|
| 1 | Taking down chowkhats or frames with shutters (without taking off shuttersfrom the frames) exceeding 1.5 Sqm but not exceeding. 4.00 sqm each complete all as specified and directed. |
| 2 | Taking down chowkats or frames not exceeding 1.50 sqm with shutters (without taking off shutters from the frame) complete all as specified and directed. |
| 3 | Taking down shutter of any description exceeding 1.00 sqm but not exceeding 2.00 sqm each complete all as specified and directed. |
| 4 | Taking down and refixing shutter in same opening after repairing, area exceeding 1.00 Sqm but not exceeding 2.00 Sqm complete all as specified and directed. |
| 5 | S & F well-seasoned 2nd class hard wood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and as directed.Note : The rate quoted are deemed to be inclusive ofmaking good to the disturbed surfaces to match the existing surfaces. |
| 6 | S&F Pressed steel frames for doors of frame size 125x 60mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc. complete as specified and directed.Note : Filling of hollow portion of frames with PCC shall be measured and paid separately. |
| 7 | S&F Pressed steel frames for doors of frame size 105x 60mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc. complete as specified and directed.Note : Filling of hollow portion of frames with PCC shall be measured and paid separately. |
| 8 | Material & Labour for PCC 1:2:4 type B0 (using 12.5mm graded stone aggregate) as in filling to pressed steel frame complete all as specified and as directed. |
| 9 | S&F Factory made solid PVC door frame of size 50mm x 47mm made out of 5mm wood grain printed single side prelam PVC sheet used instead of plain colour PVC sheet & edges will be painted to match with prelam sheet complete all as specified and directed. |
| 10 | M & L for 35mm thick glazed and skeleton shutters, open rebated and prepared to receive glass, gauge, etc (without sash bars), edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass, etc sizes of members of shutters as specified in SSR Part-I, section 8, clause 8.24 (a) and fitted to chowkhats complete all as specified and directed. |
| 11 | S & F 35mm thick 2nd class hard wood factory made plain framed, panelled shutters (any number of panels) with lock rail and panel of 9mm BWP commercial ply or 12mm thick veneered particle board with commercial veneering on both faces, the size of rails and style as per IS-1003 (Part-I) kiln seasoned and chemically pressure treated complete all as specified and directed |
| 12 | Supply and fixing 35 mm thick flush shutter, solid core construction, with block board core and plywood face panels,commercial type on both sides complete all as specified and directed. |
| 13 | Supply and fixing factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppyling & fixing in the frame at site as per specification & drawing, etc complete all as specified and as directed. |
| 14 | S & F anodised aluminium frame, powder coated (minimum thickness 50 micron)for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed. |
| 15 | S & F anodised aluminium powder coated (minimum thickness 50 micron) door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, lock, hinges, anodised aluminium snap beading screws etc. complete all as specified and as directed. |
| 16 | Supply & fixing sheet glass ordinary quality 5.50mm thick glazing in square/ rectangle not exc 0.50 sqm each pane with oil putty or aluminium beads fixed to steel/aluminium frame, etc. completeall as specified and as directed. |
| 17 | Supply & fixing sheet glass ordinary quality 6.30mm thick glazing in square/ rectangle not exc 0.50 sqm each pane with oil putty or aluminium beads fixed to steel /aluminium frame, etc. completeall as specified and as directed. |
| 18 | Taking down and refixing of aluminium door after repairing including replacement of rubber gasket beading etc complete all as specified and as directed. |
| 19 | S & F in repair 100mm, 4 lever Mortice lock, vertical type complete all as specified and as directed. |
| 20 | S & F in repair double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed etc complete all as specified and as directed. |
| 21 | Taking down and refixing of aluminium window after repairing including replacement of rubber gasket beading, lock, rolleretc complete all as specified and as directed. |
