Tender For Construction 03 additional class room (18X16) At High School Lidroo Advt.Cost=? 48.99 Lacs, Amount Without Gst= ? 41.52 Lacs, Gst Amount= ? 7.47 Lacs- 1 Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres: All kinds of soil : 2 Providing & Laying of stone soling (dully hand packed)including watering dressing and ramming with all carriages loading un-loading and stacking etc complete 3 Providing & laying in position cement concrete of specified grade excld. The cost of centring and shuttering all work upto plinth level(1:4:8 coarse sand 40mm nominal size crushed stone agg.) 4 Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) 5 Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) 6 RCC work in walls, incld. attchd pilasters, buttresses plinth & string courses, columns, pilars, abts, posts and sturts etc upto floor 5 level excld. Cost of cntring, shuttering, finishing and reinforcement 1:1.5:3 graded crshd stne agg. 20mm nominal size 7 Providing & laying in position cement concrete of specified grade excld. The cost of centring and shuttering all work upto plinth level(1:2:4 coarse sand 20mm nominal size crushed stone agg.) 8 Centring and shuttering including proping, strutting & removal of the same using kitply/steel sheets i/c cost of oiling/bolts etc 9 Suspended floors , balconies etc 10 lintels beams etc 11 Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in : Cement mortar 1:4 ( 1 cement : 4 coarse sand) 12 Brick work with FPS bricks of class designation 75 in foundtion & plinth in cement mortar 1:6 (1 cement, 6 coarse sand) i/c extra for Brick work with FPS bricks of class designation 75 in superstructure above plinth level upto floor V 13 Providing wood work in frames of doors, windows, clerestory windows & other frames, wrought framed & fixed in position first class imported wood (RUSSIAN KD WOOD) 14 Providing & fixing panelled or panelled & glazed shutters for doors & windows and clerestory windows including ISImarked black enamelled M.S Butt hingeswith necessary screws excluding panelling using imported wood 35mm thick 15 Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick. : in Imported wood 16 Providing and fixing wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge : imported wood 35mm thick 17 Providing & fixing of 40x5mm flat iron hold fast 40cm long including fixing to frameswith 10mm dia bolts nuts &wooden plugs and embedding in cement conc block 30x10x5cm 1:3:6mix (1cement:3coarse sand:6 graded st agg)20mm nominal size 18 15mm Cement Plaster on the rough side of single or half brick wall of mix 1:6(1 cement:6 fine sand) 19 12mm Cement Plaster of mix 1:4(1 cement:4 coarse sand) 20 Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete Size of tile 600x600 mm 21 P/L Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge:Polished Granite stone slab jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent. 22 Extra for providing glass panes of ordinary glass panes windows and clerestory window shutters wt 10 Kg/sqm (Area of opening for glass panes excld portion inside shall be measured) (3.5mm) 23 Providing and applying white cement based putty of specified thickness(1-2mm), of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 24 Distempering with 1st quality acrylic distemper (ready mixed)having VOC content less than 50 gms/litre,two or more coats on new work of approved manufacturer, of required shade and colour complete as per manufacturer’s specifications 25 Priming coat with ready mixed Pink or grey primer of approved brand and manufacture on WOOD work (hard or soft wood) 26 Painting with synthetic enamel paint of app. Brand & manufacture to give an even shade 2 or more coats on new work 27 Ruled/ Flush pointing on Red sand stone masonry/brickmasonary surface with lime, surkhi and marble dust mortar in the ratio 1:1.5:1/2 one lime : 1.5 surkhi ( 50% red and 50% light yellow surkhi):1/2 marble dust ( the rate is inclusive of all materials and labours involved & scaffolding) 28 Reinforcement for RCC work incld straightning, cutting, bending, placing in position & binding all complete (Thermo-mechanically treated bars) 29 Structural steel welded in built up sections trusses and framed work incld cutting hoisting fixing in position and applying a priming coat of approved steel primer all complete 30 P/F track deck crill make or equivalent H.I rib color coated profiled sheets 1000 to 1020mm cover width 28-35mm high crests at 250 to 255mm TCT (total coated thickness) high tensile SMP Galvalume steel with silicon modified ployester coating of approved colour of total thickness of 35 micron comprising 20 micron exterior coat of SMP over 5 micron polyester back coat over 5 micron primer coats on both surfaces incld. side and end lap and using 8mm galvalume hex self drilling fastener on each crest of sheet for connection with purlins and seam bolts at 300mm centers on all side and end laps etc. (measured for unit of laid area)0.50mm THICK (TATA DURASHINE, JSW COLORON PLUS OR EQ) I/C ALL CARRIAGES /head load etc 31 Providing ridges of hips of width 60cm overall width color coated plain sheets fixed with self drilling screws with EPDM Seal complete: 50mm thick 32 Providing and fixing plained eaves boarding. 