Tender For Construction Of Block Resource Centre At Syana District Bulandshahr - Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, for all lift, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil as per DSR No. 2.8.1 Including cost of all material, labour, T&P, all taxes and labour cess complete. But excluding GST. 2 Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, for all lift, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil. 1.50mt to 3.0 mt Including cost of all material, labour, T&P, all taxes and labour cess complete. But excluding GST. 3 Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion) Treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1 :2 (1 cement : 2 Coarse sand) to match the existing floor: With Chlorpyriphos/Lindane E.C. 20% with 1% concentration as per DSR No. 2.35.3.1 Including cost of all material, labour, T&P, all taxes and labour cess complete. But excluding GST. 4 Excavating, supplying and filling of local earth (including royalty) by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete. (Under Floor) as per DSR No. 2.25 (a) Including cost of all material, labour, T&P, all taxes and labour cess complete. But excluding GST. 5 Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete. as per DSR no 2.27 Including cost of all material, labour, T&P, all taxes and labour cess complete. But excluding GST. 6 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand (zone-lll) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) As per DSR no. 4.1.8 Including cost of all material, labour, T&P, all taxes and labour cess complete. But excluding GST. 7 Brick work with common burnt clay (non modular) bricks of class -150in foundation and plinth in Cement mortar 1:4 (1 cement : 4 coarse sand) as per DSR No- 6.1.1 Including cost of all material, labour, T&P, all taxes and labour cess complete. But excluding GST. 8 Brick work with common burnt clay (non modular) bricks of class -150in foundation and plinth in Cement mortar 1:6 (1 cement : 6 coarse sand) as per DSR No- 6.1.2 Including cost of all material, labour, T&P, all taxes and labour cess complete. But excluding GST. 9 Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level in :1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) as DSR No-5.1.2 Including cost of all material, labour, T&P, all taxes and labour cess complete. But excluding GST. 10 Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III)derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)Above Plinth Lvl as DSR No-5.2.2 Including cost of all material, labour, T&P, all taxes and labour cess complete. But excluding GST. 11 Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III)derived from natural sources : 3 graded stone aggregate 20 mm nominal sizederived from natural sources). Above Plinth Lvl as DSR No-5.3 Including cost of all material, labour, T&P, all taxes and labour cess complete. But excluding GST. 12 Steel reinforcement for R.C.C. work ready to use cut and bend rebars of approved make from factory/workshop to construction site including placing in position and binding all complete in Thermo-Mechanically Treated bars of grade Fe-500D or more. As per DSR No.- 5.22 B.1 Including cost of all material, labour, T&P, all taxes and labour cess complete. But excluding GST. 13 Providing & applying a coat of residual petroleum bitumen of grade of VG-10 of approved quality using 1.7 kg per square metre on damp proof course after cleaning the surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil. as per DSR-4.13 Including cost of all material, labour, T&P, all taxes and labour cess complete. But excluding GST. 14 Brick work with common burnt clay bricks of M-150 Class in super structure above plinth level upto floor V level in all shapes and sizes in cement mortar 1:4 (1 cement : 4 coarse sand ) as per DSR no 6.13.2 Including cost of all material, labour, T&P, all taxes and labour cess complete. But excluding GST. 15 Brick work with common burnt clay bricks of M-150 Class in super structure above plinth level upto floor V level in all shapes and sizes in cement mortar 1:6 ( 1 cement : 6 coarse sand ) as per DSR no 6.4.2 Including cost of all material, labour, T&P, all taxes and labour cess complete. But excluding GST. 16 Providing and fixing factory made ISI marked steel glazed doors, windows and ventilators, side /top /centre hung, with beading and all members such as F7D,F4B, K11 B and K12 B etc. complete of standard rolled steel sections, joints mitred and flash butt welded and sash bars tenoned and riveted, including providing and fixing of hinges, pivots, priming coat of approved steel primer, but excluding the cost of other fittings,glass panes complete all as per approved design, (sectional weight of only steel members shall be measured for payment). as per DSR no. 10.11.1 Including cost of all material, labour, T&P, all taxes and labour cess complete. But excluding GST. 17 Steel work welded in built up sections / framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc.In