|
| 1 | Taking down shutters of any description exc 1 Sqm but not exc 2 Sqm and Re-fixing in same opening complete all as specified and directed |
| 2 | Resecuring or easing & adjusting without taking down shutters of any description exc 1 sqm but n.exc 2 sqm each complete all as specified and directed |
| 3 | Taking down chowkat (without taking of shutter from the frame) not exc 1.5 sqm each including making good the disturbed surface in PCC (1:2:4) type B-0 or CM 1:3 complete all as specified and directed |
| 4 | All as per Item No 3 herein before but exc 1.50 sqm and not exc 4.00 sqm each |
| 5 | Taking down shutters of any description exc 1 Sqm but not exc 2 Sqm each all as specified and as directed |
| 6 | M & Lfor Solid PVC door frame (Single rebated) of size 60 mm x 30 mm made out of solid foam with homogeneous fine cellular structure having smooth outer integral skin with suitable metal stiffner and fixed with 100x8 sheet metal CSK screws complete all as specified and directed(Note :- Door frame shall be water proof, termite proof, elegant and should have excellent screws holding strength to fix hinges and hold doors properly for a long life) |
| 7 | M & L for Factory made Solid PVC Moulded Door Shutter28 to 30mm thick (stiles),wood free EPS with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification complete all as specified and as directed |
| 8 | S&F Second class hard wood plain, solid, straight chowkats and frames, wrought, frame rebated on the solid , rounded or chamfered, put tegether with glue pinned at joints etc complete all as specified and as directed |
| 9 | M & L for Pressed steel frames made of 1.25mm thick MS sheet of profile 105x60mm,for door and window frames with one or more rebate including lock strike plate, shock absorber, 20mm dia 60mm long MS conduit for housing of a drop bolt, treating of internal surfaces of chowkhats with coal tar or black paint including hinges, hold fasts/lugs etc complete all as specified & directed |
| 10 | All as per item No 9here-in-before but profile size 125x60mm with double rebate. |
| 11 | S&FFlush door shutters 35mm thick, factory made as per IS:2202 (Part-I 1999) solid core construction, with block board core with decorative face veneer both faces with lipping/frame to matchfixed to chowkhats all as speified and directed |
| 12 | S&F Second class hard wood 35 mm thickglazed and skeleton shuttersopen rebated and prepared to receive glass, gauze,etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass,etc, size of members of shutters as specified in SSR Part-1, Section 8, clause 8.24 (a) kiln seasoned and chemically pressure treated complete all as specified and as directed Note: Supply & fixing of 4 mm thick sheet glass or wire mesh be measured and paid separately. |
| 13 | S & F Second class hardwood Plain framed, panelled shutter (two panel) of 35mm thick with lock rail and panel of 9mm BWP commercial ply or 12mm venereed particle board with commercial veneering on both faces,size of rail and stile as per IS:1003 (Part-I), kiln seasoned and chemically pressure treateds fixed to chowkhat all as specified and as directed. |
| 14 | S&FMild steel work conforming to Fe-290 Gde-E-165 as in hold fast, made of flat iron, fabrication, etc completeall as specified & directed |
| 15 | M & L for powder coated (minimum thickness of powder coating 50 micron) aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified & directed. |
| 16 | M & L for Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screwscomplete all as specified & directed.(Note: Supply & fixing of 4 mm thick sheet glass or wire mesh be measured and paid separately). |
| 17 | S&F Aluminumventilators of size 500mm x 850 mm duly Powder coated (not less than 50miicron thick of any shade/colour as approved by GE) , adjustable without sash bars,4mm thick figured glass louversfixed in half portion,aluminum section weighing 0.55 kg/m including necessary jointing cleats, glazing clips, rubber packing, anodised aluminum snap beading, screws, including stainless steel wire cloth 0.36 nominal dia of wire and average width of aperture 1.18mm etc complete all as specified and directed. |
| 18 | M & L for powder coatedaluminium grill ( powder coated or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, weight not less than 2.507kg/sqm,including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement all as specified and as directed. |
