Tender For Special Repair To Bldg No Ts-02 (01 To 04) Or Md Accn At Mandir Line Of Static Wksp Eme Under Ge (Awc) Mhow; 1 Demolition of un-reinforced Cement Concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed. 2 Demolition of cement concrete (reinforced) as in roof, floors (other than ground floor) beams, staircase, landing, chajjas and similar suspended work complete. 3 Dismantling floor, hearth or wall tiling incl cement mortar bedding (but not backing) and rubbish of the premises complete all as specified and directed. 4 M&L for Scratch free, double charged, vitrified ceramic tiles9 to 10mm thick (square or rectangular) area of each tile not exceeding 0.36 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed or bedding layerin CM 1:6 complete all as specified and as directed. 5 M&L for Coloured Non Skid ceramic joint freetiles 7 to 8 mm thick (Square/ Rectangular) area of each tile exceeding 0.06 Sq. M but not exceeding 0.18 Sq. M, in floors etc,including 15 thick screed bedset and jointed in neat cement slurry and pointedin white or coloured cement to match the shade of the tile complete all as specified and as directed. 6 S&F Glazed ceramic tiles in vertical surface 450 x 350x 7 mm thick ,including 10 mm thick secreed bed set and jointed in neat cement slurry and pointed in white or cloured cement complete all as specified and as directed.Note : Rate includes for cuttingfor offsetsetc) complete all as specified and as directed. 7 M&L for Hard core of guage n.exc 63 mm, deposited, spread and levelled in layers n.exc 15 cm thick, watered and rammed to a true surface complete all as specified and directed. 8 M & L for 75 mm thick PCC 1:3:6 type C2 (Using 40mm graded granite stone aggregate) as in plinth protection finishd even and smooth with out using extra cement complete all asspecified and directed. 9 M&L for 50 mm thick cement concrete type B-1, 1:2:4 (using 20mm graded aggregate) surface finished even and smooth without using extra cement complete all as specified and directed. 10 Material and Labour Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-40 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand;complete all as specified and directed. 11 M&L for Pre Cast Cement Concrete 1:2:4 type B1 (using 20 mm graded aggregate) as in Kitchen platform and Cover slab for manholes etc set in cement mortor 1:4 including use and waste necessary form work (Reinforced shall be measured and paid seprately) all as specefied 12 M&L for cement concrete Type C21:2:440 mm graded stone aggegate as in footingscolumns ,beams walls CM1:4 including use and waste necessary form work (Reinforced shall be measured and paid seprately) all as complete all as specified and directed. 13 M & L for Form work to sides of foundation / slabs / base of columns plinth beams and similar work with fair finished surface complete all as directed. 14 M&L for mild steel TMT bars 10mm dia and over, cut to length bent to shap required including cranking, bending spirally for hooping for columnshooking ends and binding with and including mild steel wire (annealed not less than 0.9 mm dia or securing with clips complete all as specified and directed. 15 Description all as per ser item No. 14.00 above but 5mm dia and over upto and incl 10 mm dia in spacers, stirrups and binders complete all as specified and directed. 16 M&L for granite slabs 20mm thick machine cut bedded laid over cement screed 15mm thick in CM 1:4 laid and jointed with grey cement slurry mixed with pigment to match the shade of slab incl grinding moulding rounding chamfering and polishing complete all as specified and directed. 17 M&L for machine cut Cudappastone slab flooring 20-25mm thick laid over and including 20mm thick screed bed in CM 1:6and jointed with grey cement slurry mixed with pigments to match the shade of the slab including rubbing and polishing with beeswax polish complete all as specified and as directed. 18 M&L for Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and directed. 19 Demolition of brick work or stone/ boulder masonry, built in cement mortar including all quoins, pillars etc complete all as specified and directed. 20 M & L for brick work with sub-class `B bricks, straight or curved burnt clay brickson plan exceeding 6 M mean radius built in cement mortar 1:6 complete all as specified and directed. 21 M&L for brickwork with sub class ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1: 4 complete all as specified and directed. 22 Taking down cement plaster on wall of any description incl racking out joints for key, scrubbing with water etc. complete all as specified and directed. 23 M & L for rendering 15mm thick in cement mortor 1:4 on concrete or brick wall surfaces, finished even and smooth without using extra cement, mixed with WPC @ at 3% by weight of cement (IWPC measured and paid separately) complete all as specified and directed. 24 Supply only integral water proofing compound. 25 M & L for rendering 10mm thick in cement mortor 1:6 on Brick wall surfaces, finished even and smooth without using extra cement complete all as specified and directed. 