Tender For Special Repair Of Single Offer Mess Building No Ra-16 At Sn Park Road Under Ge (North) Meerut Cantt; 1 Demolition ofbrick work or stone/boulder masonary built in cement mortar incl all quoins arches pillars etc. complete all as specified & directed. 2 M&L old size brick work with sub classfly ash bricks straight or curved on plan exc 6 m mean radis built in CM 1:6 complete all as specified and directed. 3 M&L old sizebrickwork with subclass `B bricks, straight or curved on plan exc 6m mean radius, built in CM 1:6 except bricks Complete all as specified and directed. Note :- Old serviceable bricks retrived from demolition shall be reused under this item after cleaning. 4 Dismantling, floor, hearth or wall tiling including cement mortar bedding but not backing and removing rubbish off the premises Complete all as specified and directed. 5 M&L for PCC 1:2:4 type B-1 (using 20mm graded stone agg)25 mm thick for Sub base flooring complete all as specified and directed. 6 M&L Non skid ceramic coloured tiles 7 -8 mm thick (Square/rectangular) area of each tile exceeding 0.11Sqm but not exceeding 0.18 Sqm in floors set and jointed in neat cement slurry and pointed with whiteor colour cemnt to match including 15 mm thickscreed ded in cm 1:6 Complete all as specified and directed. 7 M & L non skidcoloured ceramic tiles 7 to 8 mm (squre/ rectungular ) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm in floors set and jointed inneat cement slurry and pointed with whiteor coloured cement over 15mm thick screed bed in CM 1:6 complete all as specified and directed. 8 All as per item No 7.00 above but as in skirting over and including 10mm thick rendering in cement mortar 1:4 complete all as specified and directed. 9 M & L Coloured Glazed ceramic tiles on vertical surfaces 450x300x7mm thickset and jointed in neat cement slurry and pointed in white or coloured cement to match over 10mm thick plaster in CM(1:4)joint free with grout of matching shadecomplete all as specified & directed. 10 M&L for 18-20mm thick black granite stone slab machine cut in cooking platform, jams, pillars, windows cills and the like laid over and including 15mm thick screed bed or backing coat in cement mortar (1:4) and jointedwith grey cement slurry and pointed with white cement and with admixture or pigment to match the shade of granite stone including grinding and polishing complete all as specified & directed. 11 Taking down of chowkhats or frame with shutters (without taking off shutters from the frames) n.exc 1.50 Sqm each & removing from site complete all as specified & directed. 12 Taking down of chowkhats or frame with shutters (without taking off shutters from the frames) exc 1.50 Sqm & n exc 4 Sqm each & removing from site complete all as specified & directed. 13 S & F for Factory made double extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/Chowkhat of size 65x125 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof,water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). ® Note: For WPC solid door/window frames,minus 5mm tolerance in dimension i.e.depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be madecomplete all as specified & directed. 14 S & F for Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/Chowkhat of size 65X100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof,water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). ® Note: For WPC solid door/window frames,minus 5mm tolerance in dimension i.e.depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be madecomplete all as specified & directed. 15 S & F for 30mm thick Factory made single extruded WPC (Wood Polymer Composite) solid Moulded WPC door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N edge),minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge.(Note: stainless steel butt hinges and necessary S S screws shall be paid separately) 16 S&F powder coated anodised aluminium windows slidingtype (3 shutter type) with sash bars, aluminium sections weighing 0.55 Kg/mtr (minimum) inclstainless steel mosquito proofing wire mesh fixed with , clips, frame , necessary joining cleats, glazing clips, neoprene rubber gasket with aluminium beading screws suitable anodised fittings such as hinges, handles including powder coated anodised aluminium frame, grill with one or more rebates including S&F 5.50 mm thick black glass complete all as specified and directed. 17 M&L, in repair, 18/19mm thick Soild WPC board, exterior grade, prelaminated one side with decorative choice laminations and other side balanceing white lamination, fixed with screws to WPC frame work in cup boards, rebated or flat edged fancyhandle , Magnite lock complete all as specified and directed. 18 M&L Framed work such as grills, angle grating etc. with ends of bars shouldered and or riveted or forged into spikes, framed guard bars, railings and similar work confirming to Fe-290 Gde E-165 complete all as specified & directed. 