| 19 | S&F Box type Steel Windows/Ventilators double side shutters (Windows side hung type , Ventilators top hung)pressed steel frames made out CRC Sheet of 80x60x1.25mm double rebated, Shutters box type made out of CRC Sheet of 40x20x1.0mm , windows & ventilator shutter fixed made of glass andgauge fixed with box type hinges, Aluminium die cast handles for glass shutters, Iron flat type handles for mesh shutters, Telescopic stays,etc complete all as specified incl 12mm square guard bars/grill welded with steel frame (100c/c horizontically) all as specified and directed.NOTE: (i) Quoted rate deemed to be included for steel frames, steel shutters and Guard bard/Grill, handle,hinges and locking arrangements etc.However unit rate quoted shall deemed to include cost of beading, fittings such as handles,hinges,Telescopic stays, locking arrangements and fixing of glass and wiremesh etc.(ii) Supply & fixing of 4 mm thick sheet glass or wire mesh be measured and paid separately. (Note : All Windows/Ventilator design as per CECZ TD drg No 539) |
| 20 | M & L for plain cement concrete (1:3:6) type C-0 using 12.50mm grade stone aggregate for filling of steel door frame/box type steel window/vent etc including necessary form work etc complete all as specified and directed. |
| 21 | Supply & fixGlassSheet4mm thick ordinary quality and glazing with oil putty or in wooden /steel /aluminium /rubber beading in square not exceeding 0.5 Sqm in each pane and all as specified & directed |
| 22 | Supply & fixGlass Sheet4mm thick ordinary quality and glazing with oil or in wooden /steel /aluminium /rubber beadingputty in square exceeding 0.5 Sqm in each pane and all as specified & directed |
| 23 | Supply & fixStainless steel wire cloth 0.36mm nominaldia and average width of aperture 1.40mm and fixed with tinned tack or galvanized wire staple all as directed fixed. |
| 24 | Dismantling of structural steel work including doors, gates but excluding framed truss etcall as specified & directed |
| 25 | S&FMild steel framed work as in doors or gates of angle or other sections with gusset plates, rails braces, etc complete drilled for fixing of steel sheeting or other covering, doors etc, to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings(exclusive of steel sheeting or other covering, running rails and guides) and hanging ; also fastening and fixing complete including painted with one shop coat of zinc chromate primer paint (including preparation of surface) at contractors workshop/factory before fabrication conforming to Fe-410-W(Gde-E-250) quality-B complete all as specied and directed |
| 26 | S & FMild steelplainblack sheet 1.25 mm thick in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required all as specied and directed |
| 27 | M&L for Preparation of new wood or wood basedsurface of any description, not other wise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer etc complete all as specified and as directed |
| 28 | M&L for Preparation of newsteel or iron surface of any description, not other wise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer etc complete all as specified and as directed |
| 29 | S & F Butt hinges stainless steel, 100mm size and fixedto door frame and shutterduly welded/screwed complete all as specified and as directed |
| 30 | S & F Butt hinges medium weight, cold rolled mild steel 100mm size and fixedto door frame and shutterduly welded/screwed complete all as specified and as directed |
| 31 | S&F Aluminium anodised towerbolt 150mm long of extruded section etc complete all as specified and as directed |
| 32 | S&F Aluminium anodised towerbolt 200 mm long of extruded section etc complete all as specified and as directed |
| 33 | S&F125 mm long aluminium handle, cast type, anodised etc complete all as specified and as directed |
| 34 | S&F150 mm long aluminium handle, cast type, anodised etc complete all as specified and as directed |
| 35 | S&F aluminium alloy, anodised sliding door bolt 300 mm long with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy etc complete all as specified and as directed |
| 36 | S & Ffloor door stopper of aluminium alloy powder coated, with hard down steel spring, overall 140mmlength of cover plate all as specified and as directed. |
