long and expansion hold fasteners 12.5 mm dia 40 mm longcomplete all as specified and as directed. |
| 46 | M & L for 4mm thick Nonasbestos fibre cement building boardsfixed or laid GI/Aluminium framework with screws as approved by GE of size fixedin ceiling as specified and directed. |
| 47 | Taking down cement plaster on brick or stone walls, etc., including raking out joints, hacking for key, scrubbing down with water, etc. |
| 48 | Demolition of brick work or stone/ boulder masonry built in cement mortar or cement lime mortar including removal to rubbish complete all as specified and as directed. |
| 49 | M&L for half brick work burnt modular bricks built in cement mortar 1:4 straight or curved on plan exceeding 6mtr mean radius and all as directed. |
| 50 | M&L for 20mm thick plaster in two layers on fair faces of brick work or concrete surface in cm (1:4) with wpc @2% by weight of cement face of conc work to wall surface and the surface is finished even and smooth without using extra cement.WPC paid separetely |
| 51 | M&L rendering 15mm thick on other than fair faces of brick or concrete Surfaces in cement mortar 1:6 finished even and smooth. |
| 52 | M&L rendering 5mm thick of cement plaster 1:3on concrete surfaces of ceiling finished even and smooth (without using extra cement.). |
| 53 | Supply only Integral water proofing compound |
| 54 | Dismantling plain or corrugated asbestos sheeting any thickness in roof covering. |
| 55 | S&F pre painted galvatume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws as specified. |
| 56 | S&F pre painted galvatume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws as specified. |
| 57 | Dismantling of timber boarding of any description fixed in any position with nails complete all as specified and directed. |
| 58 | S&F pre painted galvatume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws as specified. |
| 59 | Removing complete existing treatment incl pcc pedding of roof surfaces by picking, sweeping clean and washing down with water to remove dust etc., |
| 60 | M&L for brushing neat cement slurry with 03 Kg of cement per Sqm |
| 61 | M&L for rendering 10 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 . (Internal water proof compound measured seperately) |
| 62 | M&L 25 mm thick cement concrete PCC Type B0 1:2:4 using 12.5 mm graded aggregate. |
| 63 | M&L APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) land on primed surface by forced applicationincluding coating the surface with water based bituminous primer blow bitumen of 85/25 or 90/15 at 1.2 Kg/Sqm both at bottom and top of the membrance and finally finished with one coat of bitumenous aluminium primer at 100 gm per sqm complete all as specified. |
| 64 | Taking down rain water pipes inculding all fittings any size and pattern |
| 65 | S & F 75 mm bore PVC (SWR) Soil, waste and vent pipes single socketed in any length with rubber ring joints fixed to walls. |
| 66 | S & F 110 mm bore PVC (SWR) Soil, waste and vent pipes double socketed in any length with rubber ring joints fixed in walls. |
| 67 | S & F 110 mm bore PVC (SWR) bends of any radius. |
| 68 | S & F 75 mm bore PVC (SWR) bends of any radius. |
| 69 | S & F 110 mm bore PVC (SWR) junction single (Single `T\") equal or unequal with access door |
| 70 | S & F 110 mm bore PVC (SWR) Vent Cowl |
| 71 | M&L 75 mm bore for PVC (SWR) floor trap with grating incl jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) |
| 72 | M&L 75 mm bore for cast iron Nahani trap with grating incl jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) |
| 73 | Taking up or down 15 mm bore steel tubing and connections, including cleaning for Refixing or removal to store |
| 74 | Taking up or down 20 mm bore steel tubing and connections, including cleaning for Refixing or removal to store |
| 75 | Taking up or down 25 or 32 mm bore steel tubing and connections, including cleaning for Refixing or removal to store |
| 76 | Supply and laying 20 mm dia CPVC pipes SDR 11 & plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified. |
| 77 | Supply and laying 25 mm dia CPVC pipes SDR 11 & plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified. |
| 78 | Supply and laying 32 mm dia CPVC pipes SDR 11 & plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified. |
| 79 | Taking down/Dismantlinig wrought iron or mild steel work of any description not otherwise provided for. |