19 M&L preparation of new or previously untreated steel surface of any description over 10cm width or girth and applying two coat of synthetic enamelover one coat of red oxide primer complete all as specified & directed. 20 M&Lgalvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or stainless steel wire staplescomplete all as specified and directed. 21 S & F 30 mm flaps Continuous (piano) hinges, mild steel, bright finish or electrogalvanised complete all as specified & directed. 22 Supply & fix 125mm size aluminium alloy handles cast type anodized complete all as specified & directed. 23 Supply & fix 150mm size aluminium alloy handles cast type anodized complete all as specified & directed. 24 S&F aluminium anodised barrel tower bolts 150mm long, of extruded section complete all as specified & directed. 25 S&F aluminium slidingbolt 300 long bolt type with bright bolt not less than 12 mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate complete all as specified & directed. 26 S&F heavy weight mild steel butt hinges 100mm in sizecomplete all as specified and directed. 27 S&Faluminium anodised barrel tower bolt with bright bolt 200 mm long.complete all as specified & directed. 28 S&F, in repair, aluminium (Die cast) body, Door closer, hydraulically regulated, designation No 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80kg and fixed.complete all as specified and directed. 29 Taking down of cementplaster of any description from brick or stone wall etc. including raking out of joints, hacking for key, scrubbing down with water etc. complete all as specified & directed. 30 M & L 15 mm thick rendering in CM 1:4 on fair faces of brick or concrete surfaces finished even and fair complete all as specified & directed. 31 M&L Rendering 5 mm thickon fair faces ofbrick workor concrete surfaces, finished even and smooth on ceiling in cement mortar (1:3), complete all as specified & directed. 32 M & Lfor applying 15 mm thick renderingin CM 1:6 on brick / concrete surfaces of external walls finished even and smooth complete all as specified and directed. 33 M&L For preparation of old surface after complete removal of existing treatment by mechanical means complete all as specified and directed 34 M&L for 1 coat of primer using roller complete all as specified and directed. 35 M&L for Two coat of OBD using roller for painting complete all as specified and directed 36 M& L preparing plastered un plasterednew surfaces on ceiling and applying three coats of white wash on ceiling surface complete all as specified & directed. 37 M& L preparing plastered un plasteredold surfaces on ceilingone coat of white wash complete all as specified & directed. 38 M&L for preparation of newly plastered surfaces of wall by applying wall care putty averaging thickness 2mm and rubbing with sand paper for making smooth surface and applying two coat of oil emulsion distemper over one coat of primerthrough roller, complete all as specified and directed . 39 M&L preparation of Complete removal of existing treatment plastered old surface of of wall by applying 2mm thick wall care putty and making the surface smooth Finishing walls and applyingAcrylic Smooth exterior paint of required shade (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)using roller for painting complete all as specified and directed. 40 M&L for applying 2 mm thick wall care putty making smooth surface complete all as specified and directed. 41 Material & Labour for applying Two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces using roller for painting . 42 S&F for 30 mm thick second class hardwood factory madeGlazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part-I, Section 8, clause 8.24 (b); supplied and fitted to chowkats complete all as specified and directed. 43 Demolition of reinforced concreteof any description and any poisition not otherwise specifically provide ( reinforcement cut to faciliatate demolition) complete all as specified & directed. 44 M&L Form work to sides and soffits of beams lintels etc finishedrough complete all as specified & directed. 45 M & L RCC 1:2:4 Type B0 (using 12.5mm graded stone aggregate) as in beams, lintels, bressummers over 1.5 m span etc complete all as specified & directed. 46 M & L precast reinforced cement concrete 1:2:4 type B1 (using 20mm graded stone aggegrate) as in Chullah hood chajja and manhole cover, kitchen shelves etc set in cement mortar 1:4.including all neccesary formwork & finishing exposed concrete surface all as specified and directed 47 Cutting chases ,pinning in brick work girth exc 10cm but n exc 20 cm and making good to facing where required and poiningein cement mortar 1:3 to ends of edges of landing, sun shades, chajjas, shelves etc complete all as specified & directed. 