2nd class kail wood 250x32 mm (nominal size ) 33 Providing and fixing 12 mm thick imported wood panels in soffit under roofs i/c framework and fixtures complete. 34 P/F ISI marked ornamental aluminium(coated) hardware fittings i/c all fastenings completeL-drop with lock 35 Handles 200mm 36 Handles 100mm 37 T Bolts 100mm 38 T Bolts 150mm 39 Hooks 40 Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting , hoisting , fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete Hot finished welded type tubes 41 Providing and laying Ceramic glazed wall tiles (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make(KAJARIA, SOMANY, JOHNSON make) , in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand), including pointing the joints with white cement and matching pigments etc., complete 42 Carriage of materials By Mech.Transport, from source to site of work for 40 km avg lead sand/bajree 43 Carriage of materials By Mech.Transport, from source to site of work for 40 km avg lead bricks 44 P/F PVC conduits 25mm dia (Finolex or equivalent brand) 45 P/F Light junction blocks complete as directed at site 46 P/F fan junction block complete as directed at site 47 Providing and fixing water closet squatting pan (Indian type W.C. pan with 100mm P or S trap, 10 litre low level white P.V.C. flushing cistern half/full push mechanism , including flush pipe, conforming to IS : 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required : Stainless Steel AISI- 304 (18/8) Orissa pattern W.C. pan of size 585x480mm with flush pipe and integrated type foot rests 48 Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required :- White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer (HINDWARE /CERA/KEROVIT make) 49 Providing and fixing of mirror with built in shelf of superior quality (HINDWARE /RESPITE/JOHNSON make) with all fittings and fixtures complete. 50 Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-incharge. Internal work Concealed fixing the pipe with clamps at 1.00 meter spacing including cutting chases and making good the wall etc. PN-16 pipe , 25mm OD(SDR-7.4) 51 Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-incharge. Internal work Concealed fixing the pipe with clamps at 1.00 meter spacing including cutting chases and making good the wall etc. PN-16 pipe , 32mm OD(SDR-7.4) 52 Providing and fixing C.P. brassbib cock of approved quality (JAQUAR /JOHNSON /CERA /KEROVIT make) conforming to IS standards:15 mm dia. nominal bore 53 Providing and fixing C.P. angle cock of approved quality (JAQUAR /JOHNSON /CERA /KEROVIT make) conforming to IS standards:15 mm dia. nominal bore 54 Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked(SINTEX HEAVY DUTY) with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank 55 Providing and fixing ball valve approved quality conforming to IS standards:20 mm dia. nominal bore 56 Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fitting arrangement of approved quality and colour: 600 mm long towel rail with total length of 645 mm, 78 mm wide and effective height of 88 mm, weighing not less than 190 gms. 57 Providing and fixing PTMT grating of approved quality and colour. Circular type 100 mm nominal dia. 58 Providing and fixing Polyvinyl Chloride (PVC) pipes(PRINCE TYPE-B HEAVY DUTY), incl all PVC plain fittings This includes jointing of pipes ,trenching ,refilling , all accessories & testing of joints complete as per direction of Engineer in Charge. 100mm 59 Constructing masonry main holes 45x45x30 cm inside, in brick work in cement mortar 1:4 : With common burnt clay F.P.S.(non modular) bricks of class designation 7.5. complete job i/c outer lid of heavy duty PVC i/c its frame 60 Providing and fixing of soap dish holder (JAQUAR make) with concealed fittings etc. 61 P/F VENUS/RACOLDHot water geyser (50 ltr capacity) of approved design and make i/c all fittings complete 62 P/F wall Mixer of standard make(JAQUAR/CERA or equivalent) as per specifications complete 63 P/F PVC heavy duty lids for septic tank 450x450mm size i/c all accessories , fittings etc (weight not less than 2 kgs/lid) 64 Dry random rubble masonry with hard stone in foundation and plinth: nalla Without bond stone Please Enable Macros to View BoQ information