26 M&L for 15 mm thick cement plaster in cement mortar 1:6 on brick or concrete surface etc. on wall finished even and smooth without using extra cement, all as specified . 27 Excavation in trenches not exc 1.5 m wide and not exc 1.5 m in depth for foundation etc or for shafts wells, cesspits, manholes, pier holes etc not exc 10sqm on plan and getting out in hard/dense soil complete all as specified and directed. 28 Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick with all kind of soil complete all as specified and directed. 29 M&L for removing excavated surplus soil n.exc 50m and depositing where directed at a level n.exc 1.5m above the starting point complete all as specified and directed. 30 M&L for PCC type D2 1:4:8 (using 40mm graded stone aggregate) as in foundations, filling and mass Concrete complete all as specified and directed. 31 Taking down chowkats with shutters (without taking off shutters from the frameexc 1.5 Sqm and n.exc 4 Sqm each complete all as specified and directed. 32 Description all as per ser item No. 31.00 above in before but n exc 1.5 Sqm complete all as specified and directed. 33 S&F Pressed steel frames 125x60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete as specified and directed. 34 S&F pressed steel door frames of size 105 x 60mm, made of 1.25mm thick sheet, for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate,etc complete all as specified as directed. 35 S&F IInd class hardwood panelled shutters of 40mm thick (any number of panesl) with panels of timber flat on both sides (feathered edged0 or of veneeered particle boad medium density, wood particle board with commercial face veneers, complete all as specified and as directed. 36 Providing“RAJSHRI” Brand Factory Made 35 mm thick 100% Solid WPC ( Wood polymer Composite ) Laminated Flush Door Shutter of required size comprising ofvirgin PVC resin of K Value 57-60 ( Suspension Grade ), Calcium Carbonate and natural fibers ( Wood Powders/ rice husk/ wheat husk ) and Non toxic additives, made from Extrusion process WPC foam sheet Single Extruded ( Inner ) with having minimum density not less than 650 kg/cbmmanufactured by RAJSHRI an ISO 9001 - 2015 Certified Company, having good screw holding capacity ( Screw Withdrawal strength of 50 N ( Face ) & 1100 N ( Edge ), Minimum Compissive of 50 N/mm2, Modulus of elasticity 850N/mm2 and resistance of spread of flame of Class A category with Property of being Termite/ Borer Free.Water/ Moisture Proof and Fire Retardant. WPC to be Laminated with PVC foil of minimum 14 microns thick of approved design pasted on both faces of shutterand fixing stainless Steel butt hinges of required size with necessary full body threaded star headed counter sunk SS Screws,incl chowkhtas All as per direction of Engineer -In-Charge, Material test certificate and authentication should be compulsory provided by the manufacturing company :For WC/Bathroom/Toilet/Kitchen/Balcony Doors. 37 Providing30 mm thick RAJSHRI BRAND FACTORY MADE WIRE MESHSOLID WPCDOOR SHUTTER consisting ofDensity 500 Kg /CbmManufactured by an ISO-9001-2015 certified Company , Door to be panelled with SS mosquito Mesh and XTN aluminium Mesh for additional strength and safety purpose.(confirming as per IS:4020). The door should be water proof, termite proof, fire retardant and having screw holding capacity. Door to be fixed to frame with 3 nos. M.S powder coated butt hingessize 100mm*25mm*2mm and 32mm long steel screws drilled suitable to pass through both the walls of the M.S tube.Other hardwares should be fixed with 19*6mm size steel screws etc. Complete as per direction of Engineer-in -charge, manufacturers specification & drawings. 38 Material and labour Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, supplying & fixing in opening as per specificationall as directed. 39 Material and labour Factory made solid panel pvc door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside complete all as specifed and as directed. 40 Material and labour Stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperature 1.40 mm and fixed withn wooden beading or with nuts and bolts to existing steel windows/wooden windows complete all as specifed and as directed. 41 S & F powder coated aluminium ventilator cross section conforming to IS 63.5x38.10x1.5mm consisting of two partions upper portion shall have louvers with 3mm thick pin headed glass and aluminium wire cloth 0.30mm nominal dia of wire and average width of aperture 1.56m fixed with aluminium beads and securing on outer face of frame and lower portion of ventilation shall be fixed with 3mm thick pin headed glass with IDPE rubber gasket including aluminium beads, including preparation of jombs all around in CM 1:3 finishing even and smooth complete all as specified and directed. 42 S & F Powder coated aluminium sliding glazedwindows with three track shutter sliding (two shutters glazed and one shutterwire mesh) shall be following specification complete all as specified and as directed by Engr-in-charge.(i)Windows frame of cross section 101mm x 44mm x 1.5mm thick.(ii)Three way track for sliding shutters of cross section91.8mm x 31.75mm x1.1mm thick.(iii)Sliding shutter frame of cross section40 x 18 x 1mm thick.(iv)4 mm thick tintedglass superior quality.