48 S&F mild steel TMT bars No 500D 10mm dia and over, cut to length bent to shape requiredincluding cranking, bending spirally for hooping for columns, hooking ends and binding with and including MSwire (annealed) not less than 0.9mm dia or securing clips complete all as specified and directed. 49 All as per item no 48 abovebut 6 to 8 mm dia complete all as specified and directed. 50 Taking up or down steel tubing and connection 15 mm bore pipe and removing from site complete all as specified & directed. 51 All as per Sl Item No. 50 above but 20 mm bore pipe complete all as specified & directed. 52 Supplying and laying of CPVC 25mm outer dia pipes SDR 11 & Plain CPVC SDR 11, with all fittings and fixed on walls/ceiling or laying in floors complete all as specified & directed. 53 Supplying and laying of CPVC 20mm outer dia pipes SDR 11 & Plain CPVC SDR 11, with all fittings and fixed on walls/ceiling or laying in floors complete all as specified & directed. 54 Dismantling OH water tank of capacity exc 250 ltr but not exceeding 500 ltr and removing from site complete all as specified & directed. 55 S&F triple layerwhite color 500 Ltrs Rotational moulded polyethylene (PVC) water storage tanks cylindrical vertical with closed top including nipple nuts and washers for fixing inlet, outlet/washout pipes and air vent pipes complete all as specified & directed. 56 S&F 20 mm dia ball brass valves, high pressure with polythene float and fly nut complete, screwed for iron pipe or for brass ferrule complete all as specified & directed. 57 S&F in repaircromium plated 15 mm bore size Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified & directed. 58 S&F in Floor 140mmover all length with flap door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified & directed. 59 S&F in repair 15 mm dia stop cock/angle cockcast copper alloy chromium plated screwed downhigh pressure with fancy typescrewed both ends for iron or for union complete all as specified & directed. 60 S&F in repair vitreous china ware EWC combined pattern complete with internal fittings as specified and directed by Engineer-in-Charge. Make : Cera of Cat Part No S101314L as equivalent in Jaquar or Parryware as approved by GE. 61 S&F in repair Vitreous China wash basin including pedestal, white, flat back, size 550 x 400 mm, including fixing acessories like galvanised brackets & rag bolts,32 mm CP waste coupling complete all as specified & directed. 62 S&F in repair ,PVC(SWR) floor trap, 75mm bore, plain with grating including jointing with solvent cement complete all as specified & directed. 63 S&F in repair ,PVC(SWR) gully trap, 125/110mm bore, plain with grating including jointing with solvent cement complete all as specified & directed. 64 Supply & fix PVC connections of 450mm long suitable for 15mm dia iron pipe including PTMT nuts complete all as specified & directed. 65 S&F in repair sinks made of stainless steel lmmthickkitchenorlaboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified & directed. 66 S&F in repair Brass chromium plated shower rose 125mm size complete all as specified & directed. 67 S&F in repair CP brass soap dish complete all as specified & directed. 68 S &FGrating doom 100mm dia of PTMT (Minimum weight 25gms) complete all as specified & directed. 69 Dismantling of cast iron, PVC or reinforced concrete drain pipes jointed in cement mortar and taking out of trenches if required for 110mm as 75mm bore of pipe complete all as specified and directed. 70 Supply and fix75mm bore PVC (SWR)Pipes single socketed in any length with rubber ring joints, fixed to walls and floor etc. as in waste pipe complete all as specified & directed. 71 Supply and fix110mm borePVC (SWR) Pipes single socketed in any length with rubber ring joints, fixed to walls and floor etc.as in waste and rain water pipes complete all as specified & directed. 72 Supply and fix PVC (SWR) bends 75mm bore, any radius complete all as specified & directed. 73 Supply and fix PVC (SWR) bends 110 mm bore, any radius complete all as specified & directed. 74 S&F110mm PVC (SWR) vent cowl complete all as specified & directed. 75 S&F 110 PVC (SWR) junction single, (Single T) equal or unequal complete all as specified & directed. 76 S^F 110mm PVC (SWR) Strap complete all as specified & directed. 77 S & F in repair15mm BoreWHB / WallBrass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed. 78 S&F in repair Gun metal globe or gate valves with Iron wheel head screwed both ends for iron pipe 15 mm dia complete all as specified & directed. 79 S&F in repairGun metal globe or gate valves with Iron wheel head screwed both ends for iron pipe 20 mm dia complete all as specified & directed. 80 S&F in repair factory made 600 x 450 mm beveled edge mirror 5.5mm thick of selected quality glass and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified & directed. 81 S&Fin repairs Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified & directed. 82 S&F (in repair)chromium plated towel rail 20mm dia D type 600 mm long as a approved quality.complete all as specified and directed. 