| 37 | S&F Mild steelordinary rat tail rod pattern springs, 300mm long including roller and roller plate complete all as specified and as directed. |
| 38 | S&F Rubber door buffer 125mm size fixed with brass screws complete all as specified and directed |
| 39 | S&FEye doorviewer(Magic eye) made of stainless steel complete all as specified and directed |
| 40 | M & Lfor figured glass4 mm thick, pin head type and glazing with oil putty/wooden or steel beading in squares not exc 0.5 Sqm in each paneincluding hacking out old broken glass of any thickness, size, quality or description from metal frame including punching or drilling out old glazing pins/spring clips etc complete all as specified and as directed. |
| 41 | M&L for Sheet glass 3mm thick, ordinary quality and glazing withoil putty / wooden or steel beading in squares not exc 0.5 sqm in each paneincluding hacking out old broken glass of any thickness, size, quality or description from metal frame including punching or drilling out old glazing pins/spring clips etc complete all as specified and as directed. |
| 42 | M & L for Running welding,thickness of metal to be welded not exc 6 mm thick including hacking out old welding complete all as specified and as directed. |
| 43 | S & F in repairs stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm fixed with MS screw or nut bolts with or without wooden or steel beading in repairs all as specified and as directed. |
| 44 | S & F in repairs Aluminium anodised barrel towel bolts of extruded section , 150 mmlong all as specified and as directed. |
| 45 | S & F in repairs Aluminium anodised barrel towel bolts of extruded section, 200 mm long all as specified and as directed. |
| 46 | S & F in repairs Aluminium alloy anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections including taking down old sliding door bolt 300 mm longall as specified and as directed. |
| 47 | S & F in repairs extruded aluminium alloy handles, fabricated type anodised, 125 mmsize all as specified and as directed. |
| 48 | S & F in repairs extruded alloy handles fabricated type anodised, 150 mm size all as specified and as directed. |
| 49 | S&F in repairs Butt hinges medium weight cold rolled mild steel of 100mm sizeall as specified and as directed. |
| 50 | S & F in repairsFloor door stopper of aluminium alloy powder coated, with hard down steel spring, plate length 140 mm all as specified and as directed. |
| 51 | S&F in repair mild steelordinary rat tail rod pattern springs 300mm long, including roller and roller plate complete all as specified and as directed. |
| 52 | S&F in repair Rubber door buffer 125mm size fixed with brass screws complete all as specified and directed |
| 53 | S&F in repair Eye doors viewer (Magic eye) made of stainless steel complete all as specified and directed |
| 54 | S & F in repairs Prelaminated particle board18/19mm thick, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work, alround6mm th teakwood beadingfixed in kitchen cabinet or cupboardsall as specified & directed. |
| 55 | M&L forsecond class hard wood plain fillets square, rectangular or triangular in section clean sawn, exc 6 & not exc 13 sqcm cross section area, secured with nails or brads of fixed to cupboard shutter including taking down old filletsall as specified and directed. |
| 56 | S&F Continuous (piano) hinges, 30mm width of flaps (when open),mild steel, bright finish or electro galvanised all as specified and directed. |
| 57 | S&Fin repairsHasp and staple100 mm size,safety type, aluminium anodized with mild steel hinge pin including bolt to hinge plate and fixed with screwsall as specified and directed. |
| 58 | S&F Magnet door catcher made of stainless steel complete all as specified and directed |
| 59 | S & Fcupboard knobs brass polished 40 mm dia, fixed with nut, screw and washer ofcomplete all as specified and as directed. |
| 60 | S & F in repairs Hasp and staple safety type of size 100 mm, aluminium anodized complete all as specified and as directed. |
| 61 | S & F in repairscupboard knobs 40 mm dia, brass polished fixed with nut, screw and washer complete all as specified and as directed. |
| 62 | S&F in repairs Magntet door catcher made of stainless steel complete all as specified and directed |
| 63 | S&F False ceiling with aluminium anodisedsnap grid frame work of grid size 605mm x 605mm including Non asbestos fibre cement building boardsfixed or laid/ insertedon Aluminium framework with screws including taking down old celing of any description complete all as specified and directed. |
