Tender For Special Repair Of Echs Polyclinic Bldg At Ara Under Ge Af Stn Bihta.; 1 B/R WORKS 2 PCC type B-2 (1:2:4), using 40 mm graded stone aggregates as in surface channel and drain complete all as specified. 3 PCC type D-2 (1:4:8), using 40 mm graded stone aggregates as in filling & mass concrete, complete all as specified. 4 Cement concrete, type B-1 (1:2:4), using 20 mm graded stone aggregates as in cills, steps, seicmic and other similar band, plinth courses, lacing courses , copings, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angle and throating complete all as specified. 5 Precast reinforced cement concrete (1:2:4) type B-1 using 20mm graded stone aggregate as in manhole covers and the like duly placed on manholes with cement mortar (1:4)complete. 6 Brick work using bricks as specified in PS clause 5.1, straight or curved on plan exceeding 6.00 metre mean radius built in cement mortar (1:6), complete all as specified. 7 Brick work in half brick thick wall using bricks as specified in PS-II clause 5.1, straight or curved on plan exceeding 6.00 metre mean radius built in cement mortar (1:4), complete all as specified. 8 Factory made, flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides, 40 mm thick, ISI marked, complete all as specified. 9 Aluminium anodised barrel tower bolt of extruded section 200 mm long, ISI marked, complete all as specified. 10 Aluminium alloy, anodised, ISI marked sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet, cast or extrudedsections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy 300 mm long,complete all as specified. 11 Mild steel 100 mm long butt hinges heavy weight cold rolled, ISI marked complete all as specified. 12 Extruded aluminium anodised handles fabricated type with plate 150 mm long, ISI marked complete all as specified. 13 Double leg aluminium anodised door stopper with rubber foot, ISI marked and fixed to bottom rail of doors with steel screws, complete. 14 Stainless steel conduit 20 mm bore, cut to size and erected in position as curtain rod on backets, with & including SS decorative finials & brackets, PVC rings @ 10 nos. per metre, fixed to walls with PVC rawl plugs & SS screws, IN REPAIRS, complete. 15 Stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperature 1.40 mm and fixed with tinned tacks or steel wire staples,all as specified. 16 Framed mild steel work such as grills, grating etc. with ends of bars shouldered and or riveted or forged into spikes, framed guard bars, railings and similar work confirming to Fe-290-Gde E-165, complete all as specified. 17 Mild steel TMT bars 10mm dia and over,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified. 18 26mm outer dia stainless pipe of grade-304, cut to length, bent to required shape and size for railing or any frame work including welding / grinding and polishing etc complete all as specified. 19 42mm outer dia stainless pipe of grade-304, cut to length, bent to required shape and size for railing or any frame work including welding / grinding and polishing etc complete all as specified. 20 Galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed, IN REPAIRS, (each line wire to be measured)complete all as specified. 21 Steel window with side hung double shutters (inside gauze & out side glaze shutter) with pressed steel box type frame, including box type hinges, with handles steel peg stay complete including window grill with & without glazing bar, frame fixed with MS screw 100mm dovetailed or welded including dovetailed or welded,including one shop coat of zink chromate primer complete all as specified.NOTES : (a) Profile section used under these items as shown in drawing No. CE/ALD/TD-172 sheet 1/2 & 2/2as applicable.(b) Rate of PCC filling for window frame including in this item. 22 Factory made pre painted pressed steel frames, conforming to IS,having profile 105 mm x 60 mm for doors with one or more rebates made out of 1.25 mm thick mild steel sheet, including necessary fixing lugs, butt hinges, lock strike plate, etc & including duly filled with PCC(1:3:6) type C-0 complete, all as specified. 23 Powder coated (minimum thickness of powder coating 50 micron)aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified. 