grantings, frames, guard bar, ladder, railing, brackets, gates and similar works as per DSR no. 10.25.2 Including cost of all material, labour, T&P, all taxes and labour cess complete. But excluding GST. 18 Structural steel work in single section, fixed with or without connecting plate, including cutting,hoisting, fixing in position and applying a priming coat of approved steel primer all complete. As per DSR NO 10.1 Including cost of all material, labour, T&P, all taxes and labour cess complete. But excluding GST. 19 Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, includingapplying a priming coat of approved steel primer.Using M.S. angels 40x40x6 mm for diagonal braces DSR No 10.5.111 Including cost of all material, labour, T&P, all taxes and labour cess complete. But excluding GST. 20 Providing and fixing cup board shutters with 25mm thick veneered particle board IS : 3097 marked exterior grade (Grade I) of approved make including IInd class teak wood lipping of 25mm wide x 12 mm thick with necessary screws and bright finished stainless steel piano hinges complete as per direction of Engineer-in-Charge. With decorative veneering on one side and commercial veneering on other side. as per DSR No- 9.130.1 Including cost of all material, labour, T&P, all taxes and labour cess complete. But excluding GST. 21 Providing and fixing magnetic catcher of approved quality in cupboard / ward robe shutters, including fixing with necessary screws etc. complete. Triple strip vertical type as per DSR No- 9.114.1 Including cost of all material, labour, T&P, all taxes and labour cess complete. But excluding GST. 22 Providing and fixing glass panes with putty and glazing clips in steel doors, windows, clerestory, all complete with 4.0 mm thick glass panes. As per IS DSR No 10.30.1 Including cost of all material, labour, T&P, all taxes and labour cess complete. But excluding GST. 23 15 mm thick cement plaster of mix 1:6 ( 1 cement & 6 course sand ) Inner Side as per IS DSR No 13.5.2 Including cost of all material, labour, T&P, all taxes and labour cess complete. But excluding GST. 24 12 mm thick cement plaster of mix 1:6 ( 1 cement & 6 course sand ) Outer Side as per IS DSR No13.4.2 Including cost of all material, labour, T&P, all taxes and labour cess complete. But excluding GST. 25 15 mm thick cement plaster of mix 1:4 ( 1 cement & 4 coarse sand )Below Plinth as per IS DSR No 13.5.1 Including cost of all material, labour, T&P, all taxes and labour cess complete. But excluding GST. 26 Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone ) finished with floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. 40 mm thick floor 20 mm nominal size stone aggregate. As DSR No. 11.3.1 Including cost of all material, labour, T&P, all taxes and labour cess complete. But excluding GST. 27 Providing & laying rectified glazed ceramic floor tiles of size 300x300 mm or more ( thickness to be specified by the manufacturer), of 1st quality confirming to IS:15622, of approved make, in colours white, ivory, grey, fume red brown, laid on 20 mm thick cement mortar 1:4 ( 1 cement: 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/sqm including grounting the joints with white cement and matching pigmrnts etc., complete as per DSR no. 11.39 Including cost of all material, labour, T&P, all taxes and labour cess complete. But excluding GST. 28 Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete. as per DSR no. 11.37 A Including cost of all material, labour, T&P, all taxes and labour cess complete. But excluding GST. 29 Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm as per DSR no 11.41.2 Including cost of all material, labour, T&P, all taxes and labour cess complete. But excluding GST. 30 Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to 1.8. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc complete. Size of Tile 600x600 mm as per DSR no 11.46.2 Including cost of all material, labour, T&P, all taxes and labour cess complete. But excluding GST. 31 Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete, on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand). Light shade pigment using white cement as per DSR No-11.20.1 Including cost of all material, labour, T&P, all taxes and labour cess complete. But excluding GST. 32 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture as per DSR no. -13.62.1 Including cost of all material, labour, T&P, all taxes and labour cess complete. But excluding GST. 33 Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gram/litre, of approved manufacturer and of required shade and colour all complete to achieve even shade and colour : New work (two or more coats) over and including water thinnable priming coat with cement primer having VOC content less than 50 gram/litre as per DSR no. -13.41.1 Two Coats Including cost of all material, labour, T&P, all taxes and labour cess complete. But excluding GST. 34 Finishing walls with Acrylic Smooth exterior paint of required shade: New work (Two or more coats applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm) as per DSR no. -13.46.1 Two Coats Including cost of all material, labour, T&P, all taxes and labour cess complete. But excluding GST. 35 Providing and applying white cement based putty of average thickness 1 mm of approved brand and manufacturer,over the plasterd wall surface even and smooth surface as per DSR no. -13.80 Including cost of all material, labour, T&P, all taxes and labour cess complete. But excluding GST. 36 Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operations: (a) Applying a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with water proofing compound conforming to IS. 2645 and approved by Engineer-in-charge over the RCC slab including adjoining walls upto 300 mm height including cleaning the surface before treatment (b) Laying brick bats with mortar using broken bricks/brick bats 25 mm to 115 mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge over 20 mm thick layer of cement mortar of mix 1:5 (1 cement :5 coarse sand ) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge to required slope and treating similarly the adjoining walls upto 300 mm height including rounding of junctions of walls and slabs. (c) After two days of proper curing applying a second coat of cement slurry using 2.75 kg/ sqm of cement admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge. (d) Finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 (1 cement :4) coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300 mm square 3 mm deep. (e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test.“All above operations to be done in order and as directed and specified by the Engineer-in-Charge : 22.7.1 With average thickness of 120 mm and minimum thickness at khurra as 65 mm. As per DSR No 22.7.1 Including cost of all material, labour, T&P, all taxes and labour cess complete. But excluding GST. 37 Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete (Copper oxidised as per IS 1378)(a) 100 mm. As per DSR No 9.66.2 Including cost of all material, labour, T&P, all taxes and labour cess complete. But excluding GST. 38 Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). As per DSR No 10.28 Including cost of all material, labour, T&P, all taxes and labour cess complete. But excluding GST. 39 Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.110 mm diameter. As per DSR No- 12.41.2 Including cost of all material, labour, T&P, all taxes and labour cess complete. But excluding GST. 40 Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete. As per DSR No-12.22 Including cost of all material, labour, T&P, all taxes and labour cess complete. But excluding GST. 41 Centering and shuttering including stutting, propping etc. and removal of form.Beam /Band as per DSR No- 5.9.5 Including cost of all material, labour, T&P, all taxes and labour cess complete. But excluding GST. 42 Centering and shuttering including stutting, propping etc. and removal of form.Column as per DSR No- 5.9.6 Including cost of all material, labour, T&P, all taxes and labour cess complete. But excluding GST. 43 Centering and shuttering including stutting, propping etc. and removal of form.Foundation as per DSR No- 5.9.15 Including cost of all material, labour, T&P, all taxes and labour cess complete. But excluding GST. 44 Centering and shuttering including stutting, propping etc. and removal of form.Slab as per DSR No- 5.9.3 Including cost of all material, labour, T&P, all taxes and labour cess complete. But excluding GST. 45 Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required. (a) White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests Including cost of all material, labour, T&P, all taxes and labour cess complete. But excluding GST. 46 Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings andfixtures complete, including cutting and making good the walls and floors wherever required :W.C. pan with ISI marked white solid plastic seat and lidIncluding cost of all material, labour, T&P, all taxes and labour cess complete. But excluding GST. 47 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require . (a)White Vitreous China Flat back wash basin size 550 x400 mm with single 15 mm C.P. brass pillar tap. Including cost of all material, labour, T&P, all taxes and labour cess complete. But excluding GST. 48 Providing and fixing flexible P.V.C. waste pipe for sink or wash basin including PVC waste fittings complete. Semi rigid pipe(a) 32mm dia Including cost of all material, labour, T&P, all taxes and labour cess complete. But excluding GST. 49 Providing and fixing PTMT soap Dish Holder having length of 138 mm, breadth 102 mm, height of 75 mm with concealed fitting arrangements. Weighing not less than 106 gms.Including cost of all material, labour, T&P, all taxes and labour cess complete. But excluding GST. 50 Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in -charge. Including cost of all material, labour, T&P, all taxes and labour cess complete. But excluding GST. 51 Providing & fixing PVC pipes conforming to IS make workinh pressure 6 Kg/cm² including testing, labour, T&P and all complete fittings. 