| 80 | S&FRolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates to Fe-290 (Gde E- 165) complete all as specified |
| 81 | Preparation of new or previously treatedsteel surfaces of any description, over 10 cm width or girth, not otherwise described appling one coat of Red Oxide, zinc chorme and applying two coat of synthetic enamel paint. |
| 82 | Preparation of old paintedsteel surfaces of any description, over 10 cm width or girth, not otherwise described appling onecoat of synthetic enamel paint. |
| 83 | Preparation of new or previously treated wood surfaces of any description, over 10 cm width or girth, not otherwise described appling one coat of pink primer over applying two coat of synthetic enamel paint. |
| 84 | Material & Labour for preparation of new wall surface applying Two or more coats of 100% Premium acrylic exterior emulsion paint with silicone additives of required shade additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @2.20 litre/ 10 sqm complete all as specified and directed. |
| 85 | M & L for Complete removal of old surfacefor preparation of new wall surface applying Two or more coats of 100% Premium acrylic exterior emulsion paint with silicone additives of required shade additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @2.20 litre/ 10 sqm complete all as specified and directed. |
| 86 | M&L for preparation of new plastered surfaces of walls and applying two coats of acrylic distemper including one coat ofchalk whiting on plastered surface to prepara-tory to distempering complete all as specified and directed over 1 mm thick wall care putty. |
| 87 | M&L for complete removal of old surfaces of walls and applying two coats of acrylic distemper including one coat ofchalk whiting on plastered/putty surface to prepara-tory to distempering complete all as specified and directed over 1 mm thick wall care putty. |
| 88 | Preparing new surfaces of ceilings by brooming down or by steel wire brushing and applying three coats of white wash. |
| 89 | M&L for preparation of old decorated plastered surfaces of ceiling and applying one coat of white wash complete. |
| 90 | Dismantling PVC/RCC water tanks and removing to store exc 500 & not exc 1000 ltrs |
| 91 | S&F 1000 Ltrs. Capacity rotational moulded polyethylene water storage tanks (cylinder vertical with class top) hoisted and fixed in position all as specified including 20mm bore ball brass valves, high pressure, with polythene float and flynut complete screwed for iron pipe or brass ferrule and fixed. |
| 92 | Demolition of un-reinforced Cement Concrete of any description and in any position not otherwise specifically provided for. |
| 93 | Rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:3 and even and smooth without using extra cement including mixing of water proofing compound wherever required for floors and sides of wall in sunken floorsNOTE: Water proofing compound will be measured separately |
| 94 | M&L applying one coat of NITTO proof to sides and bottom of floors to sunken floors. |
| 95 | M&L for 75 mm thick cement concrete as in plinth protection type C-2 1:3:6 (using 40mm graded aggregate) finishing concrete surface even and smooth with using extra cement complete all as specified and directed. |
| 96 | M&L for plain cement concrete Type E2 1:5:10 (using 40mm graded stone aggregate) in foundations, filling and mass concrete. |
| 97 | M&L for providing cement concrete as in roof kerbs or mud stops, rounded or chamfered on edges,Type B0 1:2:4using 12.5mm graded stone aggregate , all as specified and as directed. |
| 98 | M&L for plain cement concrete Type B2 1:2:4 (using 40mm graded granite stone aggregate) in floor sub base and mass concrete. |
| 99 | M&L for 75 mm thick PCC type D2 1:4:8 using (40mm gradded aggregate) as in sub base. |
| 100 | Demolition of stone slabs tiles of any description or thickness in floors apronslaid bedded and pointed in any morter etc |
| 101 | M&L forMachine pressed precast conctete interlocking paver block any shape and size confirming to IS 15658-2006 of 80 mm thickness, M-35 Grade with grey cement and pigment including 50mm thick sand cushion complete all as specified and directed. |
| 102 | Taking down carefully existingunserviceable copper/ aluminiumpoint wiring (light,call bell, two way, socket orpower point etc)completewith fittings/fixures such asswitches sockets, ceiling rose, fan regulators,bracket light fittings and making goodto the disturbedsurface complete all asdirected by Engr-in-Charge. |