24 Powder coated aluminium door shuttersfixed type without sash bar including anodised alumnium alumnium glazing snap beading, rubber neoprene packing including joining cleats &screws etc as per manufacturers instructions, complete all as specified.NOTES: (a) Each shutter shall have2 Nos. 200 mm long almn handles and 03 No. 100 mm size stainless steel/almn butt hinges.(b) Glass and other filling materials in panels including wire cloth and almn grill shall be measured & paid for separately under respective item of BoQ.(c) For powder coated aluminum sections minimum thickness of powder coating shall be 50 micron. 25 12mm thicl prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with metal frame work etc complete all as specified. 26 25 mm thick, cement concrete type B-0, 1:2:4 using 12.5 mm graded stone aggregate, finished even & rough, as in sub floors, complete all as specified. 27 75 mm thick, cement concrete type C-1, 1:3:6 using 20 mm graded stone aggregate, finished even & smooth without using extra cement, as in plinth protection,and joints shall be sealed with joint sealing comound grade A complete all as specified. 28 Glazed ceramic coloured tiles 6- 8mm thick (square/ rectangular) area of each tile exc. 0.16 sq.m but n. exc. 0.20 sq.m,on vertical surfaces as in skirting, dado etc. set and jointed in neat cement slurry & pointed with polymer based groutof matching shade, laid over and including 10mm thick rendering in cement mortar (1:4) complete all as specified. 29 Non skid ceramic coloured tiles 7 to 8mm thick (square/ rectangular) area of each tile exc. 0.06 Sq.m but n. exc. 0.11 Sq.m,laid in floors etc, set and jointed in neat cement slurry and pointed with grout of matching shade of tiles, laid over and including 15 mm thick bedding layer in cement mortar (1:4), complete all as specified. 30 Granite 15-18 mm thick,as in step, jambs, cooking platform and like, machine cut, machine polished,bedded and jointed with grey cement slurry & pointed with grout of matching shade including necessary cutting over & including 10 mm thick (average thickness) cement mortar (1:4), complete all as specified. 31 Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc., and brushing a coat of cement slurry with 3 kg of cement per Sq.m, complete all as specified. 32 Factory made PCC colured chequered tiles, ISI (IS:13801) marked, 22-25 mm thick, of size 300 mm x300 mm, in floors, over & including 15 mm thick cement mortar (1:4) screed, set and jointed with grey cement slurry complete, all as specified. 33 Rendering 5 mm thickon fair faces of concrete surfaces, finished even and smooth on ceiling in cement mortar (1:3), complete all as specified. 34 Rendering 15 mm thickon fair faces of brick work or concrete surfaces, finished even and fairon walls in cement mortar (1:6)complete all as specified. 35 Rendering 15 mm thickon fair faces of brick work or concrete surfaces, finished even and fair on walls in cement mortar (1:4), mixed with or without water proofing compound as per manufacturers instructions, complete all as specified.NOTE: WPC will be measured and paid for separately under respective item of BoQ. 36 Supply only water proofing compound, ISI marked, complete all as specified. 37 Two coats of white washing on old ceiling surfaces, including preparation of surfaces, complete all as specified. 38 Three coats of white washing on new plastered ceiling surfaces, including preparation of surfaces, complete all as specified. 39 Two coats of cement base paint on new plasteredwall surfaces, including preparation of surfaces, complete all as specified. 40 Complete removal of existing treatment of any description, including prepration of wall surfaces of any description and applying the Two coats of cement base paint complete all as specified 41 Prepration of new plasterd wall surfaces of any description complete all as specified and applying the following: -(a) Applying wall care putty, in two coats& smoothening the surfaces as specified. (preparatory to paint as directed).(b) Two coats of interior acrylic distemper/oil bound distemper over and including a coat of interior primer. 