110mm dia Including cost of all material, labour, T&P, all taxes and labour cess complete. But excluding GST. 52 Providing & fixing PVC pipes conforming to IS make workinh pressure 6 Kg/cm² including testing, labour, T&P and all complete fittings. 75mm dia Including cost of all material, labour, T&P, all taxes and labour cess complete. But excluding GST. 53 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. : Internal work - Exposed on wall25mm dia nominal dia pipes Including cost of all material, labour, T&P, all taxes and labour cess complete. But excluding GST. 54 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. : Internal work - Exposed on wall32mm dia nominal dia pipes Including cost of all material, labour, T&P, all taxes and labour cess complete. But excluding GST. 55 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. :Concealed work, including cutting chases and making good the walls etc.15mm dia nominal dia pipes Including cost of all material, labour, T&P, all taxes and labour cess complete. But excluding GST. 56 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. :Concealed work, including cutting chases and making good the walls etc.20mm dia nominal dia pipes Including cost of all material, labour, T&P, all taxes and labour cess complete. But excluding GST. 57 Providing and fixing 45 cm long unplasticised PVC connection pipe with brass unions. (a) 15mm nominal bore Including cost of all material, labour, T&P, all taxes and labour cess complete. But excluding GST. 58 Providing & fixing CP brass bib cock of approved quality conforming to IS 8931(a) 15mm nominal bore Including cost of all material, labour, T&P, all taxes and labour cess complete. But excluding GST. 59 Providing & fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. (a) 15mm nominal bore Including cost of all material, labour, T&P, all taxes and labour cess complete. But excluding GST. 60 Providing & fixing C.P. brass angle valve for basin mixer and gyser points of approved quality conforming to IS 8931 (a) 15mm nominal bore Including cost of all material, labour, T&P, all taxes and labour cess complete. But excluding GST. 61 Providing and fixing gun metal gate valve with wheel of approved quality. (a) 25mm dia nominal bore Including cost of all material, labour, T&P, all taxes and labour cess complete. But excluding GST. 62 Providing and fixing gun metal gate valve with wheel of approved quality. (d) 32mm dia nominal bore Including cost of all material, labour, T&P, all taxes and labour cess complete. But excluding GST. 63 Providing and fixing brass stop cock of approved quality. (a) 15 mm nominal bore Including cost of all material, labour, T&P, all taxes and labour cess complete. But excluding GST. 64 Providing and fixing brass stop cock of approved quality. (b) 20 mm nominal bore Including cost of all material, labour, T&P, all taxes and labour cess complete. But excluding GST. 65 Providing and placing on terrace (at all floor levels) polyethylene water storage tank of approved brand and manufacture with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. Including cost of all material, labour, T&P, all taxes and labour cess complete. But excluding GST. 66 Excavating trenches in all kinds ofsoil of required width for pipes. including excavation for sockets and dressing of sides, ramming of bottoms, including getting out the excavated soil & then returning the soil as required, in layers not exceeding 20 cm in depth including consolidating each deposited layer by ramming, watering, etc & disposing of surplus excavated soil as directed within a lead of 50m. up to 1.50 m depth, Pipes 80 mm to 300 mmdiameter Including cost of all material, labour, T&P, all taxes and labour cess complete. But excluding GST. 67 Supply & Laying of 40 mm gauge over burnt brick ballast including all materials, labour and T&P etc. for proper completion of the work. Including cost of all material, labour, T&P, all taxes and labour cess complete. But excluding GST. 68 Providing M.S. foot rests including fixing in manoholes with 20x20x10 cm cement concrete blocks 1:3:6 (1cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) as per standard design:(With 20x20mm square bar) Including cost of all material, labour, T&P, all taxes and labour cess complete. But excluding GST. 69 Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/ bore log, including hire & running charges of all equipments, tools, plants & machineriesequired for the job, all complete as per direction of Engineer -in-charge, beyond 90 metre & upto 150 metre depth below ground level. Drilling of 300mm dia bore hole manually. Including cost of all material, labour, T&P, all taxes and labour cess complete. But excluding GST. 70 Supplying, assembling, lowering and fixing in vertical position in bore well unplasticized PVC medium well screen (RMS) pipes with ribs, conforming to IS: 12818, including hire & labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer-in-charge. 