Tender For Special Repair To Bldg No T-44 & T-80 Of 71 Omp At Khalsar And Spl Repair To Bldg No T-95, P-2, & P-16 At Ng Bn Base Camp-Iii Under Ge 873 Ews.; 1 Taking down chowkats or frames with shutters (without taking offf shutters from the frames) not exc. 1.5 sqm eachcomplete all as specified and directed. 2 Taking down chowkats or frames with shutters (with out taking off shutters from the frames) exc 1.5 sqm but n. exc 4 Sqm each. (Steel/ Wooden) complete all as specified and directed. 3 Excavation over areas, n exc 1.5m deep and getting out in hard/dense soil complete, all as specified. 4 Excavation over areas, above 1.5m and n exc 3.0m in deep and getting out in hard/dense soil. 5 M&L for PCC (1:3:6), type C-2 (40mm graded crushed stone agg) as in foundation of Soakwell, complete all as specified and shown on drawings. 6 M&L for walling of random rubble, uncoursed and soildly hearted builtin cement mortar 1:4 completed all as specified and shown on drawings 7 M&L for Walling of random rubble, uncoursed, well bonded, laid dry in retaining walls, abutments and similar work 8 M&L for Loose filling with aggregates of gauge 80 to 150 mm in soakage pits, soakage wellsand shown on drawings. 9 Precast reinforcement cement concrete 1:2:4 type B-I (using 20mm graded crushed stone aggregate) as in cover slabs (for manholes etc.) chullas hoods, chajjas, shelevs and similar articles with plain faces, set in cement mortar 1:4 complete all as specified and as shown on drawings. 10 M&L forM-25 Slabs, supprorted on wall, beams and columnsin floor, roofs, landing, balconices, canopies, deck slabs and in shelves and like complete all as specified. 11 Returning filling in including spreading, levelling, watering and well ramming in layers not exceeding 25cm as in soft/loose soil 12 Removing excavated material to a distancebeyond 50 m and upto a total distance of 250 m.and depositing where directed at level not exc 1.5m above the starting point all as specified and as directed. 13 M&L for form work to soffits of suspended slab such as roof slabs, floor slabs, landings and similar work n exc 200 mm thick (Horizontal or sloping) flat rough finished surfaces. 14 M&L Mild steel bars 10mm dia and over, cut tolength, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as specified and directed. 15 Demolition of cement concrete (unreinforced) in ground floors and pavings exc 15cm thickness ( below or above ground level) complete all as specified and directed. 16 M&L 40mm thick plain cement concrete 1:2:4 type B-0 using 12.50mm graded crushed stone aggregate) as in floor complete all as specified and as directed. 17 M&L for PCC 1:3:6 type C2 75mm thick using 20 mm graded stone aggregate as in plinth protection and Finishing cement concrete surface even and smooth with out using extra cement. 18 Providing cement concrete type C-2, 1:3:6 ( using 20mm graded stone aggregate), 75 mm thickas in plinth protection laid in bays not exceeding 2 Sqm each and finishing even and fair ontop without using extra cement with 6mm wide joints throughout the thickness of plinth protection in concrete bays and in between the walling and plinth protection, filling the joints with mastic filling comprising of one part of heated bitumen 85/25 or 95/10 grade and 3 parts of sand ( all by weight) complete all as specified and directed. 19 M&L for 15mm thick plastering in CM 1:4 on brick surfaces of wallS&Finishing the surface even & smooth complete all incl water proofing compound all as specified and directed. (Note : WPC shall be measured seprately) 20 M&L for rendering on Roof Top 20mm thick on fair faces of brick work or concrete surface finished even and smooth (without using extra cement) in CM 1:4 including with using water proofing compound.(Note : WPC shall be measured seprately) 21 Supply only Integral water proofing compound 22 Taking down cementplastering on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc of any descriptioncomplete all as specified and directed. 23 M&L for rendering 10mm thick on fair faces of brick work or concrete surface finished even and smooth (without using extra cement) in CM 1:6complete all as specified and directed. 24 M&L for rendering 5mm thick on fair faces of brick work or concrete surface finished even and smooth (without using extra cement) in CM 1:3 on ceiling. 25 Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. 