(v) IDPE Rubber guasket for fixing of glass.(vi)Locking cleats per shutter -01 Nos.(vii)Sliding rollers per shutter - 02 Nos.including satety steel grill(viii) Aluminium wire cloth 0.30mm nominal dia of wire and average width of aperture 1.56mm for shutters 01 Nos. 43 M&L for 5.5mm thick sheetglassn exc 0.50sqm in area to be fixed in Alluminiumwindows complete all as specifed and as directed. 44 S&F 300mm length, aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specifed and as directed. 45 S&F 250 mm length, aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specifed and as directed. 46 S&F100 mm size of Butt hinges, medium weight cold rolled mild steel complete door etc complete all as specified and directed. 47 S&F aluminium anodised barrel tower bolts of extruded section with 100 mm long bolt, all as specified . 48 S&F aluminium anodised barrel tower bolts of extruded section with 200 mm long bolt, all as specified . 49 S&F aluminium anodised barrel tower bolts of extruded section with 150 mm long bolt, all as specified . 50 S&F Extruded aluminium alloy handles fabricated type anodised 150mm size complete all as directed and specifiedand as directed. 51 S&F Extruded aluminium alloy handles fabricated type anodised 100mm size complete all as specified and as directed. 52 M&L for floor door stopper of brass body and tongue, anodised, with hard drawn steel spring, 140mm long, fixed in floor complete all as specified & as directed. 53 S&F hasp and staple 125mm, safety type, aluminium anodised with alu hinge pin incl bolt to hinge plate and fixed with screws all as specified and as directed. 54 M&L for 2nd Class hardwood plain fillets, square or triangular in section, clean swan, secured with nails or brads, croos sectional area exc 13 Sqcm but Not Exc 25 Sqcm complete all as specified and directed. 55 Material and labour Second class hard wood Plain fillets square, rectangular or triangular in section clean swan, Exc 6 & n exc 13 sq. cm secured with mails brads,Wooden Barear 25X40mmcomplete all as specifed and as directed. 56 Material and labour 19mm thick Particles boards, medium density, flat pressed, single layer type or three layer, BWR grade complete all as specified and directed. 57 S&F in repairs 18/19mm thick prelaminatedparticle board interior grade / sprelaminated one side with decorative choice lamination and other side balancing white lamination fixed with nails to timber frame work complete all as specified and directed. 58 Extra over rates of block board or veneered particle board of (18/19mm ) for external teak wood lipping 6mm thick fixed with nails complete all as specified and directed. 59 S & F Continuous (piano) hinges,mild steel, bright finish or electro galvanised, Width of flaps (when open) in 30 mm etc complete all as specified and directed. 60 S & F 75mm thick Extruded aluminium alloy handles, fabricated type,anodised, etc complete all as specified and directed. 61 S & F brass 2-levers locks for cupboard, grade I of size 50mm complete all as specified and directed. 62 S & F 40mm dia, cupboard knobs fixed with nut, screw and washer of mild steel, bright finished and brass polished complete all as specified and directed. 63 S&F fanlight magnetic catch with 14mm catch cast brass and fixed to cupboard shutters all as specified and as directed 64 S& F 18 mm thick factory made PVC sheet one side pre laminated sheet kitchen cabinet shutter/cupboard shutter.The 18mm thick sheet shutter bent at 90 degree and finish all edges at level for making edge lipping bending for 0.5 mm thick PVC sheet lipping at all four edges using bodning etc complete all as specified and directed. 65 S&Ffactory made PVC shelf/partition of required size consisting of panel of 12 mm thick celuka PVC ply and for supporting the hold of shelf/partition and shall provide 3 edges in size 18mm x 18mm as per required length the front side of the edge visible in the fronth of the self / partition to be edge lipped by 18mm width x 1 mm thick PVC sheet of density 600kg/cum manufactured by ISO 9001-2015 Certified company using solvent cement etc complete all as specified and as directed. 66 S&F stainless steel shelf closing hinges 75 mm size for PVC door shutters complete all as specified and directed 67 S&F 50 x 15 mm size magnet door catcher for closing for PVC door shutter complete all as specifid and directed . 68 S& F 100 mm size MS mat/glossy finish handle complete all as specfied and directed . 69 S&F modular type stainless steel cutlery basket size 20 x 19 x 4 inches (dia of wire not less than 3.00 mm) of any shape withside sliding roller clip and silding rails on both side fixed with steel screws incl all fixing arrangements complete all as specified and directed. 70 Description all as per ser item No. 69.00 above but cup and saucer basket size 20 x 17 x 4 inches complete all as specified and directed. 71 Description all as per ser item No. 69.00 above but plain basket size 20 x 19 x 6 inches complete all as specified and directed. 72 Description all as per ser item No. 69.00above but grain basket size 20 x 17 x 6 inches complete all as specified and directed. 