| 64 | S&F in repairs stainless steel decorative curtain rod of 20 mm bore with wood finishes (weight not less 200 gms per running meter) includingfancy finale caps cap etc complete all as specified and as directed |
| 65 | S&F in repairs Bracket for curtain rod of dia 20 mm dia made out of SS Flat not less than 20 mm wide 1.50 mm thick and overall length not less than 160 mm fixed with screws min 2 Nos with Rawl Plug of size not less than 50 mm long includingwooden base etc complete etc complete all as specified and as directed |
| 66 | S&FPre- painted galvalume aluminum zinc coating, 150AZ,GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws including dismantling of sheet of any type and any thickness complete all as specified and directed. |
| 67 | S&F Pre-painted galvalume aluminum zinc coating, 150AZ,GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws including dismantling of sheet of any type and any thickness complete all as specified and directed. |
| 68 | M & L forGranite 20 mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite ,including cutting and polishing laid on 15 mm thick screed bed in CM (1:4)set and jointed including dismantling of old stone slabs laid bedded and pointed in any mortar complete all as specifiedand directed. |
| 69 | M & L forEdge moulding to 18-20mm thick granite stone any description of counters vanitiesetc. including machine polishing to edge to give high gloss finish etc. complete all as specified and directed. |
| 70 | S & F in repairskitchen sink with drainage board made of stainless steel 1mm thick kitchen or laborotry with plugs, washers and wastes including bedding in mortar on to dwarf wall or including fixing cantilever brackets and connecting union pipes overall size 915x460mm bowl size 410x330x160mm complete all as specified and directed. |
| 71 | S&F in repairs sinks made of stainless steel 1mmthickkitchenorlaboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete. |
| 72 | S&F in repairs stainless steel plate rack of 0.63mm thick sheet, overall size 800mm x 600mm complete all as specified and as directed |
| 73 | Opening of air lock / blockage in GI / CPVC pipe line of any dia from outlet of water tank to all internal GI/CPVC pipes/fittings to smooth flow of water from bib taps/showers/WHB pillar tap/stop valves/ mixers complete by air prssure /water gravity pressure all as specified and directed. |
| 74 | S&F in repairs brass spindle of any type with nylon washer of any bib tap / stop valve/angle/Pillar cock/wall/sink mixer suitable fixed to15mm bore pipe complete all as specified. |
| 75 | S&F in repairsVitreous China wash basin, white, flat back, size550x400mm & brackets including cutting for and pinning in ends of brackets or erecting standwith following accessories all as specified and directed :-(i) Brass waste coupling32 mm dia.(ii) Chromium plated fancy type pillar taps of size 15mm dia (iii) PVC Waste pipe.(iv) PVC connection 15mm dia x 600 mm long PTMT nuts |
| 76 | S&F in repairs Vitreous china wash down water closet pan (pedestral Pattern) white, including connection to drain & or out going pipe, and to flushing pipe, anti syphonage pipe with following accessories all as specified and directed :-(i) Plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device(ii) PVC valveless, syphonic action type, flushing cistern 10 ltr capacity, dual type, low level, white, with inlet, ball valve, float and handle including brackets(iii)PVC connection 15mm dia x 450 mm long PTMT nuts |
| 77 | S&F in repairs Vitreous china european type pedestal pattern water closet of size 730x370x700mm, floor mounted onepiece toiletnoise free gentle closure, white, oval shape or Reach shape complete all as specified and as directed.(Make Kohler Model No OveK-17629IN-SM-0 or equivalent in Jaquar or Hindware) |
| 78 | S&F in repairsVitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests including PVC (SWR) P trapincluding making good to floor, with following accessories complete all as specified and as directed :-(i)PVC valveless, syphonic action type, flushing cistern 10 ltr capacity, dual type, low level, white, with inlet, ball valve, float and handle including brackets(ii) PVC connection 15mm dia x 450 mm long PTMT nuts |