26 M&L for Non Skid ceramic coloured tiles 7 to 8mm thick (square / rectangular) area of each tiles exceeding 0.06sqm but not exceeding 0.11sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incl Screed bed or bedding layer of mortar 15mm thick in Cement Mortar 1:6 for laying floor finishes. 27 M&L for Glazed ceramic coloured tiles in vertical surfaces 350 x 250 x 7mm / 450x350x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10mm thick rendering in CM 1:3 as in back coat complete all as specified and directed. 28 M&L for 75 mm thick PCC 1:4:8 type D2 (40mm graded aggregate) as in sub base complete all as specified and directed by Engr-in-charge 29 M&L for Chequered cement concrete tiles 20cm x20cm x 25mm thick,set with grey cement and pigments in floor etc, jointed and pointed in neat cement slurry with pigments to match the colour of tiles over and including 20mm thick screed bed in cement mortar 1:6 complete all as specified and as directed by the Engineer-in-Charge. 30 M&L for 100 mm thick PCC 1:4:8 type D2 (40mm graded aggregate) as in sub base complete all as specified and directed by Engr-in-charge 31 M&L Machine pressed precast concrete interlocking paver block with grey cement and no pigment any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade complete all as specified and directed. 32 M&L for Sand filling underfloors or in foundations complete all as specified and directed. 33 Dismantling wall and ceiling board (fibre, pulp, insulation etc) or insulation board/ slabs/ blanket any thickness including cover filllets. 34 M&L 9mm thick prelaminated partical board, interior grade ,prelaminated one side withdecorative choice lamination and other side balancing white lamination ,fixed with nails as in wall panelling, complete all as specified and directed. 35 M&L 9mm thick prelaminated partical board, interior grade ,prelaminated one side withdecorative choice lamination and other side balancing white lamination ,fixed with nails as in ceiling works, complete all as specified and directed. 36 Dismantling timber framed in fillets, rails, posts rafters, purlines, etc under 40 Sq cm in section. 37 M&L second class softwood plain filllets, rectangular in section, clean swan, secured with nails exc 13 and n.exc 25 Sqcm. Complete all as specified and directed by Engr-in-charge. 38 M&L second class softwood plain fillets, rectangular in section,clean swan, secured with nails exc 3 and n.exc 6 Sqcm.Complete all as specified and directed by Engr-in-charge. 39 Dismantling of plain of corrugated steel sheeting any gauge, thickness including Nainital or similar pattern roof covering complete all as specified and as directed. 40 S&F Galvanised MS sheeting of 0.63mm thick corrugated with two corrugation side laps and fixed with J hooks two framed work with PVC and steel washers as in roof & wall with Zinc coating of 275 complete all as specified and as directed. 41 S&F plain, galvanised MS sheeting of 0.63mm thick in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 complete all as specified and as directed. 42 Dismantling wrought iron or mild steel work of any description not otherwise provided forall as specified and as directed 43 M&L Framed brecket of angals or tee with web and flanges cut to shape, drilled and countersunk for screw,including bending and wending angles as necessary gusset plates, riveting, etc n exc 10 kg each brackets conforming to Fe-290 Gde-E-165 Brackets over 10 kg each to be measured under Structural Steel)complete all as specified and directed. 44 M&L for Rolled sections as in main and cross beams, hip and jack rafters purlins where connected to common rafters and running rails and guides for sliding doors fixed with angle cleats or other connecting plates conformingFe 410 -W(Gde-E- 250) quality-A Fe complete all as specified and directed. 45 S&F Steel work in tubular trusses including special shaped washer etc. completed using ERW or induction butt welded tubes conforming to I.S. 1161-1979 grade St-240 complete all as specified and directed. 46 S&F plain, solid, straight chowkats of second class hard wood and frames, wrough, framed rebated on the solid, rounded or chemfered, put together with glue pinned at joints incl 30cm long hold fast conforming to Fe 290 Gde 165 of section 25x6mm complete all as specified. 