Tender For Provision Of Klp Accommodation (Ph-I) At Jp Line Alwar; 1 Lump sum price worked out by the contractor for BUILDING WORKSas listed in Schedule ‘A’ Part-I representing percentage ( + or - denomination) derived under last column of this schedule above/belowthe lump sum price prepriced by the MES 2 Lump sum price worked out by the contractor for INTERNAL WATER SUPPLY as listed in Schedule ‘A’ Part-II representing percentage ( + or - denomination) derived under last column of this schedule above/belowthe lump sum priceprepriced by the MES 3 Lump sum price worked out by the contractor for INTERNAL ELECTRIFICATIONas listed in Schedule ‘A’ Part-III representing percentage ( + or - denomination) derived under last column of this schedule above/belowthe lump sum priceprepriced by the MES 4 Lump sum price worked out by the contractor for ROAD, PATH, CULVERT AND HARDSTANDINGas listed in Schedule ‘A’ Part-IV representing percentage ( + or - denomination) derived under last column of this schedule above/belowthe lump sum priceprepriced by the MES 5 Lump sum price worked out by the contractor for SEWAGE DISPOSALas listed in Schedule ‘A’ Part-V representing percentage ( + or - denomination) derived under last column of this schedule above/belowthe lump sum priceprepriced by the MES 6 Lump sum price worked out by the contractor for AREA DRAINAGE as listed in Schedule ‘A’ Part-VI representing percentage ( + or - denomination) derived under last column of this schedule above/belowthe lump sum priceprepriced by the MES 7 Lump sum price worked out by the contractor for FENCING , GATE AND COMPOUND WALLas listed in Schedule ‘A’ Part-VII representing percentage ( + or - denomination) derived under last column of this schedule above/belowthe lump sum priceprepriced by the MES 8 Lump sum price worked out by the contractor for RAIN WATER HARVESTING as listed in Schedule ‘A’ Part-VIII representing percentage ( + or - denomination) derived under last column of this schedule above/belowthe lump sum priceof prepriced by the MES 9 Lump sum price worked out by the contractor for EXTERNAL WATER SUPPLYas listed in Schedule ‘A’ Part-IX representing percentage ( + or - denomination) derived under last column of this schedule above/belowthe lump sum priceof prepriced by the MES 10 Lump sum price worked out by the contractor for EXTERNAL ELECTRIFICATIONas listed in Schedule ‘A’ Part-X representing percentage ( + or - denomination) derived under last column of this schedule above/belowthe lump sum priceof prepriced by the MES 11 Lump sum price worked out by the contractor for LIGHTING PROTECTIONas listed in Schedule ‘A’ Part-XI representing percentage ( + or - denomination) derived under last column of this schedule above/belowthe lump sum price prepriced by the MES 12 Lump sum price worked out by the contractor for SUMMER APPLIANCES AND AIR CONDITIONING as listed in Schedule ‘A’ Part-XII representing percentage ( + or - denomination) derived under last column of this schedule above/belowthe lump sum price prepriced by the MES 13 Lump sum price worked out by the contractor for DG SET as listed in Schedule ‘A’ Part-XIII representing percentage ( + or - denomination) derived under last column of this schedule above/belowthe lump sum priceof prepriced by the MES 14 Lump sum price worked out by the contractor for CRANE as listed in Schedule ‘A’ Part-XIV representing percentage ( + or - denomination) derived under last column of this schedule above/belowthe lump sum price prepriced by the MES 15 Lump sum price worked out by the contractor for SITE CLEARANCE, SITE DEVELOPMENTAND EARTH WORKas listed in Schedule ‘A’ Part-XV representing percentage ( + or - denomination) derived under last column of this schedule above/belowthe lump sum price prepriced by the MES 16 Lump sum price worked out by the contractor for DEMOLITION AND DISMANTLINGas listed in Schedule ‘A’ Part-XVI representing percentage ( + or - denomination) derived under last column of this schedule above/belowthe lump sum priceof prepriced by the MES 17 Sch A Part-XVII MISC ITEMS (TO BE QUOTED BY CONTRACTOR) Notes:(i) This schedule is not pre-priced by MES and the pre-priced rate indicated as Rs 0.00 under column 5 signifies this fact only. (ii) Excavation and earth work except for the items which categorically includes for same shall be measured and paid separately under SCH A PART-XV (SITE CLEARANCE, SITE DEVELOPMENTAND EARTH WORK schedule). 18 INTERNAL WATER SUPPLYS&F for 15mm bore two way bib cock double handle with flange fancy type, cast copper alloy, chromium plated screwed down high pressure with crutch or butterfly handle,screwed both ends for iron pipe of for union etc complete all as specified and directed 19 S&F for 15mm bore dia flush cock ofcast copper alloy,screwed for iron pipe fixed etc complete all as specified and directed 20 INTERNAL ELECTRIFICATIONS & F for lamp holder including Highly efficient LED Bulbs, 9 wattinsulated body with back plate suitable for batten fittings etc complete all as specified and directed. 21 S&F for modulartype 1 module RJ-11 telephone socket with shutter etc complete all as specified and directed 22 S&F ofmodular blanking plates 1 Module complete all as specified and directed 23 S&F of Sheet metal enclosure distribution board VTPN4 way, 415 voltdouble door powder coated, protection class IP-54 isolated neutral bar, mechanical impact strength IK 09 suitable for mounting MCB & MCCB DBs confirming to IS - 13032, IS-8623, BS EN60898 with min 200 Amp rating copper bus bar and grouting, fixing on wall with nut bolts washers proper with PCC works complete all as specified and directed 24 Supply and fixing SP 63Amps rating 240V, 10KA B curve rupturing capacity, IS-8828marked fixing in DBs complete all as specified and directed.Note : (a) Make of the MCB should be the same as that of DB.(b) DBs shall be catered respective items of this schedule 25 M&L for concealed flame proof point wiring (using red, black and green colour wires as colour coding for single phase circuit) for one light point complete with 1.50 Sqmm (nominal cross sectional area) FRLSH PVC insulated unsheathed and multisranded copper conductor cable 1100 V (ISI marked) for main point and for continues as earth wire connected to earth dolly etc (Phase, neutral and earth wire) drawn thorugh and including ERW steel rigid heavy duty socket, elbow, connector, reducer, pipe hook etc for light/fan points including cutting chases in wall and making good disturbed surfaces of walls/ceiling/floors etc by using CM (1:3) etccomplete all as specified and directed.Note :- (i) Two nos of light point circuits shall be controlled by one rotaty switch/MCB fixed in existing DB. (ii) Rotary Switches, junction box, MCB shall be measured and paid separately under appropriate item of this Sch. 26 Supply and fixing (Concealed in wall) factory made flameproof DB duly painted, 4 way dust and vermin proof including with all accessories complete all as specifed and directed.(i) MCBB Curve SPN 32 Amps, 10KA- 01 No (incoming)(ii) MCBB Curve SP 6 Amps, 10KA- 02 Nos (outgoing) 27 SEWAGE DISPOSALM&L for DWCPE pipe laid to slope in trenches,jointed and tested complete with collar for 180mm(outer dia)/163mm (inner dia) bore pipe etc complete all as specified and directed. 28 S&F for 75mmthick steel fibre reinforced concrete (SFRC) cover and frame ( Medium grade )confirming to IS-12592, minimum load bearing capacity 5 tonne/Sqm, in square ,rectangular or circular shapeetc complete all as specified and directed.Note:Qty 150 Sqm of 75mmthick steel fibre reinforced concrete (SFRC) will be executed againt Srl item 28.00 of Area Drainage 29 AREA DRAINAGES&F for 75mmthick steel fibre reinforced concrete (SFRC) cover and frame ( Medium grade )confirming to IS-12592, minimum load bearing capacity 5 tonne/Sqm, in square ,rectangular or circular shapeetc complete all as specified and directed.(Qty 150 Sqm). Note:75mmthick steel fibre reinforced concrete (SFRC)will be mesured and paid underSrl item 27.00 here in before. 30 FENCING , GATE AND COMPOUND WALLM&L for steel gate 5.45m wide and 3.50m height with RCC pillar incl excavation in any type of soil, plastering, painting etc complete all as specified and shown in TD /2004/13 sh 1/3 to 3/3 CE Jaipur Zone 31 EXTERNAL WATER SUPPLY Supply, lay, commissioning, jointing and testing ofcentrifugally cast (spun) ductile iron pipes of 150mm bore class K-7 with spigot and socket ends conforming to IS 8329/2000, IS: 12288 : 1987 code of practice for laying in trenches complete all as specified and directed.Note: The rate quoted by contractor are inclusive of all type of Joints. 