| 103 | Taking down the existing unservicable main switch /change over / cut out/ DBs, MCCB and MCBs of any type/ capacity/ description as existing at site including making good the disturbed surfaces to match with the existing finishes all as specified by Engr-in- Charge. |
| 104 | Taking down carefully unsv aluminium submain wiring of any type /loc includingconduit /casing and earth wire and making good the distributed surface of walls /ceiling matching with existing finishes all as directed by Engr-in-Charge. |
| 105 | Taking out unsv UG Cable any cross sectional area and connection of any description of any description laying in trenches or fixing with wall or poles all as specified and directed. |
| 106 | M & L for Point wiring with 1.5 Sq mm copper conductor single core FRLSH PVC insulated unsheathed 1100 Volts multistranded drawn through and including rigid PVC Concealed conduit and its accessories of suitable size, high grade ISI markedin walls /roof and PVC boxes of suitable size including fixing/grouting sunken/ surface as per site requirement for mounting the switches / sockets/ regulators etc including running up of 1.5 Sq mm copper conductor FRLSH PVC insulated cable as earth continuity conductor along with wiring and connecting to the common earth dolly all as specified for :(a) One light point controlled by one, one way switch 5 Amps |
| 107 | (b) One ceiling fan / exhaust fan point controlled by one , one way switch and regulator |
| 108 | (c) One 3 point 5 Amps socket outlets point controlled by one switch on the same board |
| 109 | (d) One 3 pin 5 Amps switch socket outlet point controlled by one switch on independent board |
| 110 | Description all as per item No 5here in before but for one light point controlled by one, two way switch 5 Amps |
| 111 | All as per item No 5 above but with two run of 2.5 sqmm multi stranded Single core copper conductor 1100 volts grade FRLSH PVC insulated sheathed cable with one run of FRLSH PVC 2.5 Sqmm multi standard insulated sheathed copper wire as earth continuity conductor along with wiring and connecting to the common earth dolly on independent board. |
| 112 | S & F Switch piano (White)flush type single pole one way 6 Amp, 230 Volts complete all as specified. |
| 113 | S & F switch piano (White)single pole flush type, two way, 6 amps, 230 volts.complete all as specified and directed. |
| 114 | S & F Socket outlet (White)2 in 1, 5 pin, 5 Amps complete all as specified and directed. |
| 115 | S & F Switch socket combination(White)flush type multipurpose 5 pin 5 Amps two in one , 230volts complete all as specified |
| 116 | S&F Switch socket combination (White)2 in 1 5/6 pin, 15 Amp flush type universal. |
| 117 | S&F ceilling rose (White)three terminal surface bakelite type AC 50 Hz 230 Volt of size 65x50mm complete all specified |
| 118 | S & F ceiling fan regulator (White)step type 2 Module, flush type heavy duty suitable to work on 230 Volt AC supply complete all as specified. |
| 119 | S & FLamp holder (White)with insulated body, with back plate suitable for batten fittingscomplete all as directed. |
| 120 | S & F LED ADORE 10 W B22 CDL 2 STAR LAMPwith B 22 base capacity 1200 lumencomplete all as specified. |
| 121 | S & F sheet metal enclosure MCBVTPN 12 wayDouble door Ready to use DBs - Provided with insulated vertical phase bus-bars |neutral bar/s with shroud/s | earth bar/s | sticking saddles | cement spill protector | color-coded interconnecting wire set | cable ties | blanking plates and circuit identification labels With provision for4 Pole MCCB 125 A as incomer and SP/SPN MCBs as outgoing complete all as specified and directed. |
| 122 | S & F MCCB 4 Pole 415 volts 125Amps with thermal - magnetic release with breaking capacity 25 KA and with adjustable overload setting complete all as specified. |
| 123 | S & F sheet metal enclosure MCBDBSPN8 way with 200 Amps rated bus bar 240 volts double door withlocking system complete includinggrouted on walls complete all as specified. |
| 124 | S&F in replacement decorative, wall mounting, champagne gold finish fixture with plastic body suitable for 9 W LED lamp B22 base made out of polycarbonate with unbreakable globe/frame suitable for LED bulb and provision of LED bulb 09 watts completeall as specified and as directed. |
| 125 | S & F MCBSPN230volts suitable for fixing on MCB DB of capacity 40Ampscomplete all as specified. |