47 S&F 35mm thick Plain framed, panelled shutter (two panel) 2nd class hardwood with lock rail and panel of 9 mm B.W.P. commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified 48 S&F glazed and skelton shutters of 30mm thick 2nd class hardwood open rebated and prepared to receive glass, gauze etc (without sash bars) edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing etc for windows / ventilators etc complete all as specified. 49 S&F 40 mm thick 2nd class hardwood, plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particles board medium density, wood particle board with commercial face veneers; supplied and fitted to chowkats 50 S&F butt hinges 100mm, medium weight, cold rolled mild steel and and fixed complete all as specified and directed. 51 S&F inbutt hinges 75mm, medium weight, cold rolled mild steel and fixed complete all as specified and directed. 52 S&F 100mm Extruded aluminium alloy handles, fabricated type, anodised and fixed complete all as specified and directed. 53 S&F 150mm Extruded aluminium alloy handles, fabricated type, anodised and fixed complete all as specified and directed. 54 S&F MS sliding door bolts 250 mm long clip type, stove enamelled black with bright bolt not less than 12 mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on stapple plate and fixed, complete all as specified and directed. 55 S&F MS barrel tower bolt 150mm long stove enamelled black, complete all as specified. 56 S&F MS barrel tower bolt 100mm long stove enamelled black, complete all as specified. 57 S&F of Extruded aluminium alloy handles fabricated type anodised 125 mm size complete all as specified and directed. 58 S&F 150mm Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor and fixed, complete all as specified and directed. 59 S&F Curtain rail Harrison rails, mild steel, chromium plated with fixing brackets, stops,rollers etc and fixed, complete all as specified and directed. 60 S&F in repairs Towel rail 450mm long PTMT fixed with and including cromium plated and wooden plastic clits complete all as specified. 61 S&F 3.00mm sheet glass, ordinary quality and glazing with oil putty in square n. exc 0.5 sq.m in each pane and fixed complete all as specified and directed. 62 S&F in repairs 600x450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified. 63 S&F in repair Vitreous China wash down water closet pan (pedestal pattern), white (including fixing bolts, flushing cistern,seat cover and flush pipe) and making good decoration to floor, complete all as specified and directed 64 S&F in repair Vitreous China Squatting pan/WC Orissa pattern size 580x440mm white with integral foot rests including connection to trap and to flushing pipe, anti-syphonage pipe etc, including trap set in and including lime concrete complete including making good to floor, , complete all as specified and directed 65 S&F in repair stainless steelSquatting pan/WC, Orissa pattern with integral foot rests including connection to trap and to flushing pipe, anti-syphonage pipe etc, including P or S trap set in and including concrete bedding complete including making good to floor, complete all as specified and directed. 66 S&F in repairs PVC valveless, syphonic action type 10.00 ltrs flushing cistern, low level white with inlet, ball valve, float and handle including brackets complete all as specified and directed. 67 S&F PVC Connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed. 68 S&F 15mm bore bib taps cast copper alloy, fancy type with crutch or butterfly handle screwed down, screwed for iron pipe or brass ferrule complete and fixed in repairs all as specified. 69 S&F in repairs15mm Stop valves, fancy type, chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for uniuns and fixed 70 S&F in repairs15mm bore fancy type pillar taps cast copper alloy with capsta heads, chromium plated screwed down high pressure, with or without lettered Hot or Cold with long screwed for iron pipe complete and fixed all as specified. 71 S&F in repairs stainless steel soap dish, any type, fixed to plugs with chromium plated brass screws complete all as specified and directed. 72 S&F in repairsSheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed. 73 S&F in repair 20mm Gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed all as specified. 74 Supply and Installed puff water tank capacity 1000 Ltrs insulated cylindrical vertical type double layer duly filled with glass wool with closed top hoisted and to resist in temprature (-) 30 degree to (+) 35 degree celcius fixed in position with all fittings over PCC platefrom including dismantling old/ unsv, complete all as specified and directed. 