32 M&L construction of brick masonryvlave pit / chamber of size 1050 mmX 750mm X 1000mm(type D) (internal dimensions of chamber)depth to be reckoned from the top ofPCC in foundation to top of MS cover with MS sheet cover 3mm thick including frame of angle iron 40 X 40 X 6 mm with locking arrangement and lifting handle including painting two coats of black synthetic enamel paint over a coat of red oxide primer etc including brick work in one brick thick wall in cement mortar 1:4, 15mm thick plastering in cement mortar 1:4 (internally on all brick wall and external upto 15cm below ground level) and necessary excavation and earth work in any type of soil, returning, filling in, disposal of surplus spoil to a distance not exceeding 50 mtr 15 cm thick PCC 1:4:8 type D-2 in PCCfoundation projected by 15cm all round from the outer face of brick wall PCC 1:2:4 type B-1 in coping etc complete all as specified and shown in TD /2004/26 sh 1/3 to 3/3 CE Jaipur Zone 33 Supply, installation, testing and commissioning of Submersible pump, electric driven 415 V, TP suitable for 200/250 mm dia bore well ( Casing pipe size 200/250 mm) supply and Install complete upto 15WHP inclusive of 40 metre long submersible cable and starter. complete all as specified and directed. Material of Construction: Impeller:Stainless steel , Diffusor: Stainless steel , Diffusor casing: Stainless steel,Shaft; Stainless steel ,Bearing Sleeve : High Crome Stainless steel all as specified and directed. 34 Trial bore of 250 mm dia upto 200meter depth below ground level in any kind of soil strata including hard stone/boulder etc. including submitting the strata details both graphically recorded as well as strata results etc complete all as specified anddirected.Note :-The rates quoted shall deemed to include to get survey done for availability/facibility of water as recommended by GWD before execution of work. 35 Trial bore of 250 mm dia exceeding 200meter depth below ground level and upto 400 RM in any kind of soil strata including hard stone/boulder etc.including submitting the strata details both graphically recorded as well as strata results etc complete all as specified anddirected.Note :-The rates quoted shall deemed to include to get survey done for availability/facibility of water as recommended by GWD before execution of work. 36 Development of trial bore Reaming up to by reaming in following step:- (a) From 250mm to 350 mm(b) From 350mm to 450 mm from depth exceeding to 200 meter to 300 meter including casing pipe of 250mm dia and thickness 8mm and pea gravel. etc complete all as specified and directed. 37 Supply, assembling, including jointing lowering and fixing in position ERWMS slotted pipe 250mm dia of 5.4mm thickness ( minimum ) having slots of 1.59 mm wide, 75 mm long assembled and lowered as per location chart approved by the GE including cutting welding as required and painting etc complete all as specified anddirected.NOTE:- Rate quoted by contractor shall deemed to include for S&F well cap 250 mm dia on top of pipe with locking arrengement till the bore well become functional complete. 38 Development of tube well by compressed air with compressor of minimum capacity of 150 PSI and 450 CFM etc complete all as specified and directed dy Engineer- in - Charge.NOTE:-(i) Yield test for the bore well by continuously pumpingto determine safe pumping yield to be carried out by contractor at site and necessary report to be submitted.(ii) Testing of water for potability, dissolved solids, physical/chemical and bactorogical testing etc from the govt lab shall be carried out by the contractor all as directed and test report shall be submitted.(iii) The rates quoted shall deemed to include the above provisions. 39 S&F for MS reducer, bail plug, well cap, MS strip for centering, MS iron clamps, electric logging and sample strata box. etc complete all as specified anddirected. 40 S&F of openwell submersible booster pump of capacity 10 HP having min Head of 20-42M, size of delivery 80x65mm, 1650-700 LPM,etc complete all as specified anddirected. 41 Supply, install, testing & commissioning of LT panel outdoor type (KIOSK) factory made powder coated paint made of 3.15 mm thick CRCAsheet, CPRI approved, dust and vermin proof protection, with 200 Amps copper bus bars front opened with locking arrangements mounted on angle iron frame 40x40x6mm, 45cm height from ground level with PCC foundatioin in 1:4:8 type D-2 complete, comparising of the following accessories :- (a) MCCB 63 Amp 16 KA rating 4 pole 440 volts-01 No (b) MCB-63 Amps, TPN 440 V, 10 KA-01 No (c)Starter, star delta, fully automatic suitable for 15 HP 3 phase elect motor - 01 No (d)Digital Amp/Volt/PF meter with selector switch & CT0-50 Amps - 01 No (e) Single phase preventor mini lec VSP-II-01 No (f) Phase sequance corrector 15 HP motor, 3 phase-01 No (g)LED Indicator lamp - 03 Nos (RYB)(h) Wiring with suitable size copper conductor cable for LT panel.(j) Power factor correction capictor bottle type, 5 KVAR 3 phase- 01 No 42 S&F 1100 Volts grade submersible cable flate 3 core with copper conductor 10 sqmm stranded fixed to column pipes with suitable clamps jointing material etc complete all as specified and directed dy Engineer- in - Charge. 43 EXTERNAL ELECTRIFICATIONDismantling and taking down old unserviceable HT/LT cable of any type/size etc complete all as specified and directed. 44 Dismantling and taking down old unserviceable LT Panel of any type/size etc complete all as specified and directed. 45 Dismantling and taking down old unserviceable bus bar chamber of any type/size etc complete all as specified and directed. 46 Dismantling and taking down old unserviceable submain wiring of any type/size etc complete all as specified and directed. 47 Dismantling and taking down old unserviceable earthing of any type/size etc complete all as specified and directed. 48 Supply, installing,testing and commissioning of 11 KV, 630 Amp Load break switch with 200 Amp DO set and earth switch etc complete all as specified and directed. 49 Supply and Installation of 11 KV Compact Sub Station with non extensible RMU consisting of 1 No manually operated 11 KV/630 Amps VCB in SF6 insulated stainless enclosure,HT Cable/Bus bar ,1 No transformer 500 KVA,11KV/433 CRT dry type & associated LT devices(ACB/MCCB/bus bar/Cable) having following specification:- 50 (a) HT Section:-11 KV, 630A SF6 RMU VCB (Non-Extensible, 1-way) with accessories:-(i)1 No. Direct Cable Module & 1 No. 630A Fixed Manual SF6 Circuit Breaker(ii) Self Powered Relay (IDMT)(iii) Ring Switches & T-Off SF6 Circuit Breaker with Earthing Switches(iv) Live Cable Indicator for Ring Switches(v) Padlocking Facility(vi) Shunt Trip Coil (230V AC) 51 (b)Transformer Section:-500 KVA, 11/0.433 KV, Copper Wound Dry Type Cast Resin Transformer:-(i)Off-Circuit Tap Links (5 positions, ±5% in 2.5% steps)(ii) Losses: 2800W @ 50% load, 7250W @ 100% load(iii) Digital WTI with alarm & trip contacts(iv) RTD Sensors 52 (c ) LT Section:-LT Panel comprising:(i) 1 No. 800A, 4 Pole, 25KA, 415V ACB (microprocessor-based with O/L, S/C, E/F protection)(ii) RYB Indication Lamps(iii) 800A/5A LTCT Cl:1.0(iii)Digital Ammeter & VoltmeterSwitchgear Meters 53 (d) Enclosure & Accessories:-MS Steel Sheet Enclosure (Outdoor Type) with Siemens Grey shade (RAL 7032):(i)Space Heater with ON/OFF Switch & Thermostat(ii)Single Phase Switch with Socket(iii)LT Cubicle Illumination Lamp with Door Limit Switch(iv)MCBs for AC/DC control(v)Bottom entry for incoming cables, outgoing via bus bars(vi)Aluminium Bus Bars & Earth Bus 54 Supply, installing,testing and commissioning factory made (incl CPRI type test certified), LT feeder pillar box (KIOSK), outdoor type plate form mounted suitable for 415 volts 3 phase and netural suitable for 4 wire 50 Hz AC supply system having bus bar chamber with insulated Copper bus bar 630 Amp rating not less than 60 cm long installed on porcelain insulators.The panel shall be dust and vermin proof, IP 65 class protection and made of 3.15 mm CRCA MS sheet and 40x40x6mm thick angle iron frame work, powder coated finish, frontand rear opening type with aprons for cable entry, with double door shutter and locking arrangement (including provn of 65 mm Godrej (Freedom) lock with 2 keys, internal wiring with suitable size of copper strip from bus bar to MCCB and metering wiring with PVC insulated, stranded copper conductor, FRLS Cable, IS-694 marked of adequate size but not less than 4 sqmm with 45cm height from ground level with PCC foundatioin in 1:4: 8 type D-2 complete the following accessories :-(Main Panel) 55 INCOMING:-(a) MCCB 630 Amp 50 KA rating 4 Pole 440 voltswith megnatic setting and thermal release- 01 No(b)Multifunction meter Class, 1.0, Three line Bakelite LCD Display with back sealing arrangement , with meter run hour & power on Hour, AVG , Max & total value of Active , reactive & apparent power & span shot of power ( KW) , current (I) , Voltage (V) & PF with programmable CT Ratio of -/5A along with Suitable size core CTs for current sensing (c)Indication lamp 22.5mm dia LED type 240 volts AC to show three phase availability-01Set.