42 Complete removal of existing treatment of any description, including prepration of wall/ceiling surfaces of any description complete all as specified and applying the following: -(a) Applying wall care putty, in two coats& smoothening the surfaces as specified. (preparatory to paint as directed).(b) Two coats of interior acrylic distemper/oil bound distemper over and including a coat of interior primer. 43 Hacking out old broken glass (any thickness, size, quality or description) from wooden / metal frames or stones, concrete or brick surrounds, glazed with putty or fixed with glazing pins / clips etc complete all as specified 44 Plain sheet glass 4mm thick ordinary quality and glazing with oil putty or wooden beads in squares n. exc. 0.5 Sq.min each pane complete all as specified. 45 One coat (finishing coat)of synthetic enamel paint over wood and wood based surfaces of any description not other wise described over 10cm width or girth, including preparation of surfaces, complete all as specified. 46 Two coatsof synthetic enamel paint over & including a coat of pink primer over wood and wood based surfaces of any description not other wise described over 10cm width or girth including preparation of surfaces, complete all as specified. 47 One coat (finishing coat)of synthetic enamel paint over old painted steel or iron surfaces of any description not other wise described over 10cm width or girth including preparation of surfaces, complete all as specified. 48 Two coatsof synthetic enamel paint over & including a coat of red oxide primer over steel or iron surfaces of any description not other wise described over 10cm width or girth including preparation of surfaces, complete all as specified. 49 1000 litre capacity, white, three layered polyethylene water storage tanks (cylindrical vertical with threaded lid) including hoisted and fixed in position, making connections, IN REPLACEMENT, complete all as specified including the following acessories: -(i) Gun metal ball valves, high pressure, with metal rod & high density plastic ball complete screwed for iron pipe or brass ferrule and fixed, suitable for 20 mm bore GI pipe, complete all as specified.(iii) Gun-metal stop valve (quarter turn type)with MS lever handle, suitable for 20 mm bore GI tubes, ISI marked, screwed both ends for iron pipe, complete all as specified.(iv) Provn of 20 mm bore GI light grade tube from O/H tank to nearest mouth of RWP complete all as specified.(v) Nipple 20mm (Minimum weight 20mm-45gms,) 50 Steel tubes ‘medium grade’, galvanized with all fittings and fixed to walls and ceilings or laid in floors, including taking down existing tube complete all as specified of size: - 51 15mm bore 52 20mm bore 53 Concealed stop valve/cock, cast copper alloy, chromium plated, with wall flange, screwed end for iron pipe or for union and fixed, suitable for 15 mm bore pipe, IN REPAIRS, complete. MAKE: PRAYAG Cat No. P-6518 or equivalent make mentioned in Appndix B. 54 Bib tap, cast copper alloy, chromium plated fancy type, long body with wall flange, screwed end for iron pipe or for union and fixed, suitable for 15 mm bore pipe, IN REPAIRS, complete. MAKE:PRAYAG Cat No. P-6508 or equivalent make mentioned in Appndix B. 55 Pillar tap, cast copper alloy, chromium plated fancy type, screwed end for iron pipe or for union and fixed, suitable for 15 mm bore pipe, IN REPAIRS, complete. MAKE: PRAYAG Cat No. P-7802-N or equivalent make mentioned in Appndix B. 56 Overhead ABS 125mm shower with brass arm 225 mm long with flange andfixed in position, IN REPAIRS, complete.MAKE: PRAYAG Cat No. CPOH-2 or equivalent make mentioned in Appndix B. 57 Brass chromium plated towel rail600 mm long, fixed to wall with SS screws and PVC rawl plugs, IN REPAIRS,complete.MAKE: PRAYAG Cat No. CPA-10 or equivalent make mentioned in Appndix B. 58 Soap dish stainless steel chromium plated decorative type approximate size 160x160x90mm, IN REPAIRS, complete all as specified. 59 PVC connections 15 mm size of length 450 mm with PTMT nuts, IN REPAIRS, complete all as specified. 60 20mm bore brass ball valves, high pressure with polythene float and fly nut screwed for iron pipe or brass ferrule and fixed complete all as specified. 