73 Description all as per ser item No. 69.00 above but thali basket size 20 x 19 x 8 inches complete all as specified and directed. 74 Description all as per ser item No. 69.00above but plain basket size 20 x 17 x 8 inches complete all as specified and directed. 75 M & L forform work to sides of concrete foundation including rafts, footings, foundation beams, bases of columns etc for fair finished surface complete all as specified. 76 S&F Harrison rails ,mildstainless steel curtain rod cromium platedwith brackets 25mm dia including necesary SS clamp complete all as specified & asdirected. 77 Taking down 15mm bore steel tubing and connections in any position, Complete all as specified and directed. 78 Taking down 20mm bore steel tubing and connections in any position, Complete all as specified and directed. 79 Cutting chases, pinning in, making good to facings where required & pointing in cement mortar 1:3 for concealed water tubing, etc.& making good, cutting not exc 10 cm grith 80 Supplying and fixing of 16mm CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors including provision of special fittings ( Unions, elbow, Tee, Male threaded brass adaptor, Female threaded brass adaptor, Tank adaptor etc), complete all as specified 81 Supplying and fixing of 20mm CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors including provision of special fittings ( Unions, elbow, Tee, Male threaded brass adaptor, Female threaded brass adaptor, Tank adaptor etc), complete all as specified 82 M&L for 20 mm bore GI Tubing medium grade with all fittings fixed to wall/ ceiling or in floor complete as specified and directed. 83 S&F in repair rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) of 2000 ltrs capacity hoisted and fixed in position all as specified including dismantling old500 ltr water tank complete all as specified and directed. 84 S&F 20 mm dia brass ball valve, high pressure with polythene float and fly-nut complete, screwed for iron pipe or brass ferrule fixed in repair complete all as specified and directed. 85 S&F in repair 20 mm dia Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed. 86 S & Fin repair 15mm bore Bib taps, chromium plated cast copper alloy but fancy type, screwed down, screwed for iron pipe or for brass ferrule complete allas specified and directed. 87 S&F in repairs 15 mm diafancy type stop valves/ angle cock chromium plated screwed down, high pressure,screwed both ends for iron pipe or for unions and fixed complete allas specified and directed. 88 S&F Long body CP Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and as directed. 89 S&F angular stop valves, cast copper alloy, screwed down, high pre-ssure, with crutch or but-terfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed. 90 S&F Bib taps, cast copper alloy with crutch or butterfly handle, sc-rewed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and as directed. 91 S&F Brass CP wall mixer for mixing hot & cold water screwed down for iron pipe and fixedcomplete all as specified and as directed. 92 S&F Brass CP Tubular towel rail, 20mm dia, D type, 60cm long between flanges fixedcomplete all as specified and as directed. 93 S&F chromium plated shower roses 125mm sizes with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified and as directed. 94 M&L for Health faucet (ABS Bpdy) mild steel chromium plated suitable for 15mm dia pipe 1.25 M long flexible tube and ABS wall Hook including making connection and fixed in position with two way tap complete all as specified and as directed. 95 S&Fin repairs stainless steel Kitchen sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mmincluding necessary PVC outlet pipe and coupling complete all as specified and directed. 96 S & F in repair stainless steel plate rack 31 X 36 X 10 made up of 1mm thick sheet (Non magnetic) complete all as specified and directed. 97 S&F in repairs Vitreous China squatting pan , Orissa pattern size 580 X 440 mm white with intgrel footrest (excluding flushing cistern 10 ltr capacity & flush pipe) with 110mm dia PVC SWR P or S trap, fixing of cistern, complete including provision of cement concrete all as specified and directed. 98 S&F in repairs for vitreous china wash basin, white, flat back size 550 x 400mm including 01 Nos cast copper alloy 15mm CP fancy type pillartap, 01 Nos 32mm waste coupling , one pair of MS bracket, cuttingfor and pinning in ends of brackets complete all as specified and directed. 99 Supply and fix in repairs PVC valveless syphonic action type flushing cistern 10 lit capacity low level white with inlet, ball valve, float and handle including brackets and32mm PVC flush pipe complete all as specified and directed. 100 S&F in repairs PVC connection 15mm dia, 45 Cms long with brass ferrules on both ends fixed complete all as specified and directed. 101 S & F brass chromium plated tubular towel rail 20 mm dia ‘D’ type 60 cm long between flanges ofbrass chromium plated complete all as specified and directed. 102 Supply and Fix in repairs PTMT Shelf of weight not less than 300 gms with soap dish (tray) fixed with and including Chromium plated brass screws and wooden / plastic cleats etc., complete all as specified and as directed. 