75 Supply and Installed puff water tank capacity 500 Ltrs insulated cylindrical vertical type double layer duly filled with glass wool with closed top hoisted and to resist in temprature (-) 30 degree to (+) 35 degree celcius fixed in position with all fittings over PCC platefrom including dismantling old/ unsv, complete all as specified and directed. 76 Taking up or down 15mm dia steeltubingor 16mm PVC/PPR pipe and connections etc complete all as specified and directed. 77 S&F 16mm outer dia 3-layer PP-R poly-propylene random copolymer concealed pipes SDR 7.4 (PN-16) UVstavlized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain& brass threaded polypropylene random fittings fixed complete to walls, ceiling or floors etc. all as specified. 78 Taking up or down 20mm dia steeltubing or 25 mm PVC/PPR pipe and connections etc complete all as specified and directed. 79 S&F 25mm outer dia 3-layer PP-R poly-propylene random copolymer concealed pipes SDR 7.4 (PN-16) UVstavlized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain& brass threaded polypropylene random fittings fixed complete to walls, ceiling or floors etc. 80 3-layer PP-R Polypropylene random copolymer) pipes SDR 7.4 & SDR 11 UV stablised and antimicrobial welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors of 20 mm dia incl taking up or down steel tubing and connections,including cleaning for refixing or removal to store all as specified and directed. 81 S&F in repair vitreous china wash basin, white, flat back, size 550x400mmincluding brackets complete and waste coupling of PTMT (half or full threaded) excluding taps, waste, chain and plug and porcelain stopper complete all as specified and directed. 82 S&F in repairs 10 ltr capacity PVC Low level flushing cistern including 32mm dia PVC flush pipe, fixing in position with PVC connection pipe of 15mm x 450mm long etc complete all as specified and directed 83 S&F in repairs PVC waste pipe 750mm long with cap of 32mm bore dia waste coupling etc complete all as specified and directed. 84 S&F in repairs PVC waste pipes of 40/32mm bore heavy dutythick type suitable for wash hand basins/sinks complete all as specified & directed. 85 Dismantling/taking down PVC/ Cast iron soil/waste pipes 100 mm/75mm bore inclduing all fitting like bends etc complete all as specified and directed. 86 S&F in repairsPVC (SWR) pipes single socketed in any length with rubber ring joints,laid in trenches or in floor 100/110mm bore complete all as specified and directed. 87 PVC bend any radius size 100/110mm bore with access door complete all as specified. 88 S&F in repairs PVC (SWR) pipes single socketed in any length with rubber ring joints,laid in trenches or in floor of 75mm bore, complete all as specified and directed. 89 S&F in repairs PVC bend any radius size 75mm bore with access door, complete all as specified and directed. 90 S&F in repairs 75mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement, complete all as specified and directed. 91 M&L for preparation of new steel surface of any description not other wise described, over 10cm width or girth and applying two coats of synthetic enamel paint over aprimer complete all as specified and as directed. 92 M&L for preparation of old painted steel surface of any description not other wise described, over 10cm width or girth and applying two coats of synthetic enamel paint, complete all as specified and directed. 93 M&L for preparation of newly wooden surfaces and applying two coats of synthetic enamel paint over a coat of primer complete all as specified and directed. 94 M&L for preparation of old painted wood and wood based surfaces of any description over 10cm width or girth and applying two coats synthetic enamel paint on wooden surfaces complete all as specified and as directed. 95 M&L for preparation of newly plastered surfaces of wall and applying three coats of white wash complete all as specified and directed. 96 M&L for preparation of newly plastered surfaces of wall and applying two coats of cement base paints over a coat of primer complete all as specified and directed. 97 M&L for preparation of newly plastered surfaces and applying three coats of white wash on ceiling complete all as specified and directed. 98 M&L for preparation of old plastered surfaces of wall and applying two coats of white wash complete all as specified and directed. 