| 79 | S&F in repairsPVC valveless syphonic action flushing cistern 10 ltrs capacity, low level with inlet ball valve, flush pipe of polythelene of low or high density or PVC 32mm dia comlplete all as specified and directed. |
| 80 | S&F in repairs syphon kit including ball valve, handle etc for low level flushing cistern complete all as specified and directed. |
| 81 | Supply & layingCPVC pipes 20 mm outer dia SDR 11 ( Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors including all fittings and specials including taking down 15 mm GI tubing and connections complete all as specified & directed |
| 82 | Supply & laying CPVC pipes25 mm outer dia, SDR 11 ( Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors including all fittings and specials including taking down 20 mm GI tubing and connections complete all as specified & directed. |
| 83 | S&F in repairsWall mixer for mixing hot and cold water, brass chromium plated, screwed down for iron pipe 15mm dia and fixed complete all as specified and directed. |
| 84 | S&Fin repairsBasinmixer for mixing hot & cold water, brass chromium plated,screwed down for iron pipe 15 mm dia and fixed complete all as specified and directed. |
| 85 | S&F in repairsPillar taps, fancy type, cast copper alloy with capstan heads, chromium plated screwed down high pressure, with or without lettered `Hot\" or `Cold\" with long screwd shanks and fly-nuts, screwed for iron pipe15mm diaand fixed complete all as specified and directed. |
| 86 | S&F in repairsStop valves/ angle valves, cast copper alloy, screwed down, high pressure, fancy type,chromium plated screwed both ends for iron pipe 15mm dia or for unions and fixedcomplete all as specified and directed. |
| 87 | S&F in repairsTwo way bib cock with angle valve combination brass chromium plated, screwed for iron pipe 15mm dia or for unions and fixedcomplete all as specified and directed. fixed |
| 88 | S&Fin repairsStop valvescast copper alloy, screwed down, high pressure, fancy type,chromium platedwith long shankandcup (concealed type) screwed both ends for iron pipe 15mm dia or for unions and fixedcomplete all as specified and directed. |
| 89 | S & F in repairsBib tap long bodybrass chromium plated with CP flange screwed for iron pipe15mm dia or for unions and fixedcomplete all as specified and directed. |
| 90 | S&F in repairsBib tapfancy type, Brass chromium plated any colour high pressure screwed for iron pipe 15mm diaand fixedcomplete all as specified and directed. |
| 91 | S & F Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position including taking down old complete in all respect as specified. |
| 92 | S & F in repairs Towel rail stainless steel glossy finish complete all as specified and as directed. |
| 93 | S&Fin repairsshower rose with swivel joints, 125mm dia brass chromium plated complete all as specified and as directed. |
| 94 | S&F in repairs Soap dish chromium plated brassfixed in wall as per manufacturers instruction complete all as specified and as directed. |
| 95 | S&F in repairs Toilet paper holder with flat recessed type,stainless steel made complete all as specified and directed.\" |
| 96 | S & F in repairsbevelled edge mirror of size 600mmx450mmof selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified & directed. |
| 97 | S&F in repairs PVC Mirror cabinet of size 400x500 mmwith multiple compartment suitable for bath room complete all as specified and as directed. |
| 98 | S & F in repairs PVC connection 15 mm dia 450mm longwith PTMT nutsall as specified and as directed. |
| 99 | S & F in repairs Stainless steel connection (Suitable for HOT Water Supply) 15 mm dia 450mm longall as specified and as directed. |
| 100 | S & F in repairsWaste fittings 32 mm dia, brass chromium plated for sinks, basins, etc with long screwed shanks and flynuts, flange end fixedcomplete all as specified and as directed |
| 101 | S & F in repairs Waste fittings 40mm dia, brass, chromium plated for sinks etc with long screwed shanks and flynuts, flange end fixed complete all as specified and as directed |
| 102 | S & F in repairsPVC waste pipe 32mm dia, 800mm long corrugatedcomplete all as specified and as directed. |
| 103 | S&F in repairs PVC urinal waste pipe 32mm dia 800mm long, complete all as specified and directed |