103 S&F in repairs 600mmx450mm belvelled edge looking mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood with PVC / alluminium frame and fixed to wooden plugs with chromum plated brass screws, cup washers, complete all specified and directed. 104 S&F Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and as directed. 105 S&F in repair 550mmx350mm PVC Cabinet Mirror with shelves of selected quality glass and fixed on walls to wooden plugs with chromium plated brass screws, cup washers complete all specified and directed. 106 S & FPVC( SWR ) pipes 110mm dia single socketed , in any lengthwith rubber ring joints as rainwater, soil waste and vent pipe (with all fittings) fixed to wall or laid in trenches incl taking down existing pipe complete all as specified and directed. 107 S & FPVC( SWR ) pipes 75mm dia single socketed , in any lengthwith rubber ring joints as rainwater, soil waste and vent pipe (with all fittings) fixed to wall or laid in trenches incl taking down complete all as specified and directed. 108 S&F in repair PVC (SWR) bends any radius 110mm bore complete all specified and directed. 109 S&F in repair PVC (SWR) bends with access door any radius 110mm bore complete all specified and directed. 110 S&F PVC (SWR) junction single (single T) equal or unequal with access door of bore 110mm complete all specified and directed. 111 S&F PVC(SWR) vent cowl 110mm bore complete all specified and directed. 112 S&F PVC (SWR)bends any radious 75 mm dia complete all specified and directed. 113 S&F PVC (SWR)bends with access door any radious 75 mm dia complete all specified and directed. 114 S&F PVC (SWR) junction single (single T) equal or unequal of bore75mm complete all specified and directed. 115 S & F in repairs PVC (SWR) Floor trap/Nahani trap plain or multi with stainless steel grating incl joinig to waste pipe with solvent cement joint dia of outlet 75 mm bore complete all as specified and directed. 116 S&F PVC (SWR) junction single (single T) equal or unequal with access door of bore75mm complete all specified and directed. 117 S&F in repair PVC (SWR) floor trap 75mm dia outlet, plain with grating including jointing with solvent cement complete all specified and directed. 118 S&F for PVC waste pipe for urinal/WHB with fitting etc 50 mm dia. 60mm long complete all specified and directed. 119 S & FPVC( SWR ) pipes 110mm dia single socketed , in any lengthwith rubber ring joints as rainwater,(eves gutter fitted in roof forcollecting of rain water).stack clamps out of 50 mm by 5 mm flat iron and 16 mm dia round iron stays including bolts and nuts and securing ends of stays to wall or roof ,welding etc complete all as specified and directed. 120 Dismantling of old ceilling boarding, wooden sacntling any description fixed in any position with nails complete all as specified and directed 121 Dismantling of Eves gutters , wooden sacntling any description fixed in any position with nails complete all as specified and directed. 122 Providing and fixing false ceiling at all heights with GRG (Glass Fibre Reinforced Gypsum ) False ceiling tiles of size 595 x 595 mm of approved texture, design and patterns having moisture contents less than 2% humidity resistance of 99% NRCO.50 to .75 as pe IS8225:1987, Noncombustible as per BS 476 (Part 4)-1970 and light reflectance of 85% (Minimum) to be laid in true horizontal level suspended on interlocking metal T Grid of hot dipped galvanized iron section of 0.33 mm thick ( galvanised @ 120 gms per sqm including both sides ) comprising of main T runners of size 15 x 32 mm of length 3000mm, cross -T of size 15 x 32 mm of length 600mm to form grid module of size 600 x 600mm, suspened from ceiling using galvaized mild steel items ( galvanizing @ 80 grams per sqm) i..e 50mm long, 8mm outer diameter M-6 dash fastener 6mm dia fully threaded hanger rod upto 1000mm length and L-swhape level adjuster of size 85x25 x 2mm galvanised iron permieter wall angle of size 24 x 24 x 0.40mm of length 3000mm to be fixed on periphery wall/ partition with the help of plastic rawl plugs at 450 mm ceneter to centre and 50mm long dry wall wood screws. The kwork shall be carried out as per specifications, drawing and as per directions complete all as specified and directed. 123 Dismantling of AC sheets / Galvolume sheet / GI Sheet of corrugated or semicorrugated etc. sheets in roof coverings complete all as specified and directed. 124 Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed. 125 M&L for MS framed structure roof trusses (framed), trussed, purlins, crane gantriesand fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats of Grade Fe 410 -W (Gde- E- 250) quality- A etc. complete all as specified and directed. 126 S&F Pre-painted galvalume aluminium zinc coating GI based profilesteel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa, hot dip alloy of 55% Aluminium 43.5% Zinc 1.5% Silicon and finished with resin coat on both surfaces @ 150 gm/sqm of coating (total both surfaces) as in roof covering/ cladding to wall,including flashings , ridges, valley etc fixed with self tapping screws as specified 127 S&F Pre-painted galvalume aluminium zinc coating GI based plainsteel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa, hot dip alloy of 55% Aluminium 43.5% Zinc 1.5% Silicon and finished with resin coat on both surfaces @ 150 gm/sqm of coating (total both surfaces) as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed. 128 S & F for Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc. complete, drilled for fixing of steel sheeting or other covering doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing, Fe 410-W (Gde-E-165) quality-A, etc complete all as specified and directed. 