150 mm nominal size dia Including cost of all material, labour, T&P, all taxes and labour cess complete. But excluding GST. 71 Gravel packing in tubewell construction in accordance with IS: 4097, including providing gravel fine/ medium/ coarse, in required grading & sizes as per actual requirement, all complete as per direction of Engineer-in-charge. Including cost of all material, labour, T&P, all taxes and labour cess complete. But excluding GST. 72 Providing and laying NonpressureNP2 class (light duty) RCC pipe with collars jointed withstiffmixtureofcement mortar in the proportion of 1:2 (1cement : 2 finesand) includingtestingof joints etc. complete. 150 mm.dia. RCCPipes Including cost of all material, labour, T&P, all taxes and labour cess complete. But excluding GST. 73 Providing and laying cement concrete 1:5:10 (1 cement: 5 coarse sand : 10 graded stone aggregate 40mm nominal size) upto the haunches of pipes including bed concrete as per standard design. 150 mm. dia. Including cost of all material, labour, T&P, all taxes and labour cess complete. But excluding GST. 74 Constructing masonry Chamber 60x60x75 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100mm top diameter, 160 mm bottom diameter and 180 mm deep ( inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size ) , i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design :With common burnt clay F.P.S.(non modular) bricks of .class designation 7.5 Including cost of all material, labour, T&P, all taxes and labour cess complete. But excluding GST. 75 Providing and laying in cement concrete 1:2:4 (1 cement :2 coarse sand :4 graded Stone aggregate 20 mm nominal size) and curing complete, excluding cost of form- work, in foundation and floors. Including cost of all material, labour, T&P, all taxes and labour cess complete. But excluding GST. 76 12 mm cement plaster in single coat on rough side of single or half brick wall finished with a floating coat of neat cement. (1) 1 cement : 3 Coarse sandIncluding cost of all material, labour, T&P, all taxes and labour cess complete. But excluding GST. 77 Providing and fixing soil, waste and vent pipes : 75mm diameter : Sand cast iron S&S pipe as per IS: 3989, 75 mm diameter Including cost of all material, labour, T&P, all taxes and labour cess complete. But excluding GST. 78 Providing and fixing in position pre-cast R.C.C. manhole cover and frame of required shape and approved quality. Circular shape 450 mm internal diameter Including cost of all material, labour, T&P, all taxes and labour cess complete. But excluding GST. 79 Providing and fixing in position pre-cast R.C.C. manhole cover and frame of required shape and approved quality. Circular shape 500 mm internal diameter Including cost of all material, labour, T&P, all taxes and labour cess complete. But excluding GST. 80 (A) Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/ bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer-in-charge, upto 90 metre depth below ground level. Including cost of all material, labour, T&P, all taxes and labour cess complete. But excluding GST. 81 (B) Supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized PVC medium well casing (CM) pipe of required dia, conforming to IS: 12818, including required hire and labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer -in-charge 100 mm nominal size dia Including cost of all material, labour, T&P, all taxes and labour cess complete. But excluding GST. 82 (C) Providing and fixing 110 mm dia PVC pipe 6KG/cm2 Including cost of all material, labour, T&P, all taxes and labour cess complete. But excluding GST. 83 (D) Shrounding and packing graded coarse sand in between bore wall & the Strainer including supply of coarse sand, labour, T&P ete required for proper compeletion of work. Including cost of all material, labour, T&P, all taxes and labour cess complete. But excluding GST. 84 (E) Providing and fixing G.I. pipe 32mm dia Nominal bore compelete with GI Fitting Including cost of all material, labour, T&P, all taxes and labour cess complete. But excluding GST. 85 (H) Submersible pump Kirlosker / Crompton or equivalent 2.0 HP I.S.I. marked.Including cost of all material, labour, T&P, all taxes and labour cess complete. But excluding GST. 86 (I) crompton 2 HP Starters Control Panel for Submersible Pump Including cost of all material, labour, T&P, all taxes and labour cess complete. But excluding GST. 87 (J) 2.5 mm Sq cable for submersible moter pump. Including cost of all material, labour, T&P, all taxes and labour cess complete. But excluding GST. 88 (K) 4 Inch dia MS clamp made with 32*5 mm flate iron with nut & bolt Including cost of all material, labour, T&P, all taxes and labour cess complete. But excluding GST. 89 (L) 110 mm dia & P.V.C endcap/ Socket.Including cost of all material, labour, T&P, all taxes and labour cess complete. But excluding GST. 90 (M) MS Polymer Sealant Adhesive for jointing P.V.C pipe.Including cost of all material, labour, T&P, all taxes