| 104 | S&F in repairsBib tap PTMT fancy type any colour screwedfor iron pipe 15mm diaand fixed complete all as specified and directed |
| 105 | S&F in repairsPillar tap PTMT fancy type any colour screwedfor iron pipe 15mm dia and fixed complete all as specified and directed |
| 106 | S&F in repairsAngle / stop valve ofPTMT any colour pressed screwedfor iron pipe 15mm dia and fixed complete all as specified and directed |
| 107 | S & F in repairs cover suitable for PVC sintex tank of 500/1000 litre capacity all as specified and directed |
| 108 | S&F in repairsplastic water closet seat cover for western & indo western pedestal pan closed pattern with flat bottom, and cover and mild steel chromimium plated or aluminised hinging device fixed complete all as specified and directed. |
| 109 | Petty repairs to leaking water in bib taps, pillar taps, stop cock , angle valve, PVC connection waste pipes, float valves, concealed stop cock. GI pipe joints bottle traps etc of any description by changing the washers etc or any other minor accessories to make the system functional complete all as specified and directed |
| 110 | Petty repairs to high/low level flushing cistern by adjusting the float valve, leakage of PVC connection, PVC/GI bend replacing of rubber washer check nuts plugs etc for any type of flushing cistern complete all as specified and directed |
| 111 | M & L forrotational moulded, triple layer polythene water storage tanks 500 litres capacity (cylindrical vertical with closed top) hoisting and fixed in positionon roofs includingball valve 20 mm dia and fittings includingdismantling existing water storage tank, complete all as specified & directed. |
| 112 | M & L forrotational moulded, triple layer polythene water storage tanks 1000 litres capacity (cylindrical vertical with closed top) hoisting and fixed in positionon roofs includingball valve 25 mm dia and fittings includingdismantling existing water storage tank, complete all as specified & directed. |
| 113 | S & F in repairs ball float valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe25 mm dia of bore complete all as specified and as directed [Minimum weight for 25 mm – 455 gms] . |
| 114 | S & F in repairsball float valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe 20 mm dia of borecomplete all as specified and as directed [Minimum weight for 20 mm – 210 gms] . |
| 115 | Dismantling of floor, hearth or wall tiling including cement mortar bedding (but not backing) and removing rubbish off from premises all as specified and as directed. |
| 116 | Demolition of cement concreteand paving not exc 15 cm thick (below or above ground level) complete all as specified and as directed. |
| 117 | M&L for Non Skid ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including Screed bed or bedding layer 15 mm thickCM(1:4) all as specified and as directed. |
| 118 | M&L for Non Skid ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and includingScreed bed or bedding layer 15 mm thickCM (1:4)all as specified and as directed. |
| 119 | M & L for Glazed ceramic tiles in vertical surfaces 350 x 250x 7 mm/ 450 x 350 x 7 mm/ 300x450x7 mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match the surfaceover & including backing coat 10mm thick CM(1:4) all as specified and as directed. |
| 120 | M & L for Plain cement concrete(1:2:4) type B-0using 12.5 mm graded stone aggregate as in25mm thicklevelling concrete finished even for floor all as specified and as directed. |
| 121 | M & L forGlazed tiles/non-skid tiles in patches, area n exc 0.5 sq.m. including removing and cleaning old tiles, preparing beds and laying or setting, jointing and pointing new or old tiles completeall as specified and as directed. |
| 122 | Material and labour for water proofing treatment to sunken portions of WCs, bathroom and kitchen etc by applying water based, cold applied, single component, elastomericin-situ seamless monolithic coating ready to use acrylic modified bituminous liquid membrance with the following procedure in sequence all as specified and as directed.SURFACE PREPARATION (i) Removing all loose gravel, dirt, oil, grease and foreign matter by jet of dry air andcleaning the surface mechanically or by grinding to make it smooth before application. (ii) Repairing all cracks by cutting “V” groove and fill with PMC mortar prepared in theratio of Shalicrete : cement : sand (1:2:5) or equivalent. (iii) Providing 50 mm x 50 mm coving made out of PMCmortar as above.MATERIAL PREPARATION (i) Stir TarFelt® LM or equivalent by a slow speed mixture (approx. 400 rpm) fitted witha suitable mixing paddle to ensure a homogenous mix. (ii) After stirring, wait for the product to settle in order to let entrapped air escape. |