| 22 | Supply and fixing aluminium anodised (powder coated) three track sliding window frame with shutters with ( 2 Nos glazed and one wire gauzed shutter) including all necessary joining cleats, hold fast, rubber gasket, snap beading and locking arrangements fixed with screws to wall etc. complete andglazing with and including 4 mm thick plain glass to aluminium frame work using rubber gasket and including stainless steel wire cloth of 0.36 mm dia & average width of aperture 1.40mm with staple or suitable fillets wire mesh fitted with screws and washers etc including aluminium grill of thickness 5mm and opening not exceeding 75mmx75mm etc with the following section of frame and shutter complete all as specified and directed:-(a) Sections for shutter:- (i) \"H\" section: 39 x 20 x 1.20 mm thick (ii) \"Interlock\" section: 39 x 20 x 1.20 mm thick(iii) \"Edge & Bottom\" section: 41 x 20 x 1.20 mm thick (b) Section for frame:-(i) Top & Sides: 92 X 29.50X 1.20mm thick(ii) Bottom: 92 X 29.70 X 1.20mm thick |
| 23 | Supply and fixing aluminium anodised (powder coated) ventilator frame (section for frame63.5 X 38.1X 1.20mm thick) with shutter(section for shutter 41 x 20 x1.2mm thick)(bottom half portion fixed and top half portion with louver)including all necessary joining cleats, hold fast, rubber gasket, snap beading and locking arrangements fixed with screws to wall etc. complete andglazing with and including 4 mm thick frosted glass to aluminium frame work and louver using rubber gasket and fixed with stainless steel wire cloth of 0.36 mm dia and average width of aperture 1.40 mm outside vent with staple and suitable wall angle of size 25.4 x 25.40 x 1.1mm thick and fillets with screws and washers etc including Deco Grill of Model / Design No. DG 104 and 6.3mm thick etc. complete all as specified and as directed. |
| 24 | M & L for prelaminated particle board 18/19mm thick and fixed as in repair to cup board shutter and shelf, interior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination fixed with screws to timber frame works complete all as specified and directed. |
| 25 | Dismantling wrought iron or mild steel work of any description nototherwise provided for complete all as specified and directed. |
| 26 | Supply & fixingframed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framedbalusters; walk ways; railings; framework of water tanksand similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed. |
| 27 | Material and labour for preparation of new wooden surfaces and applying two coats of synthetic enamel paint over a coat of pink primer on surfaces of wood of any description over 10 cm in width or girth not other wise described complete all as specified and directed. |
| 28 | M&L for preparation of newsteel surfaces of any description, not otherwise described, over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primeron steel surfaces complete all as specified and directed . |
| 29 | Supply and fixingstainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm fixed with tinned tacks, or stainless steel wire staples including all cuttings, wastage etc complete all as specified and directed. |
| 30 | S&F 100 mm long extruded aluminium alloy handles, fabricated type, anodizedcomplete all as specified and directed. |
| 31 | S&F 100 mm long aluminium anodised, barrel tower bolts of extruded section complete all as specified and directed. |
| 32 | S&F 150 mm long extruded aluminium alloy handles, fabricated type, anodizedcomplete all as specified and directed. |
| 33 | S&F 150 mm long aluminium anodised, barrel tower bolts of extruded section complete all as specified and directed. |
| 34 | S&F 300 mm long aluminium alloy, anodised sliding door bolt with hasp and staples (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast alunimium alloy and fixed complete all as specified and directed. |
| 35 | S&F 100 mm long butt hinges, medium weight, cold rolled mild steel complete all as specified and directed. |
| 36 | S & F 100 mm hasp and staples of aluminium anodised, safety type including bolt to hinges plate and fixed with screws complete all as specified and directed. |
| 37 | S & F in repair Door closer hydraulically regulated, designation No. 3 universal type, suitable for door shutters up to 1000 mm in width and of weight not more than 80 kg and fixed complete all as specified and directed. |
| 38 | S & F mild steel work as in bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges:large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and directed. |
| 39 | S & F in repairs20mm dia tubular curtain rod, brass chromium plated complete all as specified and directed. |
| 40 | S&F in repair brass chromium plated brackets for curtain rod of any size complete all as specified and directed. |
| 41 | S&F in repair 10 litres capacityPVC valveless, syphonic action type, flushing cistern, low level, white with inlet, ball valve, float and handle including brackets & flush pipe of polyethylene of low or high density or PVC 32 mm dia for low level cistern & fixing/connecting to pipes complete all as specified and directed. |