83 S & F in repair 25mm dia Stainless steeldecorated curtain rod with braket and ring complete all as specified and directed. 84 Dismantling asbestos cement (corrugated, semi-corrugated, etc) sheet in roof coverings complete all as specified & directed. 85 Supplied and fixed pre- painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with hot dip galvanised self dirilling and self tapping screws neoprene and EPDM washers complete all as specified, directed and as per manufacturers instructions complete all as specified & directed. 86 S&F rolled mild steel in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc including notching, drilling, fittings, riveting and / or welding or connecting with bolts and nuts (including rivets or bolts and nuts), providing fittings angle cleats, fish plates, gusset plates etc., also for wedging, plumbing, truing up and fixing conf to Fe-410-w (Gde-E -250) quality A complete all as specified and directed. 87 Taking down old existing water proofing treatment from the top of RCC/ arch slab, including taking down existing PCC padding or plaster and hacking the top of RCC slab, cleaning with water and disposal of rubbish off the premises complete all as specified & directed. 88 Material & Labour for 50mm thick average thickness ofPCC 1:2:4 type B-O(using 12.5 mm graded stone aggregates)all asspecified and directed. 89 Material and Labour for 10mm thick cement paster in CM 1:4 mixed with WPC @ 2 % by weight of cement finised even and smooth without using extra cement on roof surface when concreate is green and wall (WPC will be measured and paid seperately as supply only rate). 90 Supply only liquid water proofing compound complete all as specified & directed. 91 Material & labour for cleaning of concrete or plasteredsurfaces of roof and applying priming coat using with bituminous primer @ 0.30kg per Sqm followedevenly by a tack coat @ 1.20 kg per Sqm using 85/25 grade industrial hot blown bitumen, over it laid with 3mm thickAPP modified polymeric waterproofing membrane reinforced with non-woven polyester fabric (weightnot less than 160 Gm per Sqm) unrolled & bonded to substrate with side and end laps 75mm & 100mm as per manufacturer’s instruction andapplying over it a tack coat using 85/25 grade industrial hot blown bitumen bitumen @ 1.20 kg per Sqm and finally finished the top of polymericwater proofing membrane with a coat of bituminous aluminum paint @ 0.20 kg per Sqm as per manufacturer’s instructions, complete all as specified & directed. (including existing water tank on roof disconnected and after cleanig same positionconnecting) complete all as specified and as directed. 92 M&L for 75mm thick cement concrete 1:3:6 type C1, (using 20mm graded stone aggregate) as in plinth protection, finishing cement concrete surfaces even and smooth without using extra cement, complete all as specified and as directed. 93 M & L 75 mm thick cement concrete 1:4:8 type D-2 using (40 mm graded stone agg) as in sub base complete all as specified & directed. 94 M&L, Broken stone or boulder Hardcore of guage n exc 63 mm, deposited, spread and levelled in layers not exc 15 cm thick , watered and rammed to a true surfaceetc all as specified and directed by engineer- in- charge 95 M&L machine pressed 60mm thickcoloured precast cement concrete interlocking paver block with pigment any shape and size conforming to IS-15658-2006, M-35 Grade over sand cushioning, ineterlocking tiles jointd filled with sand complete all as specified & directed. Note :- Sand cushioning shall be measured & paid separately. 96 M&L Sand for cushioning, including spreading and levelling in layers n exc 25 mm thick complete all as specified & directed. 97 .Dismantling wall and ceiling boads (fibre, pulp, insulation etc.) or insulation boards/ slab/ blankets, any thickness including aluminium snap grid complete all as specified and directed. 98 Material and Labour 4mm thick Nonasbestos fibre cement building boardsfixed or laid/ inserted to timber/GI/Aluminium frame work with screws complete all as specified & directed. 99 S&F Anodised aluminium snap grid frame work frame work for false ceiling complete all as specified & directed. 100 M&L ForProviding and fixing 10mm thick plaster of paris sunk or raised mouldingceiling (Gypsum anhydrous) to flat surface over 2nd class soft wood fillets, or metal frame work and reinforced with G.I. wire mesh (Fillets, metal frame work and G.I. wire mesh paid separatelycomplete all as specified and directed. 101 S&F for Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surroundingwall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55mm thickness having kurledweb of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediatechannel at 457 mm centre tocentre. complete all as specified and directed by engr -in charge. 