129 S & F Mild steel, plain, black sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws,clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required, Thickness of sheet 1.60 mm, etc complete all as specified and directed. 130 M & L for preparation of newlyuntreated steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and as directed. 131 Material and labour Preparation new paintedwooden surfaces of any description over 10 cms width or girth not otherwise described and applying two coat of synthetic enamel paint complete all as specified and directed. 132 M&L for complete removal of existing treatment and preparation of old surfaces and applying two coat Acrylic emulsiondisptember with roller over applying minimum 1mm thick white wall care putty over prepared surface to achieve the surface even and smooth for painting complete all as specified and directed (Note:-Contractor shall furnish gaurantee of four year against service rendered) Note:- primer and emulsion paint shall be carred out through air less spray machine (Mechanical means) 133 M&L for preparation of newly plastered surfaces and applying two coat Acrylic emulsiondistember with roller over applying minimum 1mm thick white wall care putty over prepared surface to achieve the surface even and smooth for painting complete all as specified and directed (Note:-Contractor shall furnish gaurantee of four year against service rendered) Note:- primer and emulsion paint shall be carred out through air less spray machine (Mechanical means) 134 M&L for complete removal of existing treament and preparation of wall, washing, scrubbing down and stopping old treatment and painted surface of plastered / decorated surface and applyingtwo coat of Premium Acrylic smooth exterior paint and including priming coat of exterior primer and incl one coat of wall putty complete all a specified and as directed.(Note : painting will be done by brush / spray / roller of building upto the height) all as per directed by Engr -in-Charge) (Note :Rate shall be included for necessary scaffolding and safety measures where required at site ) 135 M&L for new/Old plastered / decorated surface and applyingtwo coat of Premium Acrylic smooth exterior paint and including priming coat of exterior primer and incl one coat of wall putty complete all a specified and as directed.(Note : painting will be done by brush / spray / roller of building upto the heightall as per directed by Engr -in-Charge) Note :Rate shall be included for necessary scaffolding and safety measures where required at site ) 136 M&L for HDPE Double Wall Corrugated pipe 150 mm internal bore laid in trenches & jointed as specified, and including demolition and breaking up drain pipes, complete all as specified and directed. 137 M&L for concrete bed to drain pipes 100mm dia bore using plain cement concrete (1:3:6) type C2(using 40mm graded stone aggregate) including packing under and haunching against the sides of pipes after they are laid and tested in complete all as specified and directed. 138 Taking down copper /aluminium point wiring (light, fan, bell,socketor power) complete including fixture and fittings such as switches , ceiling roses , pendent , regulators, sockets, light fitting etc.Removing materials to store for keeping in safe custody or for taking credit (credit a for above items should be made as per condition seperately) and making good distrubed surfaces ofwalls, floors etc complete all as specified and directed. 139 Taking down old/unserviceable distribution board by disconnection of electric connection carefully SPN DBs/TPN DBs/ Main Switch including old unserviceable MCCBs/ MCBs, Isolators, etc and making good to disturbed surface all as specified and directed at site. 140 Taking down carefully copper/aluminium Sub main wiring of any size fromsurface/concealed /existing conduit of any height and removing materials at site and making good disturbed surfaces of walls, floors roofs etc complete all as specified and directed. 141 Taking down existing geyser of any capacity after disconnecting all necessary electrical and water supply connections and deposit to MES store yard of AGE E/M No II complete all as specified and as directed. 142 Taking down existing single phase electric energy meter of any capacity after disconnecting all necessary electrical connections and deposit to MES store yard of AGE E/M No II complete all as specified and as directed. 