61 Vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm, ISI marked, white, with integral foot rests (excluding flushing cistern and flush pipe), 110x125 size uPVC P trap & necessary joints, cement concrete, IN REPAIRS, complete all as specified. 62 Vitreous China wash down water closet pan (pedestal pattern), white ISI marked, with & including stainless steel body Jet spray (L-bend) with 1.50 metre long braded tube tube, soft close ISI marked PVC seat & cover,IN REPAIRS, including connection to drain etc complete all as specified 63 Vitreous China wash basin, white, flat back, size 550 x 400 mm, ISI marked,including fixing acessories like rag bolts etc. with CP waste coupling half or full threaded suitable for & including 32 mm size PVC solid waste pipe, IN REPAIRS, complete all as specified. 64 PVC flushing cistern 10 litre capacity, syphonic action type, any shade, dual flush, ISI marked with flush pipe and all fixing acessories,IN REPAIRS, complete all as specified. 65 Looking mirror 600 x 600 mm, selected quality glass 5.5 mm thick, mounted on PVC ply not less than 4 mm thick, and provision of PVC frame alround fixed with chromium plated brass screws and rawl plugs, IN REPAIRS, complete. 66 uPVC pipes, 110 mm external dia pipe, type-A, ISI marked (IS:13592) single socketed in any length with or without rubber ring joints, fixed to wall with PVC bracketsas SWR / rain water pipes, IN REPAIR, complete all as specified. 67 uPVC/PVC bends any radius, complete all as specified. suitable for uPVC soil waste discharge pipes 110 mm external dia. 68 Cement concrete (1:3:6) type C-2 using 40mm graded stone aggregate as in bed todrain pipesof any description including packing under and haunching against the sides of 250mm bore pipe complete all as specified. 69 Reinforced concrete pipes 250 mm bore, class NP-2, laid and jointed complete with collars, laid in trenches and jointed, ISI marked, complete all as specified. 70 Forming contraction joint 30mm deep x10mm wide including provision of 10 mm dia polyurethene foam closed cell backup rod and sealed with sealing compound Grade B complete all as specified. 71 Sign board of size3.50m x 0.80m made out of aluminium composite panel board 3mm thick having PVDF coating skin thickness not less than 0.25mm thick high intensity reflective maintenance free sheet including writing letters / site map as per requirement / location with high reflective sheet / tape of make 3M. colour & design as approved including stainless steel frame work with vertical pipes as per 319AISI the frame consist of SS square pipes of size 25mmx20mm having thickness 1.5mm and vertical post made of SS square 50mm dia pipe, 1.5mm thick complete as directed by Engineer-in-Charge. 72 E/M WORKS 73 Point wiring with multi-stranded copper conductor, single core, FRLSH PVC insulated and unsheathed cable, including FRLSH PVC insulated unsheathed stranded copper conductor single core cable as earth continuity conductor to common earth and connected to earth dolly, with and including GI terminal boxes, ISI MARKED, with 3 mm thick plastic/bakelight laminated sheet cover having necessary cutting for fixing switches/ socketscomprising the following: - 74 One light point controlled by one switch or one fan point controlled by one switch & fan regulator etc. or for bell/buzzer with 1.5 Sq. mm (nominal area) cable & 1.5 Sq. mm (nominal area) cable as earth continuity conductor, in and including rigid non metallic PVC medium duty concealed conduit not less than 20mm dia all as specified. 75 One Socket outlet three pin, 6 Amp, on the same board, with 1.5 Sq. mm (nominal area) cable & 1.5 Sq. mm (nominal area) cable as earth continuity conductor, all as specified. 76 One socket outlet three pin, 6 Amp, independent, with 1.5 Sq. mm (nominal area) cable &1.5 Sq. mm (nominal area) cable as earth continuity conductor, in and including rigid non metallic PVC medium duty concealed conduit not less than 20mm dia all as specified. 77 One socket outlet three pin, 6/16 Amp, independent, with 2.5 Sq. mm (nominal area) cable & 2.5 Sq. mm (nominal area) cable as earth continuity conductor, in and including rigid non metallic PVC medium duty concealed conduit not less than 20mm dia all as specified. 