(d) Copper bus bar three phase630 Amp- Set of 4 Nos.OUTGOING(a) MCCB 250 Amps 35 KA rating 4 pole 440 volts megnatic setting and thermal release -03 Nos(b) MCCB 100 Amps 35 KA rating 4 pole 440 volts megnatic setting and thermal release -02 Nos(c) Astronomical timer 3 phase with MCB of capacity 6 to 32 Amp TPN- 01 no 56 Supply, installing,testing and commissioning factory made (incl CPRI type test certified), LT feeder pillar box (KIOSK), outdoor type plate form mounted suitable for 415 volts 3 phase and netural suitable for 4 wire 50 Hz AC supply system having bus bar chamber with insulated Copper bus bar 400 Amp rating not less than 60 cm long installed on porcelain insulators.The panel shall be dust and vermin proof, IP 65 class protection and made of 3.15 mm CRCA MS sheet and 40x40x6mm thick angle iron frame work, powder coated finish, frontand rear opening type with aprons for cable entry, with double door shutter and locking arrangement (including provn of 65 mm Godrej (Freedom) lock with 2 keys, internal wiring with suitable size of copper strip from bus bar to MCCB and metering wiring with PVC insulated, stranded copper conductor, FRLS Cable, IS-694 marked of adequate size but not less than 4 sqmm with 45cm height from ground level with PCC foundatioin in 1:4: 8 type D-2 complete the following accessories :-( Panel 1) 57 INCOMING:-(a) MCCB 250 Amp 25KA rating 4 Pole 440 voltswith megnatic setting and thermal release- 01 No(b)Multifunction meter Class, 1.0, Three line Bakelite LCD Display with back sealing arrangement , with meter run hour & power on Hour, AVG , Max & total value of Active , reactive & apparent power & span shot of power ( KW) , current (I) , Voltage (V) & PF with programmable CT Ratio of -/5A along with Suitable size core CTs for current sensing (c)Indication lamp 22.5mm dia LED type 240 volts AC to show three phase availability-01Set.(d) Copper bus bar three phase400 Amp- Set of 4 Nos.OUTGOING(a) MCCB 160Amps 18 KA rating 4 pole 440 volts fixed type -01 No(b) MCCB 100Amps 18 KA rating 4 pole 440 volts fixed type -01 No(c) MCCB 63Amps 18 KA rating 4 pole 440 volts fixed type -03 No 58 Supply, installing,testing and commissioning factory made (incl CPRI type test certified), LT feeder pillar box (KIOSK), outdoor type plate form mounted suitable for 415 volts 3 phase and netural suitable for 4 wire 50 Hz AC supply system having bus bar chamber with insulated Copper bus bar 400 Amp rating not less than 60 cm long installed on porcelain insulators.The panel shall be dust and vermin proof, IP 65 class protection and made of 3.15 mm CRCA MS sheet and 40x40x6mm thick angle iron frame work, powder coated finish, frontand rear opening type with aprons for cable entry, with double door shutter and locking arrangement (including provn of 65 mm Godrej (Freedom) lock with 2 keys, internal wiring with suitable size of copper strip from bus bar to MCCB and metering wiring with PVC insulated, stranded copper conductor, FRLS Cable, IS-694 marked of adequate size but not less than 4 sqmm with 45cm height from ground level with PCC foundatioin in 1:4: 8 type D-2 complete the following accessories :-( Panel 2) 59 INCOMING:-(a) MCCB 250 Amp 25KA rating 4 Pole 440 voltswith megnatic setting and thermal release- 01 No(b)Multifunction meter Class, 1.0, Three line Bakelite LCD Display with back sealing arrangement , with meter run hour & power on Hour, AVG , Max & total value of Active , reactive & apparent power & span shot of power ( KW) , current (I) , Voltage (V) & PF with programmable CT Ratio of -/5A along with Suitable size core CTs for current sensing (c)Indication lamp 22.5mm dia LED type 240 volts AC to show three phase availability-01Set.(d) Copper bus bar three phase400 Amp- Set of 4 Nos.OUTGOING(a) MCCB 160Amps 18 KA rating 4 pole 440 volts fixed type -01 No(b) MCCB 100Amps 18 KA rating 4 pole 440 volts fixed type -01 No(c) MCCB 63Amps 18 KA rating 4 pole 440 volts fixed type -02 No 60 Supply, installing,testing and commissioning factory made (incl CPRI type test certified), LT feeder pillar box (KIOSK), outdoor type plate form mounted suitable for 415 volts 3 phase and netural suitable for 4 wire 50 Hz AC supply system having bus bar chamber with insulated Copper bus bar 300 Amp rating not less than 60 cm long installed on porcelain insulators.The panel shall be dust and vermin proof, IP 65 class protection and made of 3.15 mm CRCA MS sheet and 40x40x6mm thick angle iron frame work, powder coated finish, frontand rear opening type with aprons for cable entry, with double door shutter and locking arrangement (including provn of 65 mm Godrej (Freedom) lock with 2 keys, internal wiring with suitable size of copper strip from bus bar to MCCB and metering wiring with PVC insulated, stranded copper conductor, FRLS Cable, IS-694 marked of adequate size but not less than 4 sqmm with 45cm height from ground level with PCC foundatioin in 1:4: 8 type D-2 complete the following accessories :-( LT Panel 3) 61 INCOMING:-(a) MCCB 250 Amp 25KA rating 4 Pole 440 voltswith megnatic setting and thermal release- 01 No(b)Multifunction meter Class, 1.0, Three line Bakelite LCD Display with back sealing arrangement , with meter run hour & power on Hour, AVG , Max & total value of Active , reactive & apparent power & span shot of power ( KW) , current (I) , Voltage (V) & PF with programmable CT Ratio of -/5A along with Suitable size core CTs for current sensing (c)Indication lamp 22.5mm dia LED type 240 volts AC to show three phase availability-01Set.(d) Copper bus bar three phase300 Amp- Set of 4 Nos.OUTGOING(a) MCCB 125Amps 18 KA rating 4 pole 440 volts fixed type -01 No(b) MCCB 63Amps 18 KA rating 4 pole 440 volts fixed type -03 Nos 62 Supply, install, testing & commissioning LT feeder pillar box (KIOSK) outdoor type, plateform mounted, compartmentalised and confirming to IP-54 suitable for 415 Volts 3 phase 4 wire, 50 Hz AC supply system all as specified and directed having busbar chamber with insulated copper busbars 100 Amps rating installed on porcelein insulators. The panel shall be dust and vermin proof, made of 3.15 mm CRCA MS sheet and with base frame of 40x40x5 mm angle iron, powder coated finish over two coat of red oxide primer, front and rear opening type with aprons for cable entry with double door shutter and locking arrangement including a lock with two keys, internal wiring with PVC insulated multi stranded copper conductor cable,FRLS cables ISI marked of adequate size but not less than 2.5 Sqmm. The scope of work also includes following alongwith PCC foundation complete all as specified and directed:-(Street Light Panel) 63 (a)Astronomical time switch - 01 No(b) 4 pole 32 Amp contactor- 01 No(c) 4 Pole 6 Amp MCCB-04 Nos.(d) Toggle Switch - 01 No(e) Glass Fuses(f) Neutral link(g) Push Buttons(h)LED indicating lamps (R, Y & B) -01 Set. 64 Supply,install,testing & commissioning automatic power factor correction (APFC) panel of 230 KVAR with metalised polypropylene capacitor bank MPP heavy duty of following capacity or nearest higher suitable to make step banking as per load requirement with minimum 12 steps intelligent relay controller having provision of multifunctional LCD display, set optimising control of capability with having facility of display system voltage, reactive power, active power apparent powerapparent current total harmonic display VTHD, ITHD plus individual harmonic display of voltage and current temperaturewith alarm out put including alarm system and front panel programming including connection with PVC copper conductor cable of suitable size housed in powder coated PBI sheet housing with hinged door dust proof and connecting with main etc. all as directed with following components (All components & capacitor bank shall be housed in enclosure factory made out of 16 SWG MS sheet outdoor in installation KIOSK type dust and vermin proof with suitable ventillating shutters (louvers) powder coated sheet metal feeder pillar box as per IS-5039 all as specified having locking arrangement , set of CTs Discharge reactors contactor heavy duty 4 pole 415 Volt with AC coil including MCBs indicating lamps and bypass system Alarm bell 240 volts 50 Hz -01 No. etc complete to achieve point 0.99/1.0 near to unity including necessary foundation pillar type copper bus bar of suitable size 3 phase system etc complete all as specified and directed. 