99 M& L for Preparation of old plastered or unplastered surfaces including preparation surface of wall and applying two coats of cement base paintwhite or tinted over a coat of primer including at any height incl necessary scaffolding /Centreing etccomplete all as specified and directed. 100 Taking down carefully damaged copper/aluminum point wiring (light/fan/socket or power) complete including fixture and fittings such as switches, ceiling roses, cassing & capping, pendants, sockets, light fitting etc and making good disturbed surfaces of wall/roof complete all as specified and directed. 101 Taking down of MCB DB/TPN 8/12 way including mcb sp and spn and making good of wall complete all as specified and directed. 102 M&L Point wiring with 1.5 Sqmm (nominal area) copper conductor FRLS cable (multi-stranded) PVC insulated and unsheathed electric cable 1100 volts drawn through PVC casing and ceiling rose sunken box/ gang box of all fitting suitable size (as per conductor run) with all fittings and accessories and including PVC insulated unsheathed electric cable 1100 volts 1.5 Sqmm (multi-stranded) copper conductor single core (green colour) as continuous earth wire connected to common earth dolly including 50mm deep box made out of sunken box with 2mm thick mild steel/ pressed steel sunken box of suitable size and shape and Modular sunken boxes for mounting light points etc covered ISI marked for following complete all as specified and directed by Engr-in-Charge. 103 All as per Srl Item No. 102 above but for one light/ fan/ Bell point controlled by one 5 Amps one way switch 104 All as per Srl Item No. 102 above but for one 3 pin socket outlet 5 Amps on independent board 105 All as per Srl Item No. 102 above but for one 3 pin socket outlet 5 Amps on same board 106 M&L point wiring for power point with 2.5 sqmm (nominal area) copper conductor FRLS cable ( multi-stranded) PVC insulated and unsheathed cable conductor 1100 Volts drawn through PVC casing and capping of suitable size(as per conductor run)with all fittings and accessories and including PVC insulated unsheathed electric cable 1100 volts 2.5 Sqmm (multi-stranded) copper conductor single core (green colour) as continuous earth wire connected to common earth dolly including 50mm deep box made out of sunken box with 2mm thick mild steel/ pressed steel sunken box size and shape and other Modular sunken boxes for mounting light points, PVC casing and ceiling rose sunken box/ gang box of all fitting suitable size etc for following complete all as specified and directed by Engr-in-Charge. 107 S&F Switch piano flush button single pole one way 5 Amps, 240 Volts complete all as specfied and directed by Engr-in-Charge. 108 S&F Socket outlet 2 in 1, 3 pin, 6A (multipurpose) suitable for 3 pin / 5 pin plug complete all as specified and directed by Engir-in-Chage. 109 S&F switch socket combination 3 pin, 5 Amps, 2 in 1 flush type (multipurpose) suitable for 2 pin / 3 pin plug complete all as specified and directed by Engir-in-Chage. 110 S&F switch socket combination 2 in 1, 3 pin, 5/15 Amps, flush type (multipurpose). Complete all as specified and directed by Engr-in-Charge. 111 S&F Modular switch 1 way 6A, 1 module, 240 Volts complete all as specified and directed by Engr-in-charge. 112 S&F Modular socket outlet 6 Amp 2/3 pin combined 3 module flush typecomplete all as specified and directed by Engr-in-charge. 113 S&F switch socket outlet 3 pin 6 Amp flush typecomplete all as specified and directed by Engr-in-charge. 114 S&F Modular switch socket combination 16 Amp 6 Pin 3 module flsh type complete all as specified and directed by Engr-in-charge. 115 S&F Lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings complete all as specified and directed by Engr-in-Charge. 116 S&FRechargeable LEDBulb 9 W ,220 V, white color all as specified and as directed. 117 S&F surface and wall mounted LED batten with polycarbonate housing and integrated electronic driver tube light fitting 22 W, 4 ft long, 220 Volts , and connecting to ceiling rose with three core twisted flexible copper cable of suitable size complete all as specified and directed. 118 S&F Ceiling rose surface backelite ISI marked with 3 terminalincluding connecting and testing complete all as specified and directed. 119 S&F MCB DB sheet enclosure,Double door type, single pole and neutral 240V with 200 Amp rated bus bar suitable size plate and common neutral link all enclosed in standard steel sheet flush mounting type factory fabricated complete confirming to IP 42/43 without MCB and with enclosure blank plates for unusedway suitable for 8 way complete all as specified and directed. 