| 123 | WATERPROOFING APPLICATION(i) Slightly damp the surface. Avoid standing water / ponding.(ii) Prime the surface with a mixture of TarFelt® LM or equivalent and potable water inthe ratio of 50:50 and apply @400 grm / sqm of the mixture and allow it to touch dry.(iii) Apply first coat of TarFwlt® LM @ 0.70 kg / sqm by brush / roller / airless spray whilethe primed surface is tracky, For faster and smoother application, airless spray is preferred.(iv) Spread fiber glass net of 45 gsm with overlap of 50 mm in both directions when thesurface is till tackty.(v) Allow 1st coat to dry for 10-12 hrs.(vi) Apply second coat of TarFelt® LM @ 0.70 kg /sqm by brush / roller / airless spray forfinal DFT of 1000 micron in two coats inclusive of fibre glass of 45 gsm (theoreticalcoverage depending on surface conditions).(vii) Sprinkle sand @ 200 grm / m2 over the final vertical coating when the surface is stilltackty to facilitate plastering.(viii) Ensure final curing time of 36 hrs before allowing / carrying out any further work.(ix) Conduct ponding test after 7 days of curing at ambient temperature. |
| 124 | M&L for Plain cement concrete(1:5:10)type E2using 40mm graded stone aggregate insunken floor including Demolition of cement concrete exc 15 cm thickness but above ground floors including removal of debris to a distance exc 500m but not exc 1000m complete all as specified and as directed. |
| 125 | Demolition of brick/stone/boulder /precast concrete articles and precast concrete block built in cement mortar etc complete all as specified. |
| 126 | M&L for Pre-cast cement concrete (1:3:6) type C1 using 20mm graded stone aggregate as in solidblock masonry exc 10cm in widthand setting in CM (1:6) complete all as specified and as directed. |
| 127 | Taking down cement plaster of any description including raking out joints, hacking for key and disposal of debris to a distanceexc 500m but not exc 1000m all as specified and as directed. |
| 128 | M&L for rendering 15 mm thick cement mortar (1:6) on fair faces of brick work or concrete surfaces finishedeven and smooth without using extra cement all as specified and as directed. |
| 129 | M&L for rendering 15 mm thick cement mortar (1:4) on other than fair faces of brick work or concrete surfaces mixedwith WPCfinishedsurface even and smooth without using extra cement all as specified and as directed.Note :- WPC will be measured and paid separately |
| 130 | Supply only liquid water proofing compound, ISI marked all as specified and as directed. |
| 131 | M&L for rendering 5 mm thick cement mortar (1:3) over RCCceilingsurfaces finishedsurface even and smooth without using extra cementall as specified and as directed. |
| 132 | M&L forPreparation of newly plastered wall surfaces and applying two coat of Acrylic emulsion distemper over a coat of alkali resistent primer on2mm thckwall care putty intwo coats finished to smooth surface complete all as specified and directed |
| 133 | M & L for preparation of newly plastered wall surfacesand applying two coats of cement base paint over a coat of self primer complete all as specified and as directed. |
| 134 | M & L for preparation of newly plasteredceiling surfaces and applying three coat of white wash complete all as specified & as directed. |
| 135 | S & F in repairsPVC(SWR) floor trap,plain with grating including jointing with solvent cement, 75mm dia outlet all as specified and as directed. |
| 136 | S & F in repairsgrating doom 100 mm dia of PTMT complete all as specified and as directed |
| 137 | S & F in repairs PVC (SWR) pipes 75 mm dia bore single socketed in any length with rubber ring joints fixed to walls including necessary fittings all as specified and as directed. |
| 138 | All as per item No 137 herein beforebut 110 mm dia . |
| 139 | S&F in repairsPVC (SWR) Bends 75mm dia bore with access door of any radius all as specified and as directed. |
| 140 | All as per item No 139 above but 110mm dia |
| 141 | S&F in repairsPVC (SWR) junction single(single T) equal or unequal 75mm dia bore with access door all as specified and as directed. |