65 Boring under roads/pavement/hardstanding without disturbing the top surface by trench less technology using ultra sound technique and necessary machine including HDPE pipe of 150 mm dia suitable for 0.4 mpa working pressure forpassing through the cables complete all as specified and as directed. Note : Necessary infrastructure reqd for boring shall be arranged by the Contractor at his own cost. 66 Supply and erecting cable route marker for HT Cable made of precast RCC (1:2:4) using 20mm graded stone aggregate cast in pillar of size 20x15x75cm including reinforcement with 4 nos 10mm dia deframed bars of 55 cm length and link/stirupps of 8mm dia bras at 150mm C/C and in fixing in ground level duly pained &written HT 11 KV including PCC & earth work etc complete all as specified anddirected by Engr-in-charge. 67 Supply and erecting cable route marker for LT Cable made of precast RCC (1:2:4) using 20mm graded stone aggregate cast in pillar of size 15x10x60cm including reinforcement with 4 nos 10mm dia deframed bars of 55 cm length and link/strapps of 8mm dia bras at 150mm C/C and in fixing in ground level duly pained &written LT .433 KV including PCC & earth work etc complete all as specified anddirected by Engr-in-charge. 68 S&F copper service wire 1.5 sqmm 3 core PVC insulated and PVC round sheathed multistranded copper conductor flexible industrial cable 1100 V grade in street light poles complete all as specified and directed. 69 S&F forSMC street light control box of size 300 x 200 x105 mm including aluminium bus bar of adequate capacity and one no. MCB SP 16 Amps 230 volts including connecting up with the electrical connections and fixing and clampingincluding taking out old Unsv junction box etc complete all as specified and directed at site by Engineer-in-charge. 70 Supply, install, testing & commissioning LT feeder pillar box (KIOSK) outdoor type, plateform mounted, compartmentalised and confirming to IP-54 suitable for 415 Volts 3 phase 4 wire, 50 Hz AC supply system all as specified and directed having busbar chamber with insulated copper busbars 63 Amps rating not less than 60cm long installed on porcelein insulators. The panel shall be dust and vermin proof, made of 3.15 mm CRCA MS sheet and with base frame of 40x40x5 mm angle iron, powder coated finish over two coat of red oxide primer, front and rear opening type with aprons for cable entry with double door shutter and locking arrangement including a lock with two keys, internal wiring with PVC insulated multi stranded copper conductor cable,FRLS cables ISI marked of adequate size but not less than 2.5 Sqmm. The scope of work also includes following alongwith PCC foundation complete all as specified and directed 71 LIGHTING PROTECTIONS&F forceramic/ bakelite insulator base for supporting aluminium strip complete on roof surface/ wall surfaceof lightning protection system etc complete all as specified and directed. 72 SUMMER APPLIANCES & AIR CONDITIONINGSupply and fixing Voltage stablizer for automatic operation single phase naturally air cooled indoor type and designed for input variatiion between 170 volts to 250 volts with output voltage stabilized at 230 volts with accuracy of+/- 2.5% of capacity 1 KVA. etc complete all as specified and directed. 73 Supply and fixing Single door refrigerator electric driven single phase 230 volts, AC 50 Hz,of capacity 195 litre or next available higher capacity with BEE approved, 5 star rating with inbuilt stablizer complete including electric connection etc complete all as specified and directed. 74 Design, supply, installation, testing and commissioning of central air conditioning plant of working capacity not less than 25/26 TR (2x25/26 TR working + 1x25/26 TR standby) (As per standard design) to achieve the parameter as mentioned below including all civil works, mechanical, electrical unit and other allied equipments as per OEM comprising the following:(a) The desired temperature in air conditioning area ranges from 22(+/- 5) degree centigrade, humidity 55 (+/- 10) %.(b) Supply , install , commissioning and testing of Water Cooled Scroll Chillers, with multi compressors, comprising of Semi -Hermetic/Hermetic/ Open Type Compress ors, DX Evaporator, Shell and Tube Condenser,suitable expansion device,suitable for operation on R - 22 /R - 407 C/R 410a refrigerants and of nominal capacity.(c) The chilling machine shall be shell and tube condensor type, suitable expansion device, suitable for operation on R407c/ R 410a refrigerants and fitted with built in safety devices like HP/LP cut outs, oil pressure switch, cooler freeze protection, high discharge gas temperature cut outs, earth fault protection for compressor against erratic power supply (under voltage, over voltage, phase reversal, phase imbalance and protection against short circuitting & overloading)(d) The chilling machine is to be designed to operate at high ambient temperature & refrigerant piping shall be seamless, copper tubes formed on hydraulic bending dies to minimise blazed joints thereby ensuring a high level refrigent circuit tightness, with antifreeze/glycol. The chiller shall be installed on necessary RCC/PCC/ISMB foundation with vibration isolation pads to minimise vibration. 75 Supply, installation, commissioning and testing of monoblock centrifugal pump (2W+1S) of capacity 66 USGPM (approx) discharge at 15 mtr head with electric motor AC 3 phase 415 V/440V 50Hz, cap 5 HP complete for chilled water, including MS channel with suitable antivibration pad and finishing to foundation work as required at site and connect with suction/discharge pipe lines etc complete all as specified and directed. 76 Supply, installation, commissioning and testing of monoblock centrifugal pump (2W+1S) of cap acity 104 USGPM (approx) discharge at 20 mtr head with electric motor AC 3 phase 415 V/440V 50Hz, cap 5 HP complete for condensor water, including MS channel with suitable anti vibration pad and finishing to foundation work as required at site and connect with suction/discharge pipe lines etc complete all as specified anddirected. 77 Supply, installation, commissioning and testing of induced drafttop discharge counterflow type FRP cooling tower (Rectagular /round bottle shape) suitable for capacity 60 TR AC plant with FRP body and base, water spray headers, cooling tower fills, fan with motor, MS ladder upto groung level, making suction and discharge pipe line connection including support baserames/foundation work as per manufacturers standard instructions necessary RCC stagging/foundation etc complete all as specified and directed. 78 Supply, installation, commissioning and testing of factory built double skinned, sandwiched with 25mm fiberlass/thermo coal/puff insulation, section type horizontal AHUs with six row, deep coil suitable for 50/52 TR. AHU is to be fabricated out of powder galvanised steel sheet 24 gauge casing inner and outer with Penta Post type construction. The cooling coil shall have internally hatched copper tubes and dual sine wave aluminium fins with insulated drain pan. The blower section shall be completed with draw through type backward curved blower with TEFC type blower motor of suitable size with belt drive. The AHUs shall have high velocity pre-filters prior to cooling coil, spray type humudifier with suitable type pump motor, drift eliminator, capacity not less than 20000 CFM, complete with micron filters, PVC square type with humidification tank, humidity state digital thermostat, fire damper with fuible link, air damper manually operated, canvas connection MS/copper pipe and fitting as required, plenum chamber including inspection window and sitable size control cable for blower motor / heater/ humidity pump with suitable size of cable tray, foundation work, anti vibration pad, MS angle supports and other connected work, safety devices/controls as required at site and connect with suction / discharge pipe line including cutting welding work and required civil work, including air mixing chamber if required at site complete and all electrical equipment to be connectedcomplete all as specified and directed. 79 Supply and installation of the winter heating system with monsoon re heating with hot water Generator 35 KW with 2 Nos pump (1w+1s) alongwith making necessary connections etc complete all as specified and directed.(For Humidity control / winter heating) 80 Supply and fixing of 100 mm bore mild steel C grade pipe (heavy duty) including cutting and welding work complete including with fittings such as bend, tee, elbow, union, reducer etc as required at site and 25 mm nitrile sheet for thermallynsulated with elastomeric insulation of appropriate thickness wrapped with water-proof cloth complete all as specified and directed for Chiller pipe line and synthetic enamel paint for condender piping.etc complete all as specified and directed. 