120 S&F MCB DB sheet enclosure,Double door type, single pole and neutral 240V with 200 Amp rated bus bar suitable size plate and common neutral link all enclosed in standard steel sheet flush mounting type factory fabricated complete confirming to IP 42/43 without MCB and with enclosure blank plates for unusedway suitable for 4 way complete all as specified and directed. 121 S&F 240V, 10 KA C curve miniature circuit breaker (MCB) of single poles and current carrying capacity 5 to 32 AMP, in the MCB DB Complete with connection testing and commissioning all as specified and directed. 122 S&F MCB SPN 32 Amp 240V 10 KA C curve current carrying capacity in the MCB DB complete with connection testing and commissioning all as specified and directed 123 S&F MCB SPN240V, 10KA C curve (40-63) Amp current carrying capacity in the MCB DB complete with connection testing and commissioning all as specified and directed. 124 Supply & Fixing LED light fitting 1X10W bulkhead luminaires including LED light and driver holder connecting up with three core flexible copper conductor cable of suitable size all as specified and directed. 125 M & L for GIPipe (medium grade,ISI Marked) 32 mm dia ,1.5 mtr long ,bend to shape for street light fitting bracket ,with 2x pairs of MS clamps of suitable length of size 40x5 mm of MS flat iron with nuts bolts and washer and taking out old one including connection with street light complete all asdirected. 126 S&F LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete making all necessary connection with suitable capacity of 3 core circular cable complete all as specified and directed. 127 S&F exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300mm. Make- Havells, Ventiair Dxor or equivalent) all as specified and directed. 128 S&F LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete. 129 Supply, laying,fixing, passing through pipe or laid in tranches and testing underground XLPE Insulated heavy duty electric cable with aluminium conductor 1100 Volts grade cross section area 10 Sqmm 2 Core complete all as specified and directed. 130 S&F electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc complete all as specified and directed by Engr-in-Chare. 131 M&L for earthing complete with galvanized steel earth plate electrode 600 x 600 x 6mm thick burried directly in ground not less than 2.25m deep below normal ground level (with the top edge of the plate not less than 1.50 m below the normal ground level) connected to GI earth wire 25x4 mm by means of GI bolts, nuts, check nuts and washers of GI all as shown in electrical plate No.3 of SSR Part-I connected to earthing test point with and including necessary excavation and earth work in any strata PCC pit 1:3:6 type C-1, 20mm bore medium grade GI pipe for watering 15mm bore light grade pipe for GI wire protection and funnel including 40mm thick RCC slab cover and testing on completion all as specified and as directed. Notes- 1. Earth strips & protection pipes lenth upto & including 7.5 m is deemed included in unit rate quoted by the contractor.2. Earth filling shall be done by vegitable soil. 3. Soil shall be free from stone, boulders, aggregate, gravels. 132 M&L for earthing complete with galvanized steel earth plate electrode 600x600x6mm thick burried directly in gorund not less than 2.25m deep below normal ground level ( with the top edge of the plate not less than 1.50m below the normal ground level) connected to GI earth strip size 25x4mm by means of GI boldts, nuts, check nuts and washers of GI all as shown in electrical plateNo 3 of SSR Part-I connected to earthing test point with and including necessary excavation and earth work in any strata PCC pit 1:3:6 type C-1, 20mm bore medium grade GI pipe for watering 15mm bore light grade pipe for GI wire protection and funnel including 40mm thick RCC slab cover and testing on completion all as specified and as directed.Notes- 1. Earth strips & protection pipes lenth upto & including 7.5 m is deemed included in unit rate quoted by the contractor.2. Earth filling shall be done by vegitable soil. 3. Soil shall be free from stone, boulders, aggregate, gravels. 133 Notes- 1. Deduct Schedule of Credit of as listed in Schedule A Part-II. Contract Sum shall be arrived after deducting the credit amount.