143 M&L point wiring with 1.5 sqmm (nominal cross sectional area) single core, PVC insulated, unsheathed FRLSH copper cable, 1100 volts grade, with multi stranded copper conductor drawn through and including non-metallic, rigid non mettalic PVC conduit (medium grade) concealed in wall / ceilingwith and including 1.5 sqmm single core PVC insulated, multistranded, unsheathed, FRLSH copper conductor cable as continuous earth continuity conductor (green in colour) with cast Iron / pressed steel modular terminal boxes any size/module, conceiled on walls and fixed by neans of brass screws incl modular cover plates and cover frme any size/module,for mounting or housing switches, socket outlets, fan regulators, etc. including all other fixing accessories for the following complete for One light / fan /bell controlled by one, one way switch 5/6 Amps all as specified and as directed . 144 Description all as per ser item No. 143.00 above ,but for one 3 pin, 5/6 amps socket outlet point on independent boardcontrolled by one, one way 5/6 amps switch complete all as specified and directed. 145 Description all as per ser item No. 143.00 above , but for one 3 pin, 5/6 amps socket outlet point on same boardcontrolled by one, one way 5/6 amps switch complete all as specified and directed. 146 M&L point wiring with 2.5 sqmm (nominal cross sectional area) single core, PVC insulated, unsheathed FRLSH copper cable, 1100 volts grade, with multi stranded copper conductor drawn through and including non-metallic, rigid non mettalic PVC conduit (medium grade) concealed in wall / ceilingwith and including 2.5 sqmm single core PVC insulated, multistranded, unsheathed, FRLSH copper conductor cable as continuous earth continuity conductor (green in colour) with cast Iron / pressed steel modular terminal boxes any size/module, conceiled on walls and fixed by neans of brass screws incl modular cover plates and cover frme any size/module,for mounting or housing switches, socket outlets, fan regulators, etc. including all other fixing accessories for one 15A socket point independentcompleteincl taking down of old unsv point wiringall as specified and directed. 147 S&F in replacement of Ceiling rosethree terminals surface bakelite type, AC, 50 HZ, 230V complete all as specified and directed. 148 S & F modular switch1 way 6 A , 1 modulecomplete all as specified and directed. 149 S & Fmodular socket 6 Amps 2/3 pin combined2 module complete all as specified and directed. 150 S & Fswitch modular type 16 A, 1 module complete all as specified and directed. 151 S & F socketmodular type multipurposes 6/16 A, 2 module complete all as specified and directed. 152 S & Fmodular bell push type 6 A ,1 module complete all as specified and directed. 153 S & Fbell multi music type AC 230 volts single pole complete all as specified and directed. 154 S&F surface /wall mounted LED batten fiitng slim channel type poly carbonate bodyT-8 tube light luminare with system efficiency 120 lumens per watts. High quality polycarbonate end cap in white finish and snap fitted to the housing completeall as specified and directed.integrated electronic driver complete with all connectedaccessories all as specified and directed. 155 M&L for Modular angular holder with LED Bulb 9 watts complete all as specified and as directed complete all as specified and directed. 156 S & FLED bldg security light fitting30wattmade up of pressure die cast aluminium housing with acylic cover as diffuser with IP-66 protection complete incl mounting pipe made of GI tubing 40 mm size 1M length bend into size with mounting brackets nut bolt and washers all as specified and directed. 157 S&F MCB DB SPN 8 way ,IP-43, IK 09, double door type with metal doorwith 200 Amps rated bus bar ,230 volts, 50 Hz complete all as specifed and directed. 158 Supply & FixMCB SPN 32 Amps current rating C series 10 KA breaking capacitycomplete all as specified and directed. 159 Supply & FixMCB SP 6 to 32 Amps current rating C series 10 KA breaking capacitycomplete all as specified and directed. 160 Supply and fixing TV socket outlet complete all as specified and as directed. 161 M & L sub main wiring with 2 runs of 06 sqmm main wire along with 1 run of 6 sqmm earth wire (green in colour) single core FRLSH PVC insulated, unsheathed, multi-stranded, 1100 volts grade ISI marked copper conductor cable, drawn through and including adequate size rigid non-metallic PVC concealed / surface conduit (medium grade) wherever necessary with all fittings & accessories including cutting chases for conduits as required, sinking for terminal boxes, making good disturbed surfaces complete all as specified and directed.Note:- Two runs of main copper conductor, one run of earth wire and one run of PVC conduit shall be measured as one unit length. 162 Taking down existingexhaust fan/ceiling fan of any sweep after disconnecting necessary connection from ceiling rose to fan and deposit to MES store yardcomplete all as specified and as directed 163 S & Fexhaustfannon metalic single phase 230 volt of size 250 mmsweep with louverincl necessary altrationall as specified and as directed 164 S & Fexhaustfanmetalic single phase 230 volt of size 380 mmsweep with louverincl necessary altrationall as specified and as directed 165 S & F for ceiling fan, 230 Volts, 50Hz, 1200 mm sweep with down road, canopy, blades, BLDC motor etc and service value of the fan shall be greater than 6.1 as per BIS with necessary accessories and electrical connections from ceiling rose to fan teriminal includingwritting the MES Number with synthetic enamel paintcomplete all as specified and as directed. 