| 126 | S & F MCB SP, 240 volts, 6-32A Amps 50 Hz ,confirms to IS/IEC 60898 Breaking Capacity of 10 kA, B-curve, complete all as specified and directed. |
| 127 | Supply and fixing LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceilingrose complete. |
| 128 | S & F Energy saving new generation environmental friendly long life versatile presure die cast aluminium IP 66 security light fitting luminaire with high power LEDs as light source and PC Cover having TOP opening seperate driver compartment with IP 66 Protection and impact resistance of IK07 with electronic driver of capacity 35/36 watts with pre wired andnecessary mounting arrangements, provision of new 3 core multistrandedcopper conductor of size 23/0.193 from ceiling rose to fitting and GI pipe bracket made out of GI pipe medium grade 32 mm dia 1.5 mtr long bend to required shape complete all as directed by Engineer-in-Charge. |
| 129 | Excavation in trenches n exc 1.50 m wide andn exc 1.50 m depthin soft /loosesoil andgetting out for lying of cable and errection pipeetc complete all as directed. |
| 130 | Returning, filling in, trenches insoft /loose soilincluding spreading, leveling, watering and well ramming in layers not exc 25 cmcomplete all as directed. |
| 131 | Removal of excavated soil to a distance n. exc 50 m and depositing where directed at a level n.exc 1.5 m above the starting pointcomplete all as directed. |
| 132 | M & L sand cushioning in trenches for cable protection with coarse sand laid dry in trenches with uniform thickness including consolidation complete all as directed. |
| 133 | Supply & Laying well burnt brick , locally available best quality (sub class \"B\" bricks ) laid in trences perpendicular to UG Cable protection complete all as specified. |
| 134 | Supply & Laying XLPE LT heavy duty UG Cable of size 50 Sqmm 3.5 Core laid in trences /floor/on wall/service connection PVC Insulated, sheathing and armd 1100 Volts grade with aluminium conductor including connection to the main switch/cut out MCB/MCCB with necessary lugs after cutting to required length complete all as specified and directed. |
| 135 | S & F GI Tubing light grade of size 80 mm dia in protection of cable at road crossing /hard standing/pole protection fixed with clam as per site requirement etc all as specified and directed. |
| 136 | Taking down ceiling fan/ Exhaust Fan of any sweep, keeping with safe custody and refixing the same with replacement of unsv core PVC insulated PVC sheathed 3 core multistranded copper conductor cable of size 23/0.193 from ceiling rose to fan terminal over hauling the fan complete all as specified and as directed. |
| 137 | M & L Submain wiring with 2 runs of single core 6 sqmm PVC insulated unsheated (FRLSH) multistranded 1100 volts grade with copper conductor duly cutting chases on walls anddrawn through and including non-metalic Rigid PVC Conduit ISI marked and itsaccessoriesincluding one run of single core 6.0 sqmm PVC insulatedunsheated multistranded 1100 volts grade with copper conductor cable as earth continuty conductor along with the wiring and connected from DB to DB/main board with proper copper lugs and making good disturbed surfaces and matching with existing colour complete all as specified and directed. |
| 138 | Boring holes horizontally under Road without damaging the surface of Road of any type (minimum 1.0 METRE below the Road Surface with the help of GI Tubing not exc. 40mm bore (dia) for passing of UG Cable, complete all as specified and as directed. NOTE: GI Pipe laid will be measured and paid separately under appropriate Item. |
| 139 | Earthing complete with galvanised steel earth plate electrode 60 cm x 60 cm x 6 mm thick burried directly in ground to a depth not less than 2.25 mtrs below ground level with top edge of earth plate not less than 1.5 mtrs below normal ground level connected to GIearth wire 4 mm dia drawn through and including GI protection pipe of light grade 15 mmbore by means of bolts, nuts, check nuts and washers including excavation earth work provisioning of PCC chamber made of PCC 1:3:6 RCC cover funnel with wiremesh 20mm dia watering pipe Medium grade, GI protection pipe 20mm dia bore all as specified in Electrical Plate No.3 of SSR Part I. |
| 140 | Supply and Fix Cable end termination kit for LT1.1 KV Cable for Cable 50 Sqmm 3.5 Core cable complete all as specified and directed . |