78 NOTES: (a) Switch(es) & socket(s) shall be measured & paid for separately under respective item of Schedule A. (b) GI boxes shall be fixed flush to walls in position with cement mortar (1:4). 79 Switch piano flush button single pole one way, 6 Amp, complete all as specified and directed. 80 Switch piano flush button single pole one way, 15/16 Amp, complete all as specified and directed. 81 Socket outlet multipurpose having provision for 2&3 pin, 6 Amp, flush type, complete all as specified and directed. 82 Socket outlet multipurpose having provision for two-in-one 3 pin 6 Amp & 3 pin 16 Amp, flush type, complete all as specified and directed 83 Switch Socket combo of capacity 5/6 Amp, IN REPLACEMENT, complete all as specified and directed. 84 Switch Socket combo of capacity 15/16 Amp, IN REPLACEMENT, complete all as specified and directed. 85 Top Plug of capacity 5/6 Amp, complete all as specified and directed. 86 Top Plug of capacity 15/16 Amp, complete all as specified and directed. 87 Ceiling rose, surface bakelite, 65 x 50mm, three terminals, complete all as specified and directed. 88 Lamp (angle) holder, insulated body, cord grip pattern, complete, all as specified 89 Electric buzzer AC 230 volt, single pole, bell push button type complete, all as specified 90 Electric buzzer AC 230 volt, single pole, Ding Dong type complete, all as specified 91 Fan regulator (electronic) suitable for 48”/56” sweep fan, steped type, single phase,complete all as specified. 92 Sub main wiring (with approved colour coding as per IS) with single core FRLSH PVC insulated flexible stranded copper conductor 1.1 KV grade (main cable: number of runs as indicated below along with single core FRLSH PVC insulated flexible stranded copper conductor 1.1 KV grade for earthing in conduits, with and including rigid non metallic PVC medium duty concealed conduit not less than 25mm dia complete all as specified for the following: - 93 2 runs of 6 Sq. mm main cable + 1 run of 6 Sq. mm earth cable 94 NOTES: (i)For payment purposes, total runs of main cable (each run of one running metre) as mentioned above and one run (one running metre) of earth cable shall be considered together as 1 RUNNING METRE 95 Sheet metal enclosure for DB for fixing MCB’s, isolators etc., having IP-43 protection, with bus bar neutral link earth bar, din rail, blanking platesuitable for surface and flush mounting, IN REPLACEMENT, complete all as specified comprising the following: - 96 SPN, 8 way with 2mp rated bus bar, 240 V, double door type. 97 SPN, 12 way with 100 Amp rated bus bar, 240 V,double door type 98 Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 16-32 Amp, 240 volt, breaking capacity not less than 10 kA, IN REPLACEMENT,complete all as specified and directed. 99 MCB suitable for 240 volt AC supply, SP with over load and short circuit protection and rupturing capacity not less than 10 kA, C curve type of rating6 to 32 Amp,complete all as specified. 100 MCB suitable for 240 volt AC supply, SPN with over load and short circuit protection and rupturing capacity not less than 10 kA, C curve type of rating 32-40 Amp,complete all as specified. 101 LED lights fitting 1x 20w, 220V,AC decorative box type with driver, including holder suitable for carrying 4ft LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose, IN REPLACEMENT, complete all as specified. 102 Surface mounted environment friendly LED 10 Wbatten with polycarbonate housing & integrated electronic driver, lumen output should not be less than 90 lumens per watt including making connections up with three core flexible copper conductor cable, IN REPLACEMENT, complete all as specified. 103 LED bulb 9 watt,IN REPLACEMENT, complete all as directed. 104 Environment friendly, modern design, energy saving surface mounted, decorative STUD 10 W bulk head LED luminaire with premium quality diffuser for glarefree light, 6000K, including making connections up with three core flexible copper conductor cable,IN REPLACEMENT, complete all as specified 105 Exhaust fansteel body of size 300mm sweep with louvers, 900 RPM 230 volts single phase AC supply complete with bolt, nuts and washer and including PVC insulated and overall sheathed flexible 3 core 0.5 Sq.mm copper conductor cable from ceiling rose to exhaust fan for giving connection complete, IN REPLACEMENT,all as specified. 