and labour cess complete. But excluding GST. 91 (N) 32 mm C.P.V.C pipe Including cost of all material, labour, T&P, all taxes and labour cess complete. But excluding GST. 92 (O) Developing of bore well by over pumping and back washing till the discharge is free from turbidity not greater then 20 p.p.m. after 20 minutes of starting of pump including hiring charges of pump set, labours, T&P complete required of completion of work. Including cost of all material, labour, T&P, all taxes and labour cess complete. But excluding GST. 93 (P) Wooven PVC cloth for strainer including plastic rope, cutting holes in PVC pipe etc complete.Including cost of all material, labour, T&P, all taxes and labour cess complete. But excluding GST. 94 Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. Including cost of all material, labour, T&P, all taxes and labour cess complete. But excluding GST. 95 Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire Including cost of all material, labour, T&P, all taxes and labour cess complete. But excluding GST. 96 Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. 2 X 4 sq. mm + 1 X 4 sq. mm earth wire Including cost of all material, labour, T&P, all taxes and labour cess complete. But excluding GST. 97 Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. 4 X 10 sq. mm + 2 X 6 sq. mm earth wire Including cost of all material, labour, T&P, all taxes and labour cess complete. But excluding GST. 98 Add for Invertor wiring in wiring point for Light/Fan/Plug with 1.5 mm Cu Wire. Including cost of all material, labour, T&P, all taxes and labour cess complete. But excluding GST. 99 Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required. Including cost of all material, labour, T&P, all taxes and labour cess complete. But excluding GST. 100 SupplyingandfixingsuitablesizeGIboxwithmodularplateandcoverinfronton surfaceorinrecess,includingprovidingandfixing6pin5/6&15/16Amodular socket outlet and 15/16 A modular switch, connections etc. as required. Including cost of all material, labour, T&P, all taxes and labour cess complete. But excluding GST. 101 Supply and fixing ofLED Tube Light batten fittingsuitable for up to 1 X 22 watt LED tube light on surface complete in all respect. - CAT-AAA Including cost of all material, labour, T&P, all taxes and labour cess complete. But excluding GST. 102 Supply and fixing of recess/Surface/Pendentmounting round 6 Watt 8 Watt LED Down Lighter having Powder coated die cast aluminium housing withheat sink, diffuser/ Reflectorand driver set complete in all respect CAT-AAA Including cost of all material, labour, T&P, all taxes and labour cess complete. But excluding GST. 103 Supply and fixing ofrecess/ Surface/ Pendentmounting round10 to 15 Watt LED Down Lighter having Powder coateddie cast aluminium housing withheat sink, diffuser/ Reflector and driver set complete in all respect.. CAT-AA Including cost of all material, labour, T&P, all taxes and labour cess complete. But excluding GST. 104 Supply and fixing ofLED Street light Fittinghaving die cast aluminium body and diffuser with driver set suitable for 45 watt to 50 Watt. Confirming to IP 66 protection complete in all respect. CAT-AA Including cost of all material, labour, T&P, all taxes and labour cess complete. But excluding GST. 105 Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CM/M/W) minimum 6.00,Air delivery minimum 210 Cum/Min , 350 RPM (tolerance as per IS : 374-2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required. Including cost of all material, labour, T&P, all taxes and labour cess complete. But excluding GST. 106 Providing and fixing circular/ Hexagonal cast iron or M.S. sheet box for ceiling fan clamp, of internal dia 140 mm, 73 mm height, top lid of 1.5 mm thick M.S. sheet with its top surface hacked for proper bonding, top lid shall be screwed into the cast iron/ M.S. sheet box by means of 3.3 mm dia round headed screws, one lock at the corners. Clamp shall be made of 12 mm dia M.S. bar bent to shape as per standard drawing. Including cost of all material, labour, T&P, all taxes and labour cess complete. But excluding GST. 107 Supply of AC 230/250 Volts. 50Hz exhaust fans including providing nuts,bolts,mounting frame and other accessories including connections etc. complete as eequired300mm sweep Exhaust Fan. Including cost of all material, labour, T&P, all taxes and labour cess complete. But excluding GST. 108 Supply of Self Ballasted LED Lamps 7/9 Watt For General Lighting Service As Per IS 16102 (Only for Estimation) Including cost of all material, labour, T&P, all taxes and labour cess complete. But excluding GST. 109 Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required. Including cost of all material, labour, T&P, all taxes and labour cess complete. But excluding GST. 110 Installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required. Upto 450 mm sweep Including cost of all material, labour, T&P, all taxes and labour cess complete. But excluding GST. 111 Extra for fixing the louvers/ shutters complete with frame for a exhaust fan of all sizes Including cost of all material, labour, T&P, all taxes and labour cess complete. But excluding GST. 112 Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. 