| 42 | Supply and fixed in repairs vitreous china squatting pan, Orissa pattern of size 580 mm x 440mm white withP or S trap, front or back inlet and integral foot rest (Excluding flushing cistern and flush pipe) complete all as specified and directed. |
| 43 | S&F in repair wash hand basin, white, flat back of size 550 x 400mm excluding pillar taps but including waste coupling, waste pipe and bracket, etc.including cutting for and pinning in ends of brackets or erecting stand complete all as specified and directed. |
| 44 | S & F in repair vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) complete all as specified and directed. |
| 45 | Taking down cement plaster of any description on brick or stone walls, etc including racking out joints, hacking for key, scrubbing down with water complete all as specified and directed. |
| 46 | Material and labour for rendering 15mm thick in cement mortar 1:4 on fair faces of brick work or concrete surfaces in two layers (10mm thick 1st layer + 5mm thick finishing layer) of walls, chajja, fins, facia etc. any height mixed with water proofing compound (for 5mm thick finishing layer only) @ 3 % of weight of cement or as per manufacturer’s instructions, finished even & smooth without using extra cement complete all as specified and directed.Note: (i) Water proofing compound will be measured and paid separately(ii) Cost of scafolding, any height are deemed to be inclusive in the quoted rate. |
| 47 | Supply only integral water proofing compound. |
| 48 | Material and labour for 15 mm thick rendering in cement mortar (1:6) onfair faces of brick work or concrete surfaces,finished even and smooth without using extra cement complete all as specified and directed. |
| 49 | Material and labour for 5 mm thick rendering in cement mortar (1:3) on concrete surface as in ceiling/chajja finished even and smooth without using extra cement complete all as specified and directed. |
| 50 | Material and labour for applying three coats of white wash on ceiling including preparation of new or previously untreated surfaces complete all as specified and directed. |
| 51 | M&L for preparation of new plastered surfaces of walls surfaces and applying two coats of oil emulsion distemper (any colour/tint)over a coat of primer and 1 mm thick wall care putty including rubbing with emery paper to make the wall surfaces smooth and even complete all as specified and directed. |
| 52 | Material & Labour for preparation of new plastered surfaces of walls and applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and as directed. |
| 53 | M&L for for complete removal of the existing treatment of old plastered surface of walls and applying two coats of oil emulsion distemper (any colour/tint)over a coat of primer complete all as specified and directed. |
| 54 | Material & Labour for complete removal of the existing treatment of old plastered surface of wall and applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm on old surfaces complete all as specified and as directed. |
| 55 | M&L for preparation of old plastered surfaces and applying two coats of white wash on ceiling surfaces complete all as specified and directed. |
| 56 | Demolition of stone slabs and tiles of any description or thickness in floors, aprons, walls etc, laid, bedded and pointed in any mortar complete all as specified and directed. |
| 57 | M&L for Green Marble 18 to 20mm thick (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of marble complete all as specified and directed. |
| 58 | M&L for joint free non-skid coloured ceramic tiles 7 to 8 mm thick, area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.Note: Screed bed shall be measured and paid seperately. |
| 59 | M&L for joint free non-skid coloured ceramic tiles 7 to 8 mm thick, area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm as in dado/skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.Note :- Backing coat shall be measured and paid separately |
| 60 | M&L for coloured non skid ceramic tiles 7 to 8 mm thick, area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm as in floors etc., set and jointed in neat cement slurry andpointed in white or coloured cement to match complete all as specified and directed.Note: Screed bed shall be measured and paid seperately. |
| 61 | M&L for glazed ceramic coloured /printed tiles 350x250x 7mm thick set and jointed in neat cement slurry and pointed in coloured cement to match on vertical surfaces of wall as skirting, dado, etc. complete all as specified and directed. Note :- Backing coat shall be measured and paid separately |
| 62 | Material and labourfor 15mm thick screed bed or bedding layer of cement mortar in cement mortar 1:6 for laying of floor tiles complete all as specified and directed. |