102 Taking down carefully any type of battens or conduit point wiringwith conduit (light, fan, socket or power) complete including fittings and fixtures such as switches, sockets, ceiling roses, lamp holders, pendent light fittings, MCBs / isolators, fan regulators, tube light fittings etc removing material from site and making good disturbed surfaces of walls, ceilings etc including two coats of white / colour washing / distempering etc to match the existing complete all as directed by Engineer - in - Charge. 103 M&L for point wiring with 1.5 Sqmm (nominal cross section area) single core, multi stranded PVCinsulated, unsheathed copper conductor, FRLS cable in and including in rigid pvc conduit 20 mm dia or higher medium grade ISI marked complete with all steel conduit accessories / fittings and sunk pressed (1.2 mm thick) steel terminal switch boxes with 3 mm thick plastic laminated hard glossy surface sheet top cover,including suitable modular box,base plate and outer plate all as directed for one light/Fan/Bell point controlled by one,one way modular switch 06 Amps, including earth wire continuous of PVC insulated, unsheathed 1.5 Sqmm copper conductor, PVC insulated connected to all fittings, sunken boxes and common earth, earth dolly. Plastic sheet screwed with brass screws, cup washers ,one way modular switch 06 Amps.complete all as specified and directed for the following:- 104 One light/fan/exhaust fan/bell/buzzer point controlled by one, one way modular switches 5/6 Amps complete all as specified and directed. 105 One 3 pin 5/6 Amps socket outet point on independent board, controlled by one, one way modular 5/6 Ampswitch complete all as specified and directed. 106 One 3 pin 5/6 Amps socket outlet point on same board, controlled by one, one way modular 5/6 Ampswitch complete all as specified and directed. 107 M&L for point wiring with 2.5 Sqmm (nominal cross section area) single core, multi stranded PVC insulated, unsheathed copper conductor,FRLS, cable in and in rigid pvc conduit 20 mm dia or higher medium grade ISI marked complete with all steel conduit accessories / fittings and sunk pressed (1.2 mm thick) steel terminal switch boxes with 3 mm thick plastic laminated hard glossy surface sheet top cover, including earth wire continuous of PVCinsulated, unsheathed 2.5 Sqmm copper conductor, PVC insulated connected to all fittings, sunken boxes and common earth, earth dolly. Plastic laminated sheet screwed with brass screws, cup washers complete all as specified and directed for the following :- (a)One 3 pin socket outlet, 15 amps, with cables 2.5 sqmm size on independent board, controlled by one, one way modular 16 amp switch. 108 All as per Srl item No 104 above but using 4 sqmm copper conductor for with 4 sqmm earth wire for one 20 amps socket outlet on independent board complete all as specified and directed. 109 S/F Modular Switch, 1 Module, 6A, AC, 240V, one way ISI Marked complete all as specified and directed. 110 S/FModular Socket, 2 Module, 6A, 2/3 pin combined, AC, 240V, one way ISI Marked complete all as specified and directed. 111 S/F Modular Switch, 1 Module, 16A, AC, 240V, one way ISI Marked complete all as specified and directed. 112 S/F Modular Bell push, 1 Module, 6A, AC, 240V, ISI Marked andcomplete all as specified and directed. 113 S/F Modular Socket, 2 Module, 6A / 16A, 2/3 pin combined, AC, 240V, one way ISI Marked and complete all as specified and directed. 114 S/F Modular white cover plate with frame 1 module and complete all as specified and directed. 115 S/F Modular white cover plate with frame 2 module and complete all as specified and directed. 116 S/F Modular white cover plate with frame 3 module and complete all as specified and directed. 117 S/F Modular white cover plate with frame 4 module and complete all as specified and directed. 118 S/F Modular white cover plate with frame 6 module and complete all as specified and directed. 119 S/F Modular white cover plate with frame 8 module and complete all as specified and directed. 120 Supply & fixing of ceiling rose, 3 phase/PVC/polycarbonate isolated body complete all as specified & directed by Engineer -in- Charge. 121 Supply & fixing lamp holder (Angular / Straight), insulated body, with back plate complete all as specified and directed. 122 Supply and fixing Bell,AC , 230 volts ,Single poler complete all as specified and directed. 123 Supply & fixingLED tube light fitting T/5 surface mounting poly carbonate 240 volts 20 watts, 6500K complete all as specified & directed. 124 S&F LED Recess mounted, ceiling panel, 2x2, 36 watts, 240V light fitting with heat exchanger unitcomplete all as specified and directed. 125 S/F Wall decorative light antique type material of construction metal and glass /polycarbonate mounted Fancy light with polycarbonate diffuser prewired incl 9 watt LED Lamp of warm white/white colour compete all as specified and directed. 