4 way (4 + 12), Double door Including cost of all material, labour, T&P, all taxes and labour cess complete. But excluding GST. 113 Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, C curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Single pole Including cost of all material, labour, T&P, all taxes and labour cess complete. But excluding GST. 114 Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required. Including cost of all material, labour, T&P, all taxes and labour cess complete. But excluding GST. 115 Supplying and fixing of 63 Amp. 4 Pole MCB (10KA) C curve, CAT-A Including cost of all material, labour, T&P, all taxes and labour cess complete. But excluding GST. 116 Supply and laying of aluminium conducter, PVC insulated armoured, served, sheeted cable 1000 bolts grade at a depth of 750mm below ground level over a cushion of 75mm thick sand alround and protected with burnt bricks on sides and top on surface, the cable run shall be fixed on M.S. clamps etc. of suitable size. or as directed by the Engineer-Incharge, complete in all respect. the armouring of the cable shall be properly connected with the earth conductor by clamps etc. 50 sq. mm 3-1/2 coreIncluding cost of all material, labour, T&P, all taxes and labour cess complete. But excluding GST. 117 Supply and burring of Safe Earthing Electrode T-19 (Hot Dip Galvanized), Length up to 2000mm, outer pipe 50mm, inner pipe 25, terminal Dia 12 mm, outer GI pipe of 16 swgand inner GI pipe of 12 swg with Hot Dip Galvanization up to 100 micron filled with crystalline conductive mixture (CCM) having anti corrosive & conductive property with 50 kgs activated soil (BFC) capable of reducing the soil resistivity with good mixture of retaining capacity along with 30cm square C.I. frame with hinged cover & masonry husing (from electrode terminal to switch board, cost of 25 x 3 G.I . strip will be extra) Make: As approved in U.P. P.W.D., & C.P.R.I. Certified. Including cost of all material, labour, T&P, all taxes and labour cess complete. But excluding GST. 118 Supplying & Laying of 25mmx3mm G.I. Strip for earthing purpose as required complete in all respects. Including cost of all material, labour, T&P, all taxes and labour cess complete. But excluding GST. 119 Supply & Erracetion of factory fabricated & wired metal clad dust and vermin proof floor mounting, M.S. Channel Base with bottom and top cable entreis Electrical control panel with TPN MCCBs (Four Pole 36 KA with thermal magnatic release)Switches Complete and instrument chamber etc.complete in all respects. The instrument chamber shall be separate and shall comprise of flush type digital metering system for phase to phase voltage and single phase voltage, current and other parameters(KVA,P.F,KW etc) in each phase with touch type selector switches for different readings, instrument fuses, current transformer etc. The panel board shall have suitable capacity electrolytic alumininum busbars as per IS8623 or above istulated with heat shrink sleeving and mountedon non hygroscopic supports such as CMC/BMC support with deteachable side covers and shall be suitable for extension on the sides. The MCCBs shall be complete with suitable cable end boxes, compression glands and indicating lamp on incoming etc.The Job includes the grounting of the board as per directions of Engineer-in charge. All out goings of 100 Amp and above shall have an Ammeter. The panel board shall be fabricated with CRCA sheet with a minimum thickness of 1.6mm/2mm. Cubicle type switch board shall be of cat A & B Only.Including cost of all material, labour, T&P, all taxes and labour cess complete. But excluding GST.CUBICAL PANEL BOARD ( MCCB TYPE )Incoming :No.200Amp. MCCB -1No.Outgoing :63 Amp. MCCB-3 No.Cat.-B. Pannel Cubicle TypeOR outgoing as per site requirment(AS/SLD) 120 S&F of 200 AMP four pole Mouled case type on load change over switch with enclosure including the cost of labour, T & P and material reuired for proper completion of the work as per direction and satisfaction of Engineer an charge. Including cost of all material, labour, T&P, all taxes and labour cess complete. But excluding GST. 121 Supply and Fixing of Fire Extinguisher ABC Type 6.0 kg. Capacity ( ISI Market IS : 15683 & TAC approved ) complete with initial charge and wall bracket, along with supply of all materials and labour for propercompletion(Firiecon/LifeGurd/Firefit/Excell)Including cost of all material, labour, T&P, all taxes and labour cess complete. But excluding GST. 122 Supply and fixing of C02 type fire extinguisher 4.5 kg. capacity(ISI Marked IS : 2878 & TAC approved) complete with initial charge and wall bracket, along with supply of all materials and labour for proper completion of work. Including cost of all material, labour, T&P, all taxes and labour cess complete. But excluding GST.
