Tender For Additional / Alternator/ Improvement To Area In Front Of Stn Hq; 1 Demolition of cement concreteor other wise specifically provided for all as specified and directed. 2 Earthwork excvation in trenches with (hard/dense soil) n exc 1.5m wide and nexc 1.5m in depth for foundation etc or shefts , wells , cess pits, manholes etc n exc 10sqm on plan and n exc 1.5m in depthand getting out all as specified 3 PCC (1:4:8) type D-2 using 40 mm graded stone aggregate as in foundation filling and mass concrete all as specified and as directed 4 M & L for TMT bars for reinforcement 10mm dia and over cut to lengths, bent to shape required including cranking, bending etc and binding with mild steel wire (annealed) not less than 0.9mm dia 5 All as per item No.04 here- in- before but 5mm and over upto and including 10mm dia TMT bars in stirrups, spaces and binders 6 M & L Form work to sides of Concrete foundation , footings, bases of columns, raft beams and soffits of foundation and plinth beam and similar work vertical or to batter etc with fair finished surfaces of concrete flat all as specified and directed 7 M & L RCC mix ratio M25 (20mm aggregate) Design mix in foundation, including rafts, footings, plinth beams, bases for columns etc and mass concrete all as specified 8 M & L Formwork for sides and soffits of floor or roof beams, beam haunching, girders, bressummers, lintels/ Chajjas, cantilevers, shelves inlcuding supports overhangs, etc also splays between floors and beams etc. 9 M & L RCC mix ratio M25 (20mm aggregate) Design mix in Lintel / chajja and roof beam over 1.5 m span etc all as specified 10 Demolition of brickwork or stone/boulder masonary, build in cement mortar or cement lime mortar including all quoins, arches, pillars, etc, butall as specified 11 M & L for PCC block masonry Type C1 1:3:6 (20mm aggregate) setting in CM 1:4 with solid blocks exc 10cmin width and setting in mortor, complete 12 Returning filling in including spreading leveling and well ramming in layers n.exc 25 cm thick. 13 Removing excavated material to a distance exc 250m but n.exc 500 m and depositing where directed at a level n.exc 1.50m from starting point. 14 Demolition of cement concreteor other wise specifically provided for all as specified and directed. 15 M&L Hardcore Broken stone or boulders of gauge n exc 63mm, deposited, spread and levelled in layers n exc 15cm tk, watered and rolled/ rammed to a true surface all as directed 16 M&L for 150mm thick Plain Cement Concrete TypeC2 ,1:3:6 (using 40 mm graded stone aggregate) in sub base of flooring & plinth protection etc 17 Taking down cement plaster on brick or stone walls, ceilings,roof slab etc including racking out Joints, hacking for key, scrubbing down with water, etc 18 Material and labour 15 mm thick cement plaster/ back coat/ sceed bedin CM 1:4 for wall finished even & smooth without using extra cement. 19 Material & Labour for applying Twocoats ofacrylic emulsion paintof Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives over and including priming coat of exterior primer applied on newplastered surfacesofwalls complete as mentioned in SSR all as specified and as directed . 20 M&L for (Black) Granite tiles 18-20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete 21 M&L 18-20mm thick Granite (Black) tiles machine cut, in skirting/ dado laid over cement screed and jointed with grey cement slurry, and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete all as specified. 22 Providing edge moulding to 18-20mm thick Granite stone any description on counters vanities etc. including machine polishing to edge to give high gloss finish etc. complete. 23 S & F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walkways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 24 S & F Brass/ SS 304 grade 3D Lettering wall mount of Each letter not more than 1 feet height and AF logo W 2.5 X H3 with UV clear print on plate fixed with including necessary brackets etc complete all as specified by Engr in charge 25 Removing old demolished u/s building materials than items mentioned in schedule of credit tto a distance of more than 1.50km , beyond the lead included in the rates, including loading, unloading and stacking at the destination otherNote: Place of deposition and obtaining permission from local authorities etc., in this regard shall be contractors responsibility.