126 S/F die cast aluminium housing 18 watt LED Flush/surface mounting down light luminaire with driver compete all as specified and directed. 127 M&L for security light fitting 1 x35 LED type, drawn through and including GI bracket of size 32mm dia bore light grade 1.4 mtr long, bend to shape including MS clamps made out of flat iron of size 32 x 4 mm - 02 Nos and necessary nuts, bolts, washer as required complete all as specified and directed. 128 Supply & fix LED lamp 9 W 6500k, 240V complete all as specified and directed. 129 Supply and fixing sheet metal enclosure double door, single pole and neutral, AC, 240 volts, 8 way, with 200 Amps rated copper bus bar and IP - 43 protection with metal double door and flush to wall including all cutting on wall and making good including two coats of white/colour washing/distempering etc to match the existing disturbed surfaces incl taking down old u/s DBs complete all as directed by Engineer - in -charge. 130 Supply and fixing MCB, SP, AC, 240 volts C series capacity of 06 to 32Amps, 10kA and making connections complete all as specified & directed. 131 Supply & fixingIsolator, DP (Double Pole), AC, 240 volts, B series capacity 32 Ampsand making connections complete all as specified & directed. 132 S/F in repairs, 4P MCCB 125 Amp, 50 Hz, 415 V with rupturing capacity 16KA , ISI Marked, and making connections complete all as specified & directed. 133 Supply and fixing Vertical Loadline sheet metal enclosure double door, Triple pole and neutral (TP&N vertical loadline) AC, 415 volts, 04 way, with 200 Amps rated copper bus bar and IP - 54 & IK 09 protection, with the inbuilt provison forfixing of 1 No MCCB and 12 Nos MCBS inside of DB, with metal double door and flush to wall including grouting and cutting in existingwall and making good disturbed surfacewith two coats of white / colour washing / distempering etc to match the existing one complete all as directed by Engineer - in - Charge. 134 supply and fixing Exhaust fan steel body with louver and fixing accessories 230 Volt and300mm sweep complete all as specified and directed. 135 supply and fixing Exhaust fan PVC with louver and fixing accessories 230 Volt and250 mm sweep complete all as specified and directed. 136 S/F in repairs Modular Power Switch and Socket Unit with factory made poly carbonate modular box, 20A, 3Pin, AC, 240V incl 20A MCB SP and Plug Top ISI Marked complete all as specified and directed. 137 Supply and fixing fan ceiling complete with remote blades, down rods,and accessories ,230V, 1200 mm sweep. Min air delivery 210 CMM with service value 6.00 BEE.Five Star rated with Brushless direct current motor (BLDC) complete all as direced. 138 Supply and fix Water heater storage type steel body and heating element upto 2KW capacity 25 ltr, BEE 5 stared complete with a rating including providing of hold fast in wall and PVC connection 45 cm long with 15 mm dia brass union at both end heavy duty complete all as specified and derected by Engr-in-charge. 139 Material and labour for single phase sub main wiring with 06 Sqmm nominal cross sectional area, two run of single core, 1100 Volts grade, stranded, PVC insulated, unsheathed, copper conductor FR- FLEXIBLE WIRING CABLE. CONFORMING TO IS: 694-1990 with and including one run of continuous earth wire of size 6 Sqmm nominal cross sectional area, single core, PVC insulated, copper conductor cable drawing into and including rigid non metallic PVC concealed conduit of 25 mm dia, medium grade with all PVC conduit accessories / fittings, brass screws, washers etc and connected to common earth dolly including all cutting / chases etc in wall, making good to walls etc including two coats of white / colour washing / distempering etc to the disturbed surfaces to match the existing complete including taking down submain wiring complete all as specified & directed. Note:-One meter of conduit along with 3x6 sq mm wire shall be measured as one unit length. 140 Material & labour for earthing complete with galvanised mild steel earth plate electrode 60cmx60cmx6mm thick buried directly in ground (earth pit not less than 2.25mtr deep below ground level) with top edge of the plate not less than 1.5mtr below normal ground level steel earth plate connected with GI wire 04mm dia by means oflug, bolts, nuts, check nuts, washers of galvanised iron or steel GI protection pipe 15mm bore light grade all as shown in elect plate No.3 of SSR part I connecting to main switch board / Main DB’s including excavation, earth work, salt and charcoal dust mixed and packed 150mm thick around GI earth plate, GI pipemedium grade 20mm nominal bore watering pipe GI sheet funnel wire mesh, concrete pit, RCC cover in PCC 1:2:4 type B1 duly reinforced with MS Bars 6mm dia at the rate of 150mm center to center both way with suitable lifting handle and pit / chamber in PCC 1:3:6 type C1 , Angle iron 40x40x5mm frame for pit cover including testing on completioncomplete all as specified and directed.