166 Supply , fixingrigid non metallic PVC conduit fixed conceiled/on wall wherever necessary with all connectedaccessories20 mm dia forcable TV connectionscomplete all as specified and as directed 167 Supply, installation, commissioning and testing indoor type LT wall mounting Panel Board of minimum size 1.00 m (height) x 1.00 m (breath) x 0.30m (depth) factory made CPRI approved panel, weather, dust & vermin proof indoor, double door, front openable, including four compartment for fixing of 4 Nos single phase meter and MCB and providing glass view for reading of meter and providing rubber/ PVC gasket of suitable size all sides of door, withCopper strip busbar of size 25 x 5 mm wrapped with PVC sleeves with maintained the colour code and provision of making holes with Copper nuts, bolts & washers for cable connections including hydrographic insulators with nuts & bolts at both ends= 04 Nos. , made out of 2.00 mm thick mild steel CRCA sheet with suitable size angle iron supporting frame including applying two coats of Powder coated paint over a coat of red oxide zinc chrome primer over exposed external & internal surfaces suitable for 3 phase 4 wire system 415/440 volts grade including complete internal wiring with 2.5 sqmm copper wire and connections of all outgoing / incoming existing cable of any size complete incl galvalume sheetfor protection of LT panel from rain/water all as directed 168 INCOMMING:-(a)MCCBIP 44 and IP 66/67 protection Ics =100% lcu, 4 pole, 415 volts, Lcu=25 KA breaking capacity, rating 160 Amps, adjustable thermal magnetic release including all fixing accessories with both ends spreader links -01 No. (b) Digital voltmeter of range (0-500) volts, flush mounting type of size 100mm x 100mm (4”x4”) square dial with selector switch – 01 Nos(c) DigitalAmmeter (0- 500)Amps, flush mounting type of size 100mm x 100mm (4”x4”) square dial with selector switch and CTs – 01 Nos(d) LED Neon indicator lamp (RYB) with holder,230/250 volts,AC -01 set (set of three) 169 OUTGOING :-(a) MCB SPN 40 amps, 240 volts, ‘C’ curve, 10 KA allcomplete as specified and as directed - 04 Nos(b) Fixing only serviceable existing electric meter- 04 Nos 170 Replacement of Earthing complete with galvanized steel earth plate electrode 600 x 600 x 6 mm thick, buried directly in ground vertically to a depth not less than 2.25 meters deep below ground levelwith top edge of the plate not less than 1.5 Mtrs below normal ground level connect to galvanised earth lead wire of 4.0 sqmm size by means of bolts, nuts, check nuts and washers of galvanized iron or steel up to 7.5 meter length including connected to earth plate including necessary excavation & earthwork, PCC (1:3:6) type C-1 earth chamber, 40 mm thick RCC cover 1:2:4 mix with 6mm dia nominal reinforcement @ 150 mm c/c both ways etc completeall as shown in electrical plate No 5, connected to earthing test point complete including testing on completion all as specified. 171 supply and fix electric water heater storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 ltrs BEE 5 star rated complete with all accessories such as safey valve, thermostat, NRV, connecion pipe etc. 172 Supply only single phase energy meter AC 230 volt, 50 HZ, digital display from 10A to 30A all asspecified and directed by Engr-in-Charge 173 Supply and laying and testing Cable XPLE insulated, screened , PVC bedded galvanised steel strip or wire armoured electric power cable (Heavy duty) 1100 volts grade with stranded aluminium conductor of16 sqmm4 core all as specified and as directed. 174 Excavation in trenches, n. exc. 1.5 m wide and n.exc 1.5 m in depth ;for foundation, etc or for shaft, well, cesspit, manhole, pier holes etc.n. exc. 10 sq m on plan and n. exc. 1.5 m in depth and getting out soft/loose soil all as specified and as directed. 175 M&L fine sand cushioningfor cable protection in layers incl punning all as specified and directed.Note : Punned down thickness shall only be measured. 176 Supplying and laying un-reinforced precast concrete cable cover, Class LV, Type I, flat, size 250 mm x 150mm x 40mm all as specified and as directed. 177 S & F tubes, light grade,galvanised, with all fitting of size 40 mm laid in trenches for cable protection all as specified and directed. 178 Returning, filling in, trenches including spreading, levelling watering and well ramming in layers not exceeding 25 cm Soft / loose soil all as specified and as directed. 179 Removing excavated soil to a distance not exc 50 m and depositing where directed at a level not exc1.5m above the starting point all as specified and as directed. 180 M&L for LED ceiling fitting 33 to 36 watts, 2 ft x 2 ft fittings suitable for aluminium grid ceiling, lumen out put ≥ 122 lumen/ watt,THD < 10% environmental friendly, new generation, aesthetically designed, ultra modern recess mounting luminaire with high brightness SMD LEDs as light source,incl inbuilt drivers suitable for Grid ceiling complete with atration of aluminium frame work wherever necessary during installation all as specified and directed.