81 Supply and fixing of 80 mm bore mild steel C grade pipe (heavy duty) including cutting and welding work complete including with fittings such as bend, tee, elbow, union, reducer etc as required at site and 25 mm nitrile sheet for thermallynsulated with elastomeric insulation of appropriate thickness wrapped with water-proof cloth complete all as specified and directed for Chiller pipe line and synthetic enamel paint for condender piping.etc complete all as specified and directed. 82 Supply and fixing of 65 mm bore mild steel C grade pipe (heavy duty) including cutting and welding work complete including with fittings such as bend, tee, elbow, union, reducer etc as required at site and 25 mm nitrile sheet for thermallynsulated with elastomeric insulation of appropriate thickness wrapped with water-proof cloth complete all as specified and directed for Chiller pipe line and synthetic enamel paint for condender piping. etc complete all as specified and directed. 83 Supply and fixing of 50 mm bore mild steel C grade pipe (heavy duty) including cutting and welding work complete including with fittings such as bend, tee, elbow, union, reducer etc as required at site and 25 mm nitrile sheet for thermallynsulated with elastomeric insulation of appropriate thickness wrapped with water-proof cloth complete all as specified and directed for Chiller pipe line and synthetic enamel paint for condender piping. etc complete all as specified and directed. 84 Supply and install butterfly valve of CI of 100 mm borein the water pipe lines by providing flanges, short pieces of mild steel pipes, gaskets, nut bolts and washers etc complete all as specified and directed. 85 Supply and install butterfly valve of CI of 80 mm borein the water pipe lines by providing flanges, short pieces of mild steel pipes, gaskets, nut bolts and washers etc complete all as specified and directed. 86 Supply and install butterfly valve of CI of 65 mm borein the water pipe lines by providing flanges, short pieces of mild steel pipes, gaskets, nut bolts and washers etc complete all as specified and directed. 87 Supply and install butterfly valve of CI of 50 mm borein the water pipe lines by providing flanges, short pieces of mild steel pipes, gaskets, nut bolts and washers etc complete all as specified and directed. 88 Supply and install Non return valve (NRV) of CI of 80mm bore in the water pipe lines by providing flanges, short pieces of mild steel pipes, gaskets, nut bolts and washers complete all as specified and directed. 89 Supply and install Non return valve (NRV) of CI of 65mm bore in the water pipe lines by providing flanges, short pieces of mild steel pipes, gaskets, nut bolts and washers complete all as specified and directed. 90 Supply and install Non return valve (NRV) of CI of 50mm bore in the water pipe lines by providing flanges, short pieces of mild steel pipes, gaskets, nut bolts and washers complete all as specified and directed. 91 Supply and fixing Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both endsfor iron pipe or for unions and fixed of dia 20 mm complete all asspecified and directed. 92 Supply and fixing Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both endsfor iron pipe or for unions and fixed of dia 15 mm complete all asspecified and directed. 93 Supply and fixing Mild steel pot strainer of 100 mm bore in the pipe line including cutting/welding work as required at site for accommodation of MS pot strainer complete all as specified and directed. 94 Supply and fixing new Mild steel Y-strainer of 80 mm bore in the pipe line including cutting/welding work as required at site for accommodation of MS pot strainer complete all as specified and directed. 95 Supply and fixing new Mild steel Y-strainer of 65 mm bore in the pipe line including cutting/welding work as required at site for accommodation of MS pot strainer complete all as specified and directed. 96 Supply and fixing new Mild steel Y-strainer of 50 mm bore in the pipe line including cutting/welding work as required at site for accommodation of MS pot strainer complete all as specified and directed. 97 Supply and install pressure gauge in the pipe lines suitable for dia 15 mm pipe complete all as specified and directed.Note:- Size of pressure gauge shall be provided as per OEM ecommendation. 98 Supply and install thermometers in the pipe line suitable for dia 15 mm complete all as specified and directed.Note:- Specification of thermometers shall be as per OEM recommendation. 99 Supply, assembly and erection of PGI sheet with TDF flange/ C&SS rectangular/square duct made out of L shaped hollow profile,duly factory boxed, incl all accessories such as corner, cleat, carriage bolt, gasket and appropriate sealent on longitudenal joints etc complete of thickness 22 gauge sheet complete all aspecified and directed. 100 M&L for duct insulation with 25 mm thick open cell nitrile rubber (Class 1) material of density 140-180 kg / m³ & thermal conductivity of 0.047 W/mK having anti fungal and antimicrobial properties as specified and including the following:(a) M&L for cleaning the duct surface (to be insulated) by scrapping carefully with wire brush etc. to make the surface completely free of millscale, dirt, dust, grease and other foreign materials, taking special care so that all duct joints are sealed against any leakage.(b) M&L for applying rubber based adhesive CPRX compound.(c) M&L for sealing of all longitudenal joints and circular overlaps with and including Aluminium foil tape 50 mm wide, to make the insulation leak proof.(d) M&L for securing the insulation with and including mechanically fastened nylon / steel straps of size 12 mm / 50 mm complete all aspecified and directed. 101 M&L for wraping glass cloth incl UV chemical coating over nitrilebber for exposed ducts for better mechanical protection andnsulation from sunlight for complete all as specified and directed.Note:- Thickness of glass cloth shall be provided as per OEM 102 M&L for suitable size of supply air grills as per manufacturers design with extruder aluminium powder coated with air volume control and bird screen dampers complete all as specified and directed.Note:- Size and type of air grills alongwith air volume shall be 103 Providing suitable size of return air grills as per manufacturers design with extruder aluminium powder coated without air volume control and with bird screen dampers complete all as specified and directed.Note:- Size of return air grills shall be provided as per OEM 104 Supply, install, testing and commissioning of LT control panel board, cubical type 415 Volt, 3 phase, 50 Hz, indoor type, floor mounted,weather proof fabricated out of 2.0 mm CRCA sheet, duly compartmentalized, cable ally, spray painted with powder coated paint and comprising of the following :-(a) MCCB 4 pole 250 amp, 415 volt, 25 KA - 01 No (Incommer)(b) MCCB 4 pole 100 amp, 415 volt, 16 KA - 03 No (Outgoing for 2 chiller unit and one spare)(c) MCCB 4 pole 40 amp, 415 volt, 16 KA - 03 No (Outgoing for cooling Tower, AHU and hot water generator)(d) MCCB 4 pole 25 amp, 415 volt, 16 KA - 08 No (Outgoing for 8 pumps)(e) Starter of suitable size and capacity including contactor, relay, timer, push button - 10 Nos (for 8 pumps, cooling tower motor, AHU blower motor etc)(f) Volt meter (0-500V) three phase, digital type with inbuiltselector switch -01 No .(g) Ammeter(0-500A) three phase, digital type with inbuiltselector switch with suitable capacity of CTs - 01 set.(h) ON/OFF indication LED lamp - Set of 03.(j) Single phase preventor - 10 Nos (for pumps, cooling towermotor, blower etc)(k) Grouting of panel including PCC foundation as required.(l) 4 Nos electrolytic copper bus bars of high conductivity proper insulated of 1 ½ times of the incoming capacity with provision of extension and mounting on porcelain support.(m) MCB SPN 20A -01 No (for 3 way valve) 105 Supply and install 3 way valve of CI of size 80 mm dia in the water pipe lines for AHU by providing flanges, short pieces of mild steel pipes, gaskets, nut bolts and washers incl making connection from panel with suitable size cable complete all as specified and directed. 