| 142 | All as per item No 141 above but 110mm dia |
| 143 | S&F in repairsPVC(SWR) brach piece, single(single Y) equal or un equal 110mm dia borewith access door all as specified and as directed. |
| 144 | All as per item No 143 above but 75mm dia |
| 145 | S&F in repairsPVC(SWR) brach piece,(double Y) equal or un equal 110mm diawith access door all as specified and as directed. |
| 146 | All as per item No 145 herein beforebut 75mm dia |
| 147 | S&F in repairsPVC(SWR) vent cowl 75mm diabore all as specified and as directed. |
| 148 | All as per item No 147 herein beforebut 110mm dia |
| 149 | S&F in repairs Vitreous China bowl type urinal flat back, size of 465 x 355 x 265 mm white (minimum), with grating and union for discharge pipe including concussive push button taps of cast copper alloy,PTMT waste coupling, PTMT urinal spreader (Minimum weight 32mm-45gms urinal spreader) PVC connection 15mm dia450 mm long with PTMT nutsPVC urinal waste pipe complete all as specified and as directed. |
| 150 | M & L for Preparation of old decorated wall surfaces and applying one coat of white wash etc complete all specified and as directed. |
| 151 | M & L for Preparation of old decorated surfaces and applying two coats of white wash on walls including in narrow widths/ bands etc complete all specified and as directed. |
| 152 | M & L for Preparation of old decorated surfaces and applying one coat ofwhite wash on ceilings including in narrow widths/ bands etc complete all specified and as directed. |
| 153 | M & L for Preparation of old painted steel and iron surfaces over 10cm width or girthand applying one coat of synthetic enamel paint all as specified and as directed. |
| 154 | M & L for Preparation of old painted wood and wood based surfaces over 10cm width or girthand applying one coat of synthetic enamel paintall as specified and as directed. |
| 155 | M & L for Preparation of old decorated wall surfaces including washing, rubbing down and stopping and applying one coat of Acrylic emulsion distemper all as specified and directed. |
| 156 | M & L for Preparation of old decorated wall surfaces including washing, rubbing down and stopping and applying twocoats of Acrylic emulsion distemper all as specified and directed. |
| 157 | M & L for Complete removal of existing treatment on walls including in narrow widths/ bands of any description and applying two coats of Acrylic emulsion distemper over one coat of alkali resistant primer onone coat of 1mm thick wall care putty finished to smooth surfacesetc complete all as specified and as directed. |
| 158 | M & L for Preparation of old decorated ceiling surfaces including washing, rubbing down and stopping and applying one coat of Acrylic emulsion distemper all as specified and directed. |
| 159 | M & L for Preparation of old decorated wall surfaces including brooming down with steel wire brushingscrapping downsoot’s, moulds, moss and efflorescence, salts ,treating oil and greasy spots etc and applying one coat of cement base paint complete all as specified and as directed. |
| 160 | M & L forPreparation of old decorated surfaces including brooming down with steel wire brushingscrapping downsoot’s, moulds, moss and efflorescence, salts, treating oil and greasy spots etc and applying two coats of cement base paint all as specified and as directed. |
| 161 | Material and labour for cleaning of PVC/RCC over head water tank capacity of water tank exc 250 & not exc 500 litre, at any height (on accessible/in-accessibleroofs) by removing all scale, dirt, mud, any foreign material, accumulated silt, other dirty substance, algae, fungus and any other bacterial material from sides/bottom of tank, cleaning shall be done by draining / pumping out water / sludge from bottom, by high pressure water jet of pressure not less than 120 PSIfor removing clogged mud/scales etc and cleaning the same again with self priming pumped fresh water and disinfecting the water tank by using UV radiator and approved chemical (chlorite), after cleaning writing letter / figures (Date of cleaning and next Date of cleaning) on black back ground with white synthetic enamel paint including removing the existing letters/ figures complete all as specified and as directed. |
| 162 | All as per Item No 161 herein before but exc 500 litre & not exc 1000 ltr capacity |