| 63 | M&L for 10 mm thick backing coat in cement mortar 1:3for fixing tiles in vertical surfaces such as riser of steps, skirting, dados, etc complete all as specified and directed. |
| 64 | Taking down eaves gutters, sewage lines andrainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swannecks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and directed. |
| 65 | M & L for 110mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls or laid in floors complete all as specified and directed. |
| 66 | S & F 110 mm bore PVC (SWR) bends any radius with access door complete all as specified and directed. |
| 67 | S&F for 110mm dia PVC (SWR) branch piece, single (single Y) equal or unequal with access door including necessary scafoldingupto any height complete all as specified and directed. |
| 68 | S & F 110mm bore, PVC (SWR) junction single (Single T) equal or unequal with access door including necessary scafoldingupto any height complete all as specified and directed. |
| 69 | M&L for treatment to sunken floor of Toilet/Bathroom as in following steps:-i)Top of RCC slab in sunken portion includingperipheral beams shall be plastered with 15mmthick in cement mortar 1:3 using approved waterproofing compound @ 3% by weight of cement finished even and smooth using extra cement,curved at the junctions. ii)Apply two coats of epoxy resin/polymer modified cementatious coating like brush bond of FOSROK/SIKA/Pedilite both on floor & beams.iii)Sunken slabs to be given 1:20 slope outward 25mm GI pipe spout with 300 mm projection beyondouter surface of wall shall be provided.iv)Water tightness of sunken portion to be tested by ponding with water for 72 hours. In case of even a slight mark of seepage, the portion to be treated and ponding shall be carried out again to confirm the water tightness of sunken slab. Note : No cutting in roof slab/beam shall be allowed for passing of CI pipes & fittings.The stage of water proofing to sunken slab shall be passed by Eng-in-charge/GE. |
| 70 | M&L 25mm thick PCC 1:2:4 Type B-1 ( using 20 mm graded crushed stoneaggregate) as in topping of floor to receive floor tiles complete all as specified and as directed. |
| 71 | M&L for PCC 1:5:10 Type E2 (using 40mm graded crushedstone aggregate) as in filling to sunken floor complete all as specified and directed. |
| 72 | Demolition of cement concrete(un-reinforced) of any description and in anypositionnot otherwise specifically provided for etc complete all as specified and directed. |
| 73 | M&L for 75 mm thick cement concrete 1:3:6 type C1 using 20 mm graded stone aggregate as in plinth protection finished fair and even with using extra cement complete all as specified and as directed. |
| 74 | S&F in repairs 15mm dia Bib tap, fancy type, chromium plated cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and as directed. |
| 75 | S&Fin repair 15 mm size stop valve, fancy type, chromium plated with long shank and cup(concealed type), cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipes or for union & fixed complete all as specified and directed. |
| 76 | S&Fin repair 15 mm size stop valve, fancy type, chromium plated, cast copper alloy, long shank, screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipes or for union & fixed complete all as specified and directed. |
| 77 | S&F in repairs 15 mm dia pillar tap, fancy type, cast copper alloy with capstan heads, chromium plated, screwed down high pressure, with or without lettered \"Hot\" or \"Cold\" with long screwed shanks and fly nuts, screwed for iron pipe & fixed complete all as specified and directed. |
| 78 | S&Fin repairs brass chromium plated shower rose 125mm size, including fixing to steel pipe or union complete all as specified and directed. |
| 79 | S&F in repairs brass chromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and directed. |
| 80 | S&F in repair PVC connection of size 15 mm dia, 450 mm long with PTMT nuts complete all as specified and directed. |
| 81 | Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels etc., and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exceeding 10 cm girth in brick walls etc complete all as specified and directed. |
| 82 | Taking up or down steel tubing 15mm boreand connections including cleaning for refixing or removal to store complete all as specified and directed. |
| 83 | Taking up or down steel tubing 20 mm boreand connections including cleaning for refixing or removal to store complete all as specified and directed. |
| 84 | S&F CPVC pipes 20 mm outer diameter of SDR 11 & plain CPVC SDR 11 and fittings as in walls, ceiling, floor, etc. complete all as specified and directed. |
| 85 | S&F CPVC pipes 25 mm outer diameter of SDR 11 & plain CPVC SDR 11 and fittings as in walls, ceiling, floor, etc. complete all as specified and directed. |