106 DG SETSupply install testing and commissioning of diesel Engine driven generating set 82.5 KVA capacity, 3 phase, 4 wire, 440 V, 1500 RPM, 50 Hz power supply with power factor 0.8 coupled directly to alternator mounted on a common base plate complete with integrated acoustic enclosureshaving salient features modular bolted construction with fabrication on imported CNC turrert punch machines, Nine tank treatment process with pure polyester based powder coating to ensure long life in all weather conditions and for outdoor application/installation. Integrated design thereby facilitating/easy handling installation and shifting oftheeqpt at site.The designof integrated acoustic enclosure should be of type approvedby National physical laboratory as per central pollution control board (CPCB) latest norms/regulation with fuel tank, battery and standard accessories including cost of PCC (1:2:4) type B-1foundation for(acoustic enclosures foundation Height shall be 800 mm out of which 500 mm shall be above ground level) as recommended by manufacturer ,Vibration pad sand cushioning around PCC foundation etc all and Tools and spares as provided bymanufacturer all as specified and as directed with the following specifications :-. 107 (A)ENGINE :Water cooled with radiator diesel Engine (confirming to IS : 10001/10002)of 1500 RPM capacity to match the 82.5 KVA alternator under NTP conditions with provisionof 10% overload for 1 hour in every 12 hours runningconforming toIS 6514/ IS 10001 / 10002 the Engine shall consist of the following:-(i) Fly wheel(ii) Flexible coupling with guard bolts and nuts etc(iii) Air cleaner heavy duty dry type(iv) Radiator with guard and water pump engine mounted(v) Dynamo of suitable capacity.(vi)Air cleaner heavy duty dry. 108 (vii) Fuel injection pump.(viii)Radiator fan (Blower type) with guard.(ix) Electronic/ A1 class governor.(x)Fuel filter (Mounted).(xi) Lubricating oil filter (mounted).(xii)12V self regulating alternator belt driven by engine.(xiii)Exhaust silencer heavy duty residential type(xiv)Corrosion resistor / scale inhibitor.(xv) Starter 12 VDC.(xvi)Lubricating oil cooler.(xvii) Lubricating oil pump (Gear type).(xviii)Turbo Charger(xix)Exhaust piping shall be insulated with asbestos rope duly cladded with aluminum sheet.xx)Instrument panel complete with the following:-(a) Auto manual starting switch with key.(b)Lubricating oil temperature gauge.(c) Lubricating oil pressure gauge.(d) Water temperature gauge.(e) Battery charging ammeter.(f) Battery charging indicating lamp.(g) Hour meter with RPM indicator.(h) Safety control against high temperature of water.(i) Safety control against high temperature of water.(j) Safety control against low lubricating oil pressure.(k) Over speed stop with double driven adaptor.(l) Over load 109 (B) BRUSH LESS ALTERNATOR(i)Alternator coupled to Engine through a flexible coupling to an indigenous alternator mounted on strong steelfabricated base frame suitable for mounting on a permanent foundation brushless alternator shall be conforming to BS-2613 or relevant IS-13364(ii) Type:- Self excited self regulated with automatic voltage regulator.(iii)Rating:- 82.5 KVA at 0.8 PF lagging 4 pole horizontal at NTP condition 3(iv) Speed:- 1500 RPM(v)System:- 415 Volts +/- 2.5% AC 3 Phase 4 wire 50 Hz. 110 (vi) Connection :-4 wire star connected.(vii) Enclosure :-Screen protected dip proof.(viii)Ventilation :-Self ventilated(ix)Insulation :-Insulation Class H(C) CONTROL PANELPanel forDG set factory fabricated & factory assembled out of sheet steel 2 mm thick, suitable for floor mounting, with suitable rated bus-bar made of copper strip, internal wiring and with copper conductor and labeling fuses with provision for connecting incoming/out going leads with the following accessories duly powder coated with following accessories:- (i) Incoming MCCB 4 pole 125 A 35 KA-1 Nos& bus bar of suitable capacity.(ii) DG set controller Microprocessor based graphical LCD display for monitoring and diagnostic all function of DG set with complete accessories (iii)DigitalAmmeter with CT and selector switch.(iv) DigitalVoltmeter0- 500 V.(v) LCD Display CT Operated 3 phKWH meter.(vi) Selector switch.(vii)Push button start stop reset(viii) Indicator lamps. 111 (ix) Battery charger internally fitted to charge batteries from mains(x) Transformer & rectifier.(xi) DC Volt meter & Ampere meter(xii) Charge rate selector trickle charge or high charge.(xiii) Indicator lamp battery(xiv) Changeover switch of suitable capacity.(D) AMF Panel cum Protection :- Separate Outdoor type AMF panel for automatic ON during power failure and off while power is on with adjustable time delay, panel totally enclosed fabricated out of CRCA sheet 3.15mm thick , over an angle iron frame made out of 50 x 50 x 6 mm anglewith removable side cover hinged front panel and rear panel of easyaccessibility complete withinternal wiring of suitable size copper conductor cable and cable glands for external connection and comprising of following :-(i) AMF relay &power contactors of suitable rating forautomatic starting on mains failure- 1 set 112 (ii) Digital type Frequency meter -1Nos(iii) RPM meter -1Nos(iv) Under Voltage relay-1No(v) Over voltage relay- 1No (vi) Reverse power relay- 1NO(vii) Trivector meter-1No(viii)Energy analyzer with CT- 1No(ix) Earth fault protection-1Nos(x) Under/Over frequency relay- 1No(xi) HRC type instruments fuses(xii) Copper bus bar of suitable size(E) FUEL TANK :- One No of sheet steel 14 SWG and capacity to hold diesel sufficient for running 16 hrs running at full load including necessary piping.(i) Level indicator on fuel tank(ii) Drain plug(iii) MS class C piping for inlet from pump to tank of engine(iv) Fuel strainer(v) Air vent. 113 (F)BATTERYAs recommended by manufacturers(G) Acoustic enclosure- Acoustic Enclosure suitable for 82.5 KVA DG set as under.i) Fabricated out of CRCA sheet of suitable thickness not less than 1.6mm. Polyester based powder coated internally and externally with lockable type door handle. All nuts and handles shall be zinc coated.ii) The doors are gasket with EPDM gaskets. The construction should be such that it prevent entry of rain water splashing in to enclosure and allows free and quick flow of rain water to the ground in the event of heavy rain,iii) Sound proofing with high quality rock wool/mineral wool confirming to IS 8183 ofdensity at 96 Kg /M3 covered with fiber glass cloth and perforated powder coats sheet specially designed alienators (Sound controller) at air entry and exit of the container noise level shall be not exceed 75 Db at 1 meter distance as per CPCB norms. iv) Adequate ventilation to meet air requirement for combustion and heat removal with provn of a blower. v) Emergency stop push button outside the container. 114 vi) Provn of light inside the canopy providing of FTL fitting 1x20 watt with wiring and control switch.vii) The canopy should be provided with height enclosure temperature safety device.(H) BASE PLATESturdy, fabricated welded construction out of MS channels ISMC of suitable size suitable for fixing of DG set, required anti-vibration mounting pads shall be provided all specified by the manufacturer.Note:- (i) DG setplatform is deem to be included with quoted rate The size / design ofplatform provided as per manufacturer recommendation . 115 Supply install testing and commissioning of diesel Engine driven generating set 25 KVA capacity, 3 phase, 4 wire, 440 V, 1500 RPM, 50 Hz power supply with power factor 0.8 coupled directly to alternator mounted on a common base plate complete with integrated acoustic enclosureshaving salient features modular bolted construction with fabrication on imported CNC turrert punch machines, Nine tank treatment process with pure polyester based powder coating to ensure long life in all weather conditions and for outdoor application/installation. Integrated design thereby facilitating/easy handling installation and shifting oftheeqpt at site.The designof integrated acoustic enclosure should be of type approvedby National physical laboratory as per central pollution control board (CPCB) latest norms/regulation with fuel tank, battery and standard accessories including cost of PCC (1:2:4) type B-1foundation for(acoustic enclosures foundation Height shall be 800 mm out of which 500 mm shall be above ground level) as recommended by manufacturer ,Vibration pad sand cushioning around PCC foundation etc all and Tools and spares as provided bymanufacturer all as specified and as directed with the following specifications :-. 116 (A)ENGINE :Water cooled with radiator diesel Engine (confirming to IS : 10001/10002)of 1500 RPM capacity to match the 25 KVA alternator under NTP conditions with provisionof 10% overload for 1 hour in every 12 hours runningconforming toIS 6514/ IS 10001 / 10002 the Engine shall consist of the following:-(i) Fly wheel(ii) Flexible coupling with guard bolts and nuts etc(iii) Air cleaner heavy duty dry type(iv) Radiator with guard and water pump engine mounted(v) Dynamo of suitable capacity.