106 Ceiling fan complete with blades, down rods, stepped type electronic regulator and accessories, 230 volt, 1200mm sweep with service value 6.00 BEE with brushless direct current motor (BLDC) including PVC insulated and overall sheathed flexible 3 core 0.5 Sq.mm copper conductor cable with & including remote control complete all as specified 107 Electric water heater storage type steel body withinner tank (as per manufacturer instruction)and heating element upto 2 kw capacity 25 litre, BEE 5 star rated complete with all accessories such as safety valve, thermostate, NRV, steel PVC connector for hot water etc complete all as specified. 108 Earthing with and including GI earth plate electrode 6 mm thick of size 600 mm x 600 mm with 4 Sq. mm GI wire earthing lead by means ofGI or steel bolts/nuts/washers, protected by 15 mm bore GI light grade pipe. Earth plate shall be surrounded by alternate layer of charcoal or coke and common salt 15 cm thick all around bottom and top. 20 mmbore GI light grade pipe for watering and including funnel, wire mesh, RCC cover, reinforced with 8 mm dia TMT bars @ 75 mm C/C both ways with mild steel handle 12 mm dia, using round bar, PGI funnel with wire mess & frame, PCC (1:2:4) type B-1 (using 20 mm graded crushed stone aggregate) as in earthing pit including necessary excavation & earth work, all as specified & shown in electrical plate No. 3 of MES Schedule Part – I. IN REPLACEMENT, complete all as specified.Note:- (i)PCC chamber shall be constructed at least 1.5 metre away from the earth electrode and pipe for watering shall be provided in slanting manner. (ii) The unit rate includes earthing lead & protection pipe upto 7.5 metre from top of earth plate.(iii) Earth resstance shall be less than 3 ohm. In case the test results are not found less than 3 ohm, complete earthing shall be redone by the contractor without any extra cost to Govt. 109 Demolition and Dismantling work 110 Taking down chowkhats or frames with shutters (without taking off shutters from the frames) area not exceeding 1.50 Sq.m each and removing from site all as specified. 111 Taking down chowkhats or frames with shutters (without taking off shutters from the frames) area exceeding 1.50 Sq.m but not exceeding 4.00 Sq.m each and removing from site all as specified. 112 Taking down shutters of any description exceeding 1 Sq. m but not exceeding 2 Sq. m each, including stacking at directed location, complete all as specified. 113 Taking down cement plaster of any description on brick walls or concrete surfaces etcincluding raking out joints, hacking for key, scrubbing down with water etc complete all as specified. 114 Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and removing serviceable tiles to store and rubbish off the premises complete all as specified. 115 Demolition brickwork or stone / boulder masonrybuilt in cement mortar including all quoins, arches, pillars etc complete all as specified 116 Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc., laid, bedded and pointed in any mortar complete all as specified. 117 Demolition of cement concrete (unreinforced) in ground floors and pavings not excceding 15cm thickness (above or below ground level) all as specified 118 Taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete with batten, casing caping of MS or and PVC conduit on surface or concealed, including switches, ceiling roses, pendants, regulators, sockets, mild steel terminal boxes etc., removing materials and making good disturbed surfaces due to taking down etc. to the entire satisfaction of Engineer-In-Charge, complete all as specified. 119 Taking down carefully copper/aluminium sub main wiring complete, including existing batten/conduit consealed/surface etc., removing materials and making good disturbed surfaces due to taking down etc. to the entire satisfaction of Engineer-In-Charge, complete all as specified. 120 Notes:Amount ofcredit for retrieved materials is mentionedintender documents in pdf form which will be deducted while acceptance of tender offline.
