Name of Work:- Construction Of Ticket Checking Counter At Kochandi Check Post In Goodrical Range During The Year 2025-2026
Sl. No.
Item Description
1
Surface dressing of the ground including removing vegetation and in-equalities notexceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m.All kinds of soil
2
Solid block masonry using pre cast solid blocks ( Factory made) of size 40x20x10cm or nearest available size confirming to IS 2185 part I of 1979 for foundation and plinth for 10 cm thick wall in CM 1:6 ( 1 cement : 6 coarse sand) including cost of scaffolding etc complete
3
12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)
4
Applying one coat of water thinnable cement primer of approved brand andmanufacture on wall surface:Water thinnable cement primer
5
Providing and fixing plain multipurpose cement board(Hight pressure steam cured) with suitable screws for cement particle board in ceiling etc. complete (frame work to be paid seperatately).6 mm thick cement fiber board as per IS: 14862
6
Providing and laying in position cement concrete of specified grade excluding thecost of centering and shuttering - All work up to plinth level:1:5:10 (1 cement : 5 finesand derived from natural sources : 10 graded stone aggregate 40 mm nominal sizederived from natural sources)
7
Steel work for purlin/single section with G I pipes including cutting, hoisting, fixingin position and applying a priming coat of approved steel primer, including weldingand bolted with special shaped washers etc. complete
8
Providing and fixing precoated galvanised iron tile roofing sheets (size, shape andpitch of corrugation as approved by Engineer-in-charge) 0.40 mm (+0.05%), total coatedthickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxyprimer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge.The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.Details of cost for 216.14 sqm (External dimension of plinth). Area of roof = 20.2x10.70 m =216.14 sqm.
9
Providing and fixing precoated galvanised steel tile sheet roofing accessories 0.40mm (+0.05%) total coated thickness, zinc coating 120 grams per sqm as per IS:mm(+0.05%)totalcoated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steelgrade, 5-7microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/self tapping screws complete:Ridges plain (500-600 mm),Details of cost for 20.20 metre MATERIAL: one piece plain ridges Consider a shed of 20x10 m(external dimensions at plinth). Please Enable Macros to View BoQ information
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