(vi)Air cleaner heavy duty dry. 117 (vii) Fuel injection pump.(viii)Radiator fan (Blower type) with guard.(ix) Electronic/ A1 class governor.(x)Fuel filter (Mounted).(xi) Lubricating oil filter (mounted).(xii)12V self regulating alternator belt driven by engine.(xiii)Exhaust silencer heavy duty residential type(xiv)Corrosion resistor / scale inhibitor.(xv) Starter 12 VDC.(xvi)Lubricating oil cooler.(xvii) Lubricating oil pump (Gear type).(xviii)Turbo Charger(xix)Exhaust piping shall be insulated with asbestos rope duly cladded with aluminum sheet.xx)Instrument panel complete with the following:-(a) Auto manual starting switch with key.(b)Lubricating oil temperature gauge.(c) Lubricating oil pressure gauge.(d) Water temperature gauge.(e) Battery charging ammeter.(f) Battery charging indicating lamp.(g) Hour meter with RPM indicator.(h) Safety control against high temperature of water.(i) Safety control against high temperature of water.(j) Safety control against low lubricating oil pressure.(k) Over speed stop with double driven adaptor.(l) Over load 118 (B) BRUSH LESS ALTERNATOR(i)Alternator coupled to Engine through a flexible coupling to an indigenous alternator mounted on strong steelfabricated base frame suitable for mounting on a permanent foundation brushless alternator shall be conforming to BS-2613 or relevant IS-13364(ii) Type:- Self excited self regulated with automatic voltage regulator.(iii)Rating:- 25 KVA at 0.8 PF lagging 4 pole horizontal at NTP condition 3(iv) Speed:- 1500 RPM(v)System:- 415 Volts +/- 2.5% AC 3 Phase 4 wire 50 Hz. 119 (vi) Connection :-4 wire star connected.(vii) Enclosure :-Screen protected dip proof.(viii)Ventilation :-Self ventilated(ix)Insulation :-Insulation Class H(C) CONTROL PANELPanel forDG set factory fabricated & factory assembled out of sheet steel 2 mm thick, suitable for floor mounting, with suitable rated bus-bar made of copper strip, internal wiring and with copper conductor and labeling fuses with provision for connecting incoming/out going leads with the following accessories duly powder coated with following accessories:- (i) Incoming MCCB 4 pole 63 A 35 KA-1 Nos& bus bar of suitable capacity.(ii) DG set controller Microprocessor based graphical LCD display for monitoring and diagnostic all function of DG set with complete accessories (iii)DigitalAmmeter with CT and selector switch.(iv) DigitalVoltmeter0- 500 V.(v) LCD Display CT Operated 3 phKWH meter.(vi) Selector switch.(vii)Push button start stop reset(viii) Indicator lamps. 120 (ix) Battery charger internally fitted to charge batteries from mains(x) Transformer & rectifier.(xi) DC Volt meter & Ampere meter(xii) Charge rate selector trickle charge or high charge.(xiii) Indicator lamp battery(xiv) Changeover switch of suitable capacity.(D) AMF Panel cum Protection :- Separate Outdoor type AMF panel for automatic ON during power failure and off while power is on with adjustable time delay, panel totally enclosed fabricated out of CRCA sheet 3.15mm thick , over an angle iron frame made out of 50 x 50 x 6 mm anglewith removable side cover hinged front panel and rear panel of easyaccessibility complete withinternal wiring of suitable size copper conductor cable and cable glands for external connection and comprising of following :-(i) AMF relay &power contactors of suitable rating forautomatic starting on mains failure- 1 set 121 (ii) Digital type Frequency meter -1Nos(iii) RPM meter -1Nos(iv) Under Voltage relay-1No(v) Over voltage relay- 1No (vi) Reverse power relay- 1NO(vii) Trivector meter-1No(viii)Energy analyzer with CT- 1No(ix) Earth fault protection-1Nos(x) Under/Over frequency relay- 1No(xi) HRC type instruments fuses(xii) Copper bus bar of suitable size(E) FUEL TANK :- One No of sheet steel 14 SWG and capacity to hold diesel sufficient for running 16 hrs running at full load including necessary piping.(i) Level indicator on fuel tank(ii) Drain plug(iii) MS class C piping for inlet from pump to tank of engine(iv) Fuel strainer(v) Air vent. 122 (F)BATTERYAs recommended by manufacturers(G) Acoustic enclosure- Acoustic Enclosure suitable for 25 KVA DG set as under.i) Fabricated out of CRCA sheet of suitable thickness not less than 1.6mm. Polyester based powder coated internally and externally with lockable type door handle. All nuts and handles shall be zinc coated.ii) The doors are gasket with EPDM gaskets. The construction should be such that it prevent entry of rain water splashing in to enclosure and allows free and quick flow of rain water to the ground in the event of heavy rain,iii) Sound proofing with high quality rock wool/mineral wool confirming to IS 8183 ofdensity at 96 Kg /M3 covered with fiber glass cloth and perforated powder coats sheet specially designed alienators (Sound controller) at air entry and exit of the container noise level shall be not exceed 75 Db at 1 meter distance as per CPCB norms. iv) Adequate ventilation to meet air requirement for combustion and heat removal with provn of a blower. v) Emergency stop push button outside the container. 123 vi) Provn of light inside the canopy providing of FTL fitting 1x20 watt with wiring and control switch.vii) The canopy should be provided with height enclosure temperature safety device.(H) BASE PLATESturdy, fabricated welded construction out of MS channels ISMC of suitable size suitable for fixing of DG set, required anti-vibration mounting pads shall be provided all specified by the manufacturer.Note:- (i) DG setplatform is deem to be included with quoted rate The size / design ofplatform provided as per manufacturer recommendation . 124 Supply install testing and commissioning of diesel Engine driven generating set 30 KVA capacity, 3 phase, 4 wire, 440 V, 1500 RPM, 50 Hz power supply with power factor 0.8 coupled directly to alternator mounted on a common base plate complete with integrated acoustic enclosureshaving salient features modular bolted construction with fabrication on imported CNC turrert punch machines, Nine tank treatment process with pure polyester based powder coating to ensure long life in all weather conditions and for outdoor application/installation. Integrated design thereby facilitating/easy handling installation and shifting oftheeqpt at site.The designof integrated acoustic enclosure should be of type approvedby National physical laboratory as per central pollution control board (CPCB) latest norms/regulation with fuel tank, battery and standard accessories including cost of PCC (1:2:4) type B-1foundation for(acoustic enclosures foundation Height shall be 800 mm out of which 500 mm shall be above ground level) as recommended by manufacturer ,Vibration pad sand cushioning around PCC foundation etc all and Tools and spares as provided bymanufacturer all as specified and as directed with the following specifications :-. 125 (A)ENGINE :Water cooled with radiator diesel Engine (confirming to IS : 10001/10002)of 1500 RPM capacity to match the 30 KVA alternator under NTP conditions with provisionof 10% overload for 1 hour in every 12 hours runningconforming toIS 6514/ IS 10001 / 10002 the Engine shall consist of the following:-(i) Fly wheel(ii) Flexible coupling with guard bolts and nuts etc(iii) Air cleaner heavy duty dry type(iv) Radiator with guard and water pump engine mounted(v) Dynamo of suitable capacity.(vi)Air cleaner heavy duty dry. 126 (vii) Fuel injection pump.(viii)Radiator fan (Blower type) with guard.(ix) Electronic/ A1 class governor.(x)Fuel filter (Mounted).(xi) Lubricating oil filter (mounted).(xii)12V self regulating alternator belt driven by engine.(xiii)Exhaust silencer heavy duty residential type(xiv)Corrosion resistor / scale inhibitor.(xv) Starter 12 VDC.(xvi)Lubricating oil cooler.(xvii) Lubricating oil pump (Gear type).(xviii)Turbo Charger(xix)Exhaust piping shall be insulated with asbestos rope duly cladded with aluminum sheet.xx)Instrument panel complete with the following:-(a) Auto manual starting switch with key.(b)Lubricating oil temperature gauge.(c) Lubricating oil pressure gauge.(d) Water temperature gauge.(e) Battery charging ammeter.(f) Battery charging indicating lamp.(g) Hour meter with RPM indicator.(h) Safety control against high temperature of water.(i) Safety control against high temperature of water.(j) Safety control against low lubricating oil pressure.(k) Over speed stop with double driven adaptor.(l) Over load 127 (B) BRUSH LESS ALTERNATOR(i)Alternator coupled to Engine through a flexible coupling to an indigenous alternator mounted on strong steelfabricated base frame suitable for mounting on a permanent foundation brushless alternator shall be conforming to BS-2613 or relevant IS-13364(ii) Type:- Self excited self regulated with automatic voltage regulator.(iii)Rating:- 30 KVA at 0.8 PF lagging 4 pole horizontal at NTP condition 3(iv) Speed:- 1500 RPM(v)System:- 415 Volts +/- 2.5% AC 3 Phase 4 wire 50 Hz. 128 (vi) Connection :-4 wire star connected.(vii) Enclosure :-Screen protected dip proof.(viii)Ventilation :-Self ventilated(ix)Insulation :-Insulation Class H(C) CONTROL PANELPanel forDG set factory fabricated & factory assembled out of sheet steel 2 mm thick, suitable for floor mounting, with suitable rated bus-bar made of copper strip, internal wiring and with copper conductor and labeling fuses with provision for connecting incoming/out going leads with the following accessories duly powder coated with following accessories:- (i) Incoming MCCB 4 pole 100 A 35 KA-1 Nos& bus bar of suitable capacity.(ii) DG set controller Microprocessor based graphical LCD display for monitoring and diagnostic all function of DG set with complete accessories (iii)DigitalAmmeter with CT and selector switch.(iv) DigitalVoltmeter0- 500 V.(v) LCD Display CT Operated 3 phKWH meter.(vi) Selector switch.(vii)Push button start stop reset(viii) Indicator lamps. 129 (ix) Battery charger internally fitted to charge batteries from mains(x) Transformer & rectifier.(xi) DC Volt meter & Ampere meter(xii) Charge rate selector trickle charge or high charge.(xiii) Indicator lamp battery(xiv) Changeover switch of suitable capacity.(D) AMF Panel cum Protection :- Separate Outdoor type AMF panel for automatic ON during power failure and off while power is on with adjustable time delay, panel totally enclosed fabricated out of CRCA sheet 3.15mm thick , over an angle iron frame made out of 50 x 50 x 6 mm anglewith removable side cover hinged front panel and rear panel of easyaccessibility complete withinternal wiring of suitable size copper conductor cable and cable glands for external connection and comprising of following :-(i) AMF relay &power contactors of suitable rating forautomatic starting on mains failure- 1 set 130 (ii) Digital type Frequency meter -1Nos(iii) RPM meter -1Nos(iv) Under Voltage relay-1No(v) Over voltage relay- 1No (vi) Reverse power relay- 1NO(vii) Trivector meter-1No(viii)Energy analyzer with CT- 1No(ix) Earth fault protection-1Nos(x) Under/Over frequency relay- 1No(xi) HRC type instruments fuses(xii) Copper bus bar of suitable size(E) FUEL TANK :- One No of sheet steel 14 SWG and capacity to hold diesel sufficient for running 16 hrs running at full load including necessary piping.(i) Level indicator on fuel tank(ii) Drain plug(iii) MS class C piping for inlet from pump to tank of engine(iv) Fuel strainer(v) Air vent. 131 (F)BATTERYAs recommended by manufacturers(G) Acoustic enclosure- Acoustic Enclosure suitable for 30 KVA DG set as under.i) Fabricated out of CRCA sheet of suitable thickness not less than 1.6mm. Polyester based powder coated internally and externally with lockable type door handle. All nuts and handles shall be zinc coated.ii) The doors are gasket with EPDM gaskets. The construction should be such that it prevent entry of rain water splashing in to enclosure and allows free and quick flow of rain water to the ground in the event of heavy rain,iii) Sound proofing with high quality rock wool/mineral wool confirming to IS 8183 ofdensity at 96 Kg /M3 covered with fiber glass cloth and perforated powder coats sheet specially designed alienators (Sound controller) at air entry and exit of the container noise level shall be not exceed 75 Db at 1 meter distance as per CPCB norms. iv) Adequate ventilation to meet air requirement for combustion and heat removal with provn of a blower. v) Emergency stop push button outside the container. 132 vi) Provn of light inside the canopy providing of FTL fitting 1x20 watt with wiring and control switch.vii) The canopy should be provided with height enclosure temperature safety device.(H) BASE PLATESturdy, fabricated welded construction out of MS channels ISMC of suitable size suitable for fixing of DG set, required anti-vibration mounting pads shall be provided all specified by the manufacturer.Note:- (i) DG setplatform is deem to be included with quoted rate The size / design ofplatform provided as per manufacturer recommendation . 133 CRANEDesign,supply, erection & installation, testing and commissioning indoor type, heavy duty, electrically operated,Double box girder type over head traveling Crane (EOT) designed & manufactured in accordance to IS-3177 of 1999 & IS-807 of 2006 and having motormain host:- 7.HP, Long Travel motor 2.00HP, Cross travel 1.0 HP, limit switch rotary + greavity, wheel double flanged, En +-9 Forged (Heat Treated) conforming to IS-2148, class-ll capable to handle 2.0 ton load (SWL)with centre to centre clear span 6 metres (cross travel), andlongitudinal travel 26 meters; suitable for operation on 415 volts 3 phase 4 wire AC supply system; with necessary steel supporting structure with clear hook height 4.0 metres from FFL; including all electrical components, control, Cables Safety Control etc, floor operated with moveable pendant control to be operated by means of push buttons from floor level independantly of crab position with protective panel including down shop lead (DS) trailing cable for CT motion and DSL of fastoon type with FRLSH cable for LT motion complete all as specified including painting with fire resistant, paint all as per manufacturers specification all as per standard norms for the technical parametres and specification. 134 (i) Considering large span of the crane, Fabrication work ofcrane girder can be done at site. The joint will however not to beprovided at the same points of maximum (ii). The wheel & hook should be coated with non-ferrous metal to avoid metal to metal contact. (iii). Required speed are as below:a) Host: Main speed 3m/min, Creep speed 1m/min. b) Cross travel: Main speed 10m/min, Creep speed 2m/min.c) Longitudinal travel: Main speed 10m/min, Creep speed 2m/min.(iv). Contractor/Manufacturer shall be provided dummy load for crane with the crane, the load shall be of SWL +25% overloads.(v). For load testing of cranes, load shall be arranged by contractor and shall be done as per prevailing IS. (vi) Rate of rail section deemed to be included in the quoted rates of crane.(vii). The cranes shall be inspected and certified by reputed firm at the premises of manufacturers/after installation at site. Note: The cost of girder deemed to be included in the quoted rate. 135 CRANEDesign,supply, erection & installation, testing and commissioning indoor type, heavy duty, electrically operated,Double box girder type over head traveling Crane (EOT) designed & manufactured in accordance to IS-3177 of 1999 & IS-807 of 2006 and having motormain host:- 20HP, Long Travel motor 3.00HP, Cross travel 3.0 HP, limit switch rotary + greavity, wheel double flanged, En +-9 Forged (Heat Treated) conforming to IS-2148, class-ll capable to handle 5.0 ton load (SWL)with centre to centre clear span 7 metres (cross travel), andlongitudinal travel 21 meters; suitable for operation on 415 volts 3 phase 4 wire AC supply system; with necessary steel supporting structure with clear hook height 2.0 metres from FFL; including all electrical components, control, Cables Safety Control etc, floor operated with moveable pendant control to be operated by means of push buttons from floor level independantly of crab position with protective panel including down shop lead (DS) trailing cable for CT motion and DSL of fastoon type with FRLSH cable for LT motion complete all as specified including painting with fire resistant, paint all as per manufacturers specification all as per standard norms for the technical parametres and specification. 136 (i) Considering large span of the crane, Fabrication work ofcrane girder can be done at site. The joint will however not to beprovided at the same points of maximum (ii). The wheel & hook should be coated with non-ferrous metal to avoid metal to metal contact. (iii). Required speed are as below:a) Host: Main speed 3m/min, Creep speed 1m/min. b) Cross travel: Main speed 10m/min, Creep speed 2m/min.c) Longitudinal travel: Main speed 10m/min, Creep speed 2m/min.(iv). Contractor/Manufacturer shall be provided dummy load for crane with the crane, the load shall be of SWL +25% overloads. (v). For load testing of cranes, load shall be arranged by contractor and shall be done as per prevailing IS. (vi) Rate of rail section deemed to be included in the quoted rates of crane.(vii). The cranes shall be inspected and certified by reputed firm at the premises of manufacturers/after